ORA-00245: control file backup failed; target is likely on a local file sys
Hello,
our RAC (Linux, 11.2.0.3.0) is rather new and we are still on gaining experiences with that system...
When starting the backup with RMAN we are getting the following error:
Starting Control File and SPFILE Autobackup at 04-JUL-12
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 07/04/2012 16:41:48
ORA-00245: control file backup failed; target is likely on a local file system
The reason for the error is clear ORA-00245 - in a RAC environment the location of the Snapshot Controlfile must be on a shared location.
When executing the RMAN command "show all" on each node, we are getting
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD021.f'; # default
for node #1
and
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD022.f'; # default
for node #2
When using a shared location for the Snapshot Controlfile do we still need to setup 2 different names for that file?
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/<shared location>/snapcf_PROD021.f'; # default
for node #1 and
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/<shared location>/snapcf_PROD022.f'; # default
for node #2
Or should we configure just one Snapshot Controlfile?
The RMAN setup for "CONFIGURE SNAPSHOT CONTROLFILE NAME TO..." must be changed on both nodes - correct?
Hopefully my question is clear enough - any help will be appreciated.
Rgds
JH
Edited by: VivaLaVida on 05.07.2012 11:41
No, it must be configured on a shared storage:Not really required, i've RAC setup and snapshot is configured on local storage.
Configuring the RMAN Snapshot Control File Location
The snapshot control file is a copy of a database control file created in an operating system-specific location by Recovery Manager. RMAN creates the snapshot control file so that it has a consistent version of a control file to use when either resynchronizing the recovery catalog or backing up the control file. In Oracle RAC, the snapshot control file is only needed on the nodes on which RMAN performs backups; the snapshot control file does not need to be globally available to all instances in an Oracle RAC environment.
See below from doc.
http://docs.oracle.com/cd/B28359_01/rac.111/b28254/rman.htm#i455026
Similar Messages
-
Export to Export Files backup failing w/Resource temporarily unavailable
Hello,
I'm trying to backup my RAC database through EM using "Export to Export Files" and exporting the entire database. When I run the "Test Disk Backup", the directory tests with success. However, about 11 minutes into the job, the job fails with the errors below. I am using Oracle 10gR2 on Linux x86_64 and trying to do the backup using a Samba server.
ORA-31693: Table data object "SDE_DL"."SDE_BLK_42" failed to load/unload and is being skipped due to error:
ORA-19502: write error on file "/backups/EXPDAT01.DMP", blockno blah
ORA-27072: File I/O error
Linux-x86_64: Error: 11: Resource temporarily unavailable
and on and on...
Any suggestions?
Thank you,
MimiHello Ashok,
This could very well be my problem. I am trying to export 8TB of data! I'll check out the mounting options to figure out how to mount it with the largefiles option.
Mimi -
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
Please resolve error ORA-00245:
Hi
what is the solution of foloowing error
11gr2
aix
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 06/20/2011 10:23:57
ORA-00245: control file backup operation failed
thanksyou need to configure snapshot controlfile,
source:
RAC BACKUP FAILS WITH ORA-00245: CONTROL FILE BACKUP OPERATION FAILED [ID 1268725.1]
RMAN Snapshot Controlfile Must Reside on Shared Device for RAC database [ID 1263621.1]
answered by CKPT
reference:-Re: ORA-00245 on alert_log.
also refer,
http://yichen-oracledba.blogspot.com/2011/02/11gr2-rac-backup-fails-with-ora-00245.html -
Unable to convert the file name in Target directory
Dear Experts,
Currently iam facing a problem with some files.my interface is a File to file .As per the interface the sender will pick the flatfiles from source directory which the file name was BNP_NE201.txt once my file reached to target directory the name of the file willrenamed as VENDOR_Payment.NE201 automatically for this they have done some OS level script in receiver communication channel of the first interface which we have added "un operating system command after message processing" in processing parameters tab.again one more sender comm channel wil pick the file from first target directory which is having naming convesion of "VENDOR_Payment.NE201 " and post it to target. all the two interfaces are file to file (NFS) . for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
from our side i check every thing .could you please suggest me the way to approch
Reagrs,
Kiran tanuku>> for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
You need to wait until the file is converted. After when it is converted then the second interface sender communication channel will pick the files.
What do u mean by unable to convert?
Is it unable to do the content conversion? if so then check the data as you said that it sometimes it works fine.
> The best approach is to change the name of the file in the receiver communciation channel instead of using a script.
