No print!! all the test went good.ip correct .all perfect .no print hp5510

Hi I have a printer hp photoshop 5510 was working perfect and yesterday I was trying to print and it is not working at all.showing me information--Unable to communicate with printer!! so I have checked everything .like wifi connection ,IP address ,software update ,I have used HP Print and Scan Doctor and many other programs to find a problem!! Nothing works!!!I can scan documents and they are appearing in my computer without any problems.I can print raports from my printer as well and all tests .but I can not send any print from my Laptop.please help if someone does know the problem.thanks

Does your PC's security system have a firewall as part of it? Disable that firewall and try printing again.
Can you type the printer's IP address into a web browser and see the printer?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Hi, I have a mid 2010 with 17.5 inc screen. My os is 10.6 snow l. I went apple to download 10.8 os . Download went good. During installation my Mac shut off. Now I get a white screen with a folder that has ? In it. Please help

Hi,
I have mid 2010 iMac 17.5 screen with os 10.6. Went to apple site and downloaded 10.8 for 20 dollars. Here is my first question, did download the wrong thing.
The download went good. My iMac restarted an started installation halfway trough it shut my Mac off. Now when I start my Mac up all that shows up is a white screen that has a folder with a question mark in it. Please help, I don't know if I downloaded the wrong thing or if something else is wrong.

http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US
"Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear."

Restrictions in ChaRM - SDHF - Developer must not be the tester

Dear Experts,
we are using the SDHF correction and we want to check the workflow with system rules.
So is it possible that the developer of a SDHF correction can't be the tester of a SDHF correction?
We want to restrict this.
Regards,
Matthias Sander
Edited by: Matthias Sander on Jan 6, 2011 2:08 PM

Hi Matthias,
This is very much possible. Please have a look at activity "Make settings for change transaction types" (img activity ID SOCM_MAIN_001)
Create procedure type (select SDHF) / Assign conditions. In that list in E0005, the condition "SAME_USER" must be set to "Cancel" or "Error" instead of "Warning"
Hope that helps!
Federico.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

All of our iOS devices are displaying the message that they can't connect to the Internet. All show good wifi connections. Our Macs all connect to the internet just fine suggesting that the network is good. I'm stumped.

Airport Utility on the Macs show good internet signals but on our two iPads and my iPhone 5 there are no indications of internet connectivity. One of the iPads is running iOS 7 but the other is still running iOS 6. The iPhone 5 is updated to iOS 7.
Is there a setting switch that if set incorrectly would create this problem? Like I said before, all the iOS devices stopped internet connectivity at the same time.
Update: Well while I was typing this I was called away to help get people to bed etc. And when I got back I tried all four iOS devices and, now, they all connect to the internet. I don't understand it. Two iPhones, different iOS versions, and two iPads, different generations and also different iOS versions, all decided that they would disconnect themselves from the internet but stay connected to the wifi network. Somebody must have an explanation for what just happened. Remember it isn't the router because the Macs all had uninterrupted internet connections. Weird!

I used to have a satellite connection to the internet. When ever the power went off I was told to turn on the devices in a specific order for them to work properly.
Try shutting off every device including all iPads, iPhones, computer, Wi-Fi router and Satellite modem. Then turn them on one at a time in the order listed below. Be sure to wait until each device completes its start up routine before starting up the next item. When my satellite modem was restarted it often had to download an update. The time this took varied with the update. So be sure the Satellite modem is up and connected to the Satellite before going to the next device.
1. Satellite Modem.
2. Wi-Fi Router
3. Your computer. Check to see that your computer connects to the internet.
4. iPad or iPhone and remaining devices one at a time.

