License Assign in Client 8.8

Hi all,
we have imported the productive license via the sap license manager. I can see the Hardwarekey, SystemNumber and the Installation Number on the Licensmanager under setting.
When I start SAP 8.8 I get all the licenses in the license administration (register components), but the SAP Client under Help (Information about) has no Hardwarekey, System Number and Installation Number. It writes -1 in Installation Number and 0 in Application ID. Therefore I cannot assign the licenses to the users!
Regards, Nick

Hi Nicholas,
This is what you wrote:
"When I start SAP 8.8 I get all the licenses in the license administration (register components), but the SAP Client under Help (Information about) has no Hardwarekey, System Number and Installation Number. It writes -1 in Installation Number and 0 in Application ID. Therefore I cannot assign the licenses to the users!"
To assign the license to a user you only need the information that appears under the licenses administratrion form and not the information under Help. Therefore, you still can assign the license to users eventhough the Help menu is "empty".
Regards
Victor

Similar Messages

Error in export license assignment

Hello gurus,
For legal regulation EAR, I'm checking 3 partner functions for destination country i.e. End user, ship-to & sold-to. I have a sales order with end user in IN (India), ship-to in US & sold-to in SG (Singapore). When assigning an export license (with destination countries as SG, US, IN in the license), I'm getting below error. It allows me to assign the license but after license assignment, the sales order continues to remain blocked. Please let me know why it remains blocked. What exactly is this error message mean?
License is required for country US SG IN (see log)
Message no. /SAPSLL/CON_CORE243
Thanks,
Satish

Hello Satish,
First of all, the function of 'Check all partner function in the partner group' is enabled per your description. In this matter, the system will only release the document if all the licenses are determined and assigned under the relevant partner country.
Yes, your assumption for not to maintain determination strategy is partially correct, this is not true for the case of function of 'Multiple license type' and 'Check all partner functions in partner group'. For these scenarios, it is not simple that any time system will release the document if one license is assigned to.
Concerning the error message 'License is required for country US SG IN', if you refer to the log in detail, which shows the system were unable to determine the licenses under the license type of country US, SG and IN, please simply maintain the appropriate license determination strategy to force system find the appropriate license type.
Also, it is also interesting to see your comment 'half baked solutions in 10.1', can you also please elaborate more on some of the things you think 'never worked the way they're supposed to'?
Thanks,
Derek

Export License assignment

Hi,
I am creating new material in R3 side and transfered to GTS system.
Please let me know License assignment for this new product in GTS is automatic process or manually we need to assign the license for each material
if it is automatic kindly let me know the process/step
Thanks

Hi ,
License to product is not assigned rather it is determined thorught Licesne determination procedure set up in GTS.
If set up is done and transaction doc from feeder system lands to GTS the license dtermination set up determine the license for a prodcut.
Basically based on Legal Reg + Country of Destination + ECCN license type is determined.
You have to carry out following Config set up for license determination .
First you have to classify your product for ECCN:
Under Numbering Scheme.
1. Define Numbering Scheme for Exp List
2.Assign Numbering Scheme of Exp List for License Maintenance
3.Assign Numbering Scheme of ECCN for Legal control
Under Classific. Master Data GTS Main menu
1.Change/Define Control Group
2.Change/Define Pecularity Code
3.Maintain Export Classification number
4.Classify Product for ECCN ,Control Group and Pecualrity Code.
License Determination Set up
Gen Settings-->Legal Reg
1.Define Legal Regulation
2.Define Legal Det Proc.
3.Activate Legal Reg
Legal Control Services
1.Assigen Leg Det Proc
2.Activate Legal Reg For Exp/Imp
3.Def Licensetype Det Proc. Assgn Det Strategy
4. Cntrl Settings Leg Cntrl Allowed Status
5. Def Cntrl Proc for Address Comaprison of License Type
6. Def Depreciation grp of License Type
7.Def License Type Allowed Status
Leagal Control-->Export GTS main menu
1. Maintain Export Licenses
2. Maintain License Determiantion Strategy
Control:
Legal Raegulation
Control Group
Country Group
Licesne Type
Hope this helps.
Kind regards,
Sameer

