JATO 1.2 / 1.1 code generation using S1AF 2.0 in Sun1Studio 4 (update 1)

Hi Folks,
I just found that using Studio 4 when I generated the ViewBean using
RAD tools, the code is just not the code I can use with my existing
application written/migrated with Jato 1.2.
Is there any way we can generate the code as per the old JATO api
with Studio 4 and S1AF 2.0 ?
As per some of the ealier messages, it sounds like not possible.
Checking again with all of you.
Any help?

Correction: Studio 4/4u1 uses JATO 2.0. Studio 5u1 uses JATO 2.1.
Rajesh, it is true you cannot use the Studio-generated code with JATO 1.2. However, you can run your existing JATO 1.2 code with the later versions of JATO. This means that once you bring your existing JATO application into the Studio, you can continue to develop it using JATO 2.0, and existing JATO 1.2 code will continue to run with the new version.
Todd

Similar Messages

SAP RF/ Bar code generation using IM

Hi folks
Can any one experiencing in using SAP Console / Bar code generation using Inventory Management .

Please read this article
http://tdworld.com/info_systems/highlights/peak-pepco-inventory-management/
Is it possible to generate the barcoding using Handling unit or any other module without WMS ?
Thanks for your input
Jeevan

Code Generation Using Annotation Processing

I'm trying to figure out how to do something like thus:
Given this source file with the following custom annotation:
@Composite(interfaces=Mammal.class)
public class Dog implements IComposite
};I want to create an annotation processor that inserts a data member, implementation into the constructor, and a public method into this class:
@Composite(interfaces=Mammal.class)
public class Dog implements IComposite
    IComponent[] m_inner_objects;
    public Dog()
        m_inner_objects = new IComponent[1];
        m_inner_objects[0] = Mammal.compose(this);
    public IComponent getComponent(Class<?> inInterface)
        if(inInterface == Mammal.class)
           return m_inner_objects[0];
        return null;
};Are all three tasks possible? Are any of the three tasks possible? If yes to any of my questions how would I go about this. I've gotten just past the 'hello world' state in writing a custom annotation processor so I just need the more advanced knowledge of how to actually affect the code once I'm actively processing it.
cheers,

brucechapman wrote:
sednivo wrote:
I can get the CompilationUnitTree. Yes
Then I can modify it with Compiler Tree API.Really?
Where is a pitfall in my train of thought?The Tree API is an immutable API, you can look, but not modify.Here is example of modifying compiler tree.
http://svntrac.hanhuy.com/repo/browser/hanhuy/trunk/panno/src/com/hanhuy/panno/processing/PropertyProcessor.java
Also, the javax.annotation.processing.Filer will not allow you to overwrite an existing compilation unit, and you must use the Filer if you wish a generated class to be compiled in the next round.I don't use Filer class. Method writeCompilationUnit that I've wrote works well for existed files.
There is a fundamental principle of java that the same program always has the same meaning. See the 3rd paragraph of the Preface to the first edition of the Java Language Spec . >This is the reason why you can't modify existing source code.We can mark generated methods in a class with @Generated annotation.

Code generation using Visual cafe

I'm using visual cafe for GUI development. It includes it's own libraries though the equivalent ones are available in JDK.
For example: to place a component in GRid Bag layout it generates code with symantec's constructor
new com.symantec.itools.awt.GridBagConstraintsD(,...) instead of java.awt.GridBagContraints(,...) constructor.
Is there any way to tell Visualcafe to use jdk instead of it's own libraries when applicable? let me know if anyone knows how to do this?
thanks,
sampath

The simple answer is NO, or its not simple nor reliable.
The unsolicited answer is; stop using that garbage. I used it for 4 years. Symantec completely dropped the ball. I use the free Jbuilder version. It uses ALL official classes and does NOT force you into code conventions, nor does it complain about many things. VC has its own private section in the code where you can not manually edit it. headache. VC does geenrate much less anonymous classes, but all in all, try JBuilder. Maybe even Forte as I hear good things about that too.
When I converted to JBuilder, I simply changed the symanted gridbag class into the sun gridbag class. In general the symantec class is EXACTLY the same, but symantec was ahead of its time, and needed to make its own classes in order to have the GUI editing since sun didnt have completel beans available at the time. But sun has not privided these beans for years, and still symantec has not adapted. I think they are arrogant now and hope this keeps you forced into their IDE since changing seems hard(though "replace" works just fine in these situations)...

