Right way to jump between pages?

I am in trouble to find the correct way to jump between pages,I have a page alluser.jsp,
in which all usergroups and users are displayed,corresponding to every user's item,I
place a link to delete this user,as below:
<a href="removeuser.jsp?userName=<%=userName%>">delete</a>
in removeuser.jsp,after I have completed the task of deleting this user from database,I
want the client go back to alluser.jsp,where he can find that user has been removed,
but I have tried three different ways,the first,
response.sendRedirect("alluser.jsp"),but It displays the old page,seemingly not following
the logic of alluser.jsp:to fetch data from NOW_BE database,but just displays from the browser's
cache;
the second,
<jsp:forward page="alluser.jsp"/>,but it will forward the parameter userName onto the
alluser.jsp,which doesn't need any parameters,as result,in browser's location bar,I see
..../alluser.jsjp?userName=...,now I cannot refresh the page,because the browser will
prompt me whether to resend the request info to refresh the page;
the third,I simply use
javascript:location="alluser.jsp",but I got the same result as the first approach
now I have been driven crazy,on earth what is the good way to do these?
Please help me,thanks in advance

Instead of having 2 jsp forms, the processing can be done in the same form - "alluser.jsp".
The code below explains as to how this can be implemented.
The ResultSet gets updated without the deleted user.
<%
String message="";
String userid =request.getParameter("USER_ID");
if(userid == null)
userid="";
else
int delusercon=user.del_user_con(userid);
int deluser=user.del_user(userid);
String username=request.getParameter("username");
message=username + " "+ "has been cancelled!";
list=user.get_pendinguser();
}%>
<form>
<%=message%>
<%while(list.next()){%>
<table><tr><td>
<div align="center"><a href="alluser.jsp?USER_ID=<%=list.getString( userid)%>&username=<%list.getString(username)%>">
<B><FONT FACE="Verdana, Arial, Helvetica, sans-serif" SIZE="2">
Deny</FONT></B></a></div>
</td></tr></table>
<%}%>
</form>
Hope this helps!!

Similar Messages

  • GUI way to jump between Frame Labels?

    I have a Flash movie with 15 frame labels over a long span in
    a timeline. Is there a menu or palette that shows these label names
    that lets me jump to specific ones (like Director)?
    I checked out the Movie Explorer and didn't see the label
    names, only frame numbers and various tweens, a lot of stuff. I
    read in the Help and searched this forum for this answer.
    Thank you for any advice or help.
    Scot

    tallscot wrote:
    > I have a Flash movie with 15 frame labels over a long
    span in a timeline. Is
    > there a menu or palette that shows these label names
    that lets me jump to
    > specific ones (like Director)?
    Movie Explorer does show labels. Maker sure the FRAME button
    is pressed.
    (Show Frames And Layers, right next to the one which looks
    like CD)
    Tho, this won't work across multiple scenes, per single
    timeline only.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • HT4528 Phone is freezing up then jumps between pages someone starts typing.

    Phone is acting haunted. Please advise.

    gabmhart wrote:
    Hi,
    Thanks for the welcome!
    The images I use are normally jpegs that I either copy/paste or drag into pages. the images are normally 1-2 mb in size.
    Large numbers take up resources. Depending on compression method, 1-2mb could be large files. The final size needs to be 300dpi and no more.
    Sometimes smaller. I usually just mask the images and I do use Alpha to take backgrounds out.
    Alpha masked images will especially tax the system. Better to prepare images "deep etched" ie background removed in Photoshop or the like.
    I add text boxes to the pages with limited text. Apple has said that Pages should be able to handle docs that have higher mbs and that I should not be having this issue. But I agree it has to do with the images. I am now breaking up and doing single pages but even then it is freezing up. It is odd but I find that the problems get gradually worse. I can create a page with images and manipulate it just fine and then 2 weeks later open the same page and nothing responds. Very frustrating. I am now told by apple that I need more RAM but the fact that I sent a 7 mb doc to a MACPRO user with much more power and she had the exact same issue makes me question that.
    Thoughts? I am brain dead from this.
    Trim and simplify. 20 years of experience. The computer has only limited resources.
    Peter

  • Is there an easy way to insert a page jump link in Muse?

    I have a client that wants to insert embeded videos onto one of his pages.  TWELVE OF THEM!  That is a lot of scrolling and I am wondering if there is an easy way to insert a page jump sot ath users can click at the video description and jump to the video below?

