Problem in starting SAP and DB2
Hi ,
I am facing problem in starting SAP,
I have installed the NW7.0 with DB2 trial version on SUSE LINUX Enterprise Server 10 SP2.
When I try start the SAP , It gives me the error
Why do I receive the error, "SQL6048N A communication error occurred during START or STOP DATABASE MANAGER processing." ?
Please can any one help me.
Thanks,
Sridhar
Dear Sridhar,
A TCP/IP communication error occurred while the START or STOP DATABASE MANAGER command was trying to establish connection with all the nodes defined in the sqllib/db2nodes.cfg configuration file.
possible solutions to fix SQL6048N:
Ensure that the node has the proper authorization defined in the .rhosts or the host.equiv files.
Ensure that the application is not using more than (500 + (1995 - 2 * total_number_of_nodes)) file descriptors at the same time.
Ensure all the Enterprise Server Edition environment variables are defined in the profile file.
Ensure the profile file is written in the Korn Shell script format.
Ensure that all the host names defined in the db2nodes.cfg file in the sqllib directory are defined on the network and are running.
For my case, itu2019s as simple as updating the hostname information defined in sqllib/db2nodes.cfg configuration file!
The db2start command rocks again after updating the hostname information!
If youu2019ve the same DB2 SQL6048N error code when starting DB2 Instance processes with db2start command, confirm the hostname in sqllib/db2nodes.cfg is correct, especially after changing Linux networking information, such as the server hostname!
Definetely it will work when you update the host information in sqllib/db2nodes.cfg.
Please let me know if you have still issues.
Thanks
Kishore
Similar Messages
-
Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
Problem in starting SAP liveCache server
Hi,
I am getting the following error message when i tried to start SAP liveCache server with LC10.
"Restart of liveCache LC3 on saplc3cache terminated; reason: User LC3RFC has lock"
Message no. LVC072
Does anyone has idea! abt the error? why it comes and how it can be solved?
Thanks,
VenkatHi Christiane,
The startup procedure is not even reaching the lcinit script. There are absolutly no logs in knldiag and lcinit.log files. After little bit debugging I found the problem. But don't know how to solve it.
The problem occured when I was doing disrptive testing for the liveCache server.
When I kill ("KILL -9 PID") the liveCache server processes (<b>master first and then child</b>) there are some IPC resources hanging over there. These IPC resources (shared memory segments) holds some locks and are preventing the liveCache server to startup.
The problem is not happening when I kill child first and then master process (all the IPCs are getting removed in this case).
I am wondering whether SAP has any tool to remove these IPC resources for liveCache server uniquely for perticular liveCache server (something similar to cleanipc for SAP systems).
I can't write a script to remove all the IPC resources based on the user name ('sdb') which same for liveCache server and MaxDB. (Imagine a case where MaxDB(APO DB) and liveCache server are running together). Any other solutions?
Any answers/suggestions are most welcome.
Thanks,
Venkat -
Dear All,
I have a problem during the startup of my Quality server, the Oracle (10.2g) database is mounting, but while I start the SAP it is giving me this error.
hgquasrv:hqsadm 1> startsap
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
Checking HQS Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
open logfile '/usr/sap/tmp/dev_coll.tmp' failed... use stderri
12:24:12 14.08.2008 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
12:24:12 14.08.2008 ERROR: Make sure directory /usr/sap/tmp exists or specify D
IR_PERF
12:24:12 14.08.2008 ERROR: in profile and run saposcol pf=<profile>
saposcol already running
Running /usr/sap/HQS/SYS/exe/run/startdb
Trying to start HQS database ...
Log file: /home/hqsadm/startdb.log
HQS database started
/usr/sap/HQS/SYS/exe/run/startdb completed successfully
Starting SAP Instance DVEBMGS07
Startup-Log is written to /home/hqsadm/startsap_DVEBMGS07.log
Instance Service on host hgquasrv started
Startup of Instance failed
See /home/hqsadm/startsap_DVEBMGS07.log for details
hgquasrv:hqsadm 2>
Can any body help me in this regards.
Thanks in advance.
