Cost center budgets report showing double budget amount

Hi,
I entered $5000 as the cost center budget in t.code KPZ2 however in the cost center budget report S_ALR_87013648 its shown as $10,000 which is double of what i entered.
May i know why is this?

No answers yet

Similar Messages

  • How to SeeThe Cost Center Budgeting Report

    Hi Experts,
    I am preparing the scnario for Cost Center Budgeting,once we enter the details in the budgeting plan,,we will post to the cost centers as well.after that how can we see the Cost Center Budgeting Report....will it be available in S_ALR_87013611 or anything else????
    Regards
    Sap Guru

    You are right, i.e you can view the budget/planning  report from S_ALR_87013611. But some other reports are available to view the planning data like S_ALR_87013612, S_ALR_87013613, S_ALR_87013614 where you can view the actual vs planning data. You can view only planning data from KSBL, KSBP etc.
    Thanks,
    Regards,
    Ramnath V.

  • Cost Center Budget-Cost element wise

    Dear SAP Gurus,
    My client needs to create cost center budgets cost element wise. For e.g. Salary paid (code 430000) in Development Cost center (code 9901).
    We now use KPZ2 to create cost center budgets and KP06 for cost element planning. Kindly guide.
    Regards,
    Siva

    Hi Ramesh,
    Thank you for the reply. I did suggest them to use KP06 but they require some sort of validation when posting an expense (cost element) to and cost center.
    For e.g. If the travel budget for Marketing cost center is $1000, they need the system to prevent posting once that amount is exceeded.
    Any help in this regard would be appreciated.
    Regards,
    Siva

  • KPZ2 (Cost center budget)

    hi
    i have assine cost center budget in kpz2 US$ 100,00/-
    client requirement is to sent an information message when budget is consumed 90%. i have checked in detail but find that there is no check on cost center budget avaiablity control.
    then what is benefit of this transaction. 2ndly let me any solution.
    Moderator: This thread has been locked due to double posting.
    Please refer to the Rules of Engagement.

    Hi
    Check OSS Note:68366 for work around solution.
    The standard SAP R/3 System has no active availability control for cost centers. You can exceed the cost center budget without corresponding messages.
    Check OSS Note:101030
    Regards

  • Cost Center budget control - Urgent

    hi all,
    It very urgent.
    Can any tell me the steps in configuring cost center budget & availability control system in ESS 5.0
    Thanks,
    Chandru

    Hey Chandu,
    budgeting is possible in Costcenters. Availability control is not possible. It can be done only for internal orders.
    Availability Control helps you to recognize if possible budget overruns in time and can automatically trigger different actions & you configure availability control for each budget profile.
    And this is activated only at internal order level not at cost center level.
    If you want to budgeting for cost centers, goto KPZ2. But here U cannot do it cost element wise. U can do it cost center wise for each period. If U want it at cost element level do it using KP26.
    Later U can draw the report using Information system plan/budget/actual variance report.
    Hope this helps you
    regards,
    chaitanya

  • Compare the 'Cost Center' Budgeting & Payroll Information

    Hi Experts,
      Our R/3 is configured on FI & HR and
    Our BW Reporting requirment is to compare the 'Cost Center' Budgeting & Payroll Information
    Is there any Business Content Solution for this
    Thanks

    Hi,
    Then create Multiprovider on Cube mentioned by Teja and Payroll cube.
    If the cube 0CCA_C11 is not giveing budget values, then take a look on the data source 0CO_OM_CCA_7.And then create a Cube for uploading data from 0CO_OM_CCA_7.And then create a MP on payroll cube and this cube.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

  • Flow For Cost Center Budget

    Hi,
      i need to configure the cost center budget scenario.can anydbody provide me the details on cost center budget...process..points will be assigned.
    Thanks
    Sap Guru
    (He Know's Nothing)

    hai,
    KPZ2 is cost center budget here you can give the budget value based on cost center. KP06 is planned value, here you can give cost center wise and GL wise.
    govind.

  • Too many objects in overview screen- Cost center budget

    Hey Guys
    I am trying to upload cost center budget with help of form based kp06. The system throws error that i cannot post more than 9999 cells at one time. is there a any workaround this?
    Thanks
    Ankur

    Hi Ankur,
    the upload is limited to 9999 cells, so you could create your layout which excludes the unnecessary cells. That would give you some more lines to upload.
    The other real option is to either upload the budget with an LSMW or get a program in place which loads it with a liitle bit more comfort.

