Question about lost linked files

I have an illustrator PDF with a linked photoshop PDF as the background, but have lost the linked file on my HD. The background image still appears when I open the illustrator PDF in acrobat and photoshop, but not in illustrator because it cannot find the linked document on the HD. Is there a way to extract the background from the illustrator pdf, so I can have a file of just the background that I can then re-place on the illustrador PDF?

When you open the PDF in Photoshop, the dialog should have two tabs. One should be Images. See if the image shows up there. If it does have Photoshop open that image and resave it anywhere you want and then relink it.

Similar Messages

Question About Broken Link

How do I determine the cause of an item being placed in the broken link list after doing a site check?

Rick and Ben:
You have been very patient with me
Guess at 81 I am starting to lose it - the code and screen shots I put in my email apparently did not make the trip
I will study how to use the forum tools and get back to you if I grasp the procedures required
Thanks again
Tom
Date: Thu, 19 Dec 2013 07:49:50 -0800
From: [email protected]
To: [email protected]
Subject: Question About Broken Link
    Re: Question About Broken Link
    created by Rick Gerard in Dreamweaver support forum - View the full discussion
You are trying to post code from an e-mail, that won't work. You ahve to be on the forum and use the tools there to post code.
Copy and post the suspect code and we can help. Otherwise we are completely guessing.
From what Ben says you have a typo or some missing files on your server.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5944607#5944607
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5944607#5944607
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5944607#5944607. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Basic question about importing wma files

Hi, I have a basic question about importing wma files. I ripped some cd's on a Mindows computer using Media Player, but now want to copy them to my Mac and use them in iTunes on my Mac. when I use Import in iTunes, nothing happens and I cant even seem to copy them one by one using the Music folder.
Can someone help me?
thanks
eMac Mac OS X (10.4.4)

iTunes for Mac doesn't support .wma files.
If you can use a PC to convert them, you can use one of many freeware applications. Google for 'wma to mp3'.
For the Mac there's the shareware program EasyWMA that can convert them.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Some questions about importing HTML files

Hi, folks
Let's suppose we want to import a pack of HTML files formatted in HTML5 wit's it's CSS into a double-oriented folio. A couple or three questions about that, please:
1. Is there a limit for a reasonable quantity of HTML files I can import into a folio? I mean.. 100 would be way too much, for instance?
2. These HTML files could be navigated and referenced from inside TOC-pages made in InDesign,right? (navto://..., I gues?)
2. Will it be possible, by means of HTML adaptative design techniques, to treat both orientations (vertical and horizontal) as different viewports or screen sizes so that the design adapts for instance the column width with its CSS?
3. That said, will the InDesign final app. respect that adaptative CSS rules?
I am asking this because we are looking for a way to inject big quantities of content with a very similar design into our application in a really fast and automatizable way and I have the suspicion* that importing HTML5 preformated CSS files could be the a very good and simple alternative to importing XML into InDesign templates as we start out content as tagged almost-html files.
Thanks a lot
Gustavo Sánchez (Posting from Madrid)

I assume you are asking about using HTML articles.
1. There is no limit beyond simply keeping things reasonable.
2. Yes. Just use navto://articlename
3. Yes. I've used min-width of 768 and max width of 1024 to control it.
4. InDesign does not enter into any of this with the exception of using the folio builder panel. Everything else is done in Dreamweaver or whatever program you decide to use for the article.
If you want to restrict the HTML articles to one orientation or the other, use the _h and _v suffixes.
Bob

Few Questions About Backing Up Files

Okay, I'm pretty new to this, and have checked the support pages, but I do have some questions about backing up my files.
I'm running out of room on my computer's hard drive, and am wondering if burning the library to CDs will allow me to quickly restore my library on my computer when I sync my iPod.
I know that when an iPod syncs with a comp, it will lose any songs that aren't on the library list. (If I deleted some songs to free up room, I'd lose those songs on my iPod when I synced it up.) Is there a way to prevent that from happening? Some way to save a headache continuously restoring my iPod's library every time I want to add a new song or recharge it?
I'm on Windows XP, if that matters.

Best and easiest solution is to buy an external hard drive. Then simply drag and drop your iTunes folder from your internal onto the external and copy the entire library.
Patrick

Question about calling batch file by using the System Exec+.vi?

Hi
I have a problem about calling batch file. I know that the system exec is equivalent to "run" in Windows. I called the batch file c:\rtxdos\bs\ch0.bat successfully in the "run" but it didn't work in the LabVIEW program. The dos prompt had an error message "Bad command or file name" and it just happen when I call this batch file in LabVIEW. Why?
Bill.

Hi,
Try to set the "working directory" parameter of System exec.vi to the directory where the batch file is located. It may help.
Good luck.
Oleg Chutko.

