Retrieving the Message Header In Asyn Scenario With Sender As Client Proxy
Hi All,
I have a asynchronous scenario (XI to SOAP),where on the sender side Client Proxy is being triggered by an ABAP Report.
My problem is,that as the Proxy is in Sender Side I am not able to get the Message Header (i.e. the Standard Header Structure for Proxy Scenarios which I need to send as an input for creating Alerts).
This message header is automatically populated when I fill it up via message mapping in case of Server Proxy...But for Client Proxy(Async Case)...I am not able to make out......
The Structure Is:
SYSTEM_OF_ORIGIN
SENDER_INTERFACE
SENDER_NAMESPACE
MESSAGE_ID
SENDER_SERVICE
RECEIVER_INTERFACE
RECEIVER_NAMESPACE
RECEIVER_SERVICE
PROCESS_AREA
How can this message header be automatically retrived in the ABAP Code ????
Please help!!!!!!
Regards,
Sriparna
Hi,
plz find all header variables, explanations and examples at [SAP help: Querying the XI Message Header|http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm]
Regards,
Udo
Edited by: Udo Martens on Jul 20, 2010 12:35 PM
Similar Messages
-
Retrieve the message put in message header using variable substitution
hi,
i am using dynamic configuration to put some information in the message header.is it possible to retrieve the message using variable substitution and if it is possible then how it be done using variable substitution.
regards,
MeenakshiVariable Substitution does not allow you to read all the messaeg header elements only some of them can be read/ access....for more info on how to read the message header elements refer: /people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean
From the above blog:
When using Variable Substitution, only certain standard message header attributes can be used/accessed (e.g. sender_party,
sender_service, receiver_party, receiver_service, interface_name, interface_namespace, message_id)
Better use Dynamic Configuration to read the parameters.
I am wondering why you need to read the message header parameters when you are putting them using Dynamic Configuration.....cant you just get the details from the dynamic configuration UDF itself?
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 10, 2009 1:18 PM -
Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} fai
I get the following error when i try and access a site I'm working on through internet explorer, but it works fine when i run it in the visual studio 2005 environment.<br /><br />(I'm trying to complete a pdf with form fields)<br /><br />======<br /><br />Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} failed due to the following error: 80070005. <br />Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. <br /><br />Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} failed due to the following error: 80070005. <br /><br />ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. <br /><br />To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.<br /><br />======<br /><br /> // Initialize Acrobat by creating App object.<br /> CAcroApp acroApp = new AcroAppClass(); //<- Break happens here <br /><br /> // Create an AVDoc object<br /> CAcroAVDoc avDoc = new AcroAVDocClass();<br /><br />Does anyone know of a way to solve this? I'm trying to swap over from iTextSharp to the actual adobe sdk, as I've had some bugs with iText.
A lot to try and cover here.
>I saw that the one pdf was created in Adobe Designer 7.1 and the other in Amgraf OneForm Designer Plus.
Ok, we can only say anything about the first one. But you must find
out what kind of form it is if you want to work with it
programmatically: they are utterly unlike each other.
You cannot use FDF format with an a form made with Designer (also
called an XFA form or XML form). But you can import an XML file in
Acrobat.
>
>Based on the second part of your reply i'm assuming the way i'm currently passing the data to the pdf is the reason i get the following message
>
>"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available"
No, completely different issue. This file has been prepared specially
so it can be saved in Adobe Reader. Any change to the file will break
this. The only exception is Acrobat, which you cannot use.
No third party product can repair this, but Adobe's server product
LiveCycle Reader Extensions can put back the rights. You might use
this in conjunction with LiveCycle Forms.
Aandi Inston -
An unhandled exception occurred and the process was terminated.
Application ID: /LM/W3SVC/1/ROOT/OPA
Process ID: 10296
Exception: System.TypeInitializationException
Message: The type initializer for 'Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton' threw an exception.
StackTrace: at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton.Finalize()
InnerException: System.Runtime.InteropServices.COMException
Message: Retrieving the COM class factory for component with CLSID {01732742-D1A2-11D7-99EB-505054503030} failed due to the following error: 80040154.
