Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

Similar Messages

  • HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone  and it did not work and now my Ipad is disabled

    I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I  tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

    I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
    I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

  • I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

    I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

    You're talking about the dock?
    To check on that, go to System Preferences > Dock > indicate your preference.
    I can get iTunes up, and safari, but i don't know how
    Not sure what you mean - if you can "get it up" - does that mean you can launch it? What do you not know?

  • I have inserted a disc in my remote disc and it is not working and even i am trying to eject the disc but it is not working ? what to do ?

    i have inserted a disc in my remote disc and it is not working and even i am trying to eject the disc but it is not working ? what to do ?

    Would you rather upgrade to windows 8, BlackBerry or Android phones? Do you honestly think those don't have problems?
    You waited a lot and chose to buy an early production model. Mistakes happen all the time a factory retools and workers relearn new skills necessary to keep US happy.
    Exercise your rights.... Send it back for a new one. 
    In any case, I feel your frustration. Btw, I love Apple but use a Blackberry

  • How do I activate Acrobat XPro- I've installed CS6 Premium on my new computer and Acrobat does not work and says its not activated. How do I resolve this problem?????

    How do I activate Acrobat XPro- I've installed CS6 Premium on my computer and Acrobat does not work and says its not activated. It is listed on the programs on the computer but will not respond. How do I fix this?????? Help Adobe?????

    Hi t0m#2410,
    How did you install Acrobat, did you install it as a part of Suite installation.
    If it is a part of suite then deactivate suite uninstall Acrobat, Reinstall Acrobat using Suite media. Launch Photoshop first and Activate.
    Then try launch Acrobat.
    Regards,
    Ajlan Huda.

  • My iPod touch 4g's screen cracked and tried to replace it by myself and it's not working and I was wondering if apple will repair it ?

    My iPod touch 4g's screen cracked and tried to replace it by myself and it's not working and I was wondering if apple will repair it ?

    Apple may or may not exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price      
    Make an appointment at the Genius Bar of an Apple store and find out.
    Apple Retail Store - Genius Bar          

  • Power button and home button not working and dont have warranty

    power button and home button not working and dont have warranty

    I had the same problem went to a store and paid $80 to have them replace the cable and it works fine now.

  • My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!

    My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!!

    Those are hardware issues. You can try all of the software troubleshooting if you want. Restart, reset, restore from backup, restore as new. If that does not work, then your only option is to pay someone for something. The decision is up to you, but I've provided the options.

  • ITunes organizing music does not work and deletes my files

    When I have checked box nex to where it said something like : keed folder organized, scince i have so much music, it decided to move my music into compilations folder it had created by itself. After wards i was moving files from compilations folder to artist music belonged to. Little while later it decided to move all my music to the trash. And scince trash doesn't hold everything, it deleted 95% of my music. iTunes decides also to create and decide where to put music by itself, moves half to under artist name half somewhere else. Just to let apple people know, next time I'll get an mp3 player, but rather go with Zune or something, so I wouldn't have to use iTunes

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • IPad (3rd gen.) speaker and microphone suddenly not working and iPad freezes. Help!

    I was just watching some YouTube videos on my iPad and noticed that it only had 5% battery left. I plugged it in for charging and continued to watch. After that video had ended I moved onto another one, only to notice that I had no sound. I thought this was just because of low battery, and left it to charge. I came back to the iPad later on, only to find the display not turning on from the home or lock button. I did a reset by holding the home and lock buttons down for around 10 seconds. I showed the Apple logo and turned on. I still had no sound though. I tried using Siri to see if he would sound, but then noticed that my microphone is also not working, and then my iPad froze, and it has continued to freeze in a variety of different locations on the iPad since.
    When I attempt to play I sound, I hear a quiet, static-like sound coming from the speaker, as if it is attempting to play it or something. I tried an iPad restore using iTunes but it would not take place, so I erased all data on the iPad and that had no effect. Most times to turn the display I have to reset the iPad also.
    Please help!
    Thanks,
    Tom

    You rebooted - by which you mean powered off, then powered on?
    Then try a reset:
    Hold both the Home button and the Power button down for about 10 seconds until the Apple logo appears.
    Let go promptly when it appears.
    Wait 30 seconds or so for your iPad to restart.
    No information or settings will be lost.

