No data coming in to enhanced fields of extractor

I added fields twice to  the existing enhanced business content extractor 0fi_gl_4, I wrote the transactional data exit and did the extraction, the extraction went with green light. when i checked the data in ods, i dont see any data for the enhanced fields, including the earlier enhanced fields which used to be populated before i did this enhancement.
when i look at load in monitor
it is all green, but when i go to scheduler to do another test load it is giving me the following message
Conv. exit PERI7 for field FISCPER not found in BW; Exit deleted
Message no. RSM1149,
> is this the reason for no data in my enhanced fields....if so how do i get rid of it?
> do i need to delete and recreate the datasoure
so that all the enhaced fields lie in same append structure, if so how do i recreate the datasource...?
> plz also help me debug my enhancement, i tried rsa3 it doesnt show an error, i tried break point but no use..
plz give me detailed instructions..
thanks in advance
points will be assigned for inputs

do i need not add exit even if i did an append structure to the datasource? (bcoz in help it says only about include structure )
do you know how to do an include structure to the datasource instead of append?
i tried making an infinite loop in exit and do a data load..the load has taken sucessfully without an error and i checked the data , the enhanced fields are empty..so i concluded that it is not even calling the exit? any idea of how to fix it ? plz give me ur mail id ..i will send some screen shots?
regarding the conversion exit error, this is all i am getting, when i click on the error there is nothing but the same decription
Conv. exit PERI7 for field FISCPER not found in BW; Exit deleted     RSM1     149     \
> any way to look up by error message and number?

Similar Messages

  • Data not populated for Enhanced field

    Hello,
    I had done enhancement by adding field to the LO Datasource.
    Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
    When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
    What is the reason that i am not able to see the data for the enhanced field in RSA7?
    Thanks in Advance!
    Regards
    M.A

    Hi M.A,
    This means that there is no delta data for that field.
    If there is no change in the data for that field then you cannot see any data in RSA7.
    Check in the Delta repetition in the RSA7 for any data for that field.
    Regards,
    ravi Kanth

  • 0VENDOR_ATTR: No data coming through for the field VBUND(trading Partner ID

    Hi Friends,
    I am working on Fi-AP line items for trading partners in BW. Trading Partner ID is a attribute of 0Vendor_attr datasource but it is not pulling the data for it. The field name is VBUND. In BW this field is mapped to 0COMAPNY. I want to use 0PCOMPANY in BW for trading Partner whi is referenced with 0COMPANY.
    Please advice why 0Vendor_attr is not pulling the data for VBUND.
    Thanks,
    SB

    Hi Rajesh,
    thank you for your answer. I am not familiar with field exits and had not thought about it.
    I found this link on the forum : http://www.sapdevelopment.co.uk/enhance/fexits.htm that gave me additionnal info on field exits.
    I will have a look on monday to see if it solves my issue, but it seems to be a very suitable solution.
    I'll reward your answer as soon as I know wether it solved my problem or was only helpful :).
    Thanks a lot.
    Regards,
    Damien.

  • Data loading for newly enhanced fields

    hi  friends
    we have a cube that updated with data daily for last one year.now we needed to add two fields to that data source .if we do so how can we  update data for those newly added fields in our data target for the previoue one year.
    Thanks  in  advance
      venkat.p

    HI,
    GOTO INfOPACKAGE screen ,select the two fields you want in the dataselection Tab you can give the values for those fields in the From Value and To Value, now goto update tab and choose initialize delta process  and schedule the dataload
    Hope this helps....

  • Data not updating to enhanced field in bw from psa to target

    Dear Experts,
    I am loading data from datsource to target by using transformations and getting the data for all fields to PSA and i am running DTP the for one field the data is not updating,transformations and dtp also active but in DTP when i gone for with debugging mode in simulation that particular fields transformations are not appearing same thing happened in from one DSO to another DSO loading,anybody can help me for coming out of this problem thanks in advance and ur help will be appercited.
    Thanks & Regards,
    k.sathish

    HI,
      It might be the patch level, anyways what you can do is open that particular transformations, then on the top menu bars click on extras => display generated program. once you click on this the program behind the transformations will be displayed, check in the methods if that fields is assigned , if you locate that rule, put a break point and do that DTP debugg simulation you can see that in debug.
    2. Quick solution will be to delete that field transformations, activate it and again create transformation for that activate activate it.
    hope it helps
    thanks
    syed

  • Unable to view enhanced field in Data Source

    Hi All,
    We recently upgraded our R/3 system from 4.7 to ECC 6.0. Now when we are enhancing the data source, the field is visible in the Extract Structure. But we are unable to view it in the data source. We checked out in RSA2 the enhanced field attribute is specified as 'Field in OLTP and BW Hidden by SAP'. We have written code to modifiy the ROOSFIELD table to make the enahnced field visible. But this is the problem with all the data sources. Whenever, we have to enahnce, we have to go thru this process to make the enhanced field visible.
    Is it like that we missied out any patch in ECC 6.0 while upgrade? If any person faced similar situation, please help us.

