Internal activity material cost not displayed in report s_alr_87013558

Hi all,
I have an material attached to the internal activity.
this internal activity is inturn attached to a network
which inturn attached to a WBS.
After the PR and PO creation of the material attached
the cost report s_alr_87013558 shows values in the
WBS element not in the network activity to the material
was attached
How to catch the cost value to network activity instead of WBS elment
Can anybody have a clue why it is happening
Thanks and Regards
pv

hi sreenivas,
thank you for the suggestion
in budget report the actual and commitment value is pulled
to respective network activity or wbs element depending upon the account assignment category during the automatic PR
creation from CJ20n
In my scenario during automatic PR creation it is Q(project make to order) instead of N(network).
Can you throw some light to this where in
i can generate auto PR with account assgnment category N
for a material attached to network through internal activity
Note:
to catch the cost we also need to activate the cost rel indicator in purchasing doc tab for material in cj20n
regards
pv

Similar Messages

Planned material costs not seen in reports

hi to all,
i planned costs for a project using networks and activity elements and material components. for the activity elements i placed the costs as a direct input and for material components, i input the required quantity and the material number. However, when i looked at the structure overview(CN41), the materials i placed have 0 cost. YET THE TOTATL AMOUNT in the network&activity INCLUDES the cost of the material (quantity multiplied by material price).
Thanks in advance

hi again..
i checked both your suggestions but they have already been carried out earlier so the problem lies elswhere..(but at least i was able to eliminate some of the possible causes..).
allow me to give an example of whats happening in my case..
MY INPUTS:
WBS 1
NETWORK 1
ACTIVITY 1
     Material Component 1     3 pcs ( 1 $/pc)
     Material Component 2    10 pcs   (1 $/pc)
     Element 1(cost)             500 $
     Element 2(cost)             300 $
OUTPUT REPORT:(CN41 - Project cost Sch 000)
WBS 1                                  $ 813.0000
NETWORK 1                        $ 813.0000
ACTIVITY 1                          $ 813.0000
     Material Component 1           0.0000
     Material Component 2           0.0000
     Element 1(cost)                    500.0000
     Element 2(cost)                    300.0000
So if you notice in the report the material is 0 but the total includes the material cost..
thanks!

AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

Hi experts,
I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
thanks nd regards,
venkat

Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
However on repoeting side, you can restrict the values to # and exclude everything from slection. But not good solution as such.
Regards
Pankaj

Budget is not getting displayed in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
Please treat this as quite urgent.
Regards,
Manohar N

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

He material is not displayed as valuated Sale Order Stock

Sale Order has been created and MRP execution is done at MD04.
The Sale Order is released as Production Order.
But when I am executing T Code MBBS I am getting error message syaing
The material is not displayed as valuated Sale Order Stock.
Diagnosis
The system has not found any stock that satisfies the selection criteria entered.
Possible reasons for this are:
The material does not exist. Have you entered the right material number?
Your selection is too restrictive. The system was not able to find any stock that satisfies all selection criteria.
The stock balance is zero.
Procedure
Check all the selection criteria you entered.
Stock overview has displayed enough stock for material.
Please adivse me how Material can be displayed as valuated Sale Order Stock at MBBS.
Regards

Hi,
Check whether the Production order execution is done and any GR has been done against the Order.
Once the above is done, check in MBBS, the stock will sit in the Valuated SO stock.
Even wait for any other replies.
Thanks & Regards,
Ravi Kumar

Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

Formula not displaying in report

Hi ,
I have used the NODIM data function in my formula and now the report is not displaying the formula column in report in first screen. I have to select the filter value from structure.
I have already made the formula as Always show , still its not displaying.
I have tried creating the CKF and that too is not displaying in report in first screen. I always have to select it from filter.
What could be the reason..? Are there any query setting I am missing..?
When I use the KF , it is displaying properly.
Please help.

HI,
AS YOU SAID U R CREATING FORMULA USING NODIM FUNCTION IF U R CREATING AT INFOPROVIDER LEVEL THAT IS CALULATED KEY FIGURE , AFTER CREATING CKF U JUST DRAG CREATED CKF TO COLUMNS AREA AND SAVE AND EXECUTE, ITS DISPLAYS THE KEYFIGURES. U ARE JUST CREATING FORMULA FOR KEYFIGURE NOT CHARACTERISTIC SO NOT THOUGHT OF FILTERS.
HOPE THIS HELPS .
Regards,
supriya.

