Need help with Time Stamps and saving Strings in Excel

Hi, Am learing LabView now....and my task is
Everytime start button is pressed, a Random number must be generated.
The Random number is to be staroed in an Excel sheet such that the Random Number is in the first column and Time at which it was generated in the second column...
I used to work with Agilent Vee before and am finding it hard to adjust to LabView
Thanks
Sanjay

Am making the same mistake again......
Here yougo in LV 8.5 version....
The best solution is the one you find it by yourself
Attachments:
Time Number.vi ‏12 KB

Similar Messages

New user needs help with time machine and mac server.

I am a new mac user and got a new mac mini running server. I have time machine enabled on the server and a back up folder created. My macbook will not see the server when trying to set up time machine from the macbook. What am I missing? Thanks.

Unfortunately even though Apple had touted the AEBS USB2 HD use with TimeMachine (TM) they pulled it from the Leopard TM feature list about 1 week before releasing Leopard GNBuild 9A581.
At this time Apple does not support use of the AEBS USB HD for use TM.
I strongly suspect we will see this feature return in one of the next two updates Apple releases for Leopard.
In the meantime be patient and I don't recommend you use a hack to circumvent the current TM limitation.

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

Need help with Adobe Interactive Form Saving

Hi Gurus,
I need your help with Adobe Interactive form saving.
I have written the code in pre-save event to prompt a message when user didn't enter any value before saving. The form data should not be saved upon clicking save (Just prompt the message and exit form the form). Can u please advice me how to do this.
Regards,
Srini

see the link: http://forms.stefcameron.com/2008/04/
it says:
preSave: Failed validations will not prevent the form from being saved however Acrobat/Reader will issue a special warning message, after issuing the validation error message, to inform the user that the validations failed. Iu2019m guessing this is because the user may be saving the form to continue filling it at a later time so the save canu2019t be completely prevented.
regards,
BJagdishwar.

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Help with Time Evaluation and function exit (HRPTIM03 / SAPLHRLV_001)

Hello,
Hopefully someone can help me with an issue I am having with time evaluation and a user exit I wrote. The code for my exit is at the end of this post. IN DEV and QAS, everything works. However, in PRD, multiple rules are considered fulfilled (when looking in PT60), and so employees get two sets of vacation entitlements per month.
We have three rules for quota type 03 (vacation). Rules 3,6, and 9. Only rule 9 should apply to the individuals with the two job numbers in the code.
Any help would be greatly appreciated.
Shane
WHEN ABSENCE QUOTA TYPE IS 3 (VACATION)
CASE XT559L-QTYPE.
WHEN '3'.
CASE - COMPARE SELECTION RULE FOR ABSENCE QUOTA TYPES
CASE XT559L-ACCNR.
WHEN RULE SELECTED IS 009
    WHEN '9'.
    IF JOB NUMBER IS 5084 OR 3084, THEN THE RULE APPLIES
      IF XP0001-STELL = '5084' OR XP0001-STELL = '3084'.
        XSUBRC = '0'.
    OTHERWISE, THE RULE DOES NOT APPLY
      ELSE.
        XSUBRC = '1'.
      ENDIF.
WHEN ANY OTHER RULE IS SELECTED
    WHEN OTHERS.
    IF JOB NUMBER IS 5084 OR 3084, THEN THE RULE DOES NOT APPLY
      IF XP0001-STELL = '5084' OR XP0001-STELL = '3084'.
        XSUBRC = '1'.
    OTHERWISE, THE RULE APPLIES NORMALLY
      ELSE.
        XSUBRC = '0'.
      ENDIF.
ENDCASE.
WHEN OTHERS.
ENDCASE.

The problem was that even though the code was transported to PRD, and listed as Active - it still was not activated, and had to manually be done though CMOD.

Need help with show/hide and layers moving

I'm more of a designer, so I don't know code or CSS well at
all. I'm doing an online portfolio for a class and need help with
layers not staying in place in different browsers. The portfolio is
created with a table, but I wanted to use the show/hide function
for thumbnails of work. Are layers the only way you can use this
function? I read layers don't work well with tables, so how else
can I make it so when you mouse over a thumbnail, the larger image
appears in another cell?

