Possible to add affiliate banners/links?

Hi all, is it al all possible to add banners etc., for affiliate links to, say, the Apple Store?
I would like to set up a basic page for my local club and to include some links for the odd bit of funding but all of the banners I see contain HTML that you need to put behind a banner etc., so is it possible? I have searched and played around but no luck so far.
Mnay thanks in advance
Michael

OK, answering my own question now - albeit a part of it! I have played around a bit and find that I can import an image and add a hyperlink to a static picture. My problems above seem to be related to the fact that the apple affiliate banners are annimated gif's. The gif's play fine on a page uploaded via iWeb but I can't find any way to add a hyerlink so that the viewer can click and go through the Apple store.
Any help would be great.
Many thanks
Michael

Similar Messages

Is it possible to add a clickable link to the presentation area of a category

Is it possible to add a clickable link to the presentation area of a category
Websphere 61
Oracle 10g
RequestCenter 2008.3 SP4
Ie 6
Hi:
I am trying to add a clickable link to open a web page. I would like it to be visible on the presentation area (top) of the "Consumer Service Catalog". I can make the button, but when clicked nothing happens. I have tried several of the button commands like onclick, but then I get a js error.
Thank you
Daniel
Safeway Inc.

Yes. You can use html tags in the presentation area ot the <b>Consumer Services</b> display category

In SharePoint 2013 navigation, is it possible to add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

If I want to add a custom link to the left-hand navigation menu In a SharePoint 2013 sub-site, it can be done by visiting
Site Settings à Navigation section and adding the link under
Structural Navigation: Editing and Sorting section. However, this will automatically add a matching link to the top menu as a dropdown.
(Note that Global Navigation is set to “Display the same navigation items as the parent site” where “Parent is using Structural Navigation.” and Current Navigation is set to “Structural Navigation:
Display only the navigation items below the current site”)
Is there a way to just add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

Hi Asanka,
Please refer the below link which may help you to resolve your problem.
http://blog.navantis.com/configuring-sharepoint-2013-navigation-to-span-site-collections/
If its not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Is it possible to add a custom link to a smart navigation menu?

I want to create a dynamic menu in Muse but also have a link to a store offsite. Is it possible to do this with the menu widget or do I have to style each menu item individually?

Yes you can,
The link below gives you instructions on how to do it.
http://forums.adobe.com/thread/1000851

Add a URL link to an area menu (SE43)

Does anybody know an possibility to add a URL link to an area menu in SE43?
Best Regards
A.B.

Hi.,
As far I know it is not possible to create URL link in Area Menu., instead, Create a Report and call Function 'CALL_BROWSER' and pass the url to the function module.
Now create a Transaction for this report let say ZURL,
Now Assign this transaction to Area Menu So., When you click that transaction in Area menu it will open Url in browser.
hope this helps u.,
Thanks & Regards,
Kiran

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

As it's a feature asked several times, maybe it will be available in the next version.
I don't know features available in Excel.
Sometimes ago I posted an AppleScript which may perhaps fit your needs.
If you insert in a table pathnames of files stored in your HD, select the cell, trigger the script, open the file.
Here is an updated version :
--[SCRIPT open_a_file]
Enregistrer le script en tant que Script : open_a_file.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Library:Scripts:Applications:Numb ers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la cellule contenant le chemin d'accès
Aller au menu Scripts , choisir Numbers puis choisir “open_a_file”
ouvre le fichier.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: open_a_file.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select the cell containing the pathname
Go to the Scripts Menu, choose Numbers, then choose “open_a_file”
open the file
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/02/02
2011/04/28 - replaced the getSelParams handler by the get_SelParams one
--=====
on run
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set maybe to value of cell rowNum1 of column colNum1
          end tell -- Numbers
          tell application "Finder" to open maybe
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on decoupe(t, d)
          local l
          set AppleScript's text item delimiters to d
          set l to text items of t
          set AppleScript's text item delimiters to ""
          return l
end decoupe
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Oops, I forgot that you are asking about Numbers '08 which hasn't AppleScript support.
Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 16:26:39
Please :
Search for questions similar to your own before submitting them to the community

Is it possible to add new columns with format "Text" once a table is linked to a form

Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps!

Is it possible to add pic/diagram to SP file with link to another SP file?

Hi,
Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file
so that, when the diagram/table in the source SP file updates, my SP file also updates accordingly.
For example:
Instead of:
       The diagram is located in:
       link
I would ideally like:
       Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
       The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
       file will only contain a diagram, picture, or table)
Any suggestions are welcome.
Thank you very much.

Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file so that,
when the diagram/table in the source SP file updates, my SP file also updates accordingly.
For example:
Instead of:
       The diagram is located in:
       link
I would ideally like:
       Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
       The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
       file will only contain a diagram, picture, or table)
Any suggestions are welcome.
Thank you very much.

How to add a download link in a report directed by a navigation link?

