Problem with the currency fields in the table cdpos

Hi Gurus,
I have observed one thing with the cdpos table like whenever we made changes to the currecy( and numeric fields also ,i am not sure ) fields ,then in the cdpos table it is showing a new entry for that change but not showing that old value, why? .But when we made any changes to date fields ,then it is storing that old date.
So Is there any specific feature in this table.
Thanks & Regards,
Rakesh.

Hello
In ABAP-programm try this:
DATA:       NEW LIKE CDPOS-VALUE_NEW,
      OLD LIKE CDPOS-VALUE_OLD,
      NEW1 TYPE MENGE_D,
      OLD1 TYPE MENGE_D.
FIELD-SYMBOLS: <f> TYPE ANY.
* make select from CDHDR and CDPOS
IF CDPOS-FNAME = 'MENGE'.
MOVE CDPOS-VALUE_NEW TO NEW.
MOVE CDPOS-VALUE_OLD TO OLD.
ASSIGN NEW TO <f>.
CATCH SYSTEM-EXCEPTIONS CONVT_NO_NUMBER = 2
       OTHERS = 4.
       NEW1 = <f>.
ENDCATCH.
ASSIGN OLD TO <f>.
CATCH SYSTEM-EXCEPTIONS CONVT_NO_NUMBER = 2
       OTHERS = 4.
       OLD1 = <f>.
ENDCATCH.
ENDIF.
After this in NEW1 and OLD1 you will see values.

Similar Messages

Problem with displaying Date field in the table.

Hi All,
I am trying to display data into a table UI Element.
In that data, i have one DATE type field. While displaying data in DATE field, it will display like this "01.02.2009".
Now my requirement is if i want to modify that DATE field, it will allow to modify "01.02.2009" to "26.02.2009".
But while modifying DATE field , I want to show the Calender of that month, in that i have to select the another date.
(Like normal Date UI Element will show that calender).
Can anyone please help me.
Thanks in Advance!
Regards,
Sreelakshmi.

Hi,
Go to the context attribute that was mapped to the DATE field of the table and change the perperty INPUT HELP MODE to AUTOMATIC and it works.
Regards,
Manne.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problem with S001 - Key field Sequence in table

Hi,
We want to use the extractor 2LIS_01_S001 with Delta. But delta is not working with these extractor. When I checked LBW0, I am getting error "The LIS environment is setup incorrectly".
According to note 115192, the key fields in tables S001, S001BIW1 and S001BIW2 have to be in the same sequence.
But we are on 4.7 with following Support Packs:
SAP_APPL 470 0025 SAPKH47025 Logistics and Accounting
PI 2004_1_470 0007 SAPKIPZI57 R/3 Plug-In (PI) 2004.1 for
R/3 Enterpri
PI_BASIS 2004_1_620 0010 SAPKIPYI5A Basis Plug-In
(PI_BASIS) 2004_1_620
And according to this note, solution is delivered with this Support Packs.
Can you please tell me that if this note is mandatory for all the releases..?
Did any one encounter this issue before..?
Thanks & Regards,
Samay Mehta

I changed my entity: unchecked the X column to be primary key added RowID as a primary key. Now it works.
What's wrong with my CHAR(1) as a primary key ?
I also tried to add a Refresh button:
<af:commandButton text="Refresh" id="cb3"/>and in the table add a partialTarget to the button. Now when I add new row and press the Refresh button - then it works.
So it seems that the problem is when I add new row and enter data, the table is not refreshed and the row is missing it's primary key.
Any solutions?
Edited by: a.gruev on Nov 26, 2009 4:18 PM

Problem with a Currency field in Adhoc Query - HR

Hi,
I have an Adhoc query that uses Custom infotype fields (Z infotype and z fields).
The currncy field also has a reference field in the infotype (of type waers).
Wehen we try to get the ouput of the Adhoc Query it gives following error:
The report cannot be generated because the internal description is invalid or incomplete, or because the selection screen is too large.
Regenerate the assigned InfoSet, and read the log. If the InfoSet is OK, make sure that at least one field is given as output.
If you used the 'Refresh' icon to start the query, use the 'Output' menu option to execute the query. This gives you a full screen display of the data.
If an output was generated, the query cannot work with actual data in the construction view. In this case, always use the 'Output' function to execute the query.
I have already tried a number of solutions:
1> Regenerate the infoset...
2> make the field as an additional field and write my own code for it (the error comes before the code as i kept a breakpoint but it stopped before that)
if i add other fields of this infoset instead of this field, then those appear in the output.
Any solutions ??
thanks in advance,
Anuj

Hi,
Is the problem not clear or no one has an answer?
Please reply with some suggestions..
Regards,
Anuj.

Problem with Auo Increment field in Database table

HI...
I have a table with Auto increment field.
I am using Sql Server 2000.
I have a Table Component on front end which is binded with that (auto increment) table.
When I call commitChanges() I receive following exception :
Exception Details: java.lang.RuntimeException
Number of conflicts while synchronizing: 1 SyncResolver.INSERT_ROW_CONFLICT row 2 [sunm][SQLServer JDBC Driver][SQLServer]Cannot insert explicit value for identity column in table 'Authorization_Book' when IDENTITY_INSERT is set to OFF.Anybody knows the solution...