> I don't know code or CSS well at all.
That's unfortunate.
> layers not staying in place in different browsers.
Layers don't move. But the rest of your page does.
Before you get too wrapped up in layers, though, please read
this -
http://www.great-web-sights.com/g_layerlaws.asp
They are not good when be used as a primary layout method.
> I read layers don't work well with tables
They work fine with tables - but you have to understand both
tables and
layers to use them.
Why not show us your page, so we can see what you are
struggling with?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Bobbi67" <[email protected]> wrote in
message
news:ertd9h$h3m$[email protected]..
> I'm more of a designer, so I don't know code or CSS well
at all. I'm doing
> an
> online portfolio for a class and need help with layers
not staying in
> place in
> different browsers. The portfolio is created with a
table, but I wanted to
> use
> the show/hide function for thumbnails of work. Are
layers the only way you
> can
> use this function? I read layers don't work well with
tables, so how else
> can I
> make it so when you mouse over a thumbnail, the larger
image appears in
> another
> cell?
>

Formatting a string with time stamp and double precision numbers

%s\t%f\r%f
This is a format string that I have in old code that I've decided to change. Problem is I cannot make sense of the string codes in my own old code! Let me explain what I want, and hopefully someone can explain how to do it.
I am using the format into string subvi to merge a time stamp (formatted as %m%d%Y%H%M%S%5u) and two different double precision numbers. This string is then wired into the Write Characters to File subvi so that I can record data as a .txt file, and open it in either Matlab or Excel. There is a minor problem with the string format above because in excel the first time stamp entry is blank, and the first loop only gives the two double precision numbers withouth the time stamp - the time stamp appears in the next loop (probably a looping issue and not due to the string format, but if you see differently please let me know). Now what I want to do is 1. potentially fix that problem and 2. add some more doubles.
1. Is there a string format issue that is evident that I am not seeing that causes the time stamp to be formatted into the string after a carriage return? Or should I be looking at looping issues?
2. How do I add another one - three floating point numbers (double precision)? Are the \'s marking different numbers in this string constant? Or is it the %? I can't find any information about the \'s, but I see that % begins the format specifier.
Ideally, I want these data in the following columns: Date, Time(absolute), FP, FP, FP, carriage return for the next loop (FP is floating point double precision number).
Thanks,
Brad

Hi JonN,
Here there is no need of string concordinate function (in your code), the same result you can find if you connect the output of the format string to shift register, and shift register in data to initialize string connector in format into string function.
<<KUDOS ARE WELCOME>>
ELECTRO SAM
For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
- John 3:16

I need some help with Game Center and saving games to it

I was playing the new app called clumsy ninja on my iPad. I had gotten pretty far an decided it would also be fun to be able to play from my iPhone. My I phone was already logged on to Game Center, but my iPad wasn't. So when I logged no to Game Center from my iPad, it had saved my level one game from my iPhone, I was all the way on level twenty four on my iPad. I tried to undo it but every time I opened up the app it was my level one game from my iPhone. I really need help. What should I do?

That's weird I just noticed that if I change the Screen Saver selection, that I have to check then uncheck the (Main screen only) box to reset the preference before it works. Even weirder I also noticed that for some screen saver selections the iMac display and TV show different photos that both change an the same time.

FINDING, TIME STAMPING, AND SAVING SELECTED PORTIONS OF WAV FILE

Hello Everyone,
LV 6.1
What I'm trying to do is build an app that
captures, timestamps and saves peaks only in a *.wav file from the sound card.
Specifically, dog barking. My dream would be that I have a constant input
from a mike into the sound card which LV will real time analyze. When a threshold is triggered
(a dog bark) the app will save the bark only with a time stamp. My case against
my neighbors would be better exemplified is I were able to present them with a
time-of-day graph with tic marks at each bark and a cd they could listen to of
the barks only.
Explorations so far:
The sound VI's don't have time stamp outputs
I have searched the knowledge base and found a few apps but came to a dead end with my knowledge
I have experimented with various waveform analysis vi's but can't find the combo that gives me what I'm looking for
I can handle the post processing of graphs / spreadsheets but the waveform analysis for capturing the bark is eluding me. If someone could just get me started I could run with it but so far I ain't smart enough.
Thank You...........

