My iPod 4th gen sound won't work when I plug in my earphones and ALL EVERY sound is disoriented

When I plug in my earphones my sound of EVERY thing is disoriented and I already reset my iPod ( to factory settings) and inserted the headphones like 30 times and blew into it and still it doesn't work

Hi Jannine2131,
Based on your description, it sounds like you may need to have your iPod Touch serviced. You may find the following page helpful:
Service Answer Center - iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
- Brenden

Similar Messages

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • My Ipod 4th generations Camera won't work, how do I fix it?

    My Ipod 4th generations Camera won't work, how do I fix it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones again on my IPod touch?

    My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones with my IPod touch?

    You likely have a problem with the headphone jack.  You jhave to ways to listen to music via headphones:
    - Get the jack fixed.  Here is one place:
    DigiExpress.us - The iPad Repair Professionals
    However first I wold rule out a software problem by try the following:
    Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults.
    The other way is to use bluetooth headhone if you have a 2G or later iPod.

  • My iphone text tone is not working when I plug in the earphone.

    Hi,
    My iphone text tone is not working when I plug in the earphone.
    My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
    As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
    Anyone pls help.. the problem still there even I updated..

    goh steven wrote:
    hi wjosten
    I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
    The iPhone is working exactly as it is designed.
    Your options are:
    1) Unplug the headset.
    2) Leave the headset plugged in and the earpiece in your ear at all times.
    3) Turn on vibrate and put the phone in your pocket.
    4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
    This is a user to user forum, these are the only solutions we can offer you here.

  • Ipod 4th gen does not play music from list automatically. just plays one and repeats it.

    ipod 4th gen does not play from list automatically. it just plays one at a time and then repeats it until i select another.
    how do i set it to play all on playlist?

    On the left side of the Now Playing screen right below the scrubber bar is the repeat control. It is the arrowed racetrack icon. Tap the icon until it is white for no repeat.

  • HT1363 hi, i use an old but great black photo/video ipod. Suddendly it won't recharge, when connected it emits several clicks and an ipod icon appears together with the apple support email address. I have tried to restore and reset but it won't work. Any

    hi i use an old black 60G photo/video ipod. Suddenly it won't recharge, when connected to the pc it emits several cicks in serires and then it shows at intervals a low battery signs and another sign, a sad faced ipod icon with the apple support email address. Any clues and to how I can rescue it? Thank you very much. Alf1962 

    I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
    When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
    Message was edited by: shenards
    Message was edited by: shenards

  • HT201210 I've tried everything but it still won't work, when I plug my ipod (4th gen.) into the computer it says that the latest operating system is 4.2.1

    when I plug my ipod into my pc it says the latest iOS is 4.2.1. I've tried restarting the ipod, updating itunes etc. but nothing is working.

    Did you check your model here?
    Identifying iPod models
    Or by entering your serial number here?
    Klantenservice: Serienummers

  • Ipod 4th Gen Shuffle Feature Not Working...

    I have a new Ipod Shuffle 4th Gen and I have a many playlists which appear to be working except for one. I have one playlist called "jogging" which the Ipod voiceover speaks when pressing the button. However, when I select it, the track will not play. This particular song/track is 1 hour and 3 mins and is a collage of songs. Is there some reason the shuffle will not play it? It's an M4A file and Itunes says it's synched with the shuffle. When you select that playlist, it starts playing a song in a different playlist like it doesn't exist.

    ps. Other playlist selections give one beep. When I select the playlist with the 1 hour file, I get two beeps.

  • I have a new ipod nano 7th Generation.  When I plug in the earphones, there is no sound, althought ipod shows song is playing.  Any solutions?

    I have a new Ipod Nano 7th Generation.  When I plug the earphones in, there is no sound coming from the earphones, even thought the Ipod shows the song as playing.  Any solutions?

    And the Radio app probably doesn't work either.
    The headphone jack on the nano is very tight when new. Push the jack all the way in, the plastic on the headset jack should be flush with the body of the nano.

  • Sound doesn't work when I plug in my monitor to HDMI port

    I have a new HP Envy15laptop and an older AcerAC2016W with VGA connection.  I purchased a vga to hdmi adapte cable.  When I plug in my monitor, the sound shuts down.  If I unplug the monitor the laptop speakers work fine.

    Hi,l I don't know which VGA to HDMI cable you are talking about but VGA does not carry sound and your machine may think it use HDMI sound therefore it shuts down sound with HDMI, if you wish to use sound from your computer you need to disable HDMI sound: Right click speakers icon > Select Play back devicesSelect use internal sound  and disable HDMI sound (if it was there) You have to enable it when use pure HDMI (ie from HDMI to HDMI TV for example) Regards.

  • My ipod 4th gen home button is stuck when i press it it dosent work so how can i fix it? i dont want to use assistive touch

    please i need help now and fast thank you

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • IPOD 3rd Gen. Won't work with ITUNES 7?

    That's about it. Since I updated ITUNES my 3rd generation (20 GB) ipod won't respond (ITUNES says that I have to update it, won't let me)
    Suggestions?

    Hello,
    Are you syncing with your PowerBook running 10.5.8?
    You can't have the lastest version of iTunes installed as the lastest version of Itunes requires Mac OS X 10.6.8 and above
    Which version of iTunes have you installed? Go to iTines top left and then about iTunes.

  • My ipod 4th gen just randomly shut off when I was on twitter today. I tried to reset it by pushing the home and lock button down at the same time but it still wouldn't work even after 40 seconds. And it was about 3/4 charged help please!!!!

    The apple icon only shows up for less then a second and I even plugged it in.. Please help me... PLEASAE!!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an ipod tough 4th gen It won't turn on I tryed holding both buttons and still nothing itunes says its in recovery mode but i keep gettin error code 28?? I have no clue on how to fix it!!

    I've only had it for 4 months maybe 5 and it stoped working 3 months after I got it. I've tryed everything and nothing works:(

    Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
    Above from:
    http://support.apple.com/kb/TS3694

Maybe you are looking for

  • Add current Date/Time to a database note?

    If we set the database note when we are loading the cube, what would be the syntax to set the current date/time?<BR><BR>For example...<BR><BR>ALTER DATABASE <NAME> SET NOTE <COMMENT><BR><BR>What would go in <COMMENT> in order to set current date/time

  • PI 7.1 Multiple calls of BAPI

    Dear all, We have a file to RFC scenario; the file consists of multiple invoices which should be posted with BAPI_ACC_DOCUMENT_POST. As described in the Weblog of Michal Krawczyk (XI: IDoc bundling - the trick with the occurance change) I have export

  • Creating Company Codes in Global Roll-out Project

    Dear Experts Our Company operates out of multiple countries and we have embarked on implementing SAP across all our subsidiaries in these countries. We are planning on a Single Instance Single Client Landscace. With this in mind, we have completed th

  • Thinkvantage CSS Password Manager Import Problem

    Good morning, I have run into a bit of a problem. Backstory:  About a month ago my HD crashed on my T61, and since I was thinking about upgrading to Win7 Professional from XP Pro SP3, it seemed like the perfect time since I had to do a clean install

  • Request Adobe to provide particular vesions API list.

    request Adobe to provide particular vesions API list. There is no way to pick out the list of API in some particular versions. If it is possible, it will be so helpful for many developers. I made discussions about this three times, But Adobe employee