Not getting Rate(%) of Tax

Hello Experts,
I want to display in my report rate(%) of Tax for Excise , Sale Tax ,TCS,VAT.. etc against each material in invoice.
I m getting amount for different condition types for diff taxes but not the % of Tax
Plz suggest.
Aastha

Hello all,
No response ,so closing the thread.
Aastha

Similar Messages

Discount at header level not getting printed when tax exempted.

29.09.2008
Hi friends,
I have incorporated Header discount in my Sales Order. Since there are no deliveries, invoices are printed against Sales Orders. The invoice output shows the discount if the tax classification of the customer is 1 (Liable for taxation). But strangely if the customer is exempted from tax, the discount entered at the header level is not printed on the output even though i can see the discount computed in the invoice.
Please suggest how i can sort this problem out.
Regards,
Udaynath.

Thanks Khaled,
but it does not work bcos as the item category group LUMF takes the price for the component (and the header price is not displayed), then if I set up the price ref. mat. of the components to be the header, the total value of the order will be zero (since price of the header material is zero).
Any other idea?
I was thinking in creating a rule to apply the discount of the header condition at the sub-item conditions, but I am not sure whether this can be done.
Regards
Julian

Tax classification not accepting rates

Hi,
I have added row 65 for tax classification in access sequence (Check calculation procedure) with table value 3 and when I try to enter rates in FV11 the rates are not getting saved. Please advice

Hi,
The Proper Condition type should be created with assignment of Access Sequence, and then you can assign the rate for the Sequence.u2013 Tax on Sales/ Purchase- Basic Settings- Define Condition Type
Regards,
Sridhar Sha

Tax does not equal 0 when tax rate is Zero

Hi,
We have a problem when posting an invoice through MIRO. The end user gets the message 'Tax does not equal 0 when tax rate is Zero'. I checked the tax code and it looks fine.
Can anyone throw some light on the error?
We are using vertex for tax calculations.
Regards,

Hi Raj,
Please chek OSS NOTE 681538 .
Check for the applicable releases and support packages from the note.
Check from your system on what support package you are into. Goto System -> Status -> click on the magnifying glass against Component version and see what is the support pack for SAP_APPL.
You can ask your Basis colleagues also to check if it can be applied into the system. I guess they would check it through t-code SNOTE.
Regards
Surya

P Tax is not getting displayed in the payslip

Hi All,
The P Tax is not getting displayed in payslip. I have checked the customization again but no use. In PA30 (IT0588) i have 'checked' the box for P Tax eligibility and have also assigned /3P3 in the form IN01 in window 2 (for deductions).
Please help.
warm Regards,
Shruti B.

Hi,
Thank you All.
Regards,
Shruti B.

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Taxes are not getting displayed in PO Print

Hello Everyone!
       My problem is,
           I am working on PO Print. In production server in case of one PO item I have applied tax conditions 'ZBRO' and 'FAS2'... to display these taxes for this item in PO i have written code in elements
'ITEM_CONDITIONS' and 'ITEM_CONDITIONS_UNIT' (My SAPscript name is ZMEDRUCK which is a copy of standard MEDRUCK with chnages). For other POs these taxes are gettindg displayed as they are going through elements 'ITEM_CONDITIONS' and 'ITEM_CONDITIONS_UNIT'.
          But in this PO it is not going through elements 'ITEM_CONDITIONS' and 'ITEM_CONDITIONS_UNIT' so I m not getting these taxes displayed in PO Print.
          Please help me..its urgent.
       Thanks & Regards,
                    Pranil Shinde.

Hi there
In the pricing procedure check print is marked as X against to the condition type
Reward if useful
Regards
SE

Taxes are not getting updated in PO

Dear All,
I have done some changes in pricng and tax calculation procedure.
But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
Is there any other way for updating the tax calculations at invoice tab in PO.
Regards,
Rakesh

>
Rakesh Shelar wrote:
> Dear All,
>
> I have done some changes in pricng and tax calculation procedure.
>
> But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
>
> Is there any other way for updating the tax calculations at invoice tab in PO.
>
> Regards,
> Rakesh
Only other way possible is abap script to be made to change Po data without changing the release. Otherwise you need to unrelease the Po's first, then change the data and then save for your changes to get affected.

