No excise duty for exports

Just so that I don't violate forum rules. I searched this forum for the keywords "Exports Excise Invoice". Did not find a question in the first three pages. So, I am posting mine.
Hello,
I'm working on a export scenario, I want the excise invoice NOT TO capture excise duty (none of these BED,AED,SED). I am not sure but I think it's called ZERO Duty Excise invoice. In exports, as we all know exports are excise exempted.
There are several items in the invoice(approx 15 items), unfortunately in my case the excise invoice is capturing all of BED,AED,SED for each material and my Excise Duty total is exceeding the total invoice(VF01). Which should not be the case.
Simply put my excise invoice should be similar to my commercial invoice in terms of Net value and each material value and it should print Zero Excise duty for each material.
To achieve my objective can I go to FTXP and for the TAX Code maintained for UTXJ put zero for BED,AED,SED and also make the excise condition types statistical in my pricing procedure.
Is this the right approach?
Edited by: SAP SD_Newbie on Sep 11, 2011 7:30 PM
btw, I am using TAXINJ
Edited by: SAP SD_Newbie on Sep 11, 2011 8:01 PM
To make my life miserable, they are using the same Document and Same pricing procedure for other exports scenario where it is mandatory to capture excise and other taxes(can't argue it's their requirement). So the second option of making the tax condition types statistical is ruled out. So, apart from FTXP do I have any other options.

Same pricing procedure for other exports scenario
where it is mandatory to capture excise and other taxes
It is nothing wrong capturing ED in export invoice but it should be statistical.
my Excise Duty total is exceeding the total invoice
Check in J1ID > Excise Tax Rate as to what percent has been maintained for those chapter ids. System will calculate based on this assignment only.
G. Lakshmipathi

Similar Messages

Excise duty for differential amount

Dear Sir,
i want to charge Excise duty to customer(Excise JV) but i dont have Excise invoice
is it possible?
Scenario is as follows,
Export invoice and excise invoice for 500 ton(qty)
After loading it on ship the weight is 520 tons.
now for additional 20 tons we are passing debit note on customer, i need to pay excise duty for 20tons
Entry at the time of J1IH
Excise duty Clearing A/c Dr.
Excise duty Basic Payable A/c Cr.
Excise duty Edu Cess Payable A/c Cr.
Excise duty Higher Edu Cess Payable A/c Cr.
pls suggest the solution
Reg,
Amol

Hi Suresh,
We will be passing debit memo from Finance module by passing FI JV entries so i wont be having Debit memo number.
any other way of passing Excise JV?
Reg,
Amol

Error in Excise Invoice for Export

Dear All,
I am making excise invoice for Export. I have different series group for export and domestic.
When I make a excise invoice from billing document for export which has different billing document type than domestic, the excise duty ( 16%, 2% and 1% ) are coming right in J1IIN. But as soon as I click the utilization button the 1% ( SECess ) gets flushed off and also tehe 2% figure changes .
Can u pls. guide me why this is happening. This is happeningonly in Export.
Pls. help urgent as the billing is stuck and i am closure of the month.
Regards
Sriram.S.

ALREADY SUGGESTED - REPRODUCED BELOW
Dear Sriram
If all the exports are under LoU, then Go to IMG -- Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Outgoing Excise Invoices --> Maintain Default Excise Groups and Series Groups.
Here for the combination of your sales area, shipping point, plant, excise group and series groups (for exports), maintain "U" +under the tab "Exports".+ Now retry.
thanks
G. Lakshmipathi
ps:- please spell the name correctly

Excise invoice for export

Friends,
While creating excise invoice for Export sale, we are not able to get value for Education cess and Secondary higher education cess, whereas with same configuration we could able to get all values for domestic sale. What coudl be the reason?
Please help on this.
Thanks

Hi
FIRST CHECK WHETHER THE VALUES OF BASIC EXCISE DUTY AND ECS ARE FLOWING INTO THE TABLE
J_1IEXCDTL
Ask your abapper
FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
""Local Interface:
*" IMPORTING
*" REFERENCE(YVBRK) TYPE VBRK
*" EXPORTING
*" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
*If you do not want the excise duty to be calculated for a particular
*transaction then you need to mark the flag supress_calculation as 'X'
*This flag when left blank will trigger calculation of ED during j1iin
*When it is marked, the ED copied from billing will be left as it is
ADD THE FOLLOWING CODE
SUPPRESS CALCULATION = 'X'
Regards
Amitesh Anand