I have searched the net but could not find the solution.
I added a link in a dashboard page. The link is connected to a request. When the link is clicked, the page goes to a report, which is not placed in a section region.
Now, how to configure the report so that a download link is displayed right under the navigated report?
I know that if a report is placed under a section in a dashboard design page, use the "Request Link..." to add the download link. But such a "Request Link..." feature is not available for a navigate-link directed report.
Many thanks in advance.
Quin

I haven't seen this done, but it may be possible. As a workaround why not create a new hidden dashboard page and put your request on that page with the appropriate 'Download' report link?

Is it possible to add more input values for a payroll element?

Hi All
I have created an element with 1 default input value 'pay value' and another input value '1xx1'. I have linked this to payroll and attached to many employees. Now due to business requirment, I need to add one more input value '2yy2' and also I need to change the formula. Eventhough its a minor change in formula, without a new input value it will not work. I tried to add a new one by datetracking to the element creation date without sucess.
Is it possible to add input values after saving an element?
Regards
Rahman

You can Change the Required Input Value to Not-required
Alter the Sequence of the Input Value to be displayed in the Element Entry Screen
You can Change the Input Value Validation Rule minimum, Maximum, Lookup and Formula
Change your specification of which input values create Database Items. Note, however, you cannot remove Database Items if they are used in any formulas or QuickPaint reports.
You cannot remove existing input values or add new one if you have created any entries for the element
For more details you can refer http://ramesh-oraclehrms.blogspot.com/2007/08/maintaining-element.html

Is it possible to add a second monitor via mac mini with iMac

Hi
is it possible to add a second monitor via mac mini with iMac
or is there another solution?
all i want to know is if i can run a second monitor or link a mac mini for more speed like i heard you can with the G5 Towers.

The iMac will allow you to connect a second monitor but that monitor will show the same thing as the iMac's built-in screen.
You can network a Mac mini and iMac via Ethernet or Firewire.
Software load sharing like Xgrid can allow you to share work between the Macs.

Is it possible to add a user using the RESTful Web Services SDK

Others have asked before about user management features in the RESTful Web Services SDK. However I can find no answers or links which provide an answer to the question 'Is it possible to add a user using the BI 4.1 SP2 RESTful Web Services SDK'?
Any help would be appreciated.
Regards,
Steve

Hi Steve
Unfortunately, not possible. The BI RESTful can only get "stuff" that is already there. I suppose this would fall under some sort of "Object Creation" API and that is not there. Yet. Rumors abound, but nothing firm. Just as a BTW.; the Business Intelligence platform RESTful Web Service Developer Guide 4.1 is here:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_bip_rest_ws_en.pdf
SAP Web Intelligence RESTful web service SDK User Guide, SAP BusinessObjects Business Intelligence platform 4.1
SAP Crystal Reports RESTful web services - SAP Crystal Reports RESTful web services
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Can I add a topic link to a desktop layout sidebar tab?

Hello,
I'm currently working in Robohelp 10 and using a modified version of the desktop layout. We don't need the Glossary tab in the sidebar, so I'd like to replace it with a Videos tab instead. I was able to add a new tab to the sidebar without a problem, but I'm having difficulty figuring out where to go from here. Ideally, when users click on Videos, I'd like it to launch one of our topics that already lists all our current videos and includes links to them. Is it possible to do this? Or is my only option to manually add the video links to that tab's section in the Topic.slp HTML? I'd like to avoid this if possible, since it would mean maintaining the videos list in multiple locations within the help project.
Thanks in advance,
Alison

The question is always how much time and effort you are willing to invest. The easy answer is that the tab in the sidebar does not load topics, or any other data for that matter. If you want this behaviour, you will have to create it yourself.
It is possible to create a script to load the list of video's from a predetermined location. But if you want to get it from a topic, the script will have to be interesting as it will require a lot of parsing the topic to get the relevant data. An easier solution would be to maintain an XML with links and descriptions and read that. I offer consultancy for building precisely these kinds of solutions. Please PM me if you want to know more.
Kind regards,
Willam

Is it possible to add automatic insertions in a RH 7 template?

I'm new to RoboHelp and to HTML altogether, but learning quickly. I'm developing a help system with both General help and How to's. I was wondering if it possible to add automatic insertions in a RoboHelp HTML 7 template, as you would in a Word .dot with macros, or if I need to repeat creating tables and numbered steps all the time.
Your support is greatly appreciated.

Hi again
Okay, clearer now what you need to accomplish.
You could take a couple of approaches.
Approach one - Create a topic and define a table. Configure as you would like to see it. Then when you need it, you open the topic containing the table, copy it and paste it where you need to use it.
Approach two - Create a Table Template. Instructions for this are found on fellow Adobe Community Expert Peter Grainge's site at the link below.
Click here to visit Peter's site
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Possible to add affiliate banners/links?

Similar Messages

Maybe you are looking for