Problem opening email with space in subject

I have a report region which displays the date, who sent and subject of emaisl from the users inbox. If they click on the subject then Outlook is meant to open and display the email in full.
This works ok for email with only one word in the subject but gives an error when there is more than one word.
I have tried replacing spaces with %20 but without any joy.
An example of the html link generated is "<a href="outlook:Inbox/~test%20subject>test subject</a>"
Has anyone done this sort of thing and got it to work?
Fintan.
Edited by: Fintan Stack on Dec 8, 2010 7:19 AM

Has anyone done this sort of thing and got it to work?No. Didn't even know that it was possible.
<a href="outlook:Inbox/~test%20subject>test subject</a>
{code}
Is that *exactly* how it appears in the HTML? If so, generating the link so the href attribute is properly terminated might help:
{code}
<a href="outlook:Inbox/~test%20subject">test subject</a>
{code}

Similar Messages

Having problem opening files with gradients in CS2

When I try to open an illustrator 9 file from CS2, I get "An unknown error has occurred." message. I believe this may be a CS2 problem because when I checked further, I discovered that only AI 9 files where the gradient feature was used were affected. Any suggestions would be appreciated.

Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
    Re: Problem opening files with Mac OS Mavericks and Elements
    created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem opening files with Mac OS Mavericks and Elements

I have recently installed Mac OS 10.9.x Mavericks. Since this I have had problems opening files in Elements 11. I upgraded to Elements 12, blindly hoping the problem would fix itself, however it hasn't.   When I try to open a file the Finder window pops up then disappears immediately. Occasionally it will stay open until I scroll down but then closes.   I keep the files on an external drive but the drive is working with all other applications, so I don't think it is that. If anyone has had a similar problem and has any ideas I would be grateful as the program is unusable for now. Thanks very much in anticipation

Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
    Re: Problem opening files with Mac OS Mavericks and Elements
    created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Deleting emails with a specific subject from a single user mailbox

we are exchange 2007 on SP1. we do not have an edge server, only a hub server.
A user mailbox was flooded with 11000 "Undeliverable:" emails in the last 2 days, the source being "DSA". I am still finding out why this has happened. As for now, I have set up a rule to silently drop all emails with this specific subject.
now the user wanted our team to delete all of these 11000 emails from his mailbox.
we gave the appropriate permission to the users mailbox by running the command
Get-Mailbox -Identity “[email protected]” | Add-MailboxPermission -User [email protected] -AccessRights FullAccess -InheritanceType all
Then I ran the below command
Get-Mailbox -Identity “[email protected]” | Export-Mailbox -SubjectKeywords "Undeliverable:" -IncludeFolders "\Inbox" -StartDate "09/22/2014" -EndDate "09/23/2014" -DeleteContent -Confirm:$false
The command ran for a while, showing it was deleting 19000 odd emails with the below summary
[PS] C:\Windows\System32>Get-Mailbox -Identity "[email protected]" | Export-Mailb
ox -SubjectKeywords "Undeliverable:" -IncludeFolders "\Inbox" -StartDate "09/22/
2014" -EndDate "09/23/2014" -DeleteContent -Confirm:$false
TargetMailbox :
TargetServer :
TargetDatabase :
MailboxSize : 733800KB
IsResourceMailbox : False
SIDUsedInMatch :
SMTPProxies :
SourceManager :
SourceDirectReports :
SourcePublicDelegates :
SourcePublicDelegatesBL :
SourceAltRecipient :
SourceAltRecipientBL :
SourceDeliverAndRedirect :
MatchedTargetNTAccountDN :
IsMatchedNTAccountMailboxEnabled :
MatchedContactsDNList :
TargetNTAccountDNToCreate :
TargetManager :
TargetDirectReports :
TargetPublicDelegates :
TargetPublicDelegatesBL :
TargetAltRecipient :
TargetAltRecipientBL :
TargetDeliverAndRedirect :
Options : DeleteSourceContent
SourceForestCredential :
TargetForestCredential :
TargetFolder :
PSTFilePath :
RsgMailboxGuid :
RsgMailboxLegacyExchangeDN :
RsgMailboxDisplayName :
RsgDatabaseGuid :
StandardMessagesDeleted : 0
AssociatedMessagesDeleted : 0
DumpsterMessagesDeleted : 19020
MoveType : DeleteOnly
MoveStage : Completed
StartTime : 9/23/2014 7:29:01 PM
EndTime : 9/23/2014 7:32:19 PM
StatusCode : 0
StatusMessage : Messages have been deleted from the source m
ailbox.
ReportFile : C:\Program Files\Microsoft\Exchange Server\L
ogging\MigrationLogs\export-Mailbox20140923-
192900-8103154.xml
However, when I open the user's mailbox all of the emails still exist. kindly help me understand where I am going wrong and how I can delete all these emails.
Thank You
Philip

