PS Budget Report S_ALR_87013558 shows negative available amount

Hi ,
We activated Availability control in our Project System. We created a project, WBS elements, network activities. Then setup the budget (WBS level) then release the budget. Purchase requisitions were made to PO items, some were receipted and some are still in Commitment. We also added the cost for Travel and Accomodation but haven't posted any actual cost for these network activities. Then when I generated S_ALR_87013558 the budget available amount shows a negative balance.
I already run CJEN to reconstruct the table, CJBN to recontruct the availability control balance but it still generating the same negative available balance.
We setup our tolerance limit to raise an error once the budget reached 100% but in this case it should already been triggered before reaching zero but it didn't happen.
Any solution for the problem is greatly appreciated.
From this going forward any cost that need to be added to the project triggers the error message BUDGET EXCEEDED! it supposed to been triggered before the negative available amount on the report was reached.
The report show that I have an amount presented on the following columns:
ACTUAL
COMMITMENT
REMORDPLAN
ASSIGNED
I already checked the individual network activities to checked if the balance showed in the RemOrdPlan is correct using the formula REMORDPLN = MAX(0, PLAN - (Actual+Commitment)) and it is consistent with the amount presented in the report.
thanks
sunil

Hi,
Some ideas :
1st. Try to check the history when the AVAC activated. It could be AVAC activated after PR/PO created.
2nd. Try run cj31. Compare the value there with the report S_alr_**** . If the value is not match , you should apply some notes. It could be your AVAC not working properly.
3rd. In order to prevent any futher issue for another project. Try to CJBW, CJEN and CJBN, for all projects (one time only). Put some budget on it. Next step do background schedule (CJEN after that CJBN) let say for weekly for all projects.
Hope can give you some ideas.
Cheers,
Nies

Similar Messages

Default setting for Budget Report S_ALR_87013558

Dear All,
In Budget Report S_ALR_87013558, when it is executed every time when we enter, 2 number formats are displayed, one in Lakhs (Factor 1,00,000) and one in units (Factor 1). When I change it to Factor 1 through "Number format", then it comes as per selection.
This is only in prod server, dev server is ok.
How can I make it default to normal for all users on client level, i.e. to Factor 1.
Thanks
Shubham

Execute the report, now change the number format as per your requirement, now after changing, Press Ctrl+S, this will save the setting to this report. so if you execute the report system will take the number format which you saved as default setting.

Prevent negative avail. amounts

Hi,
I need to avoid next situation:
In Funds Center X I have budget 100$, Exp. 80$ and avail. amount 20$.
I can post, via FMBB, budget document (proc.-ENTER) for minus 50$, for example, although I have only 20$ avail. amount. I want to stop this budget document by error message.
The same problem, but at actuals side, I solved via tolerance profiles in BCS, but budget side is not supported here.
I tried to use consistensy libraries but it does not help me.
Please advise.
Regards.

Hi Andryuha!!!
The AVC control should stop you from reducing the budget below the available amount. Try to reconstruct the AVC ledgers and see if the problem persits.
Consistency libraries could be of any use, if you do not have consumption in the budget line in question. Then, you can prevent entering negative budget. But when part of a budget has been consumed, AVC should issue a message.
Regards,
Eli

Crystal Reports Cross-Tab Report not showing all available fields

I am running CR2008 against MS SQL Express. I have several tables with fields and data in them and can create standard reports to show all the data in all the fields. However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
I created a standard report with all the fields I needed in my cross-tab report and ran a preview. Everything was there. I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

UPDATE: I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
I am creating the cross-tab through the Cross-Tab wizard. Is there maybe a bug in that? Is there a way to create it otherwise?

Budget Report to show the fixed and variable split for Materials

Hello Gurus,
Could you tell me if there is a budget standards report that will show the fixed and variable split for Materials? Example: Labor, Equip., QC and Overheads?
I need it for the correctly rolled-up 'final material number' step. The report that does this now (without fixed and var split) is the Indented BOM Comparison (sret - cost mgmt-product costing - cost mgmt-customized reports - cost estimate comparison - costed multilevel compare rpt - Indented BOM Comparison).
Thanks,
Jefferson

one simple way is in your final itab declare a slno type i field
data : begin of itab occurs 0,
slno type i,
<other fields>
end of itab.
after filling the data in itab.
loop at itab.
itab-slno = sy-tabix.
modify itab.
endloop.
in fieldcatalog also you have to define that slno field as the first column.
but it will change its order if you are sorting the output or filtering the output.
regards
shiba dutta

SQL Report not showing data - available in SQL Workshop and SQL Developer

I am having an issue with developing a SQL Report in APEX 3.2.1. I run the code in both SQL developer and SQL Workshop and I get data pulled back (both against my development environment). When I run the same code in a SQL Report region, it returns no data available. Does anyone have any idea what would be causing this? Other regions on the page accessing different tables in the same schema return data without issue. Any help would be appreciated.
Thanks
Freddie

Could you explain the last comment a bit more. Here is a bit more info just in case I touch on the info with it. The db schema is BPAMGR, the Workspace is BPAMGR. We use the same schema for all of our reporting. All of our tables are in the same schema. We don't use any tables outside of this schema. Our APEX workspace has been associated to only this schema. The tables are able to be queried by SQL Workshop in the same APEX instance that the report application is under.
Freddie

Show negative values as 0 in BEx Report

Hi Gurus,
I have a report which shows negative values for POs in BW BEx. The user wants all negative values to show up as 0 in the report. Is there a way I can show that as 0 in the report for all negative numbers easily.
Any help is deeply appreciated.
Thanks.