UdayaHi,
These files I can see in the directory :
ls -l
total 40
-rwxrwxrwx 1 hqsadm sapsys 2182 Jun 26 2007 DEFAULT.BAK
-rwxrwxrwx 1 hqsadm sapsys 2300 Jun 26 2007 DEFAULT.PFL
-rw-rw---- 1 hqsadm sapsys 6894 Aug 06 18:03 HQS_DVEBMGS07_hgquasrv.BAK
-rwxrwxrwx 1 hqsadm sapsys 3829 May 21 2007 START_DVEBMGS07_hgquasrv
drwxrwxrwx 2 hqsadm sapsys 256 May 20 2007 oracle
Best Regards
Udaya
Edited by: Uday Bhaskar on Aug 14, 2008 9:47 AM -
Problems to start SAP instance after reboot
Hello experts,
we are occuring a problem that we are not able to start our SAP instance after we applied some MS patches and rebooted the server. We also deinstalled these patches buzt this also did not help, so I guess the reason somewhere else.
We are running a SQL server 2000 on a Windows 2003 SP2 (32bit)
SAP kernel is 640 PL 304
The SQL server seems to operate normally, however when we try to start SAP via MMC the process disp+work fails (it's green for a few seconds, but then turn so grey).
In dev_w0 I can find this entry
C Mon Feb 22 12:35:18 2010
C OpenOledbConnection: line 23082. hr: 0x8000ffff [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 17, sev 10), [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 0, sev 10), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
I hope you have an idea to solve the issue soon.
Thanks a lot
PhilippHi,
yes I read this SAP note however when I try to install this patch
It fails with message "installation unsuccessful"
Reason ??
Check the following:
1. Status of SQLServer Service(s)?
2. Windows Event Log Entries?
What is the SP level of SQL Server 2000 ?
Also, Perform the Connectivity Test as per[ this link|http://support.microsoft.com/kb/827422/].
Regards,
Bhavik G. Shroff -
i am using windows xp pro on a laptop and have never had a problem accessing the internet, and still dont.
i purchased an iphone 4 and would like to sink it with my laptop, i installed itune 10.6 and it (itune) will not connest to the internet.
this can not be a hard problem to solve, but i need help
thanksClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Problem while starting SAP servers
Hi,
We had a SAP Nw2004 SPS9 installation on a AIX box.
WE ahd downlaoded the SPS20 to upgarde the server.
During the upgrade process the m/c got hang.
As a result i retsrated the m/c.
Now while starting the sap server using "startsap all"
It is waiting at the followign stage
Checking ADA db Database
I coudl see the following lines in the startsap_SCS01.log file
:$
(290996) Starting: local ms.sapCTS_SCS01 pf=/usr/sap/CTS/SYS/profile/CTS_SCS01_ctsaix05
(327904) Starting: local en.sapCTS_SCS01 pf=/usr/sap/CTS/SYS/profile/CTS_SCS01_ctsaix05
(184394) Waiting for Child Processes to terminate.
Instance on host ctsaix05 started
Starting SAP-Collector Daemon
saposcol already running
Running /usr/sap/CTS/SYS/exe/run/startdb
/usr/sap/CTS/SYS/exe/run/startdb completed successfully
Checking ADA db Database
~
It just hangs there
Best Regards
ManojHi Manoj,
Seems like the DB is not running... check the status of the database and try it again when the DB is online...
Also, check dev_w0 for errors...
Regards
Juan
Please reward with points if helpful -
Saving Data in SAP and DB2 database
Hi All,
I have an SAP application in which 10 fields are there for the user to enter. Out this 10 fields i need to save 5 fields in SAP database and another 5 in DB2 database.Please help me how to achieve this.
Regards
VEnk@Hi Jesse,
The Citadel database is not a relational database. It's highly optimized for storing lower-rate (non-waveform) channel-by-channel, or "trace" measurement data. Another option you can consider is using DSC and Citadel on the server then writing a utility to export the data from Citdael to an SQL database. --That would solve the problem of having to write a logger application from scratch. You would only have to write the relatively simple application to export the data from Citadel and import it into a relational database.
You could accomplish this two ways. First, DSC includes a set of VIs that will retrieve historical data from Ciatdel. You could use LabVIEW to parse this data and write it to a table in a relational database. Second, Citadel actually includes a locally accessible ODBC interface. (You can query Citadel using an SQL query from the local computer). You could query Citadel using this interface, then write the result to a table in a relational database.
To view Citadel in its native format or query a Citadel database using ODBC from a remote comptuer that comptuer would need to have a licensed DSC RTS installed.
~~ -
Problem with starting SAP Database ..
Hi,
I have a issue with starting the DB. the detailed log is attached below.
When I had a Performance issue, I had tried to stop the SAP instance and the DB.
But thats not stopped. So I have restarted the OS.
After restarting the OS the DB is not comming up.
