New Tab in FPM application not visible

Hi All,
I am new to WD ABAP and working on an enhancement in EHSM 3.0 application using WDA and FPM. I am facing a problem while adding a new tab to an existing application.
My requirement is to add a new tab in the Edit Incident screen (EHHSS_INC_REC_OIF_V3 configuration) and I have followed the below steps:
Created an Z Enhancement for the component EHHSS_INC_REC_OIF_V3.
Created a new config entry (ZEHHSS_CLASSIFICATION_PARAMETERS) for the component FPM_FORM_UIBB component
Created a new Feeder class for the configuration and used it in the config entry
Added a Main View, Subview and UIBB element in the EHHSS_INC_REC_OIF_V3 component similar to other existing tabs.
For the UIBB --> I have selected FPM_FORM_UIBB as component, Window as FORM_WINDOW and the config ID mentioned above.
I am able to see the new tab in the design time. There are also no errors when I perform a check.
But once I login to the portal and go to the Edit Incident screen, the new tab is not shown. Please let me know if there are any additional steps needed to be performed?
Also could someone let me know how do we link a Feeder class with a BOPF node and use it in the WDA FPM screen?
I have given screenshots showing the behaviour at design time and runtime.
Poojith MV

Hi Chetan,
I am now able to add a new tab after adding a new entry with the Main View name in "Assign Access levels to Incident Tabs" in transaction SPRO.
However, I am now facing a new issue when I add a main view in OIF component. There are 12 main views in the Object Instance Schema with ID's MainView<sequencenumber> as shown below.
But when I add a new main view I am getting the ID with the format MainVIew<sequencenumber_hexadecimalvalues> and also I am able to edit the ID value which is not enabled for other main views as shown below.
The problem with this hexadecimal value is that every time a change is done and I save the configuration, the number changes and this is causing problem as the configuration in SPRO does not match and the new tab becomes invisible.
Please could you let me know what could be the reason and how to rectify this?
Regards,
Poojith M V

Similar Messages

Why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?

why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

I can not right click in my bookmarks "open in new tab"? Other areas yes, but not in my bookmarks. I have to open a tab first , then left click, to open. Is something wrong, the option to open in new tab is there, but not highlighted?

the option to open in new tab is there, but not highlighted?

now it is working?! Go figure. Yeah! Thanks anyway......

I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

Iv'e tried that but that won't work either. Help please.

HT204266 my you tube application not visible

you tube application not visible in my device

What version of the software do you have? iOS 5? iOS 6?
Check by opening Settings app. The navigate to General > About. It will tell you the software verison.
In iOS 5, restrictions could cause YouTube from not appearing any where in the home screen.
See: iOS: Understanding Restrictions
In iOS 6, it's normal because YouTube is no longer part of iOS. You'll need to go to the App Store and download it.
See: YouTube for iOS

TS1702 my you tube application not visible

you tube application not visible in my device

If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > YouTube being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPhone has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

NIDaq Windows application not visible in new project

Hi Everyone,
I am trying to build a VB.NET WPF application using Measurement Studio 2013 for Visual Studio 2012.
I followed the walktrough Creating a measurement studio NIDAQmx application, but I get stuck at the point of creating the project as Visual studio does not offer me the possibility to create an NIDaq Windows application.
I have DAQmx9.8 installed for LabVIEW, I downloaded NI device Drivers 2014 feb, but still the same.
When I installed Measurement Studio, it could not find the Device Drivers, and even after downloading them and trying to install them afterwards trought the installer of measurement studio, it cannot find them.
Daqmx support for .NET 4.5 seems to be installed too, although it is not visible in the list of installed softare.
Thanks for your help,
Best Regards,
Attachments:
WPF_Daqmx.PNG ‏51 KB
installedSoftware.PNG ‏21 KB