    Hello,
    You can achieve this by using the Anchor option in Muse. You will find the Anchor option between the Effects and Browser Fill options in the toolbar at the top of the Page.
    Please have a look at the screenshot :
    You can follow the steps below to achieve this functionality :
    1) Click on this Anchor option and then scroll down to the video where you wnat to place the anchor.
    2) Now click just beside the audio and it will place the anchor (the anchor icon) there.
    3) Now it will ask you to rename the Anchor. Give it a desired name.
    4) Now select the text which you want to be the trigger (which when clicked should scroll down to the video). Now in the Hyperlink option in the toolbar at the top, you should be able to see an Anchors catagory and all the anchor names (you created) listed there.
    5) Select the desired target Anchor there and this functionality should work fine for you.
    You can create 12 anchors for your 12 videos and place them beside each one of them.
    Note : The Anchor icon is not displayed in Preview/Published output. It is only for design mode. But the functionality will still work.
    Hope this helps.
    Regards,
    Sachin

  • I use BT Yahoo! but when I try and navigate to email from the home page it keeps jumping between 'connected and waiting for login' and never loads up.

    My internet service provider is BT in the UK. The home page is www.btinternet.com. After I've logged on, the home page displays fine - I can see the summary of my emails in one of the windows on the home page. The problem comes when I click on the mail application. The page then tries to load the email application. However, it never actually loads, it keeps jumping between connected and waiting for login. It never achieves it so I just have to click the 'back' button to get to the home page. I use chrome and ie but neither has this problem.

    I retraced my steps to how i got the Google app:
    App Store icon on Home Screen > Search, at bottom > entered Google
    The first Google App on the screen appears:
    Google logo small g in blue square: Google Search; Open (because it is already installed).  Below that is a picture of the iPod with the usual  Google Search screen.  I have never inserted a link into a discussion group so i hope you can open this. 
    http://https://itunes.apple.com/us/app/google-search/id284815942?mt=8
    Does this bring us any closer? 

  • Is there a way to flip the pages in a .pdf so that all of the text is readable (in other words all documents are right side up)?  I have Adobe Acrobat X and am using Windows 8.1.

    Is there a way to flip the pages in a .pdf so that all of the text is readable (in other words all documents are right side up)?  I have Adobe Acrobat X and am using Windows 8.1.

    I have a pdf with over 2,000 pages, many of which are sideways.  I do not want to manually flip each one (few are next to each other).  Is there a way to automate the function so that all sideways or upside down text pages are righted?

  • Intellicast it does not load the way it did before. Now I just get a page with writing yet on Explpre it losds the right way

    I tried reinstalling Firefox but I get the same thing with Intellicast. I get a page with typed writing instead of a grafic page with the maps and 10 day forecast. I go to Internet Explorer and get the same intellicast.com page and it opens up the right way. what is the problem and can it be fixed. I never had this problem before with intellicast and have been using it for some time on firefox

    If it happens again the first try these basic steps:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • I have a new IMAC. My mouse (very sensible) gave me the possibility to move left to right and right to left and also to scroll on the vertical way also on my page word. I like the vertical way, it is ok, but is it possible to block the vertical move only

    Hi, I have a new IMAC. Only by touch, my mouse (very sensible) gave me the possibility to move left to right and right to left on my pages word and also to scroll on the vertical way. I am ok with the vertical way, but I don't like the very sensible horizontal way. Do someone know a way to block the vertical move only and keep the move of the horizontal way? The only way I found blocked all the moves.
    I hope my descripion is understandable... English is not my habitual language.
    Danielle

    Merci Éric de me revenir en français, je l'apprécie beaucoup. Je ne veux conserver que le mouvement de haut en bas et de bas en haut. Je ne vois pas l'utilité du mouvement horizontale (gauche-droite, droite-gauche) et pire encore, par mégarde je fais trop souvent bouger ainsi mon texte et cela m'embête, même me dérange  beaucoup. Même que cela me donne même mal au coeur hahahahahaha!
    Par contre, ma souris précédente avait le mouvement de défilement du haut en bas et bas en haut et cela par contre m'est très utile. Je voudrais donc savoir s'il existe un moyen de stopper le mouvement de côté mais conserver tout de même la fonction du mouvement haut-bas et bas-haut avec le simple toucher de la souris. Suis-je plus clair? Disons que c'est plus aisé pour moi en français. merci à toi
    Danielle

  • Pass aprameters between pages

    Hi,
    I have HTML DB form calling a complicated report (in Oracle reports).
    Oracle reports takes in about 50 parameters.
    Each parameter is represented in the form by a list manager or a select list.
    I want to design the form in such a way that the items are spread among different tabs/pages on the form and finally call Oracle report for all these parameters passed through different pages.
    Could any one help me figure this out? Thanks,

