Quickpaint reports not working with assignment set defined with criteria

Hello,
I have a problem with quickpaint reports in HRMS. When i run quickpaint report against assignment set defined with criteria it reports following error: APP-PAY-06867 An error occurred during formula execution FFX00_DATA_NOT_FOUND (assignment criteria was &ASG_LOCATION=New York).I defined several assignment sets with different criteria and i always get the same error when i run any quickpaint report.
The same Quickpaint report works well with assignment set defined by including individual assignment.
Thanks in advance!
best regards

Thanks for uploading the sample reports.
I am not abe to reproduce the issue and the graphs generated in both the attached reports are the same except that the width of the graphs being displayed are different as seen in the below images.
ATML 5.1 Report Graph
XML Report Graph
Regards
Srivinayaka Pandurangan
National Instruments
With Best Regards,
Srivinayaka
National Instruments

Similar Messages

Java Reports not working in CUE 7.1 with Java 8, update 25

I'm using CUE 7.1 and under the 'Reports' menu there is a 'Real time Reports' selection.
This came up with a Java window and allowed a number of reports. I've found it quite useful and even found an issue with it.
It now longer works- I'm not sure which Java update may have broken it. I'm using 8 update 25 currently.
Any ideas?
Mark

I had a similar problem with a different type of java applette.
Colsky1's suggestion fixed my problem.
I went into security prefernces and selected the Manage Website button.
Then you have to pick the Java applette that you want to allow access.

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

Screen variant not working when assigned to transaction variant in SHd0

Dear All,
User requires tax code column for line items in MIRO to be made non-editable. I am using SHD0 transaction for the same. I am able to make the column grey-off by creating screen variant. The program is SAPLMR1M and screen number 6310. When tested individually thru SHD0 the variant is working perfect. But it is not working when assigned to a transaction variant. Any clues on the same would be really helpful.
Thanks in advance
Komal

Hi,
Try to record again for the whole set of screens instead of doing that for the individual tax screen and only for the tax screen make the required field disable.
Once done and saved, you can see all the screens variants in the transaction variant.
Use the Change WITH PROCESSING OPTION.
Hope this solves your problem
Regards
Shiva

[svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

Revision: 13257
Revision: 13257
Author:   [email protected]
Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
Log Message:
Fix for @inheritDoc not working on a setter, but works on a getter
QE notes: None.
Doc notes: None
Bugs: SDK-24727
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24727
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

steabert wrote:
Hi,
I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=dell-s14
I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

Test sequences not working in standard prototype adaptor with Execute Steps in process

Test sequences not working in standard prototype adaptor with "Execute Steps in process" but the sequences works in "Execute steps in an External instance of CVI"(Debug mode). Pl help with solution
Apriciate your help
Regards,
Sharanu

Sharanu,
Thanks for contacting National Instruments. It would help us out a lot if you could specify exactly what is not working. Will the sequence just not run? Is it giving you an error message? Or what exactly does not work about it? The initial thing that I could think of that would make it not work in External Instance but not using the RunTime Engine is that you might be missing a support library when trying to run it in this configuration. If you click on the "Configure Auto-Loading of Support Libraries Needed for Linking .objs and .libs" button, you can make sure that all the support libraries you might be using are added in this list (you can add them using the "Add Other Libraries..." button). If this does not fix your problem, then let us know a litt
le more about what is going on and we can help you from there. Thanks.
Adam B.
Applications Engineer
National Instruments

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

HT201363 I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have

I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have?

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

My Wifi is not working after re setting the net work also

My Wifi is not working after re setting the network also.

Read here:
http://support.apple.com/kb/ts1559
If nothing helps, make an appointment at any Apple store.

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement

(i bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement.)
Hello i am nitin from india, i purchased a iphone5c because i heard that iphone comes with a great coustmer service, but this statment becomes totally wrong today, when i faced coustmer executive at service center of iphone then he said that i have to check it out and it may be a physical damage, ( how it is possible even i carried this phone with anti shock cover guard and its never fall down from my hand.) the simple thing i know that i want my phone replaced, otherwise it would be a great mistake of my life to purchase an iphone.
Thanks to all apple team for your wonderful service,

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue... See here...
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57
Apple Warranty > http://www.apple.com/legal/warranty/
iPhone Warranty > The warranty is only valid in the country of original purchase... Except for EU Countries...

Quickpaint reports not working with assignment set defined with criteria

Similar Messages

Maybe you are looking for