Thanks, -
from Toad's home or whatever....I noted it's compatible with iPhoto 7 but will it back up the 7 library or 6? Do I even have a iPhoto 6 library if I'm now using iPhoto 7? -L
It will backup the database file from iPhoto 7 or 6. The file name is called Library6.iPhoto for both versions which can be confusing.
If you have your library named other than iPhoto Library or located other than in the Pictures folder you'll have to edit the Automator app as described in the Read Me file.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Local Files are deleted upon disconnecting from project
Running Version Cue CS3 3.1.0 with latest Bridge. (PowerMac G5 - OSX 10.4.11)
Im running the VC server on my local machine. Intention is for only myself to use it for version control.
I created a project, added my files... the standard local file path is ~/Documents/Version Cue/projectname
2 issues, perhaps the same issue
whenever i attempt to disconnect from the project... the local files are deleted...
so, if i had set a custom path for my projects local files, VC immediately deletes the files, and next time trying to connect, the local file path is reset to the ~/Documents/Version Cue/projectname
Is this how VC is supposed to function?
Any help or insight is greatly appreciated!!! Thank you in advanceRunning Version Cue CS3 3.1.0 with latest Bridge. (PowerMac G5 - OSX 10.4.11)
Im running the VC server on my local machine. Intention is for only myself to use it for version control.
I created a project, added my files... the standard local file path is ~/Documents/Version Cue/projectname
2 issues, perhaps the same issue
whenever i attempt to disconnect from the project... the local files are deleted...
so, if i had set a custom path for my projects local files, VC immediately deletes the files, and next time trying to connect, the local file path is reset to the ~/Documents/Version Cue/projectname
Is this how VC is supposed to function?
Any help or insight is greatly appreciated!!! Thank you in advance -
Hi All,
I want to access a local file from a JSP. On click of the link the local file should open. The location of the local file is
O:/VWS00000000000000000001/REPORT_FRAGMENTS/Title1.doc
and the hyper link on the JSP shows
file:///O:/VWS00000000000000000001/REPORT_FRAGMENTS/Title1.doc
somehow the file does not open from the JSP page but it opens from the browser if I type
'file:///O:/VWS00000000000000000001/REPORT_FRAGMENTS/Title1.doc' in the address bar.
Can anybody please help.
regards,
Shardul.if you'd like to show the real path to the user, use simply an ftp server !
however, if you prefer a secure solution, so use a servlet:
example:
import java.io.BufferedInputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SendWord extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
//get the 'file' parameter
String fileName = (String) request.getParameter("file");
if (fileName == null || fileName.equals(""))
throw new ServletException(
"Invalid or non-existent file parameter in SendWord servlet.");
// add the .doc suffix if it doesn't already exist
if (fileName.indexOf(".doc") == -1)
fileName = fileName + ".doc";
String wordDir = getServletContext().getInitParameter("word-dir");
if (wordDir == null || wordDir.equals(""))
throw new ServletException(
"Invalid or non-existent wordDir context-param.");
ServletOutputStream stream = null;
BufferedInputStream buf = null;
try {
stream = response.getOutputStream();
File doc = new File(wordDir + "/" + fileName);
response.setContentType("application/msword");
response.addHeader("Content-Disposition", "attachment; filename="
+ fileName);
response.setContentLength((int) doc.length());
FileInputStream input = new FileInputStream(doc);
buf = new BufferedInputStream(input);
int readBytes = 0;
while ((readBytes = buf.read()) != -1)
stream.write(readBytes);
} catch (IOException ioe) {
throw new ServletException(ioe.getMessage());
} finally {
if (stream != null)
stream.close();
if (buf != null)
buf.close();
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
doGet(request, response);
}hope that helps -
Local files not playing on Windows 8
If you've installed Windows 8 on your computer instead of the previous Windows 7, you may experience an issue where none of your local files will play.
First try reinstalling Spotify, installing Quicktime, deleting all the Local files and unchecking everything in Preferences related to Local Files. Finally, make sure the files are a supported file format.
We've also noticed that installing the Windows Media feature pack helped many users where the above suggestions did not. You can find the feature pack here:
http://support.microsoft.com/kb/2835517Hi,
If all you're missing is the required codec, there are plenty of free software offerings that will allow you to play DVDs - one example would be the application on the link below.
http://www.videolan.org/index.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Can I access local files?
I am writing an application using Adobe Air that will have to utilize and store media files locally on a user's computer. My marketing team now believes that a downloadable application that will be installed on a user's computer will be a dealbreaker for some users due to the fear of a virus, so now they are suggesting that we will have better sales numbers if people just need to log into a website to use the application. No problem, Air applications can be embedded into a website. But can an Air application embedded in a browser still store and manipulate files on a user's computer? Storing media files for a large number of individuals can become cost prohibitive, so rather than store them online, we would like to create a folder on a user's system to organize their files. Is this possible with a web-embedded Air application?
