NIDaq Windows application not visible in new project

Hi Everyone,
I am trying to build a VB.NET WPF application using Measurement Studio 2013 for Visual Studio 2012.
I followed the walktrough Creating a measurement studio NIDAQmx application, but I get stuck at the point of creating the project as Visual studio does not offer me the possibility to create an NIDaq Windows application.
I have DAQmx9.8 installed for LabVIEW, I downloaded NI device Drivers 2014 feb, but still the same.
When I installed Measurement Studio, it could not find the Device Drivers, and even after downloading them and trying to install them afterwards trought the installer of measurement studio, it cannot find them.
Daqmx support for .NET 4.5 seems to be installed too, although it is not visible in the list of installed softare.
Thanks for your help,
Best Regards,
Attachments:
WPF_Daqmx.PNG ‏51 KB
installedSoftware.PNG ‏21 KB

Hi Matt,
Thanks for your answer, I did a custom install and I installed .NET framework support 4 & 4.5, but I did not install Microsoft Visual Basic 6.0 support, is this mandatory?
Although it is working now on some of my configurations at least.
I have 3 machines on which I have made the attempt, with the following configurations:
A: x86 desktop:
-Windows 7
-LabVIEW installed, NI-Device drivers Feb 2014 and NI-DAQmx 9.8.0 (previously installed, for labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available in both visual studio 2010 & 2012
B: x86 desktop:
-Windows 7
-NI-Device drivers Feb 2014
-Visual Studio 2010
-Measurement Studio 2013 for Visual Studio 2010
=> NI DAQ project and NI DAQ assistant available in visual studio 2010
C: x64 laptop:
-Windows 7
-LabVIEW installed and NI-DAQmx 9.8.0 ( NI Devices Drivers feb 2014, but Ni-Daqmx 9.8.0 was installed before as I am usually working with labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available only within visual studio 2010 not 2012....
I would like the laptop to work under 2012 too, as it is the machine I use most of the time.
Does the order of installation impact on visual studio integration?
Should I reinstall everything on the laptop from the begining? In which order?
It seems that NI-DAQmx 9.8.0 even with .NET support 4&4.5 is not enough, and it is mandatory to install NI Device Drivers Feb 2014, Is that correct? If yes, why?
Now the most important for me is the ability to check if the signal outputs are generated correctly on the simulated device, thus being able to see traces with NI IO trace, and none of these configurations, using both NI DAQ example or a project generated with the daq assistant, shows anything in NI IO trace.
I have posted related threads on ni.forums.
http://forums.ni.com/t5/Measurement-Studio-for-NET/Web-publishing-daq-application/m-p/2830642
http://forums.ni.com/t5/Measurement-Studio-for-NET/WriteDigitalChannel-example-nothing-in-NI-IO-trac...
Thanks for your help,
Best Regards,

Similar Messages

New folder is not visible inside my project but shows in Windows Explorer.

I created a new folder under another folder. The new folder is not visible inside my project but shows in Windows Explorer. Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists. My co-worker can access the same file (on a share drive) and see the new folder just fine. This error occurs whether I was the one creating the new folder or she is the one creating the new folder. I am new to RoboHelp and she has used it for years. I suspect something is not yet set up right on my side. Ideas? (I thought I posted this yesterday but I can't find it anywhere)

Hi there
What version of RoboHelp are you using?
Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
Cheers... Rick

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

HT204266 my you tube application not visible

you tube application not visible in my device

What version of the software do you have? iOS 5? iOS 6?
Check by opening Settings app. The navigate to General > About. It will tell you the software verison.
In iOS 5, restrictions could cause YouTube from not appearing any where in the home screen.
See: iOS: Understanding Restrictions
In iOS 6, it's normal because YouTube is no longer part of iOS. You'll need to go to the App Store and download it.
See: YouTube for iOS

TS1702 my you tube application not visible

you tube application not visible in my device

If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > YouTube being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPhone has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