No more device licenses in WPF Client

Hi All,
I am working on SAP Service Manager 4.0 which was running perfectly in WPF client CRMSMWPF00_0-10013291.exe
But suddenly it started giving error - "No more device licenses in WPF client" and in Agentry Server the log shows - "Device licenses limit exceeded"
I reinstalled the WPF client but the issue remains the same.
I tested the application in ATE and the application was downloaded without any issue.
Please suggest me why I am getting this issue and what should be done to solve this issue.
Looking forward for your support
Thanks and Regards
Neha Mahanty

Neha,
See SAP KBA: http://service.sap.com/sap/support/notes/1886698
Stephen Streeter

Server License Assignment

2 SBS 6.0 Servers both at sp5.
My office has been having intermittent login problems ever since I
recovered from a hard drive crash on one of my servers and had to
re-install Netware on one a new drive.
Logging in produces a variety of results, usually to 2 or three
different users every day or so. Sometimes the login window just keeps
re-appearing after a login until a user reboots. Other times there are
messages like "An unexpected error has occurred" or "Connection to the
server was terminated" usually with an 8819 error code attached, which
points to a licensing issue.
Investigating further I find that the license assigned to the previously
crashed server is not being consumed by that server even though it is
assigned to it. I also note that the installed date is back in 2003.
This seems like the original license rather than the one I thought I had
re-installed earlier this summer.
Thanks,
Scott Schaffer
Scott Schaffer
ITSA
Olive Waller Zinkhan & Waller

Sorry, didn't see your earlier email. I solved the immediate login
problem. Yesterday afternoon I ran an unattended dsrepair. There were 0
errors but it apparently did not unlock the ds when it was finished.
This morning there was a "Cannot update NDS against an entry within
subnet container: DHCP-Subnet" and " Error (-663) occurred while saving
a backup of the NDPS Manager database files" on the our main file
server console screen. The -663 error pointed me to TID 10015560 about
the DS being locked. I followed the suggestion to run dsrepair once and
that unlocked the server and people were again allowed to login. This
server also shows the proper license consumption again.
So I am back to just the one server with no licesne consumption. I have
not yet capture a pm trace when a person logs in and has tree or server
not found. I will see if I can get that to happen today as I cannot
reproduce the login error every time.
Thanks for your patience.
Scott
Scott Schaffer
ITSA
Olive Waller Zinkhan & Waller
>>> Anders Gustafsson<[email protected]> 10/23/08 09:03AM
>>>
Scott Schaffer,
> Over the night all of a sudden my other server is no longer consuming
> it's license either and nobody can login.
>
OK. Is your DS healthy? Licenses are read from DS, so if you have DS
problems, then you will have license problems. As I said earlier: What
does the PM TRACE show when you try logging in?
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Discover the Novell forums at http://forums.novell.com
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement

KMS license activation issues client systems within child domains

KMS Server Setup:
OS: W2K12 R2
KMS ver: 2012
Multiple child domains including a single domain in which the KMS server resides. All client systems and servers are scattered across the child domains throughout the enterprise.
The new KMS server, running OS 2012 R2 and KMS 2012, sits within a separate domain. All systems will eventually get migrated to this domain. I have two (2) KMS servers I plan on using to accommodate the pending activations. From reading I think you're allowed
to have a totla of six (6) KMS servers.
I've modified DNS to include placing the two servers within a security group and granting that group Full control permissions on the new _svc record.
As of right now I'm able to discover servers and client systems scattered across the enterprise. I've also confirmed the ability to update license status on a number of servers.
When attempting to update license credentials on client systems I get the following error:
Unable to connect to the WMI service on the remote machine.
I've come across a few systems that I've been able to update, most sitting within the same location. So I'm a little confused on how best to troubleshoot this issue.
In addition I have a few Macintosh systems running a virtual parallel of Win7 that are also getting this error when attempting to activate.
I've had other instances where when attempting to update license status the office products will get activated but not the OS.
This issue only occurs on client systems so I'm hoping to get some direction as I've ruled out firewall and blocked ports as the cause.
Any response appreciated.