How can I print the test page with the Arabic type from the command line

Hi,
I have been trying to make the tool for printing the test page from the command line on the Arabic OS. I used "rundll32 printui dll printuientry" with "/k /n" options. My tool is to print the test page in all OS when pushing the
button.
Normally, in the Arabic Windows, the test page is printed with RTL type when printing the test page in the "Devices and Printers". But in my tool, the test page is printed with LTR type. I'm confused because of this result.
Is it possilbe to print the test page with RTL type when using the "rundll32 printui dll printuientry"? If it is possible, could anyone give me the hint or information for resolving?
Please check for me.

Hello,
Thank you for your post.
Your issue is out of support range of Test Tools in Visual Studio 2010 and 2012 forum which discusses Visual Studio Test issues.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it

We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!

No guarantess but try smc and pram resets,

I was updating my iphone in itunes, then it said the update went wrong and now does not recognize the phone. Says that it is an unknown iphone and I must restore the phone. How can I get it back without deleting all of my stuff?

I was updating my phone in itunes and the "update went wrong" and now the phone is not recognized by itunes. I unattatched the phone and it wont turn on or off, just shows a picture of the itunes symbol and a usb cord. In itunes it says that it is an unknown iphone and is in recovery mode so I need to restore the phone. If I restore the phone I loose all my pictures, which I dont want to do...and my contacts. Is there any way around this, so I can get my phone back to normal without wiping it all out? Thanks

To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up?

I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?

I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Printing a putaway label at the time of Goods Receipt

When the Goods Receipt(GR) is done for the stock in interim receiving area (Storage Type 902) then the put-away labels are printed from Transfer Order for GR.
Users will take the labels and move the materials from staging area to destination bins according to information printed on the label. There should be feature to re-print the labels (from spool standard SAP function) as and when needed.
Currently at the IDC location, the following process is utilized; The WMS system produces a putaway label at the time of Goods Receipt. The label print screen in WMS asks for the load ID of the received load and the operator selects label type l and the barcode printer it should print at. The label is automatically printed and sent to a pre-assigned printer. The label is then used to identify the location which the material is to be relocated to from the receiving area, either a picking bin location, or a surplus bin location for storage and replenishment purposes. The label has Job Type, Receipt Date, Quantity, Material Number & Description, Operator I.D., Number of pallets/boxes, Unit of Issue, Serial Number, Destination bin and Load I.D.
can any one guide me on this!! ASAP

do you mean when a GR is printed, it shud automatically print the label as opposed to the manual process now?
In that case you may have to find a user exit that is triggerred upn saving the GR and call ur label program from there.

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the the on and menu button to reboot it and so it shut of and came back on and been on the loading screen for an hour. What can I do to fix it?

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?

- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on

Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4972 I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures,

I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures, contacts. Is there a way to recover all my info?

You should be able to reconnect to iTunes and then you should see an option to restore to your ipad from your last back up in iTunes.

Printer officejet 4500 G510-m only prints the test page

What can I do?!?!?!?
the same problem here, although I have two laptops, one of them with windows 7 and everything is works great, made a full installation of the printer app, while on the second laptop with windows xp pro, the printer doesn't work.
Tried to install the full pack and tried the minimal one, didn't work in no one of these states.
the sole thing it can print from the win xp laptop is the test page from the printer configuration window..

What operating system?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a hppsc 1310 series that prints the test page, butr will not print the selected document.

I have a hppsc 1310 series that prints the test page when turned on, but will not print the document I want to print. It shows in STATUS as printing, but it does not print. I keep getting a message to install software and I do this. I then get a message software installed, but it still will not print. This just started about five days ago.

Hello ausection29,
Most likely what is printed when you turn on the PSC 1310 is an alignment page. To complete the alignment process you need to place this page on the scanner glass and press the Scan button. The top of the page should be towards the left of the printer I believe, double check this on your printer (there should be a small icon next to the scanner glass showing which way the paper should be placed on the glass).
You can have a look at step 5 in this document for a video of how to do this:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577355&cc=us&lc=en&dlc=en&product=374568&tmp_...

No print!! all the test went good.ip correct .all perfect .no print hp5510

Similar Messages

Maybe you are looking for