Are they still specifically in the Inbox?
I was thinking that the account might have "Deny" permissions to the user's mailbox but it looks like it can access the mailbox and delete items.
StandardMessagesDeleted          : 0
AssociatedMessagesDeleted        : 0
DumpsterMessagesDeleted         : 19020
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Problems sending emails with iPhone 3G and outlook exchange

I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
Any help much appreciated

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Mail hangs when I try to open emails with certain attachments

When I try to open emails with certain attachments, rather PS files (if I recall correctly) it hangs. It seems that Mail is trying to load the PS file for me, and maybe convert it to PDF, which take awful lot of time.
So at the moment I cannot do anything! Because even if I force quit, and start the Mail program again, it tries to open this same email again!
My question is: How can I prevent Mail from automatically loading attachments? I would the same for images etc. I want the power to load and view attachments whenever I want them to load.

Do you keep the message preview pane open?
If so, close the message preview pane below the message list by double-clicking on the horizontal divider bar that separates the message list from the preview pane.
This will require double-clicking on a message in the message list to open it. If you have the Attachments and Message Size columns selected for the message list, you can select when you want to open a message that contains a large attachment or attachments.
If this is for a POP type account, there is no setting in Mail to prevent a message attachment from being loaded when opening the message if the message with attachment has been downloaded from the server.
Have a look at Mail Attachments Iconizer.
http://lokisw.com/index.php?item=MailAttachmentsIconizer

Are emails with the same subject shared between recipients?

I had the same subject for a variety of emails and they all show in the same tab. Can they all see eachothers messages?! If they can how do I fix it so they can't?

Only people who are explicitly included in the recipients list get the emails.
Your email program is grouping the emails together for your convenience since it assumes emails with the same subject are part of the same conversation.
Just because emails appear together on your screens does not mean other people not included in the emails sees them too.

Opening email with attachment

New to this device and forum. Trying to open email with attachment I click on the attachment and click save from the full menu and nothing happens. Can someone tell me what I am doing wrong? I can open and click and view easy on my pc. BB8330 with Verizon service. Thanks Jim

hello,
when you chose "save", it saved the message and not the attachment.
saving a message is like tagging it so that you can find it more easily by going to the tagged messages folder (the name of that folder is "saved messages".
what is the filetype of the attachment ? did you have a line called "Open attachment" ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Last opened email subject is shown when opening email with many destination addresses

Platform IPAD2 64Gb, OS version 4.3.5 (8L1), English default language.
Issue: email subject field contents not showing correctly.
Today I received on my gmail account an email that was targeted explicitely to a group of over 60 addresses, all of them together in the "to:" field.
on the left part of the screen I can properly see a part of the right subject of the email.
If I access another email, then open that one, the wrong subject of the last opened email is shown in the right part of the screen, just under the long recipient list, and before the correctly shown date time and content.
This happens consistently, and whatever other email I decide to open, its subject is shown in place of the right one.
While having that email opened, if I kill the email application (doubleclicking home and then killing the mail icon), and then relaunch email, the email opens immediately, and the subject is correctly shown.
I also had cases in which an attachment was not shown in the email, despite being there, and being visible as a clip icon on the left part of the screen (but this is a different issue).
Marco Guardigli ( @mgua )

Unfortunately there isn't official commercial support for Mozilla Thunderbird from Mozilla Corp.. I believe some contributors here ([http://mozilla.magicfab.ca myself included]) do offer such support, though.
''Before doing anything else, please do exit Thunderbird completely and [https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile backup the profile folder] - it contains all your email, settings, filters, etc.''
Regarding your issue, it looks like the mail folder information may be corrupt. In the left pane, in the folder list, right-click on the Sent folder and select '''Properties'''. Choose "'''Rebuild Index'''" or "'''Repair Folder'''" - do you even have that option? Once done, exit TB completely and restart it.
Updating to a newer version will help anyone help you, if only because some of the documentation for older Thunderbird versions is a bit harder to find and testing to try & reproduce your problem will be harder. Don't do this just yet, though :)
After this issue has been addressed I would suggest considering using IMAP if your provider allows you to, and of course archiving your email to Local Folders and doing regular backups of your profile.
If you want to arrange commercial support, contact me via the link I provided above and we can discuss rapidly. Otherwise I am fine continuing here, however I can only reply as time permits. I am in Montreal (so, EST time zone).