Excise Invoice for Exports

Hi Gurus,
I have scenario of Exports under bond,Deemed export,Exports to Nepal and Bhutan.
I have maintained one series group and one excise group for the plant where manufacturing and sales is done.
When I am creating ARE for this excise invoice for exports system displaying info,"Excise invoice not meant for exports'?
Why this error?
Please reply,it's urgent.
Thanks in advance

Hi Vasantha
The Excise Transaction type for Exports should be <b>DLFC</b>.
Check the settings for DLFC transaction with respect to excise Group in IMG, select Logistic general --> Tax on Goods Movement --> India --> Account Determination --> specify G/L account per Excise transaction.
Thanks
G. Lakshmipathi

Excise duty for some line item of material document is not posted

Dear CIN Exerts,
In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
Now the problem is that we wants to post excise Duty for those material WRT material document for whom it was not posted.
Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted) in MIGO > Document Display> Excise items tab .
Regards,
Ashutosh

Excise posting is not recommended by sap for movements 103 or 105.
Refer or search for SAP notes with subject CIN Limited functionalities.

Cancel Excise Invoice for Export

Hi all,
can somebody let me know procedural steps to cancel Excise invoice for export consignment from end user point of view ?
please do the needful.
thanks in advanced

Hi,
Please follow the below mentioend step:
1) Go to J1IH or in J1IIN click on cancellation tab .
2) Enter the document number and document year and series group and press enter
3) Check whether this is the right excise invoice ur cancelling . if its right document save it.
If you have created it with reference to export proforma invoice than cancell the proforma and create a new proforma invoice and against the new proforma create new excise invoice as reuired.
To cancel the proforma export invoice follow the below mentioned steps.
1) Go to vf02 and enter the billing document number .
2) on the main screen only click on billing document tab at the top and select complete from the drop down.
3) once you click on complete system will automaticall cancel the proforma invoice status.
Hope this will help you to resolve your issue.
Regards,
KRishna O

Excise Duty in Export Invoice

Hi Gurus,
I have created a Export delivery & Billing Documents. I am trying to create Excise Invoice in which Excise Duty values are coming as "0". We are using TAXINN Procedure on ECC 6.0
Is there any specific note or any customization required for this , because due to this ARE1 is also givibg "0" values & subsequent "0" value in Bond Register.
Can anybody help me on this ? It is very urgent.
Thanks in advance
Vikas

Closing the thread.

GL account for excise duty for sales and excise JV

Hi
When i did billing in VF01, entry posted:
Customer A/c Dr. 115
Sale Revenue A/c Cr. 100
Excise collected on Sale Cr. 15
(We can split Rs.15 to BED, E.Cess and SH E.Cess a/c )
During excise invoice creation, entry posted:
Excise duty(expenditure) A/c Dr. 15
Excise duty BED payable Cr. 12
Excise duty E.cess payable Cr. 2
Excise duty SH E.cess payable Cr. 1
Now i want to know where we specify following GL accounts. Do we specify in VKOA or ETT table:
1. Excise collected on sales A/c
2. Excise duty(expenditure) A/c
Please suggest.

Please go through the ETT GL determination in detail your doubt will get clear.
In ETT we put GL for BED, ECS, HSECS (AT1) for payable and receivable through which CENVAT SUSPENSE A/C get triggered through these three accounts. these we maintain in specify excise account per excise transaction.
Hope this will help you to understand the basic.
Reward points if helpful
Tanveer

Excise Duty for STO.