Dumb Question: Adding a Linked File

I'm an ex-Frontpage dillitante and new to iWeb. I want to add a bunch of linked files, i.e., I have 28 files I want the user to have access to via a click. When I drag them into a page, I get a little snapshot of the first page of the doc instead of the filename as a link. What am I doing wrong?

If you want the files to be downlloaded immediately when the link is selected zip/compress them and link to the zipped file.
If the files are pdf files and you don't zip them they will attempt to open in a new window. However, some browsers requrire a plug-in in order to view the pdf file. Plain text files will open the the browser window.
If you haved a lot of files you intend to add to a single page it would be more expedient to upload them to your server and link to them there as you would to an external webpage. That way iWeb wouldn't have to upload them itself when you publish the page. It's just a more efficient method.
OT

Questions about updating linked .ai files

I have two questions regarding linked images.
(1) Sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save the changes in Illustrator. In other words, I do not need to update the link in the ID links panel. Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links panel to see the changes. Is there a reason why this happens, and is there an easier way to update images than the links panel. In Quark, I could just double-click on the image and a dialog box would ask if I wanted to update the image. This isn't a big deal to me, but I thought I'd ask.
(2) Whenever I make a change to an .ai file, the linked image in InDesign always re-scales, and I can't figure out why it does so or how to make it stop doing this. For example, I placed a bar chart made in Illustrator in a frame and adjusted its +x and +y values. It came in at 100% scale and I did not change that. Then, I had to make a change to a text label on the chart, which made the graph slightly smaller. When I updated the link in InDesign, it was re-scaled to 118.12%. I had to go into the +x field in the control bar and type in 100% to get it back to the scale it was before. Is there a default setting I need to uncheck to turn this feature off? If not, is there by chance a simple keystroke that will let me re-scale the image quickly?
Thanks in advance for your help!

1. It sounds like you sometimes select the art or thename of the link and choose "edit original" and sometimes you just open the art and make changes. If you tell ID to edit original it updates at the save.
2. There are two options, depending on version, for the relink behavior and scaling. In CS5 (and CS4 if I remember correctly), you have a choice between them inthe prefs, in earlier versions it's one or the other, depending onthe version. One option is to preserve the dimensions, which is wha'ts happening to you. The other is to preserve the scale. Exactly how preserving dimensions behaves depends, too on the cropping options you used when placing the .ai file. If you cropped to aret or bounding box, for example, changing the size of the art or removing a stray point affects the art or bounding box, but cropping to media would not change.

ANOTHER question about moving referenced files.....

After reading through most of the posts I could find, I am still not finding the answer to my question. I assume it's simple, but I'm a (second-guessing?) LR2 convert, and while I love Aperture's UI, I'm really struggling with file management.
Here's how I like to work. Insert card into reader, and copy the folder (100CANON) to my desktop. Open Aperture, import all the photos from their current location. I like to edit, keyword, rename, etc at this point.
Let's say I had 10 photos in that folder, 5 of my dog, 5 of my car. Here's where my confusion begins:
I want to select the 5 dog photos, and move their physical location to my Pictures/Dogs folder on my hard drive, as well as to my Dogs project in Aperture. I try 'Relocate Master', which moves the file to the desired path on my hard drive. Unfortunately, the thumbnail still resides in the 100CANON project.
So therein lies my question, if I want these dog photos in the Dogs project I now have to drag the thumbnails from the 100CANON project to the Dogs project.
That seems like extra steps, and I can see that causing a lot of confusion, especially when trying to sort a folder with images that need to go in several different projects. I can't help but think I'm missing something obvious - why can't I go into my 100CANON project and drag the thumbnails to the appropriate project, and have the finder path update as well?
Save the "you should let Aperture manage your files" discussion, I'm not interested in that. I need to use referenced masters.