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Mail Shuts Down when trying to Open Email with movie

Just recently Mail is shutting down when I try to open an email with attached movie. When I mail again, the email is still there with the blue dot.
I found one document suggesting a Java..Cocoa plug in may be the culprit but no luck.
Any ideas?
Any assistance very much appreciated.

Am I the only one having troubles with Apple Mail?
As I said, when I go to open an email that has a movie (.wmv) attached it shuts mail down. Must be a record if I am the only one encountering this problem.
Any one? Any ideas?

Problem sending email with attachment by android

Good Morning, I'm Luca.
I have this problem:
through a smartphone with Android system,
synchronized via ActiveSync, the user
is unable to send emails with attachments.
While you can receive them and
open them without problem.
We have a server with Exchange 2010.
Is there any authorization that I have to give
you?
Other devices, always with Android system,
with other accounts of course,
does not have the same problem.
Thank you very much
Best regards

Luca, if one user is able to send attachments, the other should be able to as well. However, if an attachment is too large, it won't be delivered.
Agreed, This does sound like a size limitation issue.
Have the person try to send the same file from his outlook on his PC and see if he can send it out, that should be a good indication.

[SOLVED]Audacious can't open files with spaces on name

I open audacious
Type Ctrl+o and select a directory with spaces on it names,
Audacious opens nothing
Any ideas?
I have deep trees of music with spaces, I was working on a script to rename one by one, but I'm too lazy
Cheers
Last edited by geckos (2014-01-29 21:32:33)

Here is my solution, I did this for every error that apears like that...
[geckos@localhost ~]$ audacious
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
*** ERROR: /usr/lib/audacious/Input/cdaudio-ng.so could not be loaded: libcdio_cdda.so.1: cannot open shared object file: No such file or directory
^C[geckos@localhost ~]$
[geckos@localhost ~]$ pkgfile -r '.*/libcdio_cdda.so.1'
extra/libcdio-paranoia
[geckos@localhost ~]$ sudo pacman -Syu libcdio-paranoia
:: Synchronizing package databases...
(3/3) installing libcdio-paranoia [###########################################] 100%
[geckos@localhost ~]$
[geckos@localhost ~]$

