Is it possible to integrate a mentor graphics drawing file using labview or any labview toolkit..!!!

I m having a mentor graphics drawing file having drawn with the components like resistor,capacitors etc..I need to develop an application to interface to the file using labview or adding a toolkit to labview to access the components like resistors etc .Can any body  help me about this....?
Thanks in advance...!
Certified Labview Associate Developer(CLAD)
Don't Forget to Rate the answers.!!! You can do it in few seconds

Hi Lynn ,
Basically i want to read the mentor graphics drawing file data in a labview front panel, so that i can display the components as we see in the mentor graphics development enviornement and should be able to click on the components to perform the tests associated with the same.For this,i think i need to have the BOM kind of data only as i need the components data associated with the drawing file,after this i would create a custom control for each and every component and then call the tests associated with it as soon as the user clicks on the same.I hope you understand my requirements.
Thanks & regards,
Dinesh Kumar
Certified Labview Associate Developer(CLAD)
Don't Forget to Rate the answers.!!! You can do it in few seconds

Similar Messages

  • Is it possible to overwirte data in a *.pdf file using LabVIEW??

    hi,
    i have a requirement to overwrite a pdf file using LabVIEW, i have to use coloring text also.
    i have downloaded Exaprom PDF 1.0 toolkit. but it is to generate a new pdf file.
    please suggest ideas
    regards
    phani srikanthSpell Check
    phani srikanth

    Modifying an existing PDF file is several magnitues more complicated than creating one from scratch. The PDF standard is VERY complicated and contains a myriad of features with their specific syntax elements. In order to modify an existing PDF you have to be able to understand every syntax element that occures in the PDF, or you may end up corrupting the file.
    When you create a new PDF you can pick out the syntax elements that your tool supports and forget about the 95 other procent.
    There are many PDF Toolkits than can create PDF files, a few that can open PDF files and present them, and almost none that can edit them. The Adobe PDF Editor being one of the few that can do that, but nobody is going to give away such a Toolkit for free.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Is it possible to read data from MATLAB *.mat file using LabVIEW?

    I have *.mat file from Matlab with some data. Does anybody know how to extract them from this file. I need to know the file format.
    Oleg Chutko.

    The Mathworks site is pretty good about having documentation for the formats of their file types. I recommend looking there for the format.

  • Is it possible to integrate Picasa in WP 8.1 using Picasa Web Albums Data API ? some error is showing while adding refference..i am using proper prerequisites

    Documentation : https://developers.google.com/picasa-web/docs/1.0/developers_guide_dotnet
    This link is not working for WP 8.1
    Error 3
    Cannot find type System.ComponentModel.ExpandableObjectConverter in module System.dll.
    App2.WindowsPhone
    Error 2
    Type universe cannot resolve assembly: Google.GData.Client, Version=2.2.0.0, Culture=neutral, PublicKeyToken=04a59ca9b0273830.
    App2.Windows
    using Google.GData.Photos;
    using Google.GData.Client;
    using Google.GData.Extensions;
    using Google.GData.Extensions.Location;
    Any Solution ?

    Assuming that you are writing a WinRT Phone app, System.ComponentModel.ExpandableObjectConverter is not a valid object
    for WinRT.  You can see that it's not listed here:
    https://msdn.microsoft.com/en-us/library/windows/apps/hh454035.aspx
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Is there a possibility to start the VeriStand 2014 Gateway programatically using LabVIEW 2014?