  • Wmii newbie: mod-p and mod-a not working, and keyboard layout change

    like topic says... i have issues with mod-p and mod-a not working (they dont' display anything at all...)
    also: how do i change the keyboard layout in wmii?
    sorry for asking all of this, but was just trying to run wmii in hum, i guess 1 hour? i really do like it, but i cannot find any help nor hint on the official page or the man page...

    this is my actual wmiirc_local
    MODKEY=Mod4
    EXPORT WMII_FOCUSCOLORS=('#ff7700' '#111111' '#ff7700')
    EXPORT WMII_BACKGROUND='#333333'
    EXPORT WMII_NORMCOLORS=('#000000' '#ffffff' '#666666')
    EXPORT WMII_FONT='-*-*-*-*-*-*-12-*-*-*-*-*-*-*'
    EXPORT WMII_TERM="terminal"
    EXPORT status() {
    echo -n ' Eth0:' $(iwconfig eth0 | sed 's/ /\n/g' | grep Quality) '|' $(acpi -b | sed 's/.*, \{0,2\}\([0-9]\{1,3\}%\),.*/Bat: \1 | /') ' Core MHz:' $(cat /proc/cpuinfo | grep 'cpu MHz' | sed 's/.*: //g; s/\..*//g;') '|' $(uptime |sed 's/.*://; s/,//g') '|' $(date)
    and it's still not working, except for modkey. when i was using wmii instead of wmii-hg, this file worked fine... sigh
    Last edited by samuele.mattiuzzo (2010-01-21 11:21:53)

  • New iphone 6, never been dropped or water damage. suddenly does not charge with any chargers. I have the verified apple charger and it does not work, have tried 3 others and still doesnt work. phone is now dead. wont charge, whats wrong?

    I have a new iphone 6 (64 Gb) that i have had for roughly 2 weeks. Last night i plugged in my charger that came in the box with the phone and plugged it into an outlet that is not used for anything else. My phone suddenly stopped charging and gave me the message that the accessory is not supported. The box of the charger seemed hot at the time. Thinking it was a faulty cord, i borrowed a friends charger today (also the original apple charger) and it would not charge and gave me the same message. I tried three more chargers and still no charge and i got the same message every single time. My phone is now dead and will not turn on. Can someone explain what is wrong? And if i am going to need a new phone and if warranty should cover it since it was not user caused damage

    warranty will cover it. Did you try only by changing the power adapter or did you change both cable and power adapter?
    if you did the latter, see this page: https://www.apple.com/support/iphone/repair/battery-power/
    you'll be able to contact Apple Support from there.

  • IPhone volume not working and showing "Headphones"

    When I try to change the volume on my iPhone it shows "Headphones" even if they're not plugged or connected via Bluetooth (I'm sure there's nothing connected) and behaves accordingly (e. g. playing audio only when there is a phone call). With headphones plugged in it works fine, playing normal audio on the headphones and phone call ringtone on the headphones and on the iPhone speaker.
    I'm noticing this since I opened a game called "Dark Echo", that I've played only with headphones, without using headphones. The game says in the title screen "Headphones recommended". I don't know if this is the cause. I'm also pretty sure it isn't a hardware problem caused by dropping food or liquids on the headphone jack because the area around the jack is clean.
    I tried restarting the phone, deleting the game, reinstalling the game, cleaning the jack gently with a microfiber cloth, plugging and unplugging headphones, blowing in the jack, playing media and changing the sounds and music settings.
    My hypotheses are that it is an iOS 8.2 problem, a problem of the game or a hardware problem.
    Is anyone else experiencing this issue and how can I resolve it?

    I resolved this issue by cleaning the jack with a microfiber cloth, blowing and plugging and unplughing headphones again.

  • My personal hotspot is showing discoverable but not working.

    I can see that my personal hotspot is available in settings but it will not connect to anything

    Does your plan with your cell provider allow this?  Just because the option is there does not mean it will work if your plan does not support it.