Apple Mail 4.6 Crashes when opening email with signature

Everytime I open an email with an attachement and a signature Apple Mail 4.6 for 10.6.8 crashes. Does anybody have a solution for this? I already "Rebuild" my mailbox, and it didn't work.
Any help would be appreciated.
Here is the crash report I'm getting:
Date/Time:
2013-05-28 15:54:51 -0400
OS Version:
10.6.8 (Build 10K549)
Architecture:
x86_64
Report Version: 7
Command:
Mail
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Version:
4.6 (1085)
Build Version:   1
Project Name:
Mail
Source Version: 10850000
Parent:
launchd [102]
PID:
670
Event:
hang
Duration:
4.97s (sampling started after 2 seconds)
Steps:
9 (100ms sampling interval)
Pageins:
0
Pageouts:
0
Process:
Mail [670]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
UID:
501
Thread 336b
DispatchQueue 100
User stack:
9 ??? (in Mail + 9137) [0x33b1]
9 NSApplicationMain + 574 (in AppKit) [0x90269289]
9 -[NSApplication run] + 821 (in AppKit) [0x902711f3]
9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156 (in AppKit) [0x902aedd6]
9 _DPSNextEvent + 847 (in AppKit) [0x902af595]
9 BlockUntilNextEventMatchingListInMode + 81 (in HIToolbox) [0x98114a3e]
9 ReceiveNextEventCommon + 354 (in HIToolbox) [0x98114bb9]
9 RunCurrentEventLoopInMode + 392 (in HIToolbox) [0x98114e04]
9 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x988581f1]
9 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x988583c4]
9 __CFRunLoopRun + 8059 (in CoreFoundation) [0x9885aa3b]
9 __NSFireTimer + 141 (in Foundation) [0x9a3e5484]
9 _handleWindowNeedsDisplay + 696 (in AppKit) [0x902d907e]
9 -[NSWindow displayIfNeeded] + 204 (in AppKit) [0x902a7b64]
9 -[NSView displayIfNeeded] + 757 (in AppKit) [0x902de80e]
9 -[NSView _sendViewWillDrawInRect:clipRootView:suppressRecursion:] + 1290 (in AppKit) [0x9037ba1d]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[WebView(WebPrivate) viewWillDraw] + 84 (in WebKit) [0x9395a444]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[NSView viewWillDraw] + 621 (in AppKit) [0x9037c44a]
9 -[WebHTMLView(WebPrivate) viewWillDraw] + 114 (in WebKit) [0x9395a4c2]
9 WebCore::FrameView::updateLayoutAndStyleIfNeededRecursive() + 195 (in WebCore) [0x947794b3]
9 WebCore::FrameView::layout(bool) + 1493 (in WebCore) [0x94754585]
9 WebCore::RenderView::layout() + 272 (in WebCore) [0x947560f0]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 3852 (in WebCore) [0x94757d6c]
9 WebCore::RenderBlock::layoutBlockChildren(bool, int&) + 657 (in WebCore) [0x94759871]
9 WebCore::RenderBlock::layoutBlockChild(WebCore::RenderBox*, WebCore::RenderBlock::MarginInfo&, int&, int&) + 452 (in WebCore) [0x9475a654]
9 WebCore::RenderBlock::layout() + 48 (in WebCore) [0x94756260]
9 WebCore::RenderBlock::layoutBlock(bool, int) + 1410 (in WebCore) [0x947573e2]
9 WebCore::RenderBlock::layoutInlineChildren(bool, int&, int&) + 932 (in WebCore) [0x9475d414]
9 WebCore::RenderBlock::layoutRunsAndFloats(WebCore::LineLayoutState&, bool, ***::Vector<WebCore::RenderBlock::FloatWithRect, 0ul>&) + 1424 (in WebCore) [0x9475e2c0]
9 WebCore::RenderBlock::LineBreaker::nextLineBreak(WebCore::BidiResolver<WebCore: :InlineIterator, WebCore::BidiRun>&, WebCore::LineInfo&, std::pair<WebCore::RenderText*, WebCore::LazyLineBreakIterator>&, WebCore::RenderBlock::FloatingObject*) + 11188 (in WebCore) [0x947639b4]
9 WebCore::FontFallbackList::determinePitch(WebCore::Font const*) const + 38 (in WebCore) [0x94764de6]
9 WebCore::FontFallbackList::fontDataAt(WebCore::Font const*, unsigned int) const + 87 (in WebCore) [0x946ae817]
9 WebCore::FontCache::getFontData(WebCore::Font const&, int&, WebCore::FontSelector*) + 186 (in WebCore) [0x94764f0a]
9 WebCore::FontCache::getCachedFontData(WebCore::FontDescription const&, ***::AtomicString const&, bool, WebCore::FontCache::ShouldRetain) + 48 (in WebCore) [0x94828fc0]
9 WebCore::FontCache::getCachedFontPlatformData(WebCore::FontDescription const&, ***::AtomicString const&, bool) + 294 (in WebCore) [0x947657e6]
9 WebCore::FontCache::createFontPlatformData(WebCore::FontDescription const&, ***::AtomicString const&) + 147 (in WebCore) [0x94765a13]
9 +[WebFontCache fontWithFamily:traits:weight:size:] + 144 (in WebCore) [0x94765c10]
9 +[NSFont fontWithName:size:] + 39 (in AppKit) [0x9030e95f]
9 __NSFontFactoryWithName + 1031 (in AppKit) [0x9030ee40]
9 ATSFontFindVariationFromPostScriptName + 83 (in ATS) [0x9595534f]
9 _eATSFontFindVariationFromPostScriptName + 1133 (in ATS) [0x959557d3]
9 _eATSSendFontQuery + 829 (in ATS) [0x95983e1c]
9 CFMessagePortSendRequest + 882 (in CoreFoundation) [0x988ac802]
9 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x988581f1]
9 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x988583c4]
9 __CFRunLoopRun + 2079 (in CoreFoundation) [0x988592df]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x9921eafa]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 3371