    Hi Ravi,
    I think you are missing a step here. As soon as you enhance your datasource with new fields, by default, those 2 check boxes are checked ( Hidden and Field in User exit only). You go to RSA6, edit your datasource and here, you can uncheck these added fields so that you can use them. You do not need to write any code to change the fields settings in ROOSFIELD table. Do the step I mentioned above after enhancing and you should be good. Hope it helps.
    Thanks and Regards
    Subray Hegde

  • Regarding updating data in the enhanced fields

    Hi All,
    I have enhanced one standard FI data source with a field. Now I have one doubt. We can do a full load and for subsequent loads, what should I do so that delta values are filled for the new appeneded field.
    Regards
    Jay Y

    Hello JayanTh Y,
    How r u ?
    You have enhanced one FI Data Source with 1 field. Then
    1. Replicate that Data Source and do the changes also in the InfoSource and the Data Targets
    2. Schedule a Full Upload and load the data. Now, your new enhanced field's data will be updated in BW
    3. Schedule again "Initialize without Data Transfer" and from now the delta update will be available and the values for the new enhanced field will be captured along with the delta.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Reg: Loading historic data for the enhanced field

    Hello All,
    We need to add a new field 0VENDOR to our datasource 0FI_GL_4. This field is available in our BSEG table. Hence, we are planning to go ahead with datasource enhancement.
    Now, please advice on how to update the historical data to this newly added field.I have heard there is a BW functionality/program to do so without deleting the entire data. Kindly advice on the possible solutions.
    Thanks & Regards
    Sneha Santhanakrishnan

    HI Sneha,
    Using remodeling option you will be able to do that, ie.. loading historical data for new attributes without deleting existing data. But the problem is in remodeling either you can assign constant or some other attribute value or values determined using EXIT.
    Now when you are loading data from source system and if you need historical data as well the best practise is delete existing data and reload it from source sytsem.
    But if you don't want to do that then I can give you one trick but not sure whether it will work or not. The idea is to populate the historical values for 0Vendor using customer exit option of remodeling. Now to get the historical values in customer exit you will need all that data in some BW table, here you can think of creating some generic extractor which will store the values of all the documents and the respective vendor, as you will load data form source system you will get historical values as well.
    Now read that table in customer exit and populate vendor value. This will be one time process to populate the historical values.
    Regards,
    Durgesh.

  • IS-RETAIL: How to update custom enhancement field using BAPI?

    Hi gurus,
    Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
    This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
    But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
    Thanks in advance!

    Hi DongHai,
    I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
    Rewards if useful
    Regards,
    Mark

  • Set up table contains the enhanced field information?

    Hi Experts,
    I am enhancing a field in the datasource 2lis_11_vaitm,
    Things i did :
    1.Enhanced the ext.structure with the required field.
    2.Activated the ext.structure.
    3.Witten the logic in the CMOD.
    4. Deleted the Setup table and refilled.
    Now my question is :
    1.Did the setup table contains the ENHANCED FIELD with the historical data ?if so where to see that?
    I checked in RSA3 the enhanced field is displayed with the records.
    The code i have wriiten is WHEN "DATASOURCE " then -> logic from the base table.
    Now will the data come from the base table or from the setup table?
    Can any one help me in this issue.
    Best Regards
    Jelina

    Why do we need to delete the setup table after doing enchancement with standard Datasource.
    Ans :
    You neednot refill the setup table just because you enhanced the datasource.
    You need to delete and refill if the postings happened after you filled the setup table.
    Meaning you will miss the current posting.Unless you have done a init in BI/BW side.
    Hope this helps.

  • How to pass enhanced fields in BAPI_PO_CREATE

    Dear Memebers,
    I have a requirement to pass the Enhanced fileds in Module Function BAPI_PI_CREATE using VB.NET can anyone send me sample.
    Thanks,
    Nasir

    Dear Nasir,
    In order to pass enhanced fields to the BAPI_PO_CREATE function module, populate a table of type BAPIPAREX and pass it to the EXTENSIONIN tables parameter of the FM.
    (Sample Code): Suppose you enhanced Purchasing Document Item Table EKPO with Append structure ZEKPO with the fields ZNAME1 and ZDATA1.
    DATA: GT_EXTENSION TYPE TABLE OF BAPIPAREX,
               WA_EXTENSION TYPE BAPIPAREX.
    CLEAR WA_EXTENSION.
    WA_EXTENSION-STRUCTURE = 'ZEKPO'. " 'Name of the Append Structure for Standard PO header/item table'
    CONCATENATE WA_EKPO-ZNAME1 WA_EKPO-ZDATA1 INTO WA_EXTENSION-VALUEPART1. (Ensure that the total character length of these fields is less than 240)
    APPEND WA_EXTENSION TO GT_EXTENSION.
    Similarly, you need to pass the ZEKPOX structure with the relevant check boxes. For this, you need to refer to the documentation for Function Module but generally, Passing Enhanced Fields work this way.
    Regards,
    Amit Sharma