The following excerpts are from http://blogs.sun.com/roller/page/jfbrown?entry=using_creator_to_insert_into. Do they help?
What about IDENTITY or AUTOINCREMENT or other database-generated columns?
This is highly database dependent. Some databases require you to obtain the key through vendor-specific means. Others say "set the value to null". Some say to not include the column in the INSERT statement.
So how do I exclude my IDENTITY or other column from the INSERT statement?
Use the RowSet's advanced insertableColumns property. Create a boolean[] array with one value for each column in the result. Use true to include the column in the INSERT statement, otherwise use false. The RowSet's property sheet doesn't allow you to set this property (in Creator2-EA2), so set the property in your java code.

Problem with Local Currency field in PIPE monitor

Hello, We have configured PIPE in BW and sent idoc WPUBON (sales) there.
But the task u2013 u201CSupply to BW immediatelyu201D are failed :
The error message is :
"Field Local Currency does not have a value (initial).
System Response
Current processing requires the field to be enriched within the master data checks.
Procedure for System Administration
Check Customizing for the master data checks."
My question is if the problem are reffered to PIPE configuration problems or BW master data downloading ?
I didnu2019t find this field anywhere in /POSDW/img. Maybe this is BW master data problem?
But I am confused the phrase u201CCustomizing for the master data checksu201D . Is it still the PIPE cutomizing problem?
Where is the "Customizing for the master data checks"? What does it mean?
Thank You.

Hi
Can any one please tell me do you have any solution for this. I am getting problem in quality box.
Regards
Mark

Problem with adding user fields to user table

hi everyone,
i have written code to create user tables and some user fields to that table....
its working fine...
in the code i have some conditions like if the table is already created.. then it should execute the code written for creating table..?
udTables1 = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
            If udTables1.GetByKey("FA_MASTERDATA") Then
                udTables1 = Nothing
            Else
                udTables1.TableName = "FA_MASTERDATA"
                udTables1.TableDescription = "Fixed Assets Master Data"
                udTables1.TableType = SAPbobsCOM.BoUTBTableType.bott_MasterData
                ret2 = udTables1.Add()
System.Runtime.InteropServices.Marshal.ReleaseComObject(udTables1)
                udTables1 = Nothing
                GC.Collect()
            End If
but how to check the same condition for adding fields????
udfields1 = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            '' 1st field
            udfields1.TableName = "FA_MASTERDATA"
            udfields1.Name = "Alias"
            udfields1.Description = "Alias"
            udfields1.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
            udfields1.EditSize = 20
'''how to write condition to check whether the field is already creatd or not????
            ret3 = udfields1.Add()
System.Runtime.InteropServices.Marshal.ReleaseComObject(udfields1)
            udfields1 = Nothing
            GC.Collect()

hi try this..
oUserFieldsMD = muc_ParentAddon.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            '********Adding 1st Field
            If Not IsFieldExist("POR1", "PINo") Then
                oUserFieldsMD.TableName = "POR1"
                oUserFieldsMD.Name = "PINo"
                oUserFieldsMD.Description = "Purchase Indent No"
                oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
                oUserFieldsMD.EditSize = 20
                lRetCode = oUserFieldsMD.Add
                If lRetCode <> 0 Then
                    muc_ParentAddon.SBO_Company.GetLastError(lErrCode, sErrMsg)
                    MsgBox(sErrMsg)
                    Return False
                    Exit Function
                Else
                    Fields = True
                End If
            End If
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD)
Private Function IsFieldExist(ByVal as_TableName As String, ByVal as_FieldID As String) As Boolean
        Dim flag As Boolean
        Dim businessObject As SAPbobsCOM.Recordset
        Try
            businessObject = DirectCast(Me.muc_ParentAddon.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset), SAPbobsCOM.Recordset)
            businessObject.DoQuery(String.Concat(New String() {"Select * From CUFD Where TableId = '", as_TableName, "' AND AliasID='", as_FieldID, "'"}))
            If (businessObject.RecordCount > 0) Then
                flag = True
            Else
                flag = False
            End If
        Catch exception1 As Exception
            Me.muc_ParentAddon.SBO_Application.SetStatusBarMessage(exception1.Message, SAPbouiCOM.BoMessageTime.bmt_Short, True)
        End Try
        System.Runtime.InteropServices.Marshal.ReleaseComObject(businessObject)
        Return flag
    End Function
hope it helps

Validated the currency field in WEB

Dear all,
I have a develop a new WEB SRM screen, but I'm not managing to validate the Currency field when the user puts letters.
The field is of type CURR and when the user hits "enter" it puts all letters in CAP but doesn't sends any error message.
Anyone had this problem?
Thank you in advanced,
Vasco Pires