DispatchQueue 1634545000
User stack:
9 start_wqthread + 30 (in libSystem.B.dylib) [0x992445c6]
9 _pthread_wqthread + 390 (in libSystem.B.dylib) [0x99244781]
9 _dispatch_worker_thread2 + 240 (in libSystem.B.dylib) [0x99244cfe]
9 _dispatch_queue_invoke + 163 (in libSystem.B.dylib) [0x99244f59]
9 kevent + 10 (in libSystem.B.dylib) [0x99245382]
Kernel stack:
9 kevent + 97 [0x47a699]
Thread 337b
User stack:
9 thread_start + 34 (in libSystem.B.dylib) [0x9924c0de]
9 _pthread_start + 345 (in libSystem.B.dylib) [0x9924c259]
9 ***::ThreadCondition::timedWait(***::Mutex&, double) + 81 (in JavaScriptCore) [0x93513fc1]
9 pthread_cond_wait$UNIX2003 + 73 (in libSystem.B.dylib) [0x9924e3f8]
9 __semwait_signal + 10 (in libSystem.B.dylib) [0x9924caa2]
Kernel stack:
9 semaphore_wait_continue + 0 [0x22a88f]
Thread 337c
User stack:
9 thread_start + 34 (in libSystem.B.dylib) [0x9924c0de]
9 _pthread_start + 345 (in libSystem.B.dylib) [0x9924c259]
9 __NSThread__main__ + 1499 (in Foundation) [0x9a3b7474]
9 -[NSThread main] + 45 (in Foundation) [0x9a3b74c4]
9 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 329 (in Foundation) [0x9a3f0224]
9 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x988581f1]
9 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x988583c4]
9 __CFRunLoopRun + 2079 (in CoreFoundation) [0x988592df]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x9921eafa]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 3384
User stack:
9 thread_start + 34 (in libSystem.B.dylib) [0x9924c0de]
9 _pthread_start + 345 (in libSystem.B.dylib) [0x9924c259]
9 __NSThread__main__ + 1499 (in Foundation) [0x9a3b7474]
9 -[NSThread main] + 45 (in Foundation) [0x9a3b74c4]
9 -[RSSInterchange _runManager] + 2030 (in Message) [0x90d0ea59]
9 -[NSRunLoop(NSRunLoop) run] + 76 (in Foundation) [0x9a3f1090]
9 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 279 (in Foundation) [0x9a3f11b3]
9 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x988581f1]
9 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x988583c4]
9 __CFRunLoopRun + 2079 (in CoreFoundation) [0x988592df]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x9921eafa]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 3387
User stack:
9 thread_start + 34 (in libSystem.B.dylib) [0x9924c0de]
9 _pthread_start + 345 (in libSystem.B.dylib) [0x9924c259]
9 __NSThread__main__ + 1499 (in Foundation) [0x9a3b7474]
9 -[NSThread main] + 45 (in Foundation) [0x9a3b74c4]
9 +[_NSSocket _runIOThread] + 98 (in Message) [0x90d513fb]
9 -[NSRunLoop(NSRunLoop) run] + 76 (in Foundation) [0x9a3f1090]
9 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 279 (in Foundation) [0x9a3f11b3]
9 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x988581f1]
9 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x988583c4]
9 __CFRunLoopRun + 2079 (in CoreFoundation) [0x988592df]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x9921eafa]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 3389
User stack:
9 thread_start + 34 (in libSystem.B.dylib) [0x9924c0de]
9 _pthread_start + 345 (in libSystem.B.dylib) [0x9924c259]
9 select$DARWIN_EXTSN + 10 (in libSystem.B.dylib) [0x9923dac6]
Kernel stack:
9 sleep + 52 [0x49115a]
Thread 3488
User stack:
9 pthread_cond_wait$UNIX2003 + 73 (in libSystem.B.dylib) [0x9924e3f8]
9 __semwait_signal + 10 (in libSystem.B.dylib) [0x9924caa2]
Kernel stack:
9 semaphore_wait_continue + 0 [0x22a88f]
Thread 3489
User stack:
9 pthread_cond_wait$UNIX2003 + 73 (in libSystem.B.dylib) [0x9924e3f8]
9 __semwait_signal + 10 (in libSystem.B.dylib) [0x9924caa2]
Kernel stack:
9 semaphore_wait_continue + 0 [0x22a88f]
Thread 348a
User stack:
9 pthread_cond_wait$UNIX2003 + 73 (in libSystem.B.dylib) [0x9924e3f8]
9 __semwait_signal + 10 (in libSystem.B.dylib) [0x9924caa2]
Kernel stack:
9 semaphore_wait_continue + 0 [0x22a88f]
Thread 348b
User stack:
9 pthread_cond_timedwait$UNIX2003 + 72 (in libSystem.B.dylib) [0x9924c2b1]
9 __semwait_signal + 10 (in libSystem.B.dylib) [0x9924caa2]
Kernel stack:
9 semaphore_wait_continue + 0 [0x22a88f]
Thread 3687
User stack:
9 start_wqthread + 30 (in libSystem.B.dylib) [0x992445c6]
9 __workq_kernreturn + 10 (in libSystem.B.dylib) [0x99244412]
Kernel stack:
9 bsdthread_create + 1313 [0x4d4581]
Binary Images:
0x1000 -   0x2b6ff7 com.apple.mail 4.6 (1085) <22FB32B7-75D3-863D-A023-74B19273C22B> /Applications/Mail.app/Contents/MacOS/Mail
0x90267000 - 0x90b4aff7 com.apple.AppKit 6.6.8 (1038.36) <A353465E-CFC9-CB75-949D-786F6F7732F6> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x90ceb000 - 0x90fe4fe7 com.apple.MessageFramework 4.6 (1085) <2F8098CE-8C7E-A44A-8425-D9BA994B28DA> /System/Library/Frameworks/Message.framework/Versions/B/Message
