Keep getting error message "The registry settings used by the iTunes drivers for importing and burning CDs ....please reinstall iTunes." I have done this several times but it doesn't help.
Keep getting error message "The registry settings used by the iTunes drivers for importing and burning CDs ....please reinstall iTunes." I have done this several times but it doesn't help.
Refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Similar Messages
-
When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window. -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
Each time I launch iTunes (latest version) on Windows 7 (w/ latest system updates) I receive the following error msg:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
When I click on "OK" iTunes completes the launch process and the application functions properly. This error msg appears without fail every time I launch the app.
I have reinstalled iTunes four times and continue to receive this message. iTunes is set in the system Control Panel as the default program for all functions that iTunes uses. I never burn CDs or DVDs and have never attempted to do so on this machine. I have had iTunes on this computer since I bought it last November and never had a problem with it until 2 months ago when this message began popping up. I did not notice any action I took that caused this, in terms of creating conflicts.
I hope someone can assist me in finding a way to stop this annoying error! Thanks!
DavidI'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
What can I do to correct this error: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes. I have reinstalled several times but it hasn't changed this error message. Why am I able to burn a CD using Media Player but not iTunes? I am using Windows XP and I have burned cds from iTunes in the past.
1: Follow this support doc to completly remove iTunes (your files remain)
http://support.apple.com/kb/ht1925
2: Download, install and run the Registry cleaner portion of the free Ccleaner
http://www.filehippo.com/download_ccleaner
3: Reinstall iTunes -
"Registry settings used by ITune drivers for importing and burning CDs and DVDs are missing." I have reinstalled ITunes but still get the same message. What should I do? bkgee
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Note I am receiving when opening up iTunes: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
Question: Do I have to uninstall iTunes and then reinstall? I am a little hesitant to do this!
NoelynHi for the message error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
Here are the resolutions I found and it fix the problem for me.
Resolution
iTunes installs a device filter which helps it work with your optical drive. If this device filter is missing, you will see the message mentioned above. To resolve this issue, reinstall iTunes to put the device filter back in place. To reinstall iTunes, follow the steps in the article below appropriate to your OS:
HERE http://support.apple.com/kb/HT1923
If you still get the pop up error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
Do this
http://support.apple.com/kb/TS3299
Good luck!
B -
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing
Error on Itunes start-up. Must click OK before Itunes will start.
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I have reinstalled iTunes using their complete uninstall instructions.
iTunes does seem to work after OK is clicked, I'm just tired of having to hit OK.
Other thoughts... This started after the iTunes update required to go to IOS 6 for my devices. I'm able to sync my devices. It is possible that ZoneAlarm (my Antivirus and Firewall) got in the way at install. It flagged something and I denied it. I was doing multiple things at the time and the flag did not have any indication about iTunes. I have tried shutting down ZoneAlarm for the install and that has not helped either.
Will try another full uninstall that includes uninstalling ZoneAlarm...I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Registry settings used by iTunes drivers for importing and burning CDs
I'm using Windows 7, started getting this error message
"The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
So, I tried an iTunes repair. Still got the same message. Then I uninstalled iTunes, still got the same message. Then I followed instructions http://support.apple.com/kb/HT1923 to completely remove all iTunes files and restart computer, then reinstall iTunes - that still hasn't worked.
My daughter's Ipod is an IPod Nano 8GB don't know how to tell what generation it is and can't find that info on the iPod or the box or the booklet... (it's her IPod that we're trying to work with here).
Thanks
TammyHi there,
You may want to take a look at the troubleshooting steps found in the article below.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/ts3299
-Griff W. -
Registry Settings for Itunes drivers for Importing and burning CDs and DVDs
I have had this issue over and over again and re installed and uninstalled many times. Recently I upgraded to Windows 7 and for a very short time had no issues. I could burn CDS and back up and did not receive the error message on loading ITunes Setup Assistant "Warning The registry settings used by Itunes drivers for importing and burning cd's and dvd's are missing. This can happen as a result of installing other cd burning software. Pleae re install Itunes." Unfortunatley I then installed DVD Fab and this issued started again. I tried to restore my pc and uninstalled DVD fab and have no other burn software on my pc and still cant get working. I still get the same error when trying to burn a playlist "no disc recording found". Please advise what I need to do in lamen's terms. Much appreciated.
have you followed instructions also on question number 11 and 12? because u told me that you have printed and i guess it only showed the words. ok. leave itunes installed and follow the >Registry instructions< also when you get to number 11 and 12 instructions, drop them down and follow them. and also follow the rest till it tells you to restart.
-
Lately whenever I open iTunes, I get that same error message. At the end of the message it suggests re-installing iTunes, but this didn't correct the error. I looked up the problem on the help and support website and found several articles describing the error and the known possible causes. The problem is since there is more than one cause, there is more than one soulution. I'm not sure about the correct action to take. I included the links to some of the articles and my system information below.
Windows Vista Home Premium
32-bit Operating System
ACPI x86 based PC
Intel Pentium Dual Processor T2390 @ 1.86 - 1.87 GHz
2.00 GB Memory RAM
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
http://www.gearsoftware.com/support/drivers.php
http://www.gearsoftware.com/wiki/index.php?title=GEAR_Powered_ProductsRefer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Maybe you are looking for
-
Hi All, I have an xy graph and i cud find that the graph cursor always seems to blink.... I never had such a problem before... Anybody knows solution for this Thanks in advance
-
Gmail Chat not working in Safari
When I go to the Gmail page, the box that usually shows up on the left hand side which lists my contacts and allows me to chat with others who are logged into Gmail doesn't show up. If I user another browser, like Camino, it does show up. I've looked
-
Here, on a unique iMac: Under user X session (admin), i can't send message with Mail App. But, on user Y session, i can. Both users use the same SMTP config! Anybody understand something? Or can resolve this issue? Thank you... Chris
-
I have created a form in Screen Painter with four folders. But when I try to access the folder item through code it says "Invalid Item". Here's a sample of the code. Private Sub sbo_Application(Byval FOrmUID As String, ByRef pVal As SAPbouiCOM
-
Hi; I search a good design using Ibatis as persistence framework (I have already studied JPetStore-5.0 example). Regards;