Hi Matt,
Thanks for your answer, I did a custom install and I installed .NET framework support 4 & 4.5, but I did not install Microsoft Visual Basic 6.0 support, is this mandatory?
Although it is working now on some of my configurations at least.
I have 3 machines on which I have made the attempt, with the following configurations:
A: x86 desktop:
-Windows 7
-LabVIEW installed, NI-Device drivers Feb 2014 and NI-DAQmx 9.8.0 (previously installed, for labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available in both visual studio 2010 & 2012
B: x86 desktop:
-Windows 7
-NI-Device drivers Feb 2014
-Visual Studio 2010
-Measurement Studio 2013 for Visual Studio 2010
=> NI DAQ project and NI DAQ assistant available in visual studio 2010
C: x64 laptop:
-Windows 7
-LabVIEW installed and NI-DAQmx 9.8.0 ( NI Devices Drivers feb 2014, but Ni-Daqmx 9.8.0 was installed before as I am usually working with labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available only within visual studio 2010 not 2012....
I would like the laptop to work under 2012 too, as it is the machine I use most of the time.
Does the order of installation impact on visual studio integration?
Should I reinstall everything on the laptop from the begining? In which order?
It seems that NI-DAQmx 9.8.0 even with .NET support 4&4.5 is not enough, and it is mandatory to install NI Device Drivers Feb 2014, Is that correct? If yes, why?
Now the most important for me is the ability to check if the signal outputs are generated correctly on the simulated device, thus being able to see traces with NI IO trace, and none of these configurations, using both NI DAQ example or a project generated with the daq assistant, shows anything in NI IO trace.
I have posted related threads on ni.forums.
http://forums.ni.com/t5/Measurement-Studio-for-NET/Web-publishing-daq-application/m-p/2830642
http://forums.ni.com/t5/Measurement-Studio-for-NET/WriteDigitalChannel-example-nothing-in-NI-IO-trac...
Thanks for your help,
Best Regards,

When using tabbed browsing, if I click to open a new tab, why will it not automatically load my homepage in the new tab instead of a blank window?

I use tabbed browsing with the tab bar visible at all times so I can click on a new tab when convenient.Why can my homepage not load automatically on that newly opened tab insted of a blank screen with a search bar saying "you've opened a new tab".........well yeah. I have looked through the options and cannot find anything to open a new tab with the homepage. Is it possible? Have I missed it? If it's not possible, could you make it so?
== This happened ==
Every time Firefox opened
== I opened a new tab.....see above

The default is to load a blank page.
Try one of these add-ons:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777

Tried 2 hrs now, can't fix it: I want new tabs to open google, not blank page; dwnldng an add-on didn't work, & now config has many CT2504091 files, what next?

Currently, opening a new tab goes to a blank search page with an annoying advertisement, and I want it to open a new tab in google.com.
I've tried for over 2 hrs to fix this, following instructions I found. Nothing has worked.
I downloaded an add-on, but it did not work.
I then used about:config and tried changing "newtab" and "keyword" but those changes did not work.
I now see that the config list has dozens and dozens of files beginning CT 2504091, and I am wondering if those should be there.
I now fear i am making things worse if I keep trying, so I am writing to you.
Alos, I am reluctant to use the "reset" option because it says "will TRY to keep bookmarks," and my wife will NOT be happy if all her banking and other bookmarks disappear upon reset.
thanks in advance for your help.

You likely have a user.js file in the profile folder, this may sound like jargon now but the steps below shall fix this.
REMOVAL OF ADVERT
# Go to the Firefox Button and hover help, click "Troubleshooting information"
# A new page should now show similar to below.
# Under the Application Basics section, click on Show Folder. A window with your profile files will open.
# Go to the file named user or user.js, right click and delete.
# Now restart Firefox, and the advert should be removed.
If it isnt please use the searchreset tool linked below.
* https://addons.mozilla.org/en-US/firefox/addon/searchreset/
* Just install it and it does extra work if above didnt work.
CHANGING TO GOOGLE.COM
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Type '''browser.newtab.url''' and double click the result of that name, a new window should now show, enter www.google.com into that window then hit OK.
# Does opening a new tab go to google.com now?

Application not visible in PDA after server deployment

Hi All,
I developed an Mi 7.1 application.Deployed all the sdas in the Mi server using sdoe_upload_archive.I created a device.Assigned all the mobile components to the device .I synchronized the device and it is successful.
I can see the service and mobile ui component in the mobileapps folder of the device.
But I am not able to see the application in the application launcher of the PDA.
Any clues in resolving this?
Thanks and regards,
Rajesh.A