0x93509000 - 0x937b7fe7 com.apple.JavaScriptCore 6534.59 (6534.59.6) <BE3DA425-A441-7181-29C3-37EF345B1010> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x93941000 - 0x93a6afe7 com.apple.WebKit 6534.59 (6534.59.8) <66F85037-1A89-F7A1-8781-A621A05AB1CA> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x9469d000 - 0x95415fe7 com.apple.WebCore 6534.59 (6534.59.6) <5C71C61C-0657-1B0E-397F-4D0A81872C93> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x95935000 - 0x959d0fe7 com.apple.ApplicationServices.ATS 275.19 (???) <2E83B3E9-AF39-36FC-5D05-CC1E952098AB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x980e0000 - 0x98404fef com.apple.HIToolbox 1.6.5 (???) <21164164-41CE-61DE-C567-32E89755CB34> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x9881c000 - 0x98997fe7 com.apple.CoreFoundation 6.6.6 (550.44) <F88C95CD-1264-782D-A1F5-204739847E93> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9921e000 - 0x993c5ff7 libSystem.B.dylib ??? (???) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
0x9a3a1000 - 0x9a612fef com.apple.Foundation 6.6.8 (751.63) <69B3441C-B196-F2AD-07F8-D8DD24E4CD8C> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
Process:
Adobe Photoshop CS2 [367]
Path:
/Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Rosetta:
Yes
UID:
501
Process:
AirPort Base Station Agent [133]
Path:
/System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
UID:
501
Thread 52a
DispatchQueue 1
User stack:
9 ??? (in AirPort Base Station Agent + 5692) [0x10000163c]
9 NSApplicationMain + 364 (in AppKit) [0x100ba13b0]
9 -[NSApplication run] + 395 (in AppKit) [0x100ba868f]
9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155 (in AppKit) [0x100be2801]
9 _DPSNextEvent + 708 (in AppKit) [0x100be2eb2]
9 BlockUntilNextEventMatchingListInMode + 59 (in HIToolbox) [0x10247b4ac]
9 ReceiveNextEventCommon + 310 (in HIToolbox) [0x10247b5f3]
9 RunCurrentEventLoopInMode + 333 (in HIToolbox) [0x10247b7ee]
9 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x10095ad8f]
9 __CFRunLoopRun + 1698 (in CoreFoundation) [0x10095b902]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x1005efd7a]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 53e
DispatchQueue 2
User stack:
9 start_wqthread + 13 (in libSystem.B.dylib) [0x100609aa5]
9 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x100609c08]
9 _dispatch_worker_thread2 + 252 (in libSystem.B.dylib) [0x10060a2de]
9 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x10060a7b4]
9 kevent + 10 (in libSystem.B.dylib) [0x100608c0a]
Kernel stack:
9 kevent + 97 [0x47a699]
Thread 555
User stack:
9 thread_start + 13 (in libSystem.B.dylib) [0x100628e89]
9 _pthread_start + 331 (in libSystem.B.dylib) [0x100628fd6]
9 select$DARWIN_EXTSN + 10 (in libSystem.B.dylib) [0x100633932]
Kernel stack:
9 sleep + 52 [0x49115a]
Binary Images:
0x100000000 -
0x100027fff com.apple.AirPortBaseStationAgent 1.5.5 (155.2) <00010203-0405-0607-0809-0A0B0C0D0E0F> /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
0x1005ef000 -
0x1007b0fef libSystem.B.dylib ??? (???) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylib
0x10090f000 -
0x100a86fe7 com.apple.CoreFoundation 6.6.6 (550.44) <BB4E5158-E47A-39D3-2561-96CB49FA82D4> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x100b9f000 -
0x101599ff7 com.apple.AppKit 6.6.8 (1038.36) <4CFBE04C-8FB3-B0EA-8DDB-7E7D10E9D251> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x10244d000 -
0x10274bfff com.apple.HIToolbox 1.6.5 (???) <AD1C18F6-51CB-7E39-35DD-F16B1EB978A8> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
Process:
AppleSpell [201]
Path:
/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell
UID:
501
Thread 869
DispatchQueue 1
User stack:
9 ??? (in AppleSpell + 4816) [0x1000012d0]
9 ??? (in AppleSpell + 5472) [0x100001560]
9 -[NSSpellServer run] + 72 (in Foundation) [0x10013b0de]
9 CFRunLoopRun + 70 (in CoreFoundation) [0x10081eb16]
9 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x10081ed8f]
9 __CFRunLoopRun + 1698 (in CoreFoundation) [0x10081f902]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x1004b6d7a]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 86d
DispatchQueue 2
User stack:
9 start_wqthread + 13 (in libSystem.B.dylib) [0x1004d0aa5]
9 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x1004d0c08]
9 _dispatch_worker_thread2 + 252 (in libSystem.B.dylib) [0x1004d12de]
9 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x1004d17b4]
9 kevent + 10 (in libSystem.B.dylib) [0x1004cfc0a]
Kernel stack:
9 kevent + 97 [0x47a699]
Binary Images:
0x100000000 -
0x1000a9fe7 com.apple.AppleSpell 1.6.2 (62.2) <C1BFCEAF-4155-E9DB-52ED-51D3BC225ECE> /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell
0x1000bc000 -
0x10033efff com.apple.Foundation 6.6.8 (751.63) <E10E4DB4-9D5E-54A8-3FB6-2A82426066E4> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x1004b6000 -
0x100677fef libSystem.B.dylib ??? (???) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylib
0x1007d3000 -