After applied June 2014 Windows Updates from Microsoft (Not using WSUS server to obtain WU), our Windows Server 2012 R2 and Windows Server 2008 now getting this error message when we perform the "Check for Updates":
Windows could not search for new updates. Error code 80244004.
Richard

Hi Richard,
Just addition, please refer to following KB to reset Windows Update components and monitor the result.
How do I reset Windows Update components?
If didn’t use ESET security software, please also refer to following thread and check if can help you.
Latest
version of Windows Update causing error 80244004
Hope this helps.
Best regards,
Justin Gu

Project Monitor Window and Timeline Tracks do not appear in new Project ?

The Program Sequence Monitor and the Timeline Sequence 01 does not appear on opening of new project, eventhough checked in Windows Space.
All existing projects are showing the correct layout and can be used , but, i cannot activate a new project except import clips into project window..
Any assistance would be appreciated.
Operating system is i7 64 bit and Program is CS5.5.2 Premiere Pro.
ie., The space is there but nil info ie, lines , tracks etc for timeline to insert clips or to show in Monitor ?
Message was edited by: Bob Dix Photographer

I,ve been doing it for years , but, the timeline will not accept the clips AVCHD and the Project setting is correct ? I somehow got rid of the Sequence ICON top left in red ??????????????
Message was edited by: Bob Dix Photographer
Message was edited by: Bob Dix Photographer

Premiere Elements 12 will not start a new project

I loaded Premiere Elements 12 on my...
64bit HP Laptop Dv7
Intel core i7
Windows 7
Radeon Graphics (HD 6770m)
updated Quicktime
updated display drivers as requested when first installed.
reloaded PE 12
Started PE12 but when i click Video Editor and then select New Project the button shows the purple and black lines for about a minute and then stops and nothing happens
I have almost given up. I have been trying to load this program on my pc for 5 days. Nothing but problems. I have asked pc gurus at work and no one has a clue what could be wrong.
Why will Adobe Premiere Elements 12 not start on my laptop?
by the way there is no BadDrivers.txt file to delete that i can find...
Does anyone have a clue as to why the application would not start?

Rotary
It is late where I am so I will give you some things to work on.
Premiere Elements does not fare well with 2 video cards/graphics cards. Have you disabled the Intel and observed the consequences?
Determine if the problem is there with and without the antivirus disabled.
BadDrivers.txt file
Local Disk C
Program Data
Adobe
Premiere Elements
in the Premiere Elements Folder will be one file and some folders. You do not want the folders or what is in them. You want that file which is the BadDrivers.txt file. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path shown. Be aware that after you open the program again after the file deletion, the program will generate a new BadDrivers.txt file but by that time the problem should be gone (hopefully).
I would probably be going after the Adobe Premiere Elements Prefs file -
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Better yet....check out the information in the following blog posts
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
We will be watching for your progress in the light of day.
Thank you.
ATR

Web Object not visible in published project

I'd like to use the new web object interaction widget in Captivate 7 to embed a website into a project. Everything works fine as long as I only preview the project in my web browser. But when I publish it and go to the slide where the web object is supposed to be, there's only a blank space. Why?
I've published the project in SWF-Format with eLearning-output set to "AdobeConnect". I tried to switch the option "Scalable HTML content" on and off as I heared that some people are having problems using this in connection with widgets, but no matter whether it's turned on or of, the web object doesn't show up. There must be something very
trivial that I have overlooked since I'm using the web object in the standard way it is meant to be used.
Thanks in advance for any help.
Andreas