JF wrote:
what do -you- do with your photos when you import them?
I take the CF card and Finder-copy the contents to a hard drive where they will ideally live forever. Then I eject the CF card (very important error-avoidance step). If the folder contents are not a single shoot at this point from the Finder I review the folder to see if I want the images to comprise more than one project; if so, each project is split into a separate folder with its own name.
Next I back up the folder of images which is labeled something like "101113Buckleymstrs." 101113 is 2010/Nov/13, Buckley is the job/project/event and mstrs indicates those images are the Masters. The backup folder is named "101113Buckley_mstrsbkup."
Note that at this point and forever I can Finder-search for the date or for the job/project/event or for mstrs or for bkup to find images. No Aperture involved yet. Also note that the year/month/day format at the start of the file name properly alphabetizes the folders by date on the hard drives. Most of the files on my hard drives are done that way.
Next I start to import into Aperture by reference into a new Project named "101113_Buckley" using the exact nomenclature used for "101113Buckleymstrs" except without "_mstrs" appended. If Aperture irrevocably lost the link to the masters I could Finder-search on the "101113_Buckley" and find them. At this step before import I review the pix Aperture is set to import and uncheck any obvious duds before clicking to import. The duds remain in the masters and backup folders but I do not care because hard drive capacity is cheap while my time and improved error avoidance have significant value.
I always shoot RAW+JPEG and sometimes I make two Aperture Project imports, one of the RAWs and another of the JPEGs: "101113Buckley_mstrsRAW" and "101113Buckley_mstrsJPEG."
For specific issues like "dogs" I use keywords to create Albums. Or if Buckley is a construction project, for instance, over time multiple Aperture Projects related to the Buckley construction will be created, all of which will point to a Buckley Construction Album. Other albums might be "Buckley Site Work," "Buckley Foundation," etc. Albums are very powerful and take up essentially zero space because they are comprised only of pointers.
I assume you're letting Aperture manage them? I think the issue is that I'm not ready to let Aperture take control of my library.
I manage every image very intentionally, using the tools Aperture makes available.
Do you have random folders strung out all over your Pictures folder with the various imports you've done over the years?
Folders are not random. They are sequential (which is how photos by definition always occur) and they are named identically to the corresponding Aperture Projects as noted above.
It boils down to this for me. I have preferred being able to navigate a file structure within LR to find that one image I'm after. Yes, I realize I could search for it by keyword, whatever, but sometimes I might not even remember how I categorized it. I used to do commercial interior shoots, and had them labeled by address. It's nice to traverse a folder hierarchy if you need to, and it seems like if I turn over control to Aperture I'd be giving that up.
I understand the need some folks have for what I call "film-think" or "folder-think." If you must use folders IMO best is to do it with the Masters before going into Aperture. Within Aperture IMO folder-think is debilitating to optimal use of the images database tools.
I analogize each Aperture Project to a roll of film that occurred at a point in time (an hour or a day or whatever). It gets dated and named in the hard drive archives and in Aperture. Aperture's pointers and key words allow us to create an infinite variety of Albums without relocating the hundreds of original Projects/Rolls of film.
HTH
-Allen

Questions about IDoc to file scenario

I 'm confused, and have a few questions:
1, we need to define a product for it at least , assign it to either of the systems?
2, we don't have to configure an IDoc communication channel, do we?
3, does the receiver system (file/ftp) need a logical system? and define it by t-code BD54, in XI or R/3?
4, at least define techinical system and business system for R/3?
Can you explain the sld configuration to me ?
thanks a lot.

Hi,
,1) we need to define a product for it at least , assign it to either of the systems?
    Ans: Yes we need to define a product.
2, we don't have to configure an IDoc communication channel, do we?
Ans: Sender agreement and Sender IDOC communication channel is not required as IDOC adapter
        resides on ABAP stack.
3, does the receiver system (file/ftp) need a logical system? and define it by t-code BD54, in XI or R/3?
Ans: For third party system from ID create the business system and use that Business system for File or
        FTP system.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Business System have an entry in the SLD and Buiness Service do not.
Business Systems are used when you are sending data to and from an R3 system and can be of ABAP, JAVA and Third Party Types.
Business System is a logical representation of a Technical System.
Business Service is a abstract representation of a System. For instance, www.google.com have a several system working together and IPs of this machines change eventually. When we use a Business Services like google we reference a computer that we don't know the phisical implementation.
4, at least define techinical system and business system for R/3?
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Ans: Yes : Technical system is a phisical machine, it have a IP. Can be a BBDD, ERP, J2EE ......... a Business System is a logical term that we use into the Business Scenarios and represent these Technical System that we had created.
Can you explain the sld configuration to me ?
SLD is the place where u can define systems that are existing in ur landscape. using these systems u can transfer data from one system to another using PI.
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak - SLD preview
SLD - http://help.sap.com/saphelp_nw04/helpdata/en/6e/fba1c735e0b44496072595092d924c/frameset.htm
Error while reading ID of own business system from the SLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f8bd90-0201-0010-dd9a-c8a7f52c47aa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00e7efc-0f27-2a10-d9a2-c46fc3863c20
Check this out
http://help.sap.com/saphelp_nw04/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
Log into SLD and click the Help Link
You will get the detailed documentation for SLD for your version
Thanks,
Satya Kumar
Reward if it is useful
Edited by: SATYA KUMAR AKKARABOYANA on Apr 24, 2008 12:30 PM

Question about replacing corrupted file in windows 7

hi,
I read in windows 7 bible that if a system file is corrupted , I can replace it with system recovery tool (at command prompt) if I have onother computer with windows 7 installed.
my question is here , if I replace any file with copy the file from computer to dvd and replac it on my computer , does the windows version must be the same for 64 bit or it doesn't a matter.
thanks
johan
h.david

Hi,
Yes, the version must be the same. You may be able to get a known good copy of the system file from another computer that is
running the same version of Windows with your computer. For different versions there may be different configuration settings in the files that you operating on which if replaced with the wrong version might cause new issues.
More information regarding How to manually replace a corrupted system file with a known good copy of the file, please check it in the link:Use
the System File Checker tool to repair missing or corrupted system files
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Question about media player files on websites

Hi, I'm a mac newbie (3days now) and loving it. Starting to think why did I wait so long. Anyway exuse me if my question sounds dumb. Sometimes when I'm on websites windows media files won't show up. Do I need some type of download or plugin?