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Material cost not getting displayed in CN41N

Hi Gurus,
When we execute CN41N, Materials assigned to the Network activity are visible but the cost of each material is not getting displayed against it (under Proj. Cost Plan Column) and it is appearing as '0' whereas, it is appearing as an accumulated cost against the activity. I checked SAP notes for this problem, though I could see some notes which are very close to the problem but all are for Release 600 whereas we are using 604 (ECC 6.0). Have anyone encountered such problems or whether the cost will not appear against Material in CN41N.
Awaiting your valuable suggestions.
thanks in advance.
Vinodh

I have seen planned cost of material against material itself in structure report like CN41, CN41N under following conditions:-
1. Valuated Project Stock
2. Material is created using Reservation for WBS or PR+Res for WBS Procurement indicators.
3. Costing relevancy box ticked for material
4. Statistical Cost element exists for Inventory account.
I have not seen planned cost for non-stock item or material with res for network in project. This is purely based on my experience and I dont have any notes or help document to validate my statement.

COPA - Planned Material Cost not appearing in KE30 report

Hi all
In COPA planning, I manually planned the Material cost (Material External Price) along with the Sales Quantity and Revenue for two company codes (one plant in each co code). But in KE30 report, I could see the material cost (MEP) values only for one company codeplant. What could be the issue?
I even tried valuation in KEPM. Valuation step is calculating and populating the material cost in KEPM, but the values are not flowing to KE30 reports. And this happens to only one of the two company codes.
Thanks
Vamsi

Hi Vamsi
Please check table CE2XXXX, where XXXX = Op Concern.... Here, can you see the plan line items??
If yes, then the issue is with your report definition in KE30... May be you are restricting values display in KE30 report by virtue of your selection parameters
br, Ajay M

Raw material cost not coming KE30 profitability report

Dear Gurus,
We have two material type for our finished product for one material type without having cost release for current period we can't release the billing document for accounts but in other material type we can release the billing document for account without releasing the cost for current period.
This occurs with problem that in KE30 we are not receiving the raw material cost & administration cost. Please suggest what should I do to correct this?
Thanks in advance.

Hi,
I already assigned costing key to material type (FERT,HALB) but bifurcation of COGM not flow to CO-PA.
In T.code KEPR
1.All F/V i maintained as 3 is it ok or i need to maintain it 1 or 2.
2.In T.code KE4J
Record type = F i maintained for FERT,HALB category materials & assigned in Costing key
Earlier before release i assigned in T.code ke4i
Condition type Value fields
VPRS Stock value
Then some value flow to copa
After i release i removed stock value from ke30 report and added material cost ,sub contracting cost,material overhead but no value flown CO-PA.
Pl check
Regards,
Debashis

Internal error when try to display Interactive Report

Hello Gurus
I'm facing problem with displaying Interactive Reports in Web GUI (CRM 2007). When I try to open existing report or new created one, I see on the display area error "Load failed, Internal error" (no other system errors)
I think all configuration is done well, I have checked it by reports: Z_OLTP_CONFIG_CHECK and Z_OLTP_CONFIG_CHECK_BI, and except error DataSource /CRMBW/BOOL_TEXT is not active, everything is ok.
By the way - how can active this data source, while I can't find it anywhere, even in repository (RSA5)?
I thought maybe problem is with my browser or Flash player, but other functionalities uses flash work good (ie. key figures).
Any hints?
Best regards
Lukasz

Hi Łukasz ,
the answer: CRM Interactive Reporting- "Load failed, Internal error"
Pzdr,
Mateusz

Target costs not displayed in process order

Hi,
We have set up a small PI scenario. The issue we are facing is that the target costs are not displayed in the order. Actual costs appear after confirmation, but target costs appear as zero.
We have maintianed cost relevancy in work centers, defined valid activity types, maintianed price in material master for all components and also run the standard cost estimate and released it.
Please let us know what we are missing and why this error could be happening?
Thanks in advance,
Ashok

Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order,
You need to define the following,
1. Variance Key - Transaction "OKV1"
2. Assign that to Plant using "OKVW"
3. Define Variance Variant using "OKVG"
4. Define Valuation variant for WIP/Scrap calculation using "SPRO"
5. Define target cost version by assiging sl no 3 & 4 and also how the cost calculation should be used.
Once this activities are completed, execute production/process order and then after goods movement and some confirmations process Variance using "KKS2" as a period end activities.
Edited by: sarin toms on Dec 2, 2008 2:26 PM

Internal activity material cost not displayed in report s_alr_87013558

Similar Messages

Maybe you are looking for