0x10094afe7 com.apple.CoreFoundation 6.6.6 (550.44) <BB4E5158-E47A-39D3-2561-96CB49FA82D4> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
Process:
AppleSpell [202]
Path:
/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell
UID:
501
Thread 86a
DispatchQueue 1
User stack:
9 ??? (in AppleSpell + 4816) [0x1000012d0]
9 ??? (in AppleSpell + 5472) [0x100001560]
9 -[NSSpellServer run] + 72 (in Foundation) [0x10013b0de]
9 CFRunLoopRun + 70 (in CoreFoundation) [0x10081eb16]
9 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x10081ed8f]
9 __CFRunLoopRun + 1698 (in CoreFoundation) [0x10081f902]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x1004b6d7a]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 86c
DispatchQueue 2
User stack:
9 start_wqthread + 13 (in libSystem.B.dylib) [0x1004d0aa5]
9 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x1004d0c08]
9 _dispatch_worker_thread2 + 252 (in libSystem.B.dylib) [0x1004d12de]
9 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x1004d17b4]
9 kevent + 10 (in libSystem.B.dylib) [0x1004cfc0a]
Kernel stack:
9 kevent + 97 [0x47a699]
Binary Images:
0x100000000 -
0x1000a9fe7 com.apple.AppleSpell 1.6.2 (62.2) <C1BFCEAF-4155-E9DB-52ED-51D3BC225ECE> /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell
0x1000bc000 -
0x10033efff com.apple.Foundation 6.6.8 (751.63) <E10E4DB4-9D5E-54A8-3FB6-2A82426066E4> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x1004b6000 -
0x100677fef libSystem.B.dylib ??? (???) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylib
0x1007d3000 -
0x10094afe7 com.apple.CoreFoundation 6.6.6 (550.44) <BB4E5158-E47A-39D3-2561-96CB49FA82D4> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
Process:
autofsd [53]
Path:
/usr/libexec/autofsd
UID:
0
Thread 1b9
DispatchQueue 1
User stack:
9 ??? (in autofsd + 5340) [0x1000014dc]
9 ??? (in autofsd + 6461) [0x10000193d]
9 CFRunLoopRun + 70 (in CoreFoundation) [0x1000b6b16]
9 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x1000b6d8f]
9 __CFRunLoopRun + 1698 (in CoreFoundation) [0x1000b7902]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x1002fbd7a]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread 1d4
DispatchQueue 2
User stack:
9 start_wqthread + 13 (in libSystem.B.dylib) [0x100315aa5]
9 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x100315c08]
9 _dispatch_worker_thread2 + 252 (in libSystem.B.dylib) [0x1003162de]
9 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x1003167b4]
9 kevent + 10 (in libSystem.B.dylib) [0x100314c0a]
Kernel stack:
9 kevent + 97 [0x47a699]
Binary Images:
0x100000000 -
0x100001ff7 autofsd ??? (???) <A17264FB-7A05-5AF3-2655-B78B145BFE7D> /usr/libexec/autofsd
0x10006b000 -
0x1001e2fe7 com.apple.CoreFoundation 6.6.6 (550.44) <BB4E5158-E47A-39D3-2561-96CB49FA82D4> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x1002fb000 -
0x1004bcfef libSystem.B.dylib ??? (???) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylib
Process:
awacsd [24]
Path:
/usr/sbin/awacsd
UID:
0
Thread 15a
DispatchQueue 1
User stack:
9 ??? (in awacsd + 10904) [0x100002a98]
9 ??? (in awacsd + 35220) [0x100008994]
9 ??? (in awacsd + 62916) [0x10000f5c4]
9 semaphore_wait_trap + 10 (in libSystem.B.dylib) [0x1009a4db6]
Kernel stack:
9 semaphore_wait_continue + 0 [0x22a88f]
Thread 191
DispatchQueue 2
User stack:
9 start_wqthread + 13 (in libSystem.B.dylib) [0x1009beaa5]
9 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x1009bec08]
9 _dispatch_worker_thread2 + 252 (in libSystem.B.dylib) [0x1009bf2de]
9 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x1009bf7b4]
9 kevent + 10 (in libSystem.B.dylib) [0x1009bdc0a]
Kernel stack:
9 kevent + 97 [0x47a699]
Binary Images:
0x100000000 -
0x100042ff7 awacsd ??? (???) <19928243-52E6-8CD3-F1F3-E077CEF1312F> /usr/sbin/awacsd
0x1009a4000 -
0x100b65fef libSystem.B.dylib ??? (???) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylib
Process:
configd [14]
Path:
/usr/libexec/configd
UID:
0
Thread f2
DispatchQueue 1
User stack:
9 start + 52 (in configd) [0x100000d04]
9 main + 2051 (in configd) [0x10000151a]
9 server_loop + 72 (in configd) [0x100001d70]
9 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x100086d8f]
9 __CFRunLoopRun + 1698 (in CoreFoundation) [0x100087902]
9 mach_msg_trap + 10 (in libSystem.B.dylib) [0x1003d3d7a]
Kernel stack:
9 ipc_mqueue_receive_continue + 0 [0x210d84]
Thread f3
DispatchQueue 2
User stack:
9 start_wqthread + 13 (in libSystem.B.dylib) [0x1003edaa5]
9 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x1003edc08]
9 _dispatch_worker_thread2 + 252 (in libSystem.B.dylib) [0x1003ee2de]
9 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x1003ee7b4]
9 kevent + 10 (in libSystem.B.dylib) [0x1003ecc0a]
Kernel stack:
9 kevent + 97 [0x47a699]
Thread f5
User stack:
9 thread_start + 13 (in libSystem.B.dylib) [0x10040ce89]
9 _pthread_start + 331 (in libSystem.B.dylib) [0x10040cfd6]
9 plugin_exec + 1440 (in configd) [0x1000034d7]
9 CFRunLo

