Problems displaying Web Templates in Enterprise Portal

Hi folks,
I'm trying to create an iView showing a BI-Webtemplate. Both systems, the BI and the EP are running on different servers in the same domain and are both using Netweaver 7.0.
I've created a new system using the "SAP System Dedicated Application Server"-Template. I've also configured all necessary options for a connection via the WAS and logon with UIDPWD. The connection test also succeeds.
From the Web Application Designer I got the following URL to my web template:
http://<domain>:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=Z_BL_GP_RW_01&DUMMY=1
I've then created an iView (BEx Web Application iView (SAP NetWeaver 7.0 Format)) pasting TEMPLATE=Z_BL_GP_RW_01&DUMMY=1 as web application query string and entered the correct system alias.
The problem is, when previewing I can enter my credentials but then I receive a 404 error. It's not that the template isn't there, the URL generated by the portal to call the template is wrong, because the wrong port is used. The generated URL is:
http://<domain>:8000/irj/servlet/prt/portal/prtmode/preview/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Well, it's the right port for the WAS, but apparently not the right port for the web template which should be 50000. When I set the the port in the system configuration for the WAS to 50000, the connection test fails, but I don't get a 404 error when previewing the iView. Nonetheless the template is not displayed correctly...
Does anyone know what I am doing wrong?

Danny,
Logon to the BI system and go to transaction SE37 and execute RSBB_URL_PREFIX_GET to get the portnumber, try applying this and test your iview again.
If this does not resolve the issue I suggest you to refer to SAP Note 937697 - Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool, it is a pretty simple tool and helps in resolving most issues with regards to BI Portal integration.
Cheers!
Sandeep Tudumu

Similar Messages

Caching web templates using the portal cache - experiences

Hi,
To improve performance, I would like to cache a (7.0) web template in the portal. I adjusted the iView by changing the following fields:
Cache Level to shared
Cache Validity Period to 1 hour
However, the template still takes 10 seconds to load, the same time as before.
The template doesn't have a variable screen that is shown (all variables are optional), so according to note 1002778 'Caching in the Enterprise Portal' there doesn't seem te be a problem.
Do you have suggestions why it doesn't work, and if there steps I could perform to make it working?
Cheers,
Daniel

Hi,
Finally SAP OSS has answered me on portal caching in BI 7.0. From their reaction:
"In the new Portal infrastructure in NetWeaver 7.0 the iView properties
for iView portal caching are not evaluated by BI as it was in BW 3.5.
In 3.5 portal infrastructure this feature had special implementation
which was evaluated as not situable for the NW 7.0 infrastructure.
The iView properties are visible, even if they do not fit to BI
iViews as we do not have the possiblity to switch off this visibility
for some types of iViews.
Nevertheless, some parts like Web Templates, Web Items are stored
in the cache on Java Server and are reused when the same Template
is loaded again.
So in 7.0 we do not have functionality like in 3.x for storing of
the generrated HTML. As of my knowladge, there is no workaround for
that (besides what you have mentioned."
So we'll have to wait for the BO stuff, which has pretty good pre-calculations options which can serve as cache.
Kind regards,
Daniel

WebI reports in Enterprise Portal - Are they static??

Hi All,
We currently have Bex reports on our enterprise Portal. Users can actually go to the portal and view the reports and go to edit mode and drag and drop objects and change the view the way they like and save it as a new view.
We are planning to shift from Bex Reporting to business Objects. If I create an iview for WebI report and have the WebI report on the Portal, can we do the same. Can we still edit the Report and save a different report of it or is it more like a static page with just the data.
We need to give atleast 100 users the ability to get to these queries and make changes to them as they like and save their own views.
Also what is Knowledge Management? Does that give us the ability to create webI reports in enterprise Portal. Please calrify..
Thank you,
Aparna

Hi
you can edit a report which is visible over a URL iView and save it in the BOBJ repository under a different name (assuming your user has been assigned the appropriate auhtorizations in the bobj repository). The problem is that the iView will always invoke the original report.
I would recommend using KMC. It provides you with the ability to view and create WebI reports from within the EP. Another option is to add a URL iView, hich starts the InfoView (simplified: BOBJ Portal) from within the portal. But the look and feel over the KMC integration is more EP complient.
Take a look at the Installation and Administration Guide for the BOBJ XI Integration for SAP solutions.
http://service.sap.com/~sapidb/011000358700000843912009E/xi31_sp2_bip_sap_install.pdf
Regards,
Stratos

About web templates inside the portal

Hi !
I need your help because I would like to do something and I cant do it, even after reading a lot of documentation.
I would like to display my lovely web templates (made with the Web Application Designer) inside the portal, through the BI > Bex Web Analyzer. But there, I can only open queries, views and infoproviders.
Is there an easy way to display my web templates in the portal ?
Thanks for your help,
Best regards.