    Hello,
    This is a reload of the Is-there-a-possibility-to-start-the-VeriStand-2011-SP1-Gateway because what worked in 2011 SP1 does no more in 2014.
    I ported the code from the previous topic, do do the same thing (calling "__cdecl Int32 StartVeriStandGateway(out Int32 handle)" in "C:\Program Files (x86)\National Instruments\VeriStand 2014\Data\NationalInstruments.VeriStand.Gateway.dll".
    Doing this from a .NET programme (console or windows process) or directly from a DLL node in LabVIEW 2014 seems to have no effect, knowing the .NET code worked in 2011 even when called from a Windows service.
    Is there a new way to do it?
    By the way, the "NationalInstruments.VeriStand.WindowsRegistry.GetInstallationDirectory()" method has disapeared from the assemblies.
    Best regards,
     

    Hi Jarrod,
    You're rigth, after PC reboot the Gateway starts when calling the DLL node (OpenWorkspace & GetSystemStatus are called with no errors), but when I try to ConnectToSystem the program stays blocked into the sub-vi, although the code works well if the Gateway was previously started normally by running VeriStand from Windows.
    I tryed to change the call policy in the DLL node (UIThread & any thread) but it seems doing nothing.
    Please find here joined the test files and debug capture of the stall.
    Best regards,

  • Possible to update from old iBooks Author file using new version?

    Will the just-released new version of iBooks Author allow me to update an existing book which was created with a previous version of the software?
    I created a book in landscape mode, but placed all of the images in portrait orientation. Now that there are portrait-only templates, I want to redo the book. Will I be able to replace my book on iBooks without having to relist it?
    The new iBooks Author description states the following: "And to keep your work current, add updates by publishing new versions of your original title. iBooks will automatically notify your readers that there’s a new version of your book ready to download."

    nanobear:
    Welcome to the Apple Discussions. Do you still have the original library on our old Mac? If so, connect the two Macs together so you can manually copy the iPhoto Library folder from the old Mac into the Pictures folder of the new iMac. download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name in the owner section and Staff in the group section. You can either type in the path to the folder or just drag the folder into that field.
    Now launch iPhoto and it should inform you that the library will need to be upgraded. Select OK and the library will be converted to the latest version.
    What version of iPhoto were you running on the old Mac?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Is it possible to combine Mp4 with a SRT file using Handbrake in such as way as to be able to view on appletv3?

    Hi All,
    I have a Mp4 file and a corresponding SRT file that I wish to combine and then wach through AppleTv3.  I have handbrake as my tool for preparing video for the appleTV (through Itunes).
    I've tried to "add External SRT" but I can't seem to get teh "Burned in" button to accept a click - maybe this is not needed anyway.  I don't care if the subtitles are permanently on the screen - it's in danish so I will never watch it without the subtitles on.
    Any help appreciated.
    Regards
    Andy

    There is a website, whose name escapes me ( I am at work ) which people submit to in a variety of languages and various formats such as Extended Cut, Directors Cut etc so that you have no need to mess about with them, just add them. Also, as I said above, some are just for non-English parts so don't show subtitles if the dialogue is in English.
    Edit: found it. I use http://subscene.com/

  • Is it possible to upgrade/add a graphics card to a Pavilion dv7-7000 laptop?

    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
    Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the HM77 45W UMA Motherboard my computer has.
    Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M. 
    So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics? 
    If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
    My laptop is the HP Pavilion dv7-7025dx Entertainment Notebook.
    It has an Intel Core i7- 3610QM CPU @ 2.30 GHz, 8GB memory, 750GB hard drive (5400 rpm).
    I am currently running Windows 7 Home Premium SP1 (64-bit).
    Any other specifications can be found here:
     http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=5263030
    This question was solved.
    View Solution.

    YoureInMySpot wrote:
    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
    Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the HM77 45W UMA Motherboard my computer has.
    Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M. 
    So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics? 
    If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
    My laptop is the HP Pavilion dv7-7025dx Entertainment Notebook.
    It has an Intel Core i7- 3610QM CPU @ 2.30 GHz, 8GB memory, 750GB hard drive (5400 rpm).
    I am currently running Windows 7 Home Premium SP1 (64-bit).
    Any other specifications can be found here:
     http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=5263030
    Hi,
    You can't add a dedicated graphics card to the system like this. The vga is soldered to the board so no way you can just plug it in like on a desktop. However, you can buy a new motherboard with the dedicated graphics card on it. It also requires a new heat sink. 
    Manual: http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf
    You need a 682040-001 board plus 682061-001 heat sink to have a dedicated graphics card on your laptop. Have a look on ebay for the part numbers. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Is it possible to upgrade/add a graphics card to a Hp Envy dv7 dv7-7243cl laptop