Not really a fan of long unedited system log dumps.
I would - not that it helps - dump the 7300GT before it dumps on you.
Mail has a history of when it goes bad it really goes.
And the folks that know Mail the best would be in OS X subforum
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard#/?tag Set=1007

Problems sending email with attachments

This is a long story. We use a satellite connection at home and in our motorhome most of the time. We use our air card (USB 760) for special needs and when we are travelling without our motorhome.
The past two weekends I have had to use the aircard. During that use I prepared some email with various sized attachments (max 1.2 meg). On the first weekend the email with attachments would not send (Eudora/POP3/Godaddy). Then I tried a different ISP I have to use for a special assignment (Eudora/POP3/Bellweather.net) and it went through.
When I got back to the house, I contacted Godaddy and they did not find anything in their system that would cause a problem. During the testing with them, the email with attachments went through just fine (on satellite). I laid it off to a Godaddy problem.
This past weekend, I prepared another email with a small attachment and it would not send via either ISP. Then I connected to the motel wireless and it went just fine via Godaddy.
So, all of the testing points to a problem with my Verizon connection. I have checked and I have the latest software. The Verizon tech folks have evelated it to see if they can figure out what is going on.
Anyone else have the same problem? Any thoughts on what the problem might be?
Jim Shepherd
three zero three 478 thirty five zero one.

Message attachments are allowed in Hosted VZEmail Services using your USB 760 air card. However, to enhance security some attachment types will be blocked and cannot be sent.
The blocked attachment types include, but are not limited to, the following:
.exe
.bat
.pif
.msi
.vbs
.com
Thank you, LatachaM_VZW

Problem opening email with space in subject

Similar Messages

Maybe you are looking for