Hi Cedric,
The setting of web templates for BEX is available in BI.
You can check IMG setting in the SPRO transaction, setting up the BEX templates.
There you can define the tchnical name of the template.
After the changes been done, remember to restart the ABAP stack.
Regards,
Prashil

Problem applying web template

We've recently upgraded from SharePoint 2010 to 2013. We created a new site under the 2013 environment then created a template from it. When we try to apply that template to a new site we get the following error:
Problem applying web template
It then list the following features as not installed:
List Feature
Module Feature
Web EventReceivers Feature
Property Bag Feature
Here is a screenshot of the error
We haven't noticed any other issue up to this point. Any assistance would greatly be appreciated.
Thanks,
Bill

How many of those as solutions are from CodePlex? I think the property bag one is
http://featureadmin.codeplex.com
It has a 2013 upgrade on
http://pbs2013.codeplex.com
If its unclear what the other features these are, it may be worth running the feature manager. This will potentially enable you to identify and disable those solutions. The link is
http://featureadmin.codeplex.com
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Problems with activity reports on Enterprise Portal

Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
And we found this exception in logs: "Exception during a Prepared-statement DB update"
What could be a problem? What should we do?
Thank you.

Configurarion of the Data Collection Service is done well, I think:
Activate portal activity report: true
First day of the week (e.g., Sunday or Monday): Monday
Gather iView statistics:true
Gather page statistics:true
Gather statistics for remote users of local content (global portal): true
Number of days for daily data retention: 90
Number of days for hourly data retention: 30
Number of days for monthly data retention: 730
Number of days for quarterly data retention: 1460
Number of days for weekly data retention: 365
Objects to exclude from reports
Pages for which to gather user data
Save interval (minutes): 60
What should we do then?

How to Display DMS document in Enterprise Portal

Hi All,
I have a scenario as described below.
I have a workitem which goes to user in his/her UWL for execution. When this workitem gets executed it displays an Adobe Interactive form.
Iin this Adobe form i am giving links to DMS(Document Management System) documents. So when this link is clicked the related DMS document files should get displayed.
Thru BAPI i m able to get DMS document number its Object Links and details of the files (PDF,DOC,XLS etc..) attached to it.
But I am not able to display this attached files on my enterprise portal. I debugged in R/3 and found out standard Function Modules which are used to display this attached documents of DMS and wrap them in RFC and called this RFC when user clicks link on Adobe Form in EP.
The problem I m facing is this RFC is not able to display the attached document files of DMS document on Portal front end. it gives error as u201CException condition "NOT_SUPPORTED_BY_GUI" raised., error key: RFC_ERROR_SYSTEM_FAILURE"
The reason behind why it is running successfully in R/3 is, it gets front end as SAPGUI but while we execute it thru portal it does not get frontend type as SAPGUI cause portal always runs in Browser not on SAPGUI.
So, Is there any way to display this DMS document files on Enterprise Portal?? Or is it possible using Knowledge Management?? Or any other standard BAPI or FMs which can be used for the same purpose??
Regards,
Dhruv

Hi Steelman,
You have to create a new iview and include it in the page that youhave created.
There are many types of iviews that you can create.
Please refer these link
http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/content.htm
Revert back for further queries.
Regards,
Sharadha

Problem displaying Web charts via Excel 2003

Hello,
While displaying a Web template via a hyperlink in <b>Excel 2003</b> (the hyperlink contains the template's URL), all charts in the template aren't displayed. The small red x appears in the chart's area. Charts are displayed only after refreshing the browser.
Same scenario works fine with Excel XP !!!
No problem occures when openning the same URL directly in the browser, so I guess the problem relates somehow to the hyperlink.
Any ideas?
Thanx.

Strange...
I can think of a hack: Have an intermediate html page that gets displayed first anytime the display type (html/xls) is changed. Just a blank html page with a redirect that directs to the source you really want to display.
Should be transparent, and it should clear up your problem as you described it.

Problem with Web Template

Hi,
We are facing some problem in WAD.
We have developed some reports based on views and as well on queries.
As per our requirement we merged all the reports in a Standard web Template, and we are using table and graph as web items for the template, here the user can select any report becoz we have query selection option, then it will display the particular report. But we are getting the problem with the Template.
While publishing the template we will get three tabs 1.DATA ANALYSIS, 2. GRAPHICAL DISPLAY 3.INFORMATION. in the initial screen that means in the DATA ANALYSIS tab it should display only the table, but in our case it is displaying both table and graph.
And also if you select graphical tab then that should highlight the particular tab and with the particular graph, but the tabs is not highlighting when you selecting that.
If you have any solutions please let us know.
Regards,
Nossum Chandu.