remote WMI needs a few things to work;
a) networking/routing (can the destination machine be resolved by name? can you route to the destination machine?)
b) permissions (is the account you are using to connect to the target, permitted or denied?)(is there a trust?)
c) is WMI and DCOM on the target machine, healthy/configured correctly?
d) can you successfully connect/authenticate to the target machine, using tools such as msinfo32, compmgmt.msc, "WMIC /node:computername csproduct get name"
some useful tips:
http://technet.microsoft.com/en-us/library/hh672144(v=office.14).aspx
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-can-t-connect-to-remote-wmi.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

From list of IAP's in Aruba Central, how do I select only a few of them for license assignment?

Q: I have hundreds of IAPs in the device management page of Aruba Central. How do I select only a few of the them to assign license?
A: Especially, when there is huge list of IAPs showing up in the device management page of Aruba Central, it becomes difficult and time consuming for an administrator to assign license for each IAP and then move on to the other.
This problem was sensed by the Aruba Central development team before hand and put up a solution in place that would help a user to select multiple IAPs from the list and assign licenses to them at once.
Lets understand on how to do the same:
1. Once you login to Aruba Central, click on "All Groups" and move on to 'Device Management" under Maintenance.
2. In the right-pane, you would be presented with the list of IAPs.
3. Now , click on the "Search tool" and it pulls down the fields to enter the search text.
(NOTE: Make sure you have selected ALL in the above drop down. This helps central to search among all IAPs irrespective of group and license assignment.)
4. Enter the Serial Number or MAC address of the IAP or Switch and hit "Search"
5. Here is where the intelligence of Aruba Central comes to play.
From the search result select the IAPs and Central would remember your selected IAPs, even if you change the search string and initiate an other search.
6. Once you finish searching all IAPs that you want to, you can click "Assign License" button in the lower left-corner and move on assigning the licenses to the selected IAPs

This was a life saver! I even started to manually tick the box as well!

Assigning AnyConnect Client Profiles based on the machine?

I have an ASA running 8.2.x code with AnyConnect 2.4.x.I have both Radius and LDAP (AD) AAA available.
If a user connects from a company owned laptop, I want to push down AnyConnect client ProfileA (with scripts to map drives etc...) and network ACL's set A.
If a user connects from any other computer, I want to push down AnyConnect client ProfileB (no scripts etc...) and network ACL's set B.
What I would like to do is CSD to do a machine certificate check (for presence of a cert from my private CA) and to assign a EndPoint Policy attribute (Managed on successful check or Unmanaged on failure). I can then use DAP to tailor the ACL's that get set.
It seems like the only way to handle AnyConnect client profiles is with Group-Policy. Using LDAP I can assign a user to a Group-Policy, but I have no way of determining is they are coming in from a company laptop or not when assigning the Group-Policy. DAP can not assign an AnyConnect client profile.
If at all possible, I do not users to have to pick a conenction profile or use different URL's.
Is there anyway to accomplish this?

Hi
Did you ever resolve this issue? I am trying to assign a specific IP address based on the hostname or machine cert but the certificate matching doesn't seem to look at the machine cert.
Has anyone got any idea how I could do this?
thanks
Steve

Update license assigned documents when a position in rejected

Hi,
we have a license that belongs to a customer and have some assigned documents.
In one of this documents we have rejected some positions (not deleted) but the license doesn't update these positions, so the licensed has exceeded the maximun quantity allowed and we can't create another sales order.
Is there any note that helps me with this trouble????
Thanks,

njcm wrote:
When I connect to i tunes it tells me I need to download version 10.6.3 but when I attempt this nothing happens! Can anyone help?
10.6.3. of what? What is telling you this?
What preceded this? Were you attempting to update the phone to iOS 6? It can take quite a while.
If the phone is running iOS 6, that requires iTunes 10.7, which requires OS X 10.6.8 on a Mac. Maybe that's what you're seeing...
You really need to give us more information.