Hi,
Make a new formula and write a simple condition like this.
(PO value<=0)*0+(PO value>0)*PO value
Make sure to use boolean operators while writing this condition.If any issues get back to me.
Hope it helps.
Regards,
AL

Customer Receivables Aging showing negative $ amounts

My Customer Receivables Aging is showing negative dollar amounts as the balances, however if you drill down to the invoices they show as positive, as does the GL balance. any ideas why?

Hi,
Can you check the whether the following tickbox is checked or unchecked under :
Administration > System Initialization > Company Details > Basic initialization tab > Display Credit Balance with Negative Sign
The box "Display Credit Balance with Negative Sign" will be unchecked.
Also, check the following link :
https://websmp207.sap-ag.de/~sapidb/011000358700000456302007E.zip
Hope it helps.
Regards,
Jitin

Values are not coming in report S_ALR_87013558

Hi,
I am running the budget report S_ALR_87013558. In that report except budget column, other values are coming(Actual,Comiitment, remordpla, assigned,available)....
BUt I have assigned the budget..It is showing properly in S_ALR_87013557.
In S_ALR_87013228 report, available it is showing in negative.
How to rectify this issue?
Regards
Suresh

Hi Virendra,
Thanks for ur reply.
I have ran CJEN for the project. But still it is showing the same in S_ALR_87013558 report.
But the budget value is coming properly in S_ALR_87013557 report.
How to goahead???
Regards
Suresh

Internal activity material cost not displayed in report s_alr_87013558

Hi all,
I have an material attached to the internal activity.
this internal activity is inturn attached to a network
which inturn attached to a WBS.
After the PR and PO creation of the material attached
the cost report s_alr_87013558 shows values in the
WBS element not in the network activity to the material
was attached
How to catch the cost value to network activity instead of WBS elment
Can anybody have a clue why it is happening
Thanks and Regards
pv

hi sreenivas,
thank you for the suggestion
in budget report the actual and commitment value is pulled
to respective network activity or wbs element depending upon the account assignment category during the automatic PR
creation from CJ20n
In my scenario during automatic PR creation it is Q(project make to order) instead of N(network).
Can you throw some light to this where in
i can generate auto PR with account assgnment category N
for a material attached to network through internal activity
Note:
to catch the cost we also need to activate the cost rel indicator in purchasing doc tab for material in cj20n
regards
pv

Cost center budgets report showing double budget amount

Hi,
I entered $5000 as the cost center budget in t.code KPZ2 however in the cost center budget report S_ALR_87013648 its shown as $10,000 which is double of what i entered.
May i know why is this?

No answers yet

Budget Commitment Report - S_ALR_87013558

We have an issue with the Budget Commitment Report S_ALR_8701355 as explained below.
Org Structure:
A* Projects are separate small Projects to track Capital and Operating Expenses
But all the Capital Purchases are done only through C* WBS. And accordingly Capex budget is maintained only for C* WBS. So AWBS has been linked to 3 CWBS ( SW, HW & Dev SW) in one of the user field of C*WBS.
Shopping Cart will be raised using CWBS in SRM. But once PR has been created it replaces the account assignment field with AWBS. And later even the Asset posting happens only with A*WBS
Issue:
While using Budget Commitment Report - S_ALR_87013558, CWBS is giving Budget and A WBS is giving Actual cost. This Actual Cost pertains to 3 C* WBS Elements (SW, HW & Dev SW). So now Business requires to merge the cost of A* WBS with respective C*WBS Element.
We are able ascertain the cost of AWBS but not able find a logic to distribute this cost across respective C WBS.
Current Logic of the Program:
Any document posted using WBS Element will update table RSPCO with just Amount, Period & Value Type (Actual/ Budget / Plan) . So Budget Commitment Report S_ALR_87013558 will fetch the details from this table alone.
Could any of you please let us know how to deal with this problem without altering the existing Org structure .

Hi Rajesh,
I think the report is showing correctly as per the logic. But please elobrate us why the PR created with account assignment C* WBSE is replacing by A* WBSE.
If the account assignment in PR and PO is replacing by A* WBSE then obviously actual cost will book against A* WBSE and report S_ALR_8701355 will display the same.
you can post cost from AWBSE to C WBSE uisng KB15N.
Regards,
Nag.

Budget is not getting displayed in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
Please treat this as quite urgent.
Regards,
Manohar N

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Mismatch of Assigned Budget in CJ33 & Report S_ALR_87013558

Hi,
I would like to inform there is an issue in mismatch of assigned budget value in CJ33 wrt hierarchical report(S_ALR_87013558). Request you to suggest to fix the issue.
Thank you for your coopearation.
Regards,
Ranjan

Ranjan,
removing a column in a report will not affect at all at the values observed. Therefore,
it is unuseful to do it.
If there are inconsistencies in the assigned value, i suggest you to take the following steps:
1. Excute the report BPDIST03 via SE38 for the project in question.
2. Excute the tnrx CJEN.(Reconstruction of project information DB)
3. Excute the trnx CJBW.(Deactivate the availability control)
4. Excute the trnx CJBN.(Reconstruction of availability control)
5. Excute the trnx CJBV.(Activate the availability control again)
Hope this helps
Regards
Martina

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

PS Budget Report S_ALR_87013558 shows negative available amount

Similar Messages

Maybe you are looking for