Hi
I have having almost similar problem. The difference is that it is other way around.
The problem is from Development server instead from production. I am not using slandered template.
I have done following but fail to resolve it-
1) Loading templates using WAD gives inconsistency error. Object "...." is inconsistent.
Recalling query in QD returns following two errors "BEx transport request is not available or not suitable 0", "Choose an existing request 0"
2) While running the query using TX RSRT2 (Query Monitor support package X), returns error "An error has occurred in the script of this page" Line 11039, Char 1, Error Access is denied and so on...
3) ICM ok, Services are checked.
4) SM50 log does not give any clues
5) There is no URL issue.
6) BW Functionalities are active.
Could some suggest?
Thanks in advance

Sso from webdynpro app (on WAS 2004s ) to BW web template ( on BW portal )

Guys -
We want to give BW Web template(running in 'Y' BW portal server ) as IFrame or URL Link in Webdynpro application ( Running in server X - WAS 2004s).
We had setup SSO between java stack of X to Java stack of Y. but when i open url link,it is still asking for password.
And i have enabled authentication = 'true' in the webdynpro application. user is present is both of the systems.
First of all can my webdynpro application issue login ticket to BW portal ? is this technically possible?
Thanks
Hari

You have Federation between these two portals?
regards,
Angelo

Error while executing the BW template from Enterprise portal.

HI all,
i need a help in resolving the issue. when i am trying to run the template(WAD) from Enterprise portal i am facing an error.
the error message is as follows
cannot load query ''query name'' (data provider "DP_1":)
Notification Number RSBOLAP 013
please help me out in resolving the issue.

Hi Ganesh,
actually it the scenario is some this like this i have created an WAD with email as an button up on click on the button it will execute the BI Broad Casting Functionality
He have published the template on to portal, the template is executing fine in Enterprise portal but upon button click we are perfectly invoking the broadcasting functionality but i am unable to send mail when i am click on Execute button.
The functionality is working fine from BW system .please help me out in resolving the issue.
regards,
santosh

Error when publishing web templates in the portal

hi Gurus,
I am getting this error when I try to publish my web report on the portal,
Field E_SX_META_DATA not a member of OUTPUT.
Can anyone please let me know how to go about fixing this error ?
Thanks in advance,
Nip

Hi,
You mean you want to execute the template even after this design time error. If yes then you can simply go to the backend and Transaction "SE38" then in the next screen type "RS_TEMPLATE_MAINTAIN_70" and then in the next screen type your template name ans then press "Execute" button to see temlate in Java Web.
Imran...

BI 7.0 Web Report and Enterprise Portal

Hi,
We have recently performed technical upgrade to BI 7.0
Now we would like to migrate web reports to NW2004s functionality. Is it necessary to configure inbuilt BI Portal before we can use web reports?
Best Regards,
UR

Hi,
take a look at this note which describes how to setup BEx Web in SAP NetWeaver 2004s. All required steps are mentioned. Additionally, this note contains a checklist to check the installation and configuration.
SAP NetWeaver 2004s: Setting Up BEx Web
SAP Note Number: [917950 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
In SAP NetWeaver 2004s, load is moved from AS-ABAP (BI-ABAP) to AS-Java (BI-Java). BI generates load on Portal (AS-Java), therefore BI users generate more load on Portal than normal Enterprise Portal users. See note 927530 for additional information about BI-Java sizing.
Which functionalities of BEx Web in SAP NetWeaver 2004s are requiring a Portal?
- New BEx Web Application Designer (Unicode, Command Wizard, ...)
- Exporting to PDF and Printing
- Integrated Planning
- Drag&Drop (Analysis Web Item)
- Web Items (Container Layout, Menu Bar, Tab Pages, Button Group, ...)
- Formatted Reporting with BEx Report Designer
- Document Integration with storage in Knowledge Management
For details, see Release Notes for Usage Type BI-Java under http://help.sap.com/saphelp_nw04s/helpdata/en/index.htm
If you don't want to use the new BEx Web functionality, you can still use BEx Web 3.5 Runtime that is running only with Usage Type AS-ABAP.
Take also a look:
[Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
Regards
Andreas

Problem with web template calling another template

Hi all,
We have a Web template which when gets executed displays result in table form.Now one of the fields in that table is Europe. My requirement is when i click on that field Europe it should execute another web template that was designed for Europe.How do i link this field to another template?
Please help.
Regards,
Suchitra

Hi Suchitra,
     You can't create link between a field and a query view. You can change your template by using the tab strip, so that each tab will give you the details of different country.
    Or else, you can use buttons to navigate from one query to the another.
Steps:-
Button -Right Click -Data Provider- specific command -select the query - ok
    You can also use hyperlink in BEx to move from workbook to the another.
Regards,
Yokesh

Problem with web template (WAD ) in BI7

Hi All ,
I have designed a web template where i have added a buttongroup which contains some buttons like open,save as, print,export to excel,filter,settings where in some of the buttons functionality is not working properly
Those are Filter,Open,Settings.
Iam not sure whether iam have choosen the right command for these buttons.Can any one give a solution for this.
Note :-These buttons functionality should be same like the buttons when we run a bex report in Portal ( we get all the above buttons in portal )
Thanks
Surbhi

Hi
thanks for your answer
Open will ask to open query vews .you can any bex report in portal and see how open button works if iam not clear.
The same functionality i need
Thanks
Surbhi

Problems displaying Web Templates in Enterprise Portal

Similar Messages

Maybe you are looking for