Its throwing the following log
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Nov 15 13:11:16 2008
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2365587456 bytes
Fixed Size 2057952 bytes
Variable Size 1191184672 bytes
Database Buffers 1157627904 bytes
Redo Buffers 14716928 bytes
Database mounted.
ORA-16038: log 4 sequence# 3468 cannot be archived
ORA-19502: write error on file "", blockno (blocksize=)
ORA-00312: online log 4 thread 1: '/oracle/TRQ/origlogB/log_g14m1.dbf'
ORA-00312: online log 4 thread 1: '/oracle/TRQ/mirrlogB/log_g14m2.dbf'
Please give me an solution to solve this issue.
Thanx & Regards,
Kumar>ORA-16038: log 4 sequence# 3468 cannot be archived
the problem is your archive directory is full. take archive log backup or move old archive log files to another location.
follow Note 391 - Archiver stuck
Cheers,
-Sunil -
After restart system, cannot start sap (and connect via GUI)
We have installed Solution Manager 7.1 on linux64.
After the accident, and reboot the system , stops producing startsap. On the advice of specialists took over running the "startsap <virtualhost>"
At the command prompt , startsap_DVEBMGS00.log startsap.trc and indicated that the launch was successful .
However, neither in the list of processes to be seen dispatcher, or SAP GUI can not connect to the system.
In addition, there is an assumption that just does not start JAVA Instance.
In this regard, there are a number of questions for the esteemed colleagues :
1. on how the logs directory from which you can learn this starts the ABAP and JAVA stacks ?
2 . As can be verified directly from the server ( what commands ) kaktivnost / no system activity ?
3 . Which log files do I need to provide here , you so that you could possibly help me?Hi Michael,
You need to check the below things
1. Run R3trans -d to check whether sap can connect to DB or not.(it will create the trans.log file)
If return code is 0012 , then
There is some problem with Database
Else return code 0000
There is some problem with SAP.
2. Now go to the directory /usr/sap/<SID>/DVEBMGS<XX>/work
and check the log files
1. dev_w0
2. dev_disp
3. dev_ms
4. stderr<x> logs which alos content important system
Above logs are for ABAP system analysis.
For Java
3. std_server<x>.out
4. dev_server<x>
5. dev_dispatcher
Also check the default tarce and application log as well for java
With Regards
Ashutosh Chaturvedi -
This problem HAS happened before, maybe 1.5 yrs ago. While on a valid page a pop-up saying URL is invalid and can not be loaded appears. Frequency starts increasing in time. Then I can not load any of my bookmarked pages without re-starting my laptop. Has been getting worse since last FF update.
well after 4 days and no support help, I said screw it. Good bye FireFox, your excellent customer service on this issue drove me to install Google Chrome. Just like Opera's piss poor customer support drove me to FireFox, now Firefox is driving me elsewhere.
This issue is NOT AN ADD ON issue, nor THEME ISSUE, its a FIREFOX ISSUE, but their lack of a fix is inadequate for me. I hate the damn annoying pop up every time I open firefox so I will dump firefox and move on after 5 yrs. -
Please Advise on SAP and DB2 file system during installation
Dear Experts
SAP ERP 6.0 EHP5 ( AS ABAP and AS JAVA(EP))
DB2
RHEL 6
i have a requirment to install solution manager,development and production server, at present client is allocated below hardware for 3 servers and one MSA Storage
Landscape: Two system landscape
DEV Server: 2*300GB HDD 2cpu/32gb ram
PRD server: 2*300GB HDD 2cpu/32gb ram
solution manger: 2*300GB HDD 1cpu/16gb ram
MSA Storage HP P2000 G3 MSA 12*300Gb HDD
1 TAPE DEVICE
these three server should to connected to storage
Its my first time to work on this kind of landscape with SAN
Request to please provide me filesytems and mountpoint with size. However i am going through standardinst document & trying to understand...
Regards
RajuRAJU83 wrote:
> Request to please provide me filesytems and mountpoint with size. However i am going through standardinst document & trying to understand...
Better you continue with that and plan and document the file system and size strategy.
'SAP Sizing' is very important, utilize it - service.sap.com/sizing
After you understand the guides' advice and explore standard sizing, then share your queries with us.
This concept is very detailed one and really the 'subjective' one - depends case to case - customer to customer - ultimately the SIZING will help you - It can't be explained clearly in a discussion thread 'initially'
Thanks -
Problem in starting SAP server.