Thanks.AIR applications are always installed on the user's computer. You cannot run an AIR application on a website. On a web page, you can include a link to download or install an AIR application.
AIR applications can access local files.
Flash Player applications can also access local files, but the user first grants permission. For example, see the FileReference.load() and FileReference.save() methods (added in Flash Player 10):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html -
Hello everyone,First of all. I'm hoping I'm posting this in the right section since this is my first forum post here. I'm using Spotify for quite a while now and I love it, only this issue has given me many headaches over the past month.I Googled and searched on this forum for people having the same issue, and tried the answers given there. Sadly it hasn't fixed it for me just yet. My issue is that my Local files won't autoplay.This means everytime a local file is next in the playlist, I have to click next song > last played song for it to work. This is okay at first but now it has been going on for quite a bit that I'm getting pretty sick of it. At first everything worked fine untill one moment. Then it stopped working and thought it would be an issue in Spotify and I should just wait for next patch/update since this happened to my Android app earlier.Sadly this wasn't the case and after a bit of searching I found a topic saying the fraunhofer codec could fix the issue.After trying that, sadly still no result. Then I went on and installed the K-Lite codec pack and using the 'fix broken codec' option.But sadly, still no good result.The local files play, but they won't autoplay. So basically when a song ends and a local file is next in line, I have to press next song > previous song everytime. The name of the next song will pop up, but no time will show and the 'bar' will be at the end of the track (where it left off with the previous track) as you can see here: PictureHere the "Ghost Assassin VIP" is a local file and the 'progress bar' still shows from the song that was playing previously. I tried this on different playlists with different files, unlinking files, with both the fraunhofer and K-Lite codecs and with a clean install of both Spotify and the K-Lite codec pack (first spotify without the codec pack, then codec pack afterwards).Maybe good to mention I'm running WIndows 8.1 Pro x64 and Spotify 1.0.6.80.g2a801a53. I don't have a clue what I can try otherwise. Any help or suggestions are truly appreciated. With kind regards,Dennis
Pretty dissapointed that there is no response whatsoever.The issue still persists and it's really bugging me. I have a Premium membership and it's a huge shame I can't use the program to it's full functionality without issues like this.This used to happen before, but an update fixed it. But this time it's back and the updates I received in the past 4 weeks haven't fixed it yet..
-
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
Backup Error ORA-12640: Authentication adapter initialization failed
Dear All,
I have scheduled full backup from DB13 and it ends up in error. The error log is attached below.
BR0204I Percentage done: 100.00%, estimated end time: 20:12
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-06-03 20.12.52
BR0317I 'Alter tablespace SYSTEM end backup' successful
BR0280I BRBACKUP time stamp: 2009-06-03 20.12.56
BR0530I Cataloging backups of all database files...
BR0278E Command output of 'E:\oracle\SID\102\BIN\rman nocatalog':
Recovery Manager: Release 10.2.0.2.0 - Production on Wed Jun 3 20:12:57 200
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12640: Authentication adapter initialization failed
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 06/03/2009 20:12:58
RMAN-06171: not connected to target database
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2009-06-03 20.12.58
BR0279E Return code from 'E:\oracle\SID\102\BIN\rman nocatalog': 1
BR0536E RMAN call for database instance DEV failed
BR0280I BRBACKUP time stamp: 2009-06-03 20.12.58
BR0532E Cataloging backups of all database files failed
BR0056I End of database backup: beasixaz.fnd 2009-06-03 20.12.58
BR0280I BRBACKUP time stamp: 2009-06-03 20.12.58
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2009-06-03 20.12.58
I have tried upgrading Brtools as per suggestion from SAP but in vain. All the services run under administrator account but still no luck. The backup device type is disk
Kindly help on the same
Regards,
AnandHello Vedival.
I am getting exact same error.
We are using Tivoli with BRTOOLS and no RMAN at all..not sure why at the end of Backup its executing "'SHELL=/bin/sh /oracle/QAS/102_64/bin/rman nocatalog'" command.
I will appreciate your help.
Thanks
Laxmichand.
BR0530I Cataloging backups of all database files...