  • Cost Center Budget - Availability check

    Hi !
    Can you tell me what is the procedure to get  * Cost Center Budget - Availability check *
    Regards,
    Ben
    Moderator: Please, search before posting

    Hi,
    Budget and Availability control is available for Internal Orders.
    For cost centers, i dont think this is available.
    Thanks,
    Ravi

  • Cost center budgetting

    Hello,
       Can anybody provide some detials on cost center budgetting or any kind if material related with this, as I will be starting a project in few days and cca budgeting is a small portion of it and i have never worked with this .
    thanks, points will be awarded

    Cost Center budgeting or planning?
    Budgeting is limited w yearly figures only, planning is monthly possible.
    Check http://help.sap.com/erp2005_ehp_02/helpdata/en/08/5149cf43b511d182b30000e829fbfe/frameset.htm for more information
    Regards,
    Hein

  • Cost center budgeting

    Respected Gurus,
    what is the procedure of budget consideration in cost center,types of budgets.
    regards
    jana

    kinldy check the sap note SAP Note 68366 - Active Availability Control for Cost
    Centers
    Symptom from SAP note as cited above
    The standard SAP R/3 System has no active availability control for cost
    centers. You can exceed the cost center budget without corresponding
    messages
    Solution part of sap note
    The SAP R/3 System's active availability control is for individual
    measures, meaning job orders and WBS elements only.
    If you want availability control for postings to cost centers, use the
    following indirect solution for primary postings:
    o Create a statistical job order for a cost center or cost center
    group and enter the cost center budget as a budget for this job
    order. Then activate availability control for the job order.
    o By using a customer-defined substitution in CO (transaction OKC9),
    you can ensure that the statistical job order is posted
    automatically if a manual posting is made to one of the cost
    centers. The budget of the statistical job order is checked during
    posting. If you exceed the budget, a corresponding message appears.
    - Note: Substitution does not work for automatic allocations --
    assessment, distribution, imputed cost calculation, and so on.
    If you use Release 3.0D or earlier, also refer to note 45226.

  • Preparation of cost center wise report

    hello experts,
    I want to know the tcode for cost center wise expenses reports.
    i have tried the ksb1 but it is working only for one cost center at a time.
    i want to prepare the cost center expenses report for all cost center in company in following format.
    cost center
    Amount
    what procedure should i follow?
    Please help.

    You can use KSB1 but create a Cost Center Group with KSH1 to make it easier.  You can also create a group of groups to form a hierarchy so you can analyze at different levels.  Hope that helps.

  • Vendor - asset - cost center wise report

    Hi Friends.
    Good morning,
    Please let me know vendor,asset  and cost center wise report ( ie for all vendors at a time.)
    Regards
    Srini

    Hi,
    From T.Code: AR02 you will derive your expected report.
    for vendor select dynamic selection and select ORIGN DATA Tab here you will get vendor field.
    Regards
    Viswa

  • Cost center  summary report

    Hello,
    I have to create one Cost center summary report.
    I have not found line item cuve but not summary.
    Is any one have any document in that.
    Thanks in advance
    Thanks
    CPY

    You can use 0CO_OM_CCA_9, 0CO_OM_CCA_1 data source for cost center line item reports.

  • Changed e-mail password, showing double the amount of e-mails

    I recently changed the password on my Comcast e-mail account on my iphone . When I get a notification that I have new e-mails, it will show double the amount of new e-mails that are actually in my inbox. Ex: the icon may show 10 new e-mails, but I really only have 5 in my inbox.
    Any suggestions?

    Hello DRB1962
    Check to make sure that you validated the device within your account on webmail.
    iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
    http://support.apple.com/kb/HT1694
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • Service Master Upload way

    Can anyone tell me what is the way to upload service master?? I have created simple LSMW for the upload but it works in foreground only.In background it gives an exception error

  • Where are the 6-core Mac Pro at 3.33GHz in the 'store'???

    I'm trying to configure a 6-core Mac Pro at 3.33GHz with some extras but, it's nowhere to be found at the online store!... What gives?? Thanks

  • ALV output is 2 decimal places, but prints as 3

    Hi, In my current ABAP program, the output is shown as 2 decimals, using the following domain: Data Type: QUAN No. Characters: 13 Decimal Places: 2 Output length: 17 However, during unit testing, it was found that during printing, instead of printing

  • Modify logging parameter of a lob

    I have a table as defined below (table a). I want to change the logging of the lob (DATA) from nologging to logging. I use the alter command: alter table a modify lob (DATA) store as (nocache logging); This doesn't work. I've tried numerous variation

  • Record and display data

    What I would like to do is: display a data point every 1 sec but record the a data point every 10 sec. I have been playing with the event case and loops to achive these but no mather what I get one or the other; I either record and display every sec