    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Envy dv7 dv7-7243c laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
    Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the  Motherboard my computer has.
    Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M. 
    So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics? 
    If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
    My laptop is the HP Envy dv7 dv7-7243cl Entertainment Notebook.
    It has an Intel Core i7- 3630QM CPU @ 2.40 GHz, 12 GB memory, 150 GB SSD hard drive, 1 TB hard drive (5400 rpm).
    I am currently running Windows 8.1 Home Premium SP1 (64-bit).

    You're very welcome.
    I am not a PC repair tech by trade or training.
    Other than the replacement motherboard, and fan and heatsink combination, I wouldn't know if any other parts are required.
    The parts you need are listed in chapter 3 of the service manual with the part numbers.
    I also don't know if the boards come with the windows 8 product key included in the BIOS.
    There may be multiple motherboards listed, so make sure you get the right one.
    Same for the fan and heatsink.

  • Is it possible to integrate LSO 600 with an external system without SAP PI?

    Hi,
    as asked in the title, i am wondering if it is possible to integrate LSO 600 with an external (non-SAP) system without using SAP PI/XI. The external system is a middleware application which can handle RFC functions, IDocs besides the usual web service communications.
    However, i don't know how LSO and SAP PI are integrated so i wonder if their interfaces are such that instead of SAP PI another middleware could be used.

    Web Services are used. If you were to implement the services in your 3rd party middleware and configure SAP to call it, I suppose it is possible. The external course catalog can be used for CourseEnrollment and LearningProgress. See the application help for details. Don't expect to receive support from SAP with such a setup however.

  • HT204053 Good Morning, I have 2 Apple Account, will be possible to integrate each other in one account ? And if is possible, How can I do that ? Thanks, Fabio.

    Good Morning, I have 2 Apple Account, will be possible to integrate each other in one account ? And if is possible, How can I do that ? Thanks, Fabio.

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • Is it possible to add a new graphics card to my macbook pro 2011 13"

    Is it possible to add a new graphics card to my macbook pro 2011 13"?

    Hi W,
    Sorry, but no. It's soldered onto the logic board.

  • Is it possible to Integrate dos with Java to create a sample compiler?

    Is it possible to Integrate dos with Java to create a sample compiler, or do I have to write the compiler from scratch? In theory, I would like to have users enter sample code in a java text field, hit a java button that would compile/run the code, by calling a dos command prompt that would run it, and display any error messages back to the java text field. Does anyone know if this is possible? Any help would be greatly appreciated.
    Tflav23

    There is a Compiler class you might be able to use also:
    C:\jdk1.3.1_01\docs\api\java\lang\Compiler.html
    So perhaps there is no need to create a process to compile code. But I don't know if you can get information about compiler errors.

  • It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3?

    It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3? I'm trying to do so but it's not working correctly.

    Not sure this will help you !!!!
    https://blogs.oracle.com/proactivesupportEPM/entry/obiee_11_1_1_7
    Thanks,

  • Is it possible to integrate AUR into Apper?

    Hello!
    At the moment I use pacman and AUR as they suppose to be used (at least thats what I try!) to update and manage my software. Now out of curiosity I installed Apper as GUI for software management. There's two things I don't understand:
    - Is it possible to integrate AUR into the Apper software sources? Is there a plugin or something?
    - I see there's many different software management backends for RPM or tools like Portage ... can these be used in conjunction with the arch default APT? I understand that almost everything can be found within the AUR and that this is the better way but as I can't integrate it into Apper (see my question above) I wonder whether using other sources and formats could be an alternative ...
    thx for reading,
    piedro

    Arch uses pacman, not APT :-)
    Some AUR helpers can mange packages from the official repos too https://wiki.archlinux.org/index.php/AUR_Helpers , so you can use a single frontend, but I don't know if apper can do that.
    https://bbs.archlinux.org/viewtopic.php?id=159899

Maybe you are looking for