BR0278E Command output of 'SHELL=/bin/sh /oracle/QAS/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.2.0 - Production on Fri Oct 8 01:23:12 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04002: ocipi failed, ORA 1
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28> 29> 30>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 10/08/2010 01:23:15
RMAN-06171: not connected to target database
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2010-10-08 01.23.15
BR0279E Return code from 'SHELL=/bin/sh /oracle/QAS/102_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance QAS failed
BR0280I BRBACKUP time stamp: 2010-10-08 01.23.15
BR0532E Cataloging backups of all database files failed
BR0280I BRBACKUP time stamp: 2010-10-08 01.23.40
BR0317I 'Alter database end backup' successful
BR0056I End of database backup: beehfpbh.fnf 2010-10-08 01.23.15
BR0280I BRBACKUP time stamp: 2010-10-08 01.23.41 -
ORA-01122: database file 30 failed verification check
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Feb 13 20:33:13 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
when starting the DB for 10gAS get following error, db is started but cannot sign in
SQL> SQL> Connected.
SQL> ALTER DATABASE open
ERROR at line 1:
ORA-01122: database file 30 failed verification check
ORA-01110: data file 30: 'D:\ORACLE\ORADATA\PRT\APPS003_A.DBF'
ORA-01203: wrong incarnation of this file - wrong creation SCN
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining optionsYou have a mismatch in the control file and data file scn numbers. What was done before the database was getting started? I once saw this error when some one moved one file from another munt point to another and there was no rename give to the control file and the control file got no idea which is this new file and where it had come from?
Try finding the control file which is of the same backup as of this datafile.
Aman.... -
ORA-01122: database file 8 failed verification check
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 29 17:57:51 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2816
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2816) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064
M DpShMCreate: sizeof(file_adm) 208064 (72)
M DpShMCreate: sizeof(vmc_adm) 18720 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08750040, size: 4880152)
M DpShMCreate: allocated sys_adm at 08750040
M DpShMCreate: allocated wp_adm at 08751E40
M DpShMCreate: allocated tm_adm_list at 087565C0
M DpShMCreate: allocated tm_adm at 087565F0
M DpShMCreate: allocated wp_ca_adm at 08B25890
M DpShMCreate: allocated appc_ca_adm at 08B2B650
M DpShMCreate: allocated comm_adm at 08B2D590
M DpShMCreate: allocated file_adm at 08BAE450
M DpShMCreate: allocated vmc_adm_list at 08BE1110
M DpShMCreate: allocated gw_adm at 08BE1150
M DpShMCreate: allocated vmc_adm at 08BE1180
M DpShMCreate: allocated ca_info at 08BE5AA0
M DpShMCreate: allocated wall_adm at 08BE5AA8
M DpSesCreateTable: attached session table at 06440040 (len=138424)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Tue Apr 29 17:57:52 2014
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcInit2: o.k.
M
M Tue Apr 29 17:57:53 2014
M ThInit: running on host sapecc6
M
M Tue Apr 29 17:57:54 2014
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Attaching to DB Server DEV (con_hdl=0,svchp=06C39078,svrhp=06C4A944)
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C
C Tue Apr 29 17:57:55 2014
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06C39078,usrhp=06C979A8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on SAPECC6 with ORACLE version 10.2.0.2.0 since 20140429
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20140429 175754 SAPECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
M ThVmcSetParam: switch vmcj/vm_auto_restart 0 -> 0 sec
J
J Tue Apr 29 17:57:57 2014
J extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:2756)
J extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:2587)
J extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:2624)
J extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:2643)
J extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:1941)
J extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2019)
J extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2070)
J extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2097)
J extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2124)
J extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2149)
J extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:2662)
J extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:2688)
J extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:2833)
J extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:2845)
J extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:2857)
J extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:2902)
J extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:2914)
J extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:2926)
J extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:2710)
J extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1410)
J extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1437)
J extGetPid is set to disp+work.ThJGetPid(thxxjava.c:7663)
J extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1178)
J extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1190)
J extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1202)
J extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6095)
J extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6065)
J extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:545)
J extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:551)
J extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:641)
J extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:665)
J extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:685)
J extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:780)
J extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:853)
J extMtxForceUnlock is set to disp+work.ThJMtxForceUnlock(thxxvmemu.c:928)
J extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:975)
J extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:981)
J extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1013)
J extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1046)
J extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1101)
J extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
J extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
J extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
J extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
J extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
J extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
J extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
J extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
J extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
J extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
J extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
J extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
J extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
J extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
J extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
J extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
J extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
J extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:798)
J extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1147)
J extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1569)
J extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:985)
J extConnect is set to disp+work.ThSoConnect(thxxsock.c:809)
J extBind is set to disp+work.ThSoBind(thxxsock.c:1804)
J extAccept is set to disp+work.ThSoAccept(thxxsock.c:1985)
J extListen is set to disp+work.ThSoListen(thxxsock.c:2230)
J extPoll is set to disp+work.ThSoPoll(thxxsock.c:2381)
J extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2633)
J extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2787)
J extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:2963)
J extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3122)
J extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3305)
J extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3464)
J extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3099)
J extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3113)
J extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6147)
J extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:7500)
J extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:7508)
J extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:7513)
J extAlarm is set to disp+work.ThJAlarm(thxxjava.c:6215)
J setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:6386)
J getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:6374)
J getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2002)
J getWpNoHook is set to disp+work.DpWpAdmEntry(dpxxtool.c:3215)
J getVmCount is set to disp+work.ThJGetVmcCount(thxxjava.c:3154)
J getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1099)
J selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:335)
J rollOut is set to disp+work.ThJRollOut(thxxjava.c:5737)
J sleepFunc is set to disp+work.ThJSleep(thxxjava.c:6901)
J selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:7292)
J proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:7610)
J extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:7423)
J getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:7675)
J getVmType is set to disp+work.ThJGetVmType(thxxjava.c:7687)
J getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3049)
J getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:9681)
J isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3075)
J getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3059)
J createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3084)
J statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:7830)
J openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:7852)
J closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:7868)
J intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:7885)
J extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3129)
J extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:6250)
J extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3150)
J extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:6264)
J extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:6276)
J extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:2500)
J extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:6288)
J extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:6309)
J extCheckForCleanup is set to <null>
J extJvmxInit2 is set to <null>
J extJvmxCleanup is set to <null>
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
I
I Tue Apr 29 17:58:05 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0BD30040, size: 4400000)
M SHM_ROLL_AREA (addr: 59250040, size: 61440000)
M SHM_PAGING_AREA (addr: 0C7D0040, size: 32768000)
M SHM_ROLL_ADM (addr: 0C170040, size: 615040)
M SHM_PAGING_ADM (addr: 0C210040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C2A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0C330040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C
C Tue Apr 29 17:58:06 2014
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06C51FC0
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05637578,vda_p=06C5DB68
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BYL=> DBQ action required because of database error [dbsh#2 @ 1100] [dbsh 1100 ]
B SQL code: 376, SQL text: ORA-00376: file 8 cannot be read at this time
B ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5'
B ***LOG BY4=> sql error 376 performing SEL on table DDNTT [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2047]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1494]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapecc6_DEV_00 on host sapecc6 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Tue Apr 29 17:58:06 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2816) [dpnttool.c 327]
sql>select status from v$datafile;
status
One of my datafile status is 'RECOVER'
SQL>recover datafile 8;
ora_00283 recover session cancelled due to errors
ora_01110:datafile 8:'d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Please give me the suggestion..
Best regards
naniHi K Nani,
From your error message
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Looks like Data file is corrupted.
You may refer SAP note 696141 - Composite SAP Note: ORA-01122
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
Otherwise: Restore/recovery
Only solution here is restore the database from backup.
Alternate solution If it is a non-production system.
If the file is corrupted, then take the datafile offline and open the database.
Hope this helps
Regards,
Deepak Kori
Maybe you are looking for
-
Background color change for XML Template
Hi All, We have created a xml template for creation of news using xml form builder. When we are creating a news by using this template the background color of the news always shows SAP default color (light blue) for both Renderlist and Show forms. Ou
-
[SOLVED] Need help identifying a CLI program in a screenshot
I've seen this kind of a thing in a few screenshots around the web. In this particular screenshot it's running in the terminal in the lower left corner. GNU screen with a badass config..? If it really is screen, could someone point me to a config lik
-
Display Hint after 3 incorrect clicks
I have recorded a training simulation and very much enjoy the "Hints" which are displayed when you rollover a click box. However, I would like to know how you can automatically display the hint after 3 incorrect clicks (or clicks outside of the click
-
Hi all, has anyone found a reproducable process for a clean install of: - Oracle Database 10g Express - SOA Suite 10.1.3.1, advanced install (as required by Service Registry) - OracleAS Service Registry 10.1.3.1, standalone all on a single Win XP mac
-
Kinect V2 Sensor for windows shutting down automatically
hi there, Just want to ask if this a problem with hardware or my laptop. I am testing it with Kinect V2 Configuration verifier. The video stram hangs every couple of seconds. Seems like it is restarting ( the light keep turning on and off automatica