Urgent pls ! Error during Container code generation using weblogic.ejbc

HI all,
Iam using weblogic6.1 and EJB 2.0. I have to communicate session and entity ejb's and iam using local interfaces for entity beans and access the entity beans thru session ejb's. After creating my programs and jar files, when i use java weblogic.ejbc code.jar Containercode.jar, i get the following error....
--------- Error -------------
C:\Sathish\Ejb\wl6.1\LocalInterfaces\Code\ejbcgen\CodeBean_tvm2r0_ELOImpl.java:34
0: cannot resolve symbol
symbol : constructor EJBException (java.lang.String,java.lang.Exception)
location: class javax.ejb.EJBException
throw new javax.ejb.EJBException("Unexpected exception in " +
^
1 errors
Exec failed .. exiting
Can anyone say why this error is occuring......
regards
sathish

In J2EE 1.3, EJBException added a third constructor of the form:
EJBException(java.lang.String, java.lang.Exception)
WebLogic contains a file called j2ee12.jar in the lib directory that when placed in front of the classpath, disables J2EE 1.3 features and replaces them with J2EE 1.2. In J2EE 1.2 this constructor did not exist.
So in order to compile using J2EE 1.3 features, you must make sure that j2ee12.jar is not in your classpath.

Code generation from use cases

I have to build a system that inputs use cases and outputs code. I am as yet unsure how to do this. I assume the easiest way would be to go via class diagrams because code generation seems not a huge leap from there, but how would you suggest I get from the text use cases to a class diagram? Any help and pointers would be very very welcome.
Cheers,
Nicholas

If you invent this, they will have to create a new Nobel prize for computing. And we as developers will all be out of business. Best of luck.
- Saish

Export Adaptive Filter Toolkit Algorithm To C Using LabVIEW C Code Generation Toolkit

I want to evaluate the performance of some of the standard adaptive filters & have planned to use "Adaptive Filter Toolkit" from NI. Once the desired adaptive filter is selected I want to implement the same filter algorithm in FreeScale controller.
I understand that LabVIEW C code generation toolkit exports the LabVIEW code to ANSI C code. However, I'm interested in knowing if this toolkit would be able to export Adaptive filter toolkit algorithm as well (since the underlying IP would be in the form of DLL's).
Any help on this matter would highly be appreciated !!

I want to evaluate the performance of some of the standard adaptive filters & have planned to use "Adaptive Filter Toolkit" from NI. Once the desired adaptive filter is selected I want to implement the same filter algorithm in FreeScale controller.
I understand that LabVIEW C code generation toolkit exports the LabVIEW code to ANSI C code. However, I'm interested in knowing if this toolkit would be able to export Adaptive filter toolkit algorithm as well (since the underlying IP would be in the form of DLL's).
Any help on this matter would highly be appreciated !!

Error during distribution for compiled code generation-Reply

Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a®

FPGA Code Generation fails with error codes 7 and -1

Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png ‏35 KB

Hi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments

UML & Code Generation (RAD)

Hey everyone,
I'm evaluating Java IDE's right now and I'm working with a group that uses a tool called Popkin to do their design in UML. I'm trying to find a Java IDE that can import (via XMI) those diagrams to do the code generation.
Rational and TogetherSoft have integrated environments that couple the code and design (As you code, the UML is updated and as you create UML, the code is updated, etc.)
I'm wondering though, if you use something like JBuilder, how can you import the UML from another tool? Has anyone messed with Popkin before or tried to integrate something like this?
Thanks,
Will

bump
i don't care about this topic any longer, but need to give out a duke dollar, first one to respond wins!

UML code generation

Hi,
I'm developing an application of ~50+ classes in UML on JSE8 and use java code generation.
The question is about aggregations.
Navigable aggregations translate in java code to a class attribute, and to the corresponding getter/setters-methods.
A non-navigable aggregation is not translated to java code at all.
( I would expect it should translate to an attribute, but without getter/setters.
My understanding is, "navigable" means "navigable from outside the class". Correct?)
So how can I model an aggregation, which translates to an attribute in java, without generating the getters/setters?
And where can I find a comprehensive list of how elements in class diagrams are translated to java code?
Where is the JSE8-UML-manual, which includes all these details about UML code generation?
Thanks a lot for any useful hint!