StackTrace: at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCore..ctor()
at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..ctor(String reserved)
at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..ctor()
at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..cctor()
can any one help me with this?Try running the SharePoint Product Configuration Wizard and see if that clears up this issue.
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!
Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.) -
I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor". I get this whentrying to update itunes.
Does anyone have a idea how to fix this/
ThanksTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this to resolve the issue. Thanks for any help!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR -
I have an IPOD Classic with purchased music and I want to sync it with a different PC but I get the message your device is synced with another PC. How do I resolve this issue? I don't have the previous PC.
I want to sync it with a different PC
On that PC, launch iTunes. From the menu bar top of your screen click Store / Authorize This Computer. -
I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!
cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway. -
Need help to retrieve the message from MQ using get operation
Hi
Used MQ adapter to Post a message to queue.
And used Received activity in bpel to retrieve the message using MQ adapter from same queue(used get operation) , got an error message as timed
out exception.
Could some one assist in retrieving the message from MQ using get operation.
Regards
RajaHi Raja,
Is the process a empty bpel process which is used to get the message from the MQ?
Regards
Surya -
Code to Retrieve the message from Queue in Oracle BPEL
Actually I am placing the Message into JMS Queue using JMS Adapter.After Placing the message,I need to retrieve the placed message from same queue.
Right now I am using the Receive Activity and the JMS Adapter to retrieve the message from Queue.But my receive activity is always in the waiting state itself and I am not able to retrieve the message from queue.What might be the issue????
Can anybody give me a better suggestion so that I can go ahead??
Thanks in advance for your help.Hi Raja,
Is the process a empty bpel process which is used to get the message from the MQ?
Regards
Surya -
How do i change the library my iPod is synced to?
I want to sync my iPod with my current mac book iTunes, but the message says I am synced with another library.Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
How do I retrieve the tone panel in Lightroom 5 ( with the sliders for exposure, contrast, vibrancy etc which sits under the icons for cropping, red eye etc)?
On a PC, right-click (Mac Cmd-click) on one of the other panel headings such as Tone Curve, Detail, etc. In the context menu that displays, make sure there is a checkmark in Basic. Another quick way to do it is Ctrl->1 or Cmd->1.
-
Hey guys,
I've used xp_cmdpowershell from SQL Server 2008 R2 to execute a powershell scripts.
One of this scripts creates a internetexplorer.application object.
When I execute this script on powershell(version 2.0), it runs.
But when trie to execute for xp_cmdpowershell it fails.
error output:
Retrieving the COM class factory for component with CLSID {0002DF01-0000-0000-C000-000000000046} error: 80070005
script example:
$ie = New-object -com 'internetexplorer.application'
$ie.navigate("http://www.google.com")
$ie.visible = 1
sleep -s 10
$ie.quit()
xp_cmdpowershell example:
EXEC master..xp_cmdshell 'powershell C:\DataLocalTopRonda\scr.ps1';
Anyone have any ideas? Any help will be appreciated.8007005 is typically 'Access Denied'. Did you verify DCOM permissions to this class object? Are you using the same credentials in the PowerShell console as what is being done in SQL?
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book
Maybe you are looking for
-
Hi all, I have a requirement, in which i have to send email notification and SMS to the approver. if the approver decides to approve the PR from the SMS itself , he can do that or if the approver wants to approve the PR from SAP he can do that too (
-
I transfered music from my ipod to a new itunes library (new PC). The music plays in itunes but when I sync my ipod and try to drag songs from the itunes library to the ipod it wont load. It shows a circle with aline through it.
-
Export data from block to excel.
Hi Does anybody know how I can export data from oracle forms to an excel worksheet. I need to provide a direct interface for a user where he fetches the data into the block and by just click a button the data from the block should go to an excel shee
-
anyone know if this can be done? i barely use my mac remote but it wouldbe great if ic ould buy a ir receiver and sync it with the mac remote and use it on my pc!
-
When I deleted QuickTime the first time off my computer I had to install QuickTime 7.0 for my New IPod Nano. Well long story short When I run QuickTime it is saying that ( I have an error:-2093.) Does anybody have a clue what that is? As well as when