Hi rscully,
I think a great starting place is the "Sound Input to File.vi" example found in the Example Finder. Since the output is waveform data, you should be able to extract the timing information from the waveform data. Try using the "Get Waveform Components" function. If that doesn't work for you, you may also want to just grab the time stamp from the system clock with the "Get Date/Time String" function.
To record the bark, you can perform signal processing to match the bark frequency. The first thing that comes to mind, is to record a bark, analyze the power spectrum to find the peak power at a specific frequency range. Then in your program, you can find the power spectrum for that specific frequency range, and if the peak within that range exceeds a threshold, record the bark and time-stamp. This method should be simple if you have the NI Spectral Measurements Toolkit. See this tutorial.
Once you have verified that a bark has occurred, you may want to record the previous bark sound data and the post bark sound data. This will ensure that the entire bark is captured in a sound file. I have edited the "Sound Input to File.vi" example to demonstrate this. Please see the attached picture. I hope this helps!
Mike Lyons
National Instruments
http://www.ni.com/devzone
Attachments:
record_bark.jpg ‏105 KB

Working photographer needs help with hard drives and raid O decisions

Hi new here and also new to Mac well almost new been 20 years since i had a mac. i have a Mac Pro Book and this led to ordering the MacPro since I am a working photographer i made a complete switch in platforms so i have some questions and such but I did place a order on Friday for a 2.66 4gbs of Ram , 2 500 gb hard drive and a 30 in monitor and of course the ATI 1900 XT card so yes i am waiting like many for that card.
I put initial 4gb of ram since running CS2 will at least take a max of 3gb's in the memory cache . i plan on getting 2gbs more from OWC since that seems to be the only 3rd party ram at the moment that is working correctly from reading some of the threads here. Having 6gbs is a no brainer really given the amount of Raw processing that i do along with PS work plus having e-mail and other apps open at the same time. The ram to me is the easy part although expensive . My biggest issue is what to do with the 2 hard drive slots and Raid O or not but I will start a thread on that. But i will have 6gbs total for now and the bottom line is you can never have enough ram still holds true.
Now on to my diliemma with hard drives. I did have a raid O scsi 10k rapture and and 10 k scratch on my Dell box and I am just not sure what to do here. i ordered the 2 500 gb hard drive and I may just put them on the storage side of things than get 2 WD 150gb 10 k Sata drives. Now i could Raid O them for 300 gb and get a performace boast that way or i could keep them seperate and put everything on 1 150 drive and ue the second for scratch only. What i don't know is what Mac perfers and what works better. Not worried so much about failure of drives, thats just life in the big city stuff and you just have backups. What i more worried about is performance versus a waste . seems to me that Raid O may not even be needed with these new Intel boxes with all the horsepower going on. Now the other think I notice is the WD 150gb 10 k drives are 1.5 and not 3.0 so is it really faster than the 7200 3.0 single hard drives. I read barefeats shoot out and it seems just getting the right drives in 7200 and Raid O them maybe the answer.
Okay i am not the biggest geek on the planet but I do know my stuff but this is a area that i look for more knowledge on this. So if i can get some sound advice in this area. i know there are many photographers out there like me pushing hundreds of images that could use the same advice. Now let's leave the money end out , folks sometimes think more with there wallet than what works best not that I am opposed to saving money but after spending over 7 k already on this system it becomes a moot point. LOL
www.guymancusophoto.com

Ok your question is if you should RAID O the two 150GB Raptors or not.
I think it was wise for you to get a couple of them for a boot drive with "Time Machine" coming in the next version of Mac OS X. The second drive would make a excellent bootable backup and eliminating downtime if a boot drive dies on you one morning.
In fact any boot drive cloning software that is Mac Intel ready now would do you good.
Now Barefeats has run some tests, and I can pretty much back up what they say from my own experience.
Mac OS X and apps can be helped only so much by a faster boot drive, and a single 10,000 RPM Raptor is enough, RAID O a pair is overkill.
If you install everything on the boot Raptor and keep your space hogging files (except iTunes) in new folders on another drive, even a 7,200 RPM 500GB, the two drives combined is faster as there is nearly no wait. Both drives can be accessed at the same time. Keeping the boot drive slim keeps the stylus (arm) moving as little as possible to get all the small reads/writes Mac OS X needs.
I RAID O-ed my boot drives because 74GB was the largest they had at the time, so combining them gave me speed and larger storage. I hardly use the speed, it only comes in handy if by rare chance I duplicate a 20GB folder, then I can do it in half the time of a 7,200 RPM drive.
Some of the drawbacks of a RAID O set, especially as a boot drive is that I have to auto-clone the whole set to a external drive regularly (I actually do a couple). Since the data path is separated with a RAID O, any drive failure results in total data loss.
So if you RAID O those 150GB Raptors, your going to have to clone 300GB to a external drive (or another internal) regularly, like once a week. This will take considerable time and you can't use the machine while the cloning process is going on. Sure auto-cloning software like DeJaVu can be used at night/weekends, but why bother cloning more than you have to for no big speed increase?
However if your messing with huge Photoshop files that spill over your CS2 3GB RAM limit (you need to have a "scratch" thats as fast as RAM), duplicating large files and other heavy duty drive work, then a boot RAID O will come in handy. Just remember your initial performance of 185 MB p/s will drop about 20-25% when those drives are 3/4 filled. Still 140 MB p/s is extremely good and a no worry situation.
What is worrysome is anything below 80MB p/s (I'm talking uncached 4K write speeds under X-Bench) with a new boot drive and then as time elaspes that boot drive gets filled up and loses half or more of it's inital speed. 30 MB p/s is really slow. Beachball H&LL.
http://www.barefeats.com/hard33b.html
Do Erase W/Zero in Disk Utility all new drives before laying data on them. Drives get subjected to shock which causes bad sectors on the drive. Driver software uses your data as a guinea pig to test the sectors (which you might not be able to recover the file). Zeroing does this without your data, rewriting the bad sector map so your writes are much improved, OS is more stable. etc.