Hi Rajesh,
The application link may not be visible for the below given reason. Check whether it solves your issue :
Reason 1. If the role SAP_DOE_ALL_APP_VISIBLE is missing for the user on the DOE system, then the application link is not visible on the home page.
Solution 1. Add the role via agents in the NWM portal.You should also perform a delta download for the following data objects in the SAP BASIS 7.10 software component version (SWCV):
1. USERDETAILS
2. USER_AUTHORIZATION
Reason 2. The application link is not visible because of the user authorization issue. Check whether the SAP BASIS 7.10 software component version is assigned to the device or not.
If the SAP BASIS 7.10 software component version is not assigned to the device, then follow either of the steps specified below (2a or 2b):
Solution 2a. Disable the authorization check on the mobile client
(For PDAs)
This can be done by creating a configuration.properties file in the \MI\Settings\ folder with the entry com.sap.tc.mobile.cfs.deploy.check_authorizations=false. Stop and start the client. The file is consumed, the authorization check is disabled, and then the application is visible in the application launcher.
Solution 2b. Assign the authorization-related SWCV to the device (in the NWM portal)
In the NWM portal, go to the DMSWCV tab in Device Management. Manually assign the SWCV containing the authorization data objects (SAP BASIS 7.10). Trigger an extract. Synchronize the device. The authorization objects are now available on the device. The application appears in the application launcher.
Reason 3. If the installed client version and the NWMCLIENT.SCA version uploaded in the DOE are different, even then the application link is not visible on the home page.
Solution 3. Upload the NWMCLIENT.SCA (same version of the client) to the DOE using transaction SDOE_UPLOAD_ARCHIVE.
Regards,
Suma

FPM application - Not validating the Input at Review time

Hello Guru,
I am creating new FPM application from existing, as we have some issues in existing application. In existing application when I click on Review button it will fire below FPM event and validate the data and gives error message if any validation error.
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE,
new VAC("Old DC Name", "Old Component Name" ));
In my new application when I click on Review button it does not validate the data and even not display validation error messages. I have changed according to my new DC as below.
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE,
new VAC("New DC Name", "New Component Name" ));
My question is how FPM konws which fields it has to validate?
Do I have to mention this information somewhere, if yes then how Can I put information for my new DC?
Hope this helps to understand my requirements.
Your help will be appreciated.
Thanks,
Ameet

Hi,
Please double check if MCU on FE server works well, when two participants are connected, the session is essentially peer-to-peer. When three or more participants are connected, the Application Sharing feature depends on the Front End Server Multi Point Control
Unit (MCU) to provide the sharing stream to all parties.
Please check if port 5065/TCP is available on Front End server.
Please also troubleshooting with the help of Recommended Steps part in the link below:
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

When I click on the "new tab" button it does not open a new tab, how do I fix this?

Left clicking or right clicking on the new tab button does not open a new tab. Common fixes have been unsuccessful. I don't know what's wrong. It's a recent problem, and even though I'm using an older version of Firefox this hasn't been a problem before.

Try uninstalling the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and the current version of Firefox.

New Tabs for Firefox will not open unless clicking on a link while browsing.

To expand on what the question is, Every time I try to open a new tab, it just doesn't work. New tabs only open when I click a link that also opens the page in that link in a new tab. Even when I try to do the same thing through the file menu and Ctrl+T. Otherwise, Firefox is running normally. Yesterday, I downloaded a program called "FLV player" that I knew came with an ask.com toolbar but for some reason, switched ask.com to the homepage for Firefox. After that, I switched the homepage for Firefox back to its default page.

'''''Ask Toolbar''''' can cause that problem. Uninstall it.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You have some old Java Console '''''extensions''''' that Java did not clean up when updating. The old versions that you have are: 6.0.22, 6.0.23, 6.0.24<br />
You can remove them by following these instructions: http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

When I open a new tab, my pins do not show up, and I cannot find the square with the 9 boxes to turn it on at the top, what do I do

When I open a new tab, the page is blank, and I cannot view my pins. I tried searching for the box with the 9 squares in it at the top of the screen to turn it back on, but it does not show up. How do I get my pins back?

Hello,
First go to '''Tools''' >> '''Options''' >> '''Privacy''' >> '''Firefox will''' change to '''Remember history''', then go to '''about:config''' and search for '''browser.newtab.url''' change its value to '''about:newtab'''.
*[http://kb.mozillazine.org/About:config about:config]
Also:
*[https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]

New Tab in FPM application not visible

Similar Messages

Maybe you are looking for