  • Records missed from DELTA for which changes made only in enhanced fields

    Dear Friends,
    I have enhanced a feild in standard extractor 0UCINSTALLAH_ATTR_2 by adding a z-field in append structure and writing corresponding code in customer exit. In RSA3 also I'm able to see the data getting reflected for enhanced z-fields but when I'm pulling delta those records are not getting extracted for which changes have been made only in Z-FIELDS in R/3 side.
    i.e. if I do not make any changes in std fields of the std. extractor and only change z-fields this record is missed from delta data pulled. Please help urgently.
    Regards,
    Amit Srivastava

    Hi ,
    Some times it happens that the system is not able to capture the delta based on the changes made to the Z - fields :
    You can think of the following options :
    1. You can write a code in the user exit for this thing so that the changes are captured(Not sure how it is done, however had read that it is possible. You may have to explore the same)
    2. Try to change any of the standard fields used for delta along with the custom fields so that the changes get captured.
    3. Extract a full load instead of a delta load. This may depend on various parameters
    I hope you have already checked the extraction.
    Hope the above points help.
    Regards,
    Adarsh Mhatre

  • Enhancement fields

    Hello Guys!
    I need help with Note 762984:
    "All enhancement fields which you defined within the SRM Server can only be sent to other systems (SAP EBP, MM) if these are also contained within the XML definition. For this purpose you must enhance the XML definitions of the individual documents in the XI Integration Builder and afterwards regenerate the proxy classes into the SUS system (and into the EBP system). You can find an exact description of these two processes under http://service.sap.com/xi -> Media Library -> Guides"
    I'd like to create enhancement fields for purchase orders and purchase order
    conformition, but I'm not able to find any Guide!
    Could anybody send me ([email protected]) a documentation about that and enhancement fields in XI in general?
    Thanks a lot,
    Barbara

    Hi Barbara,
    Refer this...
    Might be very usefull for you...
    enhancenents
    /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
    http://help.sap.com/saphelp_nw04s/helpdata/en/a8/bfc6373c8fea43bdb3541535bcbd43/frameset.htm
    regards,
    vasanth.

  • Delta Enabling for Enhanced field

    I have enhancement on standard datasource (Datasource is from Customer Service Appl and enhanced field is from PMCO table and its linked through OBJNR and OBJNR is Primary key in PMCO table and standard field in datasource). My question when users make any change to this field in PMCO table, this particular record is not being picked by delta. How should i make this field delta capable. Since OBJNR is generated is everytime a new order is created, and when they change at PMCO Table since there is no change in OBJNR no delta is picked up.
    I have another option is to ask user to do pseudo change on order when they make changes on PMCO table. Is there any other option for this so system can dynamically consider this change.
    Your answers are highly appreciated and rewarded.
    Regards
    Kunal

    Hi Kunal,
       I dont think you will get delta for your enhaced field until main record is chaged.
       We can not ask to chage the record for Delta.
       Try this:
       Create one more ODS and load data(in Overwrite) using generic extraction from table PMCO(If you have change data and creation data, you can selectively pull).
       While loading data from your main extractor, assign values for PMCO field in BW update rules from this ODS.
    Hope it Helps
    Srini

  • Enhanced Field is Blank - Debug with RSA3 - Unable to see the code in Exit

    Hi all,
        I have created a View on a table and created the Generic Extractor on that View and enhanced the Extract Structure to add a Amount field along with Currency Key. I have added the ABAP code to fill that new field. The same code has worked fine in Sandbox and copied the same into Dev. Everything worked fine and it populated the data into that enhanced field in Sandbox, but something is wrong in Dev. I have set the Break-Point after my Generic Extractor in the Exit's Include member ZXRSAU01 and tried to debug in RSA3, but it is not going there. Some how it is not recognizing the code in the User Exit. I am doing the same that I have done in the sandbox. Only initial values (0.00) are there in that field. That field is un-hided.
       What could be the problem, please ?
      Thanks in advance.
    Regards,
    Venkat.

    HI Venkat,
    Look at ur Datasource is Trancsaction Data or Materdata Attributes/Text.If it T.Data use Incled ZXRSAU01 or For Master Data attributes use ZXRSAU02 or Text
    ZXRSAU03.
    And Observe the Exit is Active or not and Debug the code once.

Maybe you are looking for