ODI sendmail clearing error status.

I'm running log level 0 because I only want to see errors. I've also setup odisendmail to e-mail me an error occurred. This is where the problem comes in.
Even though a step failed, ODI flags the entire job green because the last step completed successfully.
Does anyone have a suggestion besides changing log level or adding a bogus step to maintain the error state?
Best case solution: If someone could point me to a substitution method that e-mails me the error. Figured this part out.
Edited by: user6732252 on Mar 17, 2009 8:21 AM

odi has 2 option for sending a mail..
1-->odi send mail option in the package
2-->and using jython procedure
if u wan to see the errors use jython procedure...and there check if the ignore errors off..and try it may work...

Similar Messages

ODI HTML Mail error

Hello All,
I am unable to send a mail using ODI send Mail. As an alternative i downloaded the jython script "TRT_Send_Jython_HTML_Email.xml" from the oracle support.
When i am trying to execute the above procedure i am getting the following error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 3, in <module>
File "C:\ODI11\oracledi\client\jdev\extensions\oracle.odi.navigator\scripting\Lib\smtplib.py", line 676, in sendmail
if not (200 <= self.ehlo()[0] <= 299):
File "C:\ODI11\oracledi\client\jdev\extensions\oracle.odi.navigator\scripting\Lib\smtplib.py", line 398, in ehlo
(code,msg)=self.getreply()
File "C:\ODI11\oracledi\client\jdev\extensions\oracle.odi.navigator\scripting\Lib\smtplib.py", line 352, in getreply
line = self.file.readline()
File "C:\ODI11\oracledi\client\jdev\extensions\oracle.odi.navigator\scripting\Lib\socket.py", line 1347, in readline
data = self._sock.recv(self._rbufsize)
File "C:\ODI11\oracledi\client\jdev\extensions\oracle.odi.navigator\scripting\Lib\socket.py", line 902, in recv
raise mapexception(jlx)
socket.error: (55, 'Software caused connection abort')
 at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
 at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
 at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
 at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
 at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
 at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
 at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
 at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
 at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
 at java.lang.Thread.run(Thread.java:662)
please help me in this...
thanks
Ravikiran

Why can't you use ODI sendmail? Are you getting an error from it? I've used it successfully for some time now.
The socket error tells me there's a network problem. Are you able to send e-mail from the machine where the ODI agent is? Did you try telnet <your SMTP server IP> 25 ?

Product: Java X Update X.. removal failed or error status 1602

Hi
Managing several different environments I repeatedly run into the same error on "to many" computers.
We use SCCM as our primary distribution tool and install Java using the embedded MSI and a custom made MST.
End user platform is: Windows XP and/or Windows 7
The installs works flawlessly in 95% of all cases but the remaining 5% are still a big hurdle to have to handle manually.
Problem:
Installing the newest version returns error code: 1602.
For a long time I have been ignoring it since it generally means that the end user has cancled the installation. But upon furter investigation I have found out that this is not the case.
On the individual computer the eventlog actually reports: Product: Java X Update X.. removal failed or error status 1602.
It is the uninstall of the previous version that fails.
Does anyone know what causes this and possible a solution?
Best Regards,
Christian

The same problem happened to me. When upgrading from JRE 1.5.0_5 to JRE 1.5.0_6, suddenly no applets would load, and all I could see was the little red X.
I tried to change proxysettings (I dont use a proxy, but it is told at http://www.java.com/en/download/help/redximage.xml that it is due to wrong proxy-settings). It didn't help.
I tried to turn off zonealarm. It didn't help.
I tried to clear the browsers cache. It didn't help.
I have been using both Firefox 1.5, and IE6. None would load the java-applets.
So I uninstalled all older JRE versions and installed JRE 1.4.1_02. It worked!
I then tried to upgrade to JRE 1.5.0. It didn't work.
Now I am back at JRE 1.4.1_02 without knowing why I had to downgrade through 6 versions that through the last year or so has been working fine on my machine.
I have no idea why it suddenly wouldnt work with the newer versions.
Any ideas?
Thank you.

Facing the error : Status and active flag in one item do not match

Hi Experts,
I am getting error : Status and active flag in one item do not match in GOA distribution and while adding item in the item data , following are the relative information :
I am using SRM 4.0 and Item is free text.
Please help if you have faced such an error.
Thanks,
Atul

question not clear. you have activate one line item and the same not in ECC contract.
for ex
4600001000 - GOA
item 1 - active
ecc
4600001000 - contract
item - inactivate
-locked
muthu

Some times Child Job with error status

Hi,
We are running some standard report periodically, this report is generationg some child jobs.
Problems is that these child jobs, somtimes are failed with error status.
This is happening very few times,may be 2 or thrice a month.
There's no explanation on this.
I am running with 4.6c version and my Basis is 620.
Can you please add some valuable suggestion for this.
Thanks,
Anmol.

What is your question? How to stop the spawned job or how to stop the errors? What program? What is the error or the condition that triggers the error? You have to give more information and be clear about the desired result...

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

ODI "Session Stopped" Error when refresh a variable

Hi ,
I have a error using ODI when I refresh a global variable and odi report this error information as "Seesion Stopped"!!!
Does anyone come across it? Do you have any suggestion to me?
Thank you in advance!
Jack

Have you got any constraints defined on your datastore at all ?
Static control is set to what on your interface?

ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

Hello,
When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
When I manually download the latest copy of itunes and double click to install it, it failes with :-
iTunes installer completed
The installer encountered errors before iTunes could be configured
Errors occured during installations. your system has not been modified
Please run the installer again. finish to exit
When I look at the event loggs I can see :-
Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
Many Thanks

Hello there, G-Oker.
The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SAP PI Message Cancellation Alert - Message does not have restartable error status

Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
Sudheer

Hi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

How do I clear Error 1311 when downloading Adobe Reader 11

How do I clear Error 1311 when downloading Adobe Reader 11 ? Cannot find missig file C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AB0000000001}\DATA1.CAB

Try the MSI installer http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi (English version 11.0.0 for Windows).

ODI sendmail clearing error status.

Similar Messages

Maybe you are looking for