Hi.
My mfg Plant is in excise free zone.
my Depot is in Non excise free Zone.
STO is done from plant to Depot. Will that go with excise invoice?
From Depot to Customer when i'll do sale, Shall i charge excise duty to customer? or it will go with excise duty with Zero Value?
Reg,
Amol

My mfg Plant is in excise free zone.
my Depot is in Non excise free Zone.
STO is done from plant to Depot. Will that go with excise invoice?
Obviously, you need to generate an excise invoice when any material goes out from a manufacturing plant to Depot.
From Depot to Customer when i'll do sale, Shall
i charge excise duty to customer?
Yes you have to charge on customer
thanks
G. Lakshmipathi

Excise tab on basic excise duty for po

hi friends,
My requirement is : while doing gr in migo for that when we check (item ok - check box) then condition is : if that po bed is not zero ex 16 % then excise tab has to display else ex 0% excise tab shouldn't appear. Can u plz sujjest on this ??
with regards,
prathyusha.

Hi Rahul,
Yes this can be customized in SBO with or without add-on.
First step would be understand the complete business process of the customer and then map in SBO accordingly.
You would have to create many udf's at row level to capture the details at the time of purchase and you can use the same references at the time of sale of the item.
As I have mentioned before, it may take extensive customization, so you can decide whether you woudl like to create an add-on for it or woudl you like to handle this through SP, fms etc.
Thanks,
Joseph

Excise invopice for exports

Dear guru's
In creation of excise invoice J1IIN( FACTORY) after selecting UTILIZATION(F6) the value of Higher education cess is disappering. before UTILIZATION(F6) the value of Higher education cess is there but when ever i go for UTILIZATION(F6) the value is disappering is there any customization setting for this

Dear maduganti
Once you clicked the utilization button, once again click the pencil icon next to Excise Invoice type.
thanks
G. Lakshmipathi

Excise duty for manufactur plant.

Hi,
we have only one plant. so deliveries are takes that plant only. In Excise configuration i treated it as a manufacturing plant ( not depo).
But in the pricing procedure we have BED. I maintained it as 16%. So the value is coming in the sales order and billing. While doing the J111N the BED is not coming.
Is it the reason i maintained as manufacture plant thats why this value is not coming?
In this scenario what are registers to be updated? plz give suggestions on this .
regards,
v.s.vas

Dear vas
Just now you posted the same question with the subject "RG23D" and many friends are responding to you. If your problem has not been solved, please explain your problem clearly.
Please dont post the same question with different header !!!!
Thanks
G. Lakshmipathi

Accounting document for Export Excise invoice

Dear All,
We have two scenario's one is Domestic Sales & Export Sale.
In domestic sales as per the normal flow of document we create excise invoice after billing document and accounting documents are also generated and updated in the billing document accounting (VF02). Accounting document for excise invoice has been generated.
However in export sales we create excise invoice with the reference of billing document but no accounting document has been generated for excise invoice.
Can u please tell me where i have to make changes so my accounting document for export excise invoice will generate?
Thanks & Regards,
Ratish

Hi ALL,
There are 4 export scenario :
1) Deemed export 2) Export under Bond 3) Export under claim for rebate [No bond] 4) Export under Letter of Undertaking.
3) In export under no bond process is :- we pay the excise on the goods for exports and create the ARE-1 doc and send to port where the customers officials note the actual quantity of goods on the ARE-1 doc and stamped it. Then these stamped ARE-1 will be send to the excise range of the despatch plant(for exports) where we claim the rebate.
Now if you are not able to generate the accounting doc for such a scenario some of the consultants may suggest u to use the user exit (J_1I7_USEREXIT_DUTY_IN_EXPORT) and pass the the value X to the parameter SUPPRESS_CALCULATION this intern will help u to generate the Accounting doc also. but real problem lies somewhere else.
Actual Solution: Maintain J1ID (Customer excise details)
for export customer maintained the excise indicator to 3 {Nil Duty} insted of 1 {100% tax}.
Problem will be solved
Regards
Satish Zade

Excise duty credit against customer in Export under Bond

Hi dude
In export under bond process, billing document acct determination document the excise duty + net value is showing against customer. Is it correct ? Please let me know the values credit in the billing document.
regards,
madhav

Hi,
In case of Export Sales Under Bond
The accounting entry is:
Customer Account Dr
Revenue (Exports Sales) Cr
In case of Export there is no accounting entries for excise bcoz of exemption of excise duties for export.
Only u have to create ARE1 for Export Sales.
Regards,
PM

No excise duty for exports

Similar Messages

Maybe you are looking for