  • FCP X 10.0.6 -- Preview in "Sound and Music" tab not working

    All my folders (like Final Cut Pro Sound Effects and iLife Sound Effects and so on) show up correctly in the "Sound and Music" section, but I can't preview the files inside any more - neither by hitting the space bar nor by pushing the Play button in the lower left corner. Sounds play correctly, though, when I drag them to the timeline or to the browser.
    Deleted all preferences (PrefsManager by Digital Rebellion), deleted all QuickLook preferences and did all the usual maintanance routines - to no avail.
    Anything else I could try? (MBP Retina, ML 10.8.2)

    Hallo Maikell
    Ich verzweifel langsam...
    Ich hab den PrefsManager von Digital Rebellion schon länger. Das war das erste was ich probiert habe.
    Die Prefs hab ich nun bereits mehrfach gelöscht. Auch von Hand FCPX deinstalliert, nach Anleitung von Apple:
    Final Cut Pro X entfernen
    Befolgen Sie die unten beschriebenen Schritte für die von Ihnen verwendete Version von Mac OS X.
    OS X 10.8 Mountain Lion
    Wählen Sie im Finder im Menü "Gehe zu" die Option "Programme".
    Suchen Sie das Programm Final Cut Pro und ziehen Sie es in den Papierkorb.
    Halten Sie im Finder die Wahltaste gedrückt und wählen Sie im Menü "Gehe zu" die Option "Library".
    Öffnen Sie im Ordner "Library", der sich nun öffnet, den Ordner "Application Support". Bewegen Sie den Ordner "Final Cut Pro" und den Ordner "Apple Qmaster" in den Papierkorb.
    Kehren Sie zum Ordner "Library" zurück und öffnen Sie den Ordner "Caches". Ziehen Sie den Ordner "com.apple.FinalCut" in den Papierkorb.
    Kehren Sie zum Ordner "Library" zurück und öffnen Sie den Ordner "Preferences". Bewegen Sie die folgenden Dateien in den Papierkorb:
    com.apple.FinalCut.LSSharedFileList.plist
    com.apple.FinalCut.LSSharedFileList.plist.lockfile 
    com.apple.FinalCut.plist
    com.apple.FinalCut.plist.lockfile
    Hinweis: Die Objekte ".lockfile" sind auf Ihrem System möglicherweise nicht vorhanden.
    FCPX hab ich nun bereits 2x deinstalliert und wieder installiert. Die Mac OSX 10.8.2 Kombi installiert und die HD Permissons über Festplatten Manager reparieren lassen.Die Quicklook Prefs auch gelöscht.
    Langsam weiss ich nicht weiter, trotzdem danke für deine Hilfe.
    PS: Hat denn kein Apple Operator der sich mit der Materie auskennt eine Idee.
    vg Klaus
    leicht gefrustet....

Maybe you are looking for

  • Installation impossible adobe 1ére éléments 10

    Après un petit problème sur mon ordinateur je viens de désinstaller Adobe 1ére éléments 10 qui fonctionnait correctement mais il m'est totalement impossible de le réinstaller, le DVD reste sans effet ? j'ai vérifié la fiabilité de mon lecteur DVD qui

  • Rac resource status is unknown only vip and asm is running fine

    i have just install oracle 10g clusterware and oracle software on RHEL 5 only asm and vip is working fine ..rest of the resource not working status is unknown [oracle@rac1 bin]$ ./crs_stat -t Name Type Target State Host ora....SM1.asm application ONL

  • Acrobat Pro 8 crashes just after launch

    I apologize if this has been asked before, I looked and couldn't find it listed anywhere. Two weeks ago the hard drive in my Intel iMac crashed hard, and now I've had to reinstall all of my software on a new drive. Everything is working fine, except

  • Cannot get my Flash file to play on my website - pls help!

    If you go to the website: www.rileyforjustice.com you should see my problem.  The white square is my embedded flash swf file, but as you can see it isn't playing.  In Flash, when I test the movie, it plays beautifully.  When I put it on my webpage, i

  • Person responsible attribute- service notification object type

    Hi All, I've extended BUS2080 (ZBUS2080)- service notification. I would like to add an attribute- the responsible person for processing the notification (partner function 'VW'). I used CALL FUNCTION 'QQWF_RESPONSIBLE_FOR_NOTIF' container-element = 'N