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Tax not getting computed in Sales Order

Hi All,
I have an issue in VA03 in conditions tab in Sales order. The Tax field is not getting generated. It's not calculating and showing 0,00. Can you please help me out on this for proceeding further.
Thanks,
pradeep
Moderator Message: Please don't post discussion title in all CAPs. FYI, posting in all CAPs is equivalent shouting. Please use meaningful and precise subject title to represent your discussion. In addition to that as being question, the post is un-mark as question. Points free discussion.
Message was edited by: Jyoti Prakash

Goto condition tab and see the Analysis Tab and here you can see the complete Analysis for the Tax condition type(example MWST). With this details i hope you can resolve the issue.
thanks,
Srinu.

With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc

Hi All,
I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get populated in SAP.
Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
Thanks in advance

Hi,
I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
Anyone any idea?
Regards
Stefanie

Actual rates (KBK6) is not getting picked up for CPTA (template allocation)

Hello Experts,
I am using template allocation for the purpose of overhead calculation. I maintained rate in KP26. It is getting pulled up when I ran standard cost estimate. This is correct
Now I want to run CPTA (ie. charging overhead at month end) using actual rate. Hence I maintained actual rate in Tcode KBK6. Actual rate is little bit varying with KP26 rates. Hence I want to run CPTA with actual rate.
When I executed CPTA, I saw that system is picking up KP26 rate and not KBK6 rate. Please help me. How system will pick up KBK6 rate for CPTA.
--Meena.

Hi Meena,
The correct sequence of closing should be:
1. Template Allocation - CPTA
This will post activity allocation from CC to your production order at PLAN price.
2. Calculate Actual Activity Prices - KSII
This will calculate actual price based on costs posted to CC and activities allocated (try to avoid KBK6 in your testing but rather calculate actual price properly). It will also credit CC but will NOT debit the order.
3. Revaluate your production order - MFN1
This will debit the order with the difference between plan and actual activity price.
Please kindly read SAP Note 156563 - Settlement after activity allocation/revaluation.
It explains revaluation logic in detail.
If in your case CPTA generates activity allocation between CC and order (valued at plan price) and KSII calculates new actual activity price, MFN1 has to update the order.
Regards,
Szymon

REGUP Table Withholding tax field not getting updated

hi friends,
from a specifc date with holdiing tax is not getting updated in REGUP-QBSHH field, so in payment advice its not getting displayed. can any one help me wat could be the problem for this
thanks
nagaraj

hi amir,
i dont have test case for that. till 28th of the last month the field has been updated and after that till now all the entries in that field is showing zero. but when we check in FB03. i can see the with holding tax amount. can u tell me how this table is getting updated
thanks

Tax code not getting picked up from PO during SES

Dear Experts,
I am looking for configuration where the end user need not enter Tax code during SES. I tried a scenario where I did not maintain any service master and also did not enter any line item in service tab at item level, rather I processed my PO using limits.
Now when I prepare SES using this PO, Tax code is not getting picked up from PO and some tax code(I1) appears. Since I don't want end user to input any tax code I've left it blank.
Finally when I am doing MIRO, i am not able select the desired Tax code(say I8) as it is not available for selection. I get only one Tax code(say I1) available for selection. Even other Tax codes are not available for selection.
Please advise, how do I resolve this, why is the Tax code not getting picked up in SES? and why am I not getting other tax codes for selection in MIRO?
Thanks and Regards
Mansih

Hi,
Tax for service maintained in the service PO in the INVOICE TAB in item details. You are not going to maintain the service tax during SES. In SES you are just recognizing / confirming the vendor performed /completed the required service given to him.
During invoice tax code will flow from service PO to Invoice & you need to just select check box u201Ccalculate taxu201D & remove default tax code in MIRO, if any tax code set for default entry in MIRO. If you want your service tax code should appear in the MIRO screen then just activate in t.code:OBZT (relevant for all transaction),then you can select your service tax code during invoice verification WRT service PO.
Regards,
Biju K

Not getting Rate(%) of Tax

Similar Messages

Maybe you are looking for