Cannot connect license manager in client PC

1. Select any company then press OK (client PC)
2. A window will prompt up, and request input the license server address. However, even I type the hostname and IP error message also occur (client PC) - License error: -2147024891
3. I checked in server manager, the license server already run (SAP server)
P.S. only one client PC reported this problem, what can I do to solve the problem? Uninstall the client program and run again. Or, change the license server from 127.0.0.1 to 192.168.0.50 (the server IP address)

Hello Dannis.
To access a license server correctly, you need to specify its ip address and port number. The port number used to be 30000, and you wrote that the ip address is 192.168.0.50.
If it doesn't work by writing 192.168.0.50:30000 as license server, check if your firewall is blocking the traffic on port 30000. You can also try to disable your firewall, in order to make sure whether your firewall is the culprit.
HTH,
Martin

License for XE Client and non-XE server

Hi,
I want to use the XE Client to access a non-XE server. The license agreement states:
Any use of the Oracle Database Express Edition is subject to the following limitations;
1. Express Edition is limited to a single instance on any server;
2. Express Edition may be installed on a multiple CPU server, but may only be executed on one processor in any server;
3. Express Edition may only be used to support up to 4GB of user data (not including Express Edition system data);
4. Express Edition may use up to 1 GB RAM of available memory.
Does that mean that I cannot use the XE Client for accessing a non-XE database?
Or can I freely distribute the XE Client together with my application?
Thanks,
Nils-Olof Wilske

Here's the way I'd read it:
The XE client is freely distributable, but the intentions are that you're using that with the XE-server.
If your non-XE server is licensed by the processor, I don't think Oracle cares which kind of client you use with it. If your non-XE server is licensed by the named user, you would still need to have licenses for those connections, no matter which client they were using, whether it be XE, Instant, Standard, etc.
You can't use the XE client to get around named user licensing requirements.
Was that the intended question, or was it strictly a question about distributing the client with your applications?
~Jer

License assignment

I have created users and imported license file on test database, now I want to assign licenses on production database.
How this can be done ?

Hi,
In Test database go to
Administration -> Licence -> Licence Administration
You should see your available licenses on the right. Simply highlight the relevant users on the left and untick the boxes on the right (the available licenses will go up each time you untick a box)
Then connect to the Productive database.
Go to
Adminisration -> Licence -> Licence Administration
You should see your available licenses on the right. Simply highlight the relevant users on the left and tick the boxes on the right (the available licenses will go down each time you tick a box)
Regards
Mario

Assign resources client specific

Hi,
I was wondering if there is a possibility to assign resources such amount of Background processes, memory, CPU on client specific basis, saying client 100 can e.g. only use 10 out of 20 background processes and tehre wont block process launched from other clients.
Thanks in advance for your feedback
Best regards
Torsten

Hi,
Its system specific. Hence you cannot assign resources such as background jobs individually for a client.
Rgds,
Soujanya

Enhancement set assignement to client which is not in Dev box

Hi Friends,
How to create an entry in BSPWDV_EHSET_ASG for client which is not in DEV box. 800 client is not there in Dev box but its there in Q system. when i try to create directly in Q system its asking for transport request any suggestions.
Regards
Muthappan

Hello,
I think you don't have so many choices:
1) Either you add your entry in your quality system manually (create a transort request that you can delete afterwards)
2) Or implement 2 lines of coding in BADI COMPONENT_LOADING...
Kind regards,
Nicolas.

Assigning a client to a "Route schedule"

Hi Experts
How can I assign a customer to a "Route schedule" (LIKP, AULWE) so that once I create a delivery for this customer (VL01N), the "route schedule" is brought automatically by the systeme.
Thanks
Hachim

Hi,
As per my understanding Route schedule is assigned to a route and required to be activated at shipping point, sales document type and delivery type level.
I doubt if it can be assigned to a particular customer in standard SAP.
The rout for a customer is determined thru transport zone of that customer and shipping point and shipping condition.
Whatever the schedule you have maintained for that rout will reflect in sales document.
http://help.sap.com/saphelp_46c/helpdata/en/35/b0e83887a62488e10000009b38f9b7/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/dd/560e08545a11d1a7020000e829fd11/frameset.htm
Regards,
Abhee.

License Assign in Client 8.8

Similar Messages

Maybe you are looking for