Thanks for your advice, but it still doesn't work. I have created a new project for my tests with only the web object in it to make sure no other objects etc. are influencing the output. I published the project and tried to run it on different browsers/operating systems and directly from my hard drive vs. Adobe Connect. The results:
Using my Mac and opening the project with the HTM.-file from my hard drive after I have added the published files folder to the trusted locations for Flash (without this setting, it doesn't work), the web object only appears in Safari, but not in Chrome and Firefox. Using AdobeConnect, it's the same: only Safari.
Using a Windows laptop (again opening the project with the HTM.-file from my hard drive after I have added the published files folder to the trusted locations for Flash), it works with Internet Explorer and Firefox, but not with Chrome. Using AdobeConnect, no browser works. I only get this message:
I can't use the web object when it only loads under very special circumstances. Moreover, I found out, that checking the "Scale HTML content" checkbox in the publish window results in a totally misplaced web widget in those browsers that support the web object. It then looks like this:
I use this option regularly, so this is really a problem for me.
I hope you can tell, what I can do to get the web object running. I simply can't believe that this is the standard behaviour and that everybody else is experiencing the same problems. There must be something I can do to get it running.
I hope you can help.
Best Regards
Andreas

Folder created in Windows Explorer not visible in Command Line as SYSTEM user

Hello everyone,
We have an odd behavior with an application installation, which I cannot make much sense of.
We are trying to deploy an application on Windows 8.1 Enterprise x64 which tries to access
C:\windows\system32\config\systemprofile\Desktop during installation.
This folder does not exist by default in a Windows 8.1 installation. Hence we am creating this folder using a VBS script manually. The VBS script also launches the application EXE. The setup itself runs under the SYSTEM account (in order to be deployed using
SCCM).
When the install script is launched, we can see in the Windows Explorer that the "Desktop" folder is created in the systemprofile directory. However, to the setup running under the system account, this folder is not visible.
I have verified this by running a command line prompt under the SYSTEM user and navigating to
C:\windows\system32\config\systemprofile\. Using the "dir" command does not show you a "Desktop" folder under the EXACT same path.
When we create the Desktop folder from this command prompt, the application installs just fine.
What are we missing? Any inputs are highly appreciated.

Hi,
Might this need to quit the command prompt after the folder creation, then reload it to continue the installation of the software?
Best regards
Michael Shao
TechNet Community Support

IMovie crashed and will not create a new project

I was in the middle of working on a project and when I went to add a clip, it said something along the lines that I couldn't put it there and then closed the program. When I was able to open it back up, I tried working on it but it couldn't find the clips, and later on the actual projects. Now, I am unable to even create a new project.

It is actually on a MacBook not on Windows 7

Open window is not visible!!

Hello Experts,
We are using BPC 7.5 M sp04, SQL Server 2008, Office 2007.
On one of our client laptops having Windows7 and Office 2007 is having the problem (emerged few days ago) that certain dialog (pop-up) windows appear only in the Windows' taskbar but the window itself is not visible. The main Excel session window switches to waiting (non-responsive) mode until the open window is closed using right-click menu at the taskbar.
This applies to the following commands: eTools->Open Dynamic Template, eTools->Save [Dynamic Template] As, eSubmit->Open Schedule Library, eAnalyze -> Open Report Library.
What could be causing this issue. Please Advice.
Thanks & Regards,
Rohit

Hi Rohit,
I don't think it's a BPC issue maybe for some reason the pop-up are out of screen, if so right-click on the taskbar icon, click on move you will see the pointer that change with the for arrows then use one of the arrows key on the keyboard and you should see automatically the pop-up.
Regards
Roberto

Application not visible in PDA after server deployment

Hi All,
I developed an Mi 7.1 application.Deployed all the sdas in the Mi server using sdoe_upload_archive.I created a device.Assigned all the mobile components to the device .I synchronized the device and it is successful.
I can see the service and mobile ui component in the mobileapps folder of the device.
But I am not able to see the application in the application launcher of the PDA.
Any clues in resolving this?
Thanks and regards,
Rajesh.A