Well those are both odd. Office programs would not open anymore even though Flip4Mac did NOT install?
I have Mac OS X 10.3.9, QuickTime 7.0.4 and Office 2004 - and I haven't seen those problems.
Try logging in as a different user (if you don't have another user account, you can create one Apple menu > System Preferences > Accounts > + ) and see if Office apps work in that account and also if the Flip4Mac installer works there. If it works there, then you have some preference file weirdness in your own user's Library folder.
If Flip4Mac still won't install, you could also try manually removing the Windows Media Player browser plug-ins from (your hard drive)/Library/Internet Plug-ins and / or try installing the older version 1.0.2 of WMV Player. The link is at the bottom of this page:
http://www.flip4mac.com/wmv_download.htm
Then try reinstalling the newer 2.0.2 version if that worked.

Question about changing a file type into another file type

Hello. This isnt a java question but you guys have been so helpful in the past I hope its ok if I ask this question for a friend.
How can I import a scriptware file into Screenwriter 2000, or change a .scw file into a .tag file?
Anyone who can help thanks.

I know nothing about scriptware or Screenwriter. But, my only advice is to see if Scriptware can export some other file type (not necessarily a .scw file) that Screenwriter can read. Sometimes, when I have two text editors whose native formats are incompatible (like opening a paper typed in a new version of Microsoft Word using an old version of WordPerfect or something), I save the file as an RTF file, rather than in the native format. Maybe something like that applies to your situation, too.
Hope that helps.
Jason

OSD: different pxe, question about different wim-files

Hi,
Please see this question, I'm somewhat confused about the different
wim files.
I can see the default winpe.wim and a different wim next to it which has name winpe then environment then number (winpe.sccm0022.wim), what is this file.
And, like in my post, why can't I use this image to import into a pxe and boot from that?
Please advise.
J.
Jan Hoedt

Hi,
What is your goal with this? boot to SCCM and do OS deployment or what is your purpose? when dowloading the boot .wim file from a DP parameters are passed along like MP and so on. So you cannot use that .WIM file and pxe-boot from another PXE solution and
do OSD from ConfigMgr.
That is why Johan's unsupported solution would be the way to try it.
http://www.deployvista.com/Blog/JohanArwidmark/tabid/78/EntryID/54/language/en-US/Default.aspx
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Three questions about signed jar file and applet

I use three signed jar file. Each of them signed by different certificate. First of JARs contain applet class. When I start applet from html page I see message “This applet was signed by…… but Java cannot verify it… Do you trust…?”. All times I press “Yes I trust” and after this questions applet stop to work end exit. If I use only one certificate for signing of three JARs then applet continue to work after question. 1) What should I do to fix this bug? 2) Is it any method to check from applet that user press Trust button? Is it any method to emulate work of SecurityManager to check that Certificate object is trusted (I want do call some method check(Certificate) and if certificate is not trusted I want to see message with question: “Do you want to trust this certificate” and so on)?

Hello Jarman,
1. If I have a signed jar file, then as long as the
certificate is recognised as trusted that applet can
run as a fully trusted application on the client
machine. So I should not have to add lines such as
permission java.lang.RuntimePermission
"readFileDescriptor", "read" ;
permission java.lang.RuntimePermission
"writeFileDescriptor", "write" ;
to my java.policy file. true/false ?true
2. If I am running a signed jar file in the Java
plugin then I do not need to have a verisign or thawte
certificate (however to allow my certificate to be
accepted I do have to import it into the cacerts file
on the client machine). True/false?true
3. Following on from question 2, if I want to be able
to run an applet on a client machine, without messing
around with ANY files on those machines, I need a
verisign or thawte certificate. True/false?true
4. (And finally) Apart from a security exception
saying that I need to add one of the lines like those
of question 1, is there any way I can get other debug
information as to why the signed jar file is not being
recognised as signed?No. This could be a problem of importing your certifcate into the wrong place.
The information on the following link is a little bit dated but it helped me to successfully install a testcertificate and sign an applet with it.
http://www.suitable.com/Doc_CodeSigning.shtml

Question about lost linked files

Similar Messages

Maybe you are looking for