NEED HELP WITH TIME CAPSULE!

Hello, I am new to this forum and this is my first post. Currently I have a Macbook pro and it is really the only computer in my house I use. My Mom has a Macbook, My dad has a Apple Desktop and my brother a toshiba laptop.
I am running OS X 10.5.8 on my macbook pro, Snow Leopard on the other.
Tonight I got the time capsule, and I am really excited to get this working. To give a little background, I have FiOS and our modem is in the basement which runs directly to a verizon wireless router, MI424WR to be exact. I have a few questions about how to set it up because I tried to set it up like they said but when I plugged the Time Capsule into the Fios router and turned it on all I got on the Capsule was the blinking amber light. I ran an ethernet cord from one of the opened LAN ports on the router to the WAN port on the Capsule. I installed the Airport utility on my macbook and my dads desktop but still do not get any type of connection to the capsule. I am reading about bridging so I tried to do the manual set up in the Airport utility it just scanned and got nothing and I cannot even hit manual setup. My questions are..
How exactly do I set up the Time Capsule, as I described it does it sound like I have everything plugged in correctly?
Is it possible to completely get rid of the verizon router?
How do I get any of my computers to pick up the time capsule?
If you have any questions as to how I explained please just ask. I am really trying to get this set up because I do not want my dad to think he wasted 350 dollars on something that is completely useless for our home setup. Any help would be greatly appreciated. THANK YOU, Zach.

No matter what, even when the TC is plugged into my MBP with an ethernet cable it does not read it.
Disconnect any ethernet cables that you connected to the Time Capsule at the moment
Hold in the reset button on the back until the amber light begins to blink more quickly and continue holding the button another 4-5 seconds when this occurs. Then release the reset button.
Connect an ethernet cable from one of the available LAN <-> ports on the Verizon router to the WAN (circle of dots icon) port on the Time Capsule.
You have two ways to configure the Time Capsule using either wireless or ethernet.
To use wireless, click on the fan shaped Airport icon at the top of the computer screen and look for a wireless network with a name like Apple Network xxxxxx. Log on to that network first, then open AirPort Utility.
To use ethernet, temporarily connect an ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. Open AirPort Utility.
When you open AirPort Utility, click Continue to follow the guided setup. You did not indicate whether you want to Time Capsule to provide a wireless network, but most users want that option. So, you when asked how you want to configure the Time Capsule, you would choose the "Create a new wireless network" option.
As the Jolly Giant says, you will need to choose Bridge Mode when you see a choice of how to connect in the setup process. If you are an experienced computer user, you may want to configure the Time Capsule manually, but I would not recommend that you do this unless you know exactly what you are doing.
My next step is to call verizon and say they need to get out here and fix this ** or I will be going back to comcast.
Verizon has nothing to do with the Time Capsule problems that you have encountered. Blaming them will accomplish nothing.

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

Hi there,
So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
Here's my current system profile:
iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
MacOS 10.6.1 Never updated.
3.06 Ghz Intel Core2 Duo
4Gb RAM
LaCie Big Disk via FireWire 800
Internet access via Ethernet port (cable)
And here's The Issues Log:
– Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
– 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
– After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
– 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
– Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.
As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
4. Replace HD for a brand new one and either step 1 or 3.
5. As a complement, I'm thinking of adding more RAM.
Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
And if it fits best in any other forum, please also let me know.
Cheers and thanks in advantage.

You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help with Time Stamps and saving Strings in Excel

Similar Messages

Maybe you are looking for