Currently our production system is down.we see that dispatcher is unable to conenct to the message server.
production is running on cluetr environment. when i login in clusadmin mmc i see saprd cluter group went to offline and unable to bring online.
Also we see sapprd_00 service is stopped and failed to start the service.
The SAPPRD_00 service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please see last 50 lines of dispatcher log.
Mon Jun 07 13:48:21 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 332
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:48:42 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 332
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:49:02 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 328
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:49:23 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 336
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:49:37 2010
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 5011]
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5131]
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 5011]
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 5011]
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5131]
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5131]
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 5011]
Mon Jun 07 13:49:43 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 332
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:50:03 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 332
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:50:23 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 328
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:50:44 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 336
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:50:52 2010
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 5011]
Mon Jun 07 13:51:04 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 336
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Mon Jun 07 13:51:24 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 336
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.201.20:3900) [nixxi.cpp 2823]
ERROR => MsIAttachEx: NiBufConnect to sapclusgrp/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Highly Appreciate your early response on this.
Regards,
VinodDear Vinod,
Just do the below things
-> ask your cluster admn to bring offline SAP instances & then thereafter your database as well.
-> After that goto usr folder where you find to folder namely ASCS** and SCS** ,In each of this folder there is a sapstartsrv.exe & sapstartsrv.exe.new.
-> Rename the sapstartsrv.exe to sapstartsrv.exe.old &
-> Rename the sapstartsrv.exe to sapstartsrv.exe
-> Now ask cluster administrator to bring the database online first then the SAP instances
-> check now whether your SAP will up or not this time.
Let us know if you find any other errors.
Thank You.
Kind Regards,
Rafikul Hussain -
How to start SAP and oracle on SUN SOLARIS SYSTEM
hi.
Please suggest
(Mistakenly we restarted the server when SAP is on and now SAP is not starting)
1. How to start the SAP ECC6 in sun Solaris.(version 10)
2.How to start the oracle in sun Solaris (version 10)
We are trying with
sh startsap SID
but it showing SAP SYSTEM NAME NOT FOUND
Please suggest'
Regards,Dear Ravindra,
First start oracle :
login as orasid and login to sqlplus "/as sysdba"
and then startup and make sure that listener is up and running.
For that you can lsnrctl status, if its not started just do lsnrctl start.
After that login as sidadm and then startsap R3
If still if you face any error like system name not found.
then try as startsap R3 <hostname> or startsap SID <hostname>
Defenitely it will resolves your issue.
Thanks
Kishore -
Problems by starting x and awesome
Hello,
for a few days, I'm now using arch with awesome as wm, but it's only possible and awesome by root, otherwise I get the following error:
W: awesome: a_dbus_init:387: D-Bus system bus connection failed: failed to connect to socket /temp/dbus-lgy9oSvBJa: Connection refused
process 2833: argument to dbus_bus_request_name() were incorrect, assertion "connection != NULL" failed in file dbus-bus.c line 1061.
But I have no idea how to deal with it. After two days searching for a solution to start awesome as normal user I haven't got the slightest clue.
Is there anybody, who can tell me, what my problem is and how I can solve it?I solved the problem by adding the following lines to the .xinitrc:
if which dbus-launch >/dev/null && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
eval `dbus-launch --sh-syntax --exit-with-session`
fi
Now I only have to find out, how I can use the firefox account, I used as root, as normal user.
Maybe you are looking for
-
Home sharing only available for a few minutes
Hello everyone, So I have a strange problem and I'll do my best to explain everything I've tried and my current setup. Origonal setup (Was working then just completely stopped) Windows Server 2008 (non R2) on an old computer (Currently offline)
-
WVC200 1.2.0 firmware - or is it?
Hmm, perhaps I should have left well enough alone. I've had my WVC200 working fine for a while - it emails on motion detection, and saves pics via FTP. But I moved it and thought I should check the web for updates. I got to the UK Linksys page at: ht
-
Dear all, I've come across an interesting JBuilder problem that is slightly different to the other ones I've seen on this forum when i searched Background: I've been making an address book program for my computer to help me learn java and up to now i
-
Modifying existing style selectors for selected components
Hi, We have changed default .AFNoteWindow,AFNoteWindowRight style class for one use case. But it is applying for other use cases also where we are showing user friendly messages. how we can avoid the applying style for other use cases? and these all
-
IPhoto 08 won't let me buy a book
I keep getting a message telling me that there are frames without photos, even though all frames and text boxes are full. Help - I need to order asap for Xmas.