Hi Rajesh,
The application link may not be visible for the below given reason. Check whether it solves your issue :
Reason 1. If the role SAP_DOE_ALL_APP_VISIBLE is missing for the user on the DOE system, then the application link is not visible on the home page.
Solution 1. Add the role via agents in the NWM portal.You should also perform a delta download for the following data objects in the SAP BASIS 7.10 software component version (SWCV):
1. USERDETAILS
2. USER_AUTHORIZATION
Reason 2. The application link is not visible because of the user authorization issue. Check whether the SAP BASIS 7.10 software component version is assigned to the device or not.
If the SAP BASIS 7.10 software component version is not assigned to the device, then follow either of the steps specified below (2a or 2b):
Solution 2a. Disable the authorization check on the mobile client
(For PDAs)
This can be done by creating a configuration.properties file in the \MI\Settings\ folder with the entry com.sap.tc.mobile.cfs.deploy.check_authorizations=false. Stop and start the client. The file is consumed, the authorization check is disabled, and then the application is visible in the application launcher.
Solution 2b. Assign the authorization-related SWCV to the device (in the NWM portal)
In the NWM portal, go to the DMSWCV tab in Device Management. Manually assign the SWCV containing the authorization data objects (SAP BASIS 7.10). Trigger an extract. Synchronize the device. The authorization objects are now available on the device. The application appears in the application launcher.
Reason 3. If the installed client version and the NWMCLIENT.SCA version uploaded in the DOE are different, even then the application link is not visible on the home page.
Solution 3. Upload the NWMCLIENT.SCA (same version of the client) to the DOE using transaction SDOE_UPLOAD_ARCHIVE.
Regards,
Suma

Application not visible in 9.3.1

hi All,
I have successfully created a database(ms-sql) and configured it.on top of it i have created an application successfully.but when i try to login that app thru planning web or workspace its not visible there.can anyone tell me what is the cause for this.
thanks in advance

If you are going direct to planning and not seeing the app in the dropdown then it may be down to having created multiple instances in the config utility, if that is the case you will need to associate the datasource with the active instance - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch02s10s04.html
Cheers
John
http://john-goodwin.blogspot.com/

Characters in Standard Template in Project not replaced in new project

Hi. I have created a coding mask : XOG..XXX.XXX.XX/XX-XX.000. With this coding mask I have created a standard wbs template , XOG.XXX.XXX.00/01. Now when I create a new project copying this template with project definition XOG.GRE.ADD.11/06, only the project definition has its characters replaced with the name of the project. The WBS' created still carry the characters in the standard template ie XOG.GRE.XXX.00/01. Is it possible to have the characters of the WBS replaced when creating a new project along side the project definition?

Hi,
Your Standard Project Definition is XOG.GRE.ADD.00/01 and bellow which you have created WBS element.
i.e.   XOG.GRE.ADD.00/01
        XOG.GRE.ADD.00/01-AB
        XOG.GRE.ADD.00/01-AB.1
Now while copying from std template you have given your new proj definition XOG.GRE.ADD.16/06 and bellow WBS element are getting created so there is no need to change any character before 16/06 because your project definition and 1 level WBS element should be the same.
Still if you want to change ADD with different characters i.e ABC follow the following procedure while creating the project.
1.     In CJ20N click on Copy project and enter your required project definition XOG.GRE.ADD.16/06
2.     Select required project profile
3.     Enter standard project definition XOG.GRE.ADD.00/01
4.     Click on WBS Element overview (F8) instead of OK
5.     Accept the warning messages
6.     Then Click on Replace and give your required characters to replace with i.e ADD to ABC
But this will have your project definition as XOG.GRE.ADD.16/06 and your WBS elements starting with XOG.GRE.ABC.16/06
i.e.   XOG.GRE.ABC.16/06
        XOG.GRE.ABC.16/06--AB
        XOG.GRE.ABC.16/06-AB.1
So there will be mismatch in project definition and WBS element codes. If your business is accepting it then you can create the same, but logically it is not correct.
regards,

NIDaq Windows application not visible in new project

Similar Messages

Maybe you are looking for