Hi,
actually, the code generator is correct.
A non-navigable association should not generate an attribute.
Consider the example:
class Order -> class Date
You have navigation from class order to class date, but not otherwise.
This means that, given a Order object, you can find it's associated Date.
However, the inverse is not true: given a Date object you have no means of "navigating" or finding out which Order objects would have that date. This is what navigation means.
This should be translated into something like this
class Order{
Date theDate;
class Date{
int day, whatever;
//no ref to order-non navigable
If navigation from both classes were possible, a much more complicated code would be needed. It would be something along these lines, considering a 1-1 association (a *-1 association would require multiple order references to be stored at Date, with yet more complications):
class Order{
Date theDate;
void setDate(Date d)
theDate=d;
d.setOrder(this);
class Date{
int day,whatever;
Order theOrder; //navigation to order
void setOrder(Order o)
theOrder=o;
Care should be taken to ensure proper consistency between references (ie: the order in date should never be changed without making a corresponding change to the new order object).
All this serves to show, you should use navigation sparringly (as needed) , otherwise you're just complicating your code more than you should.
Greets
Jorge

Generic oracle eway code generation error in Java caps 5.1.3

Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
     ... 10 more
Regards,
Abdul

hi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK

Mappings code generation : regular SQL / cursor PL/SQL

Hi,
When designing mappings, I fear that code generation can be potentially dangerous, because OWB automatically chooses the best method to generate the code (regular SQL or PL/SQL).
I am looking for some examples where code generation for a mapping:
- gives a regular SQL statement
- gives a cursor-based PL/SQL
- a small change in a mapping makes a regular SQL mapping to be transformed in a cursor-based PL/SQL
Thank you
Alexandre
Message was edited by:
Alexandre Abric

I have not said that different modes executes at the same way what the use to have different options if they actually mean the same, right? I have said that they produced the same result i.e. if you expect the mapping to insert 1000 rows from the source to the target it will be done no matter which operation mode you choose.
But by different ways. To keep it simple lets say that:
set base mode will result in:
insert into target ()
select from source;
row based will result in:
begin
for a in (select * from source) loop
insert into target
end loop;
end;
Now lets assume that 5 rows from those 1000 you are going to insert, will break some NOT NULL constraint at the target.
If you choose Set-base mode entire insert from select will fail resulting no rows is inserted into target. Audit trail will contain message like constraint violated and thats it. You will have to find bad records by yourself.
If you choose Row-base mode 995 rows will be inserted (depending on mapping configuration) into the target and 5 will be listed in audit trail with the same constraint violated message.
Thats why default operating mode is Set based fail over to Row based. That means OWB will try to execute mapping in the fastest way set based, but if it fail, it will try again to accomplish the task by running in row base mode, providing complete audit trail fro bad rows.

Enhanced Flash Builder Code Generation Functionality

For voting in JIRA:
https://bugs.adobe.com/jira/browse/FB-27169
The code generation feature FB 4 currently has is only really useful for quick throwaway prototyping or very simple forms. The generation should allow you to configure formatting via default templates, AND optionally utilize a dialog box (similar to that used in refactoring but with a few extras) so that you can configure the contents of each generated function and provide appropriate function names according to coding best practices. For example:
-User initiates event handler generation
(Optional, if Codegen dialog is enabled)
-User is prompted with a dialog that allows them to customize the generated function name, and possibly specify whether they need an Event parameter passed to the function. (Default to NO event parameter, but this could be a pre-configured user option.)
-FB utilizes the customized code generation format (customizable by the developer) to generate the new function
If you need a "submitForm()" function and you want both a TextInput's enter action and a button's click action to call it, currently you're better off typing it all yourself, because auto-generation is going to put this long-named function that assumes you need 'event' passed to it. An event:MouseEvent parameter just gets in the way when you also want a TextInput's enter event to call that function, for example. Or perhaps we want to provide a more descriptive name to each handler (via dialog) without assigning IDs to each and every component: "datagrid1_changeHandler" or "button1_changeHandler" doesn't tell us what the function actually does. It's a basic coding best practice to name functions or methods after the actions they actually perform, and in a large application with complex forms auto-generated generic sounding function names are essentially useless from a maintainability standpoint.

For anyone interested, I figured it out:
to generate a CFC, you have to right-click a table in the RDS Dataview, then you can generate a CFC. You cannot generate a CFC from an AS class as described in the CF Builder help within Flash Builder.
Adobe: it would be nice if this got fixed – and if someone there replied to posts like this. You do know all this, don‘t you?

NI Motion Assistant LabVIEW Code Generation Error

Hello, the following is my current setup:
NI PCI-7334 motion control board
NI UMI 7774 splitter board
3 x NI P70530 Drives
3 x NI CTP12ELF10MAA00 Stepper Motors
3 x Power supply units for drives
LabVIEW 2010
NI Motion Assistant 2.6
Motion and Automation Explorer 4.7
I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
Thank you for your help.

Hi Joe,
I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
Attachments:
1111.vi ‏9 KB
1 axis movement.zip ‏8 KB

JATO 1.2 / 1.1 code generation using S1AF 2.0 in Sun1Studio 4 (update 1)

Similar Messages

Maybe you are looking for