Ok my phone was working fine two days ago and it stared to say connent to itunes how do i get it off
ok my iphone 3gs or 3g was working fine two days ago and it stared to say conniet to itunes can u help me
Hi agforlife2010,
If your iPhone isn't responding and is displaying a screen indicating you need to connect to iTunes, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden
Similar Messages
-
My iPad won't load web pages, even though it was working fine two days ago.
Up until 2 days ago I had no problems with my iPad 3.
However now it will not load any web pages at all (Using Safari). In order to get it to load web pages I either
have to reboot or turn it off and then on again. It then connects but only ever to one page at a time.
I don't understand what the issue is since it was fine before. It is not my Wifi network as it works fine on
other laptops.Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
For some reason, starting yesterday, I tried to open iTunes and it said that it had stopped working and that I needed to uninstall then reinstall it. I did that and each time I have reinstalled it, it says that it was installed incorrectly and to please reinstall.
Many thanks.
If that's the only message it's giving at the moment (it's not also giving another mentioning a specific file), I'd try the following document first:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings
OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!
-
Hi, my phone was stolen a few days ago and just a few days ago the phone was online and it automatically locked itself since I've put it under lost mode and the thief probably switched off the phone immediately so that I cant locate it. Is it possible for me to have the last known location where he/she turned on the phone so that I can track it down from the last location? Thank you
Correct.
The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored. -
Extensions is greyed out in Photoshop CC 2014. Was working fine a day ago.
What is going on with CC? One day it works fine the next day something goes wrong! I can load extensions and show they are active but when I go into PS CC the extension is greyed out!
It turned out that I looked at the responses of others! They were all wrong! The simple resolution to the problem is to trash the prefs! Everything came back to order.
-
D700 Tether not working in Aperture 3 worked fine two days ago in Aperture2
Under Tether Start Session is available however nothing happens when I click "Start Session" The HUD doesn't launch nothing happens. Start Session is still available, but Nothing.
I had the same problem with my Rebel XT but I figured out why it wasn't working. You just need to select or create a new project (highlight it) then choose "start session". It SHOULD work because that's what I did. Hope this works for you!
-
I can't download apps or music on my iphone4s. The loading blue circle keeps turning and it won't let me enter my password. Any suggestions? Was working fine one day then the next it's not.
Hey, I understand how ****** off you must be at getting bounced around . It most likely has something to do with some port being blocked by your internet service provider or on your router. http://support.apple.com/kb/TS3297 lists ports 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999 as ports that need to be open for you to connect to the itunes store. I would recommed contacting your isp and making sure that they are not blocking anything (in a nice unaccusing way, you never know, it might not be their fault), or if they can help you determine if your router is the cause. Before you do that you could also make an appointent with the genius bar at your apple retail store to make sure you can connect to the itunes store on their network, although if you can connect to wifi through safari, it probably is not related to the wifi hardware of your device.
As last ditch efforts, I would try updating your device http://support.apple.com/kb/HT4623 (I recommend backing-up your device http://support.apple.com/kb/HT1766 and any itunes purchases http://support.apple.com/kb/HT1848 just to be sure). If that doesn't work, I would restore it and set it up as a new device through itunes on a computer, that will wipe out any problem software and install the operating system as new, you can then test it to see if the issue was related to any software you had on it.
Let us know what you decide to do and if any suggestions helped. Good luck. -
My iPod Classic was working fine all day. Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod. I've tried both headphones and a docking station......nothing. The songs don't even engage, they skip to the next one. I've tried rebooting the iPod and still nothing. Any ideas?
KimHi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs. -
when I add a new contact number to my iphone 5c and I try to select the iphone choice is not showing up; and it was working fine the day before. ?Also when I try to send an imessage is not going trough as an imessage, it makes me send it as a message.
You're using Exchange Active Sync to synchronize contacts and calendars with your company Exchange Server. If the default calendar/address books are set to the Exchange account, it will sync automatically. This is normal.
Go to Settings>Mail, Contacts, Calendars to change the default address book and calendars to a something else, iCloud or something synced from your home computer instead. -
iPad was working fine yesterday - day 3 being in London - but is not picking up carrier today - what can be done?
Are you referring to wifi or cellular?
Cheers, Tom -
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
Hi, i ma using Firefox 4 in widows xp 32 bit,
Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.Hi, i ma using Firefox 4 in widows xp 32 bit,
Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day. -
The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound. I updated software today. Still sound & video not working.
Please help.One of the following steps should help.
1. Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content:
Click in the box for "Enable Plug-ins".
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box for
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes next to all items.
Check the box next to "Remove all website data".
Click "Reset".
5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
Safari > Preferences > Extensions
Best. -
my phone was working fine, the battery ran out and the power shut off. now im charging it and it wont come back on?
Hold the home and power button down at the same time until you see the apple then let go..
Maybe you are looking for
-
Can I get all my stuff back after a reset even if it hasn't been backed up for months?
First of all I wanted to change my passcode. I knew the number I wanted to change it to, so I changed it. so later when I tried to get back into my iPad, the so called "new" passcode didn't work. I tried variations in case I somehow managed to stuff
-
GL Drill to AP and AR in BI Apps
Hi All The client I am working for ,needs a drill from their GL report to subledgers (AP & AR).I have just checked this link http://download.oracle.com/docs/cd/E14224_01/doc/bia.795/e13669/odi_anyimp_configfinance.htm ,however we have few customizati
-
Hi Gurus, I have a incoming xml file which is split into multiple debmas idoc for ecc. In message-mapping, message-tab source message occurance is set as '1' and target is set with "0...unbound" On target:idoc There is NO mapping for Messages and Mes
-
Update pricelist and volume discount
Hi Experts, I want to update an existing pricelist with date and volume discount. Now i use the same xls as i used on first import but i get the error message in DTW. Invalid value in Quantity field - apllication defined error. I have 3 files. 1 file
-
DLL in Installer einbinden funktioniert nicht richtig
Ich habe in meine LabVIEW 8.6 Anwendung eine externe .NET-DLL eingebunden. Dies funktioniert soweit auch wunderbar. Diese DLL liegt mit in meinem Projekt-Verzeichnis und ich habe sie auch in die Projektstruktur aufgenommen. Wenn ich nun eine Applikat