Hi Masa,
The screen works corretly when we run it on SAP Gui, the field has the type CURR, but when we executed on web, with a its web interface:
<input type="text" name="ZDADOS_FACT-PRC_NOVO[`j`]" value="`ZDADOS_FACT-PRC_NOVO[j].value`"
maxlength="17" size="10">
But when the users inputs the price, the system doesn't send the error box with the error message.
Thank you for your support,
Vasco

To Remove comma's from the Currency Field

Hi,
I Want to print the Currency Field in the smartform without
comma's.
Is there any Function Module to suppress comma's .
Eg: 1,000.00 to 1000.00
Regards
Praveen.
Edited by: praveen kumar on Jan 20, 2009 2:13 PM

Hi,
Following code will help you in this way,
TABLES: aufk.
TYPES: BEGIN OF t_aufk,
user4 LIKE aufk-user4,
withoutc(13),
END OF t_aufk.
DATA: it_aufk TYPE STANDARD TABLE OF t_aufk WITH HEADER LINE,
wa_it_aufk TYPE t_aufk.
SELECT user4 FROM aufk UP TO 10 ROWS
INTO CORRESPONDING FIELDS OF TABLE it_aufk.
BREAK-POINT.
LOOP AT it_aufk INTO wa_it_aufk.
wa_it_aufk-withoutc = wa_it_aufk-user4.
MODIFY it_aufk FROM wa_it_aufk INDEX sy-tabix.
ENDLOOP.
LOOP AT it_aufk into wa_it_aufk.
WRITE: / wa_it_aufk-user4, wa_it_aufk-withoutc.
ENDLOOP.
Please test with your own table and field may be you will not able to get any amount in the above used itab, if you only want to test place a break point just before 1st loop and add some values in the debuger mode to the amount field.
Please Reply if any Issue,
Kind Regards,
Faisal
Edited by: Faisal Altaf on Jan 20, 2009 6:46 PM

Currency field on the PO line

Gurus,
the currency field on the PO is defaulting to the Vendor ordering currency and is completely fgreyed out not allowing a change. Is there a config that can change this field to be editable??
Thanks in advance,
MV

Hi,
Its easy to change Currency default in item details.
go to header --> delivery/invoice tab then you see here currency enter wich currency you want this will automatically change item details .
Hope this helps you
Prem.

Problem in using Currency Field in EXTRACTOR

hello,
I have a requirement to create Extractor involving some fields from a Ztable.
While creating extractor (data source) in RSO2 transaction, when i enter the Z table name in "Extraction from DB view - View/Table" and click on SAVE, i get an error msg " Invalid extract structure template ZTABLE of DataSource Zextractor".
But if i remove the only currency field in the ztable and then try using the ztable for extractor, its working fine. I dunno why? but i need the currency field in the extractor. Kindly let me know how to deal with this issue. Sure points for useful answers.
thx,
BaLaJi.......

hi,
for currency fields and decimal fields u should provide reference for them. give currency field in fields section -> click on refernce -> give
currency field name table name refernce key name table name -> save n activate.
if helpful reward some points.
with regards,
Suresh.A

How can I find the currency field of table KOMU

I need to select data from table KOMU, including field wrbtr. in 'Currency/Quantity Fields' tab, it's defined to use bkpf-waers.
but how can i find the corresponding record in bkpf? could anyone tell me the relation between these two table?
or is there another way to get the currency field?
thank you!

Hi,
In that case, please retrieve the currency & store it in variable. Pass the variables to the Function Module.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
     EXPORTING
          date             = syst-datum
          foreign_amount   = for_amount
          foreign_currency = L_cur1
          local_currency   = l_cur2
     IMPORTING
          local_amount     = loc_ammount
     EXCEPTIONS
          no_rate_found    = 1
          overflow         = 2
          no_factors_found = 3
          no_spread_found = 4
          derived_2_times = 5.
[Code]
Best regards,
Prashant
[code]

Is it possible to map the cmp fields of the entity bean with out dictionary

Dear sirs,
I have created the EJB project module and WEB Module. Now i have to map the CMP fields of the entity bean to the underlying table. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
I have got some error while mapping an EJB's CMP fields to the table through dictionary. I was actually intended to map 79 fields but it gives an error that more than 64 fields are not allowed while building the dictionary.
1. Can you tell me what could be the possible reason?
2. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
Kindly helo me,
Sudheesh K S

Hi,
Sudheesh please check up if the below link helps,there are other ways of writing the persistent.xml for container managed entity bean.
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f695f0c84acf46a4e0b31f69d8a9b7/frameset.htm, probably in the studio you cannot browse through tables not in the java dictionary,but manually editing it may still solve the problem.
Also here is another link that specifies the databases supported by J2EE Engine.
http://help.sap.com/saphelp_nw04s/helpdata/en/66/a5283eeb47b40be10000000a114084/frameset.htm
The below link shows how to specify the database vendor and datasource
http://help.sap.com/saphelp_nw04s/helpdata/en/e1/67fc3ee241ba28e10000000a114084/frameset.htm
Hope you are able to solve the problem.
Do let us know if you come up with the solution.
Regards,
Harish
Message was edited by: HARISH SUBRAMANIAN

Problem with the currency fields in the table cdpos

Similar Messages

Maybe you are looking for