    &gt; I have multiple select as one of the item in page 1. In which case,
    &gt; these values are stored in the database.
    Well, if they are on an HTML DB page, as a result from a DML or SELECT operation, then you can reference their value in HTML DB.
    &gt; Then, I can't pass these parameters directly between pages,
    &gt; right? Is querying directly from the database the only option?
    I'm a little confused here, as I think you may be overcomplicating how HTML DB works a bit.. An HTML DB item can have a number of different sources - one of which is from a database column. If you are intending on updating previously committed data, then you would need some sort of process to fetch the data into the HTML DB items.
    If you are using this as a "wizard", and want the user to select 100 different options then commit, you don't need to directly commit your transaction until the user clicks on the "save" button. Every item's value is automatically stored in session state by HTML DB; that's what you can reference from any other page.
    Hope this helps,
    - Scott -

  • DW Template and table jump from page to page

    Hi,
    I have put together a rather quick, basic site for a friend
    in need (meaning=bare bones here to get it started faster). It's
    template-based and table-based.
    The site is generally working okay except that the content in
    terms of the tables jumps slightly to the left or to the right
    during navigation between pages. It all hangs together, but it
    shifts slightly, so I know something is out of line.
    The navigation is done with Fireworks CS3, so there may be
    something wrong with how my slices are set up. I've tweaked them a
    bit and made them better, but everything still shifts between
    pages.
    I appreciate any help or assistance anyone could offer.
    Here's the Url:
    Billy Marcus Website
    Many Thanks, Frank B.

    I saw no evidence that this was occurring. Or maybe I looked
    after you
    fixed it? Looks like it.
    Replace what you have with this -
    :root { overflow-y:scroll; }
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "brightbelt" <[email protected]> wrote in
    message
    news:gngtao$a86$[email protected]..
    > Thanks, I found the answer in this forum search.
    >
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1420064&highlight_key=y&keyword1=pages%20jump

  • Search for master page usage; better way to use master pages?

    Hi all,
    I am using Frame 9. I have my files set to always have an even number of pages. For chapters where the text ends on a right-hand page, I assign a custom master page to the final left-hand page -- this custom master page has our logo on it. However, because my files have a lot of conditional text (3 different versions of the publication  get generated from the same source files), the lengths of the chapters often change when switching between different conditional versions. So for example, for version 1, I assign the custom master page to the last page of the chapter, which is page 28. Then when I switch my conditional text settings to show version 2, the chapter is now 36 pages long, but my custom master page is still applied to page 28. I have to remove it from page 28 and reassign it to page 38. Here are my questions:
    1) Is there a way to search for pages that have a specific master page applied? I hoped that I could generate a list of master page usage using the Special > List Of > References option, but apparently not.
    2) Is there any way to get Frame to automatically assign my custom master page when it is appropriate, rather than doing it by hand for each conditional version of each chapter?
    Thanks!

    kelly.usa wrote:
    Hi all,
    I am using Frame 9. I have my files set to always have an even number of pages. For chapters where the text ends on a right-hand page, I assign a custom master page to the final left-hand page -- this custom master page has our logo on it. However, because my files have a lot of conditional text (3 different versions of the publication  get generated from the same source files), the lengths of the chapters often change when switching between different conditional versions. So for example, for version 1, I assign the custom master page to the last page of the chapter, which is page 28. Then when I switch my conditional text settings to show version 2, the chapter is now 36 pages long, but my custom master page is still applied to page 28. I have to remove it from page 28 and reassign it to page 38. Here are my questions:
    1) Is there a way to search for pages that have a specific master page applied? I hoped that I could generate a list of master page usage using the Special > List Of > References option, but apparently not.
    2) Is there any way to get Frame to automatically assign my custom master page when it is appropriate, rather than doing it by hand for each conditional version of each chapter?
    Thanks!
    To identify master pages that control pages in body page view, create an identifier on each master page, as you'd create a watermark with text in a background text frame. Control its visibility with either a condition, or by assigning it a color that's invisible in a color view.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • How to create a custom panel in the right way (without having an empty panel in the file info) ?

    Hi Everyone
    My name is Daté.
    I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
    I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
    Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
    When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
    The main idea is to (Theory) :
    create custom panels used by fashion designers to classify their design files.
    Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
    Find someone to make a script able to export metadata in xml files
    Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
    I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
    But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
    Here is the process :
    I have installed flashbuilder 4.6
    I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
    In Flashbuilder, i have created a new project and select xmp Custom panel
    The new project is created in flashbuilder with a field with A BASIC Description Field
    To generate the panel, right click the project folder and select xmp / Publish Custom Panel
    The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
      Go to illustrator, Open the file Info
    The panel appears empty
    The others panel are also empty
    The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
    When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
    I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
    I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
    It seems that many peaople have this issue, but i dodn't find a solution in the forum.
    I try to create a trust file (cfg), but it didn't work.
    It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
    Thanks a lot for your help,
    Best regards,
    Daté 

    Hi Sunil,
    After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
    There is 2 different ways, the first described below is not working whereas the second is fine :
    METHOD 1 :
    I have downloaded the XMP-Fileinfo-SDK-CS6
    In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
    The plugin install an XMP project
    In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
    A new xmp project is created in flashbuilder.
    You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
    The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
    Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
    I try this way several times, with no good results.
    METHOD 2 :
    I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
    In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
    As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
    The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
    When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
    The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
    The second method seems to be the right way.
    For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
    So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
    I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
    Sunil, as you belong to the staff team, can you tell me if there is  :
    A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
    A plugin to allow indesign to get custom XMP in live caption
    A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
    How can you print the XMP data with the thumbnail of the file ?
    Thanks a lot for your reply.
    Best Regards
    Daté

  • Right way of configuring higher MTU over a Port Channel

    Hi guys,
    I have a running critical Port-Channel between two locations.
    Here's the config
    SW1:
    interface Port-channel2
     switchport
     switchport trunk encapsulation dot1q
     switchport mode trunk
    end
    interface GigabitEthernet1/45
     switchport trunk encapsulation dot1q
     switchport mode trunk
     channel-protocol lacp
     channel-group 2 mode active
    end
    interface GigabitEthernet1/46
     switchport trunk encapsulation dot1q
     switchport mode trunk
     channel-protocol lacp
     channel-group 2 mode active
    end
    SW2
    interface GigabitEthernet1/1
     switchport trunk encapsulation dot1q
     switchport mode trunk
     channel-protocol lacp
     channel-group 2 mode passive
    end
    interface GigabitEthernet1/2
     switchport trunk encapsulation dot1q
     switchport mode trunk
     channel-protocol lacp
     channel-group 2 mode passive
    end
    interface Port-channel2
     switchport
     switchport trunk encapsulation dot1q
     switchport mode trunk
    end
    Now I need to increase the MTU from default value to 9198. What the right way to do it and avoid any connectivity loss, PortChannel restart.
    Does it matter what switch I start first?
    Thanks!
    L.E. both SW are WS-C4948

    Hi,
    Because you are using layer 2 interfaces - there is no fragmentation support at layer 2, and interfaces receiving frames which have an unsupported size will be dropped.
    I think the best way for you to proceed is to lab this up; and verify what happens - it may be that you need to make changes on switches at either end of the channel within a very short time frame to prevent too large an outage.
     When you are ready to maike your change - think the best way to do this is to use the interface range command, and apply the 'mtu' command to all the interfaces in this range. I don't think it matters which switch you apply this change to first, and I don't believe if you are hinting at the 802.3ad (controlled by system-priority) decision maker, that it makes any difference.
    HTH
    Mike

  • Right way of login form...

    Hello
    I am a really newbie in web programming. I want to write a web application with JSF. I wonder what is the rgiht way of creating the login form. I tried to write a page segment file for it but page segments do not have prerender method so it cannot be fully controlled...I want something like that:
    login control will be two parts..
    if login info is not found in session, than it will show the login form.
    if the user is found in session, than it will show the menu for the user...
    but i couldnt do that because prerender methos is not available in page segments..
    what is the right way for doing that kind of thing?

    Indeed implement a Filter.
    Once an user logs in, put the User object in the HttpSession. Let the filter check on this User object. If this User object is null and you're not in the login page, then redirect to the login page.
    Do a Google search on "LoginFilter implements Filter" or "UserFilter implements Filter" and you'll find lot of examples.
    http://www.google.com/search?q=%22LoginFilter implements Filter%22
    http://www.google.com/search?q=%22UserFilter implements Filter%22
    Here is an advanced one which actually doesn't redirect if the User object doesn't exist, but this might give you some new insights: http://balusc.xs4all.nl/srv/dev-jep-usf.html

  • Right Way to change MBOs Connections

    Hellow Experts,
    I'm really enjoying the communication here, and I got a new one.
    Whats the right way of change MBOs Connections to SAP for instance?
    I tried 2 methods.
    Method One
    Title: Its just too much Work
    Proceeding:
    I start rebinding every MBO and  operatios to the new Connection.
    Drawback:
    If i have 1 MBO it may takes 30 seconds if they are 40 or 50 mbos it will take a lot of time.
    there are the output tables from bapis are recreated if dont they are deleted.
    so you have to reimplement all the operations one again. and it as the adicional
    problem that we all can miss something and do something wrong.
    Method Two
    Title: Simpler way
    Proceeding:
    change the connection profile itself at workspace from DEV->QA or QA->PRD
    Drawback:
    supposing that you want independence between the apps connections  like app1 is on DEV and ap 2 is on PRD.
    this will led to N connections per N applications.
    DEV: (Development)
    QA: (Quality)
    PRD: (Production)
    I would like to know if you guys have more approaches and what you think of this ones.
    Cheers,
    Laguerta

    Daniel Laguerta
    I will never follow method one as suggested by you.
    To add for the "Method 2", i will create a separate (new) workspace for different instance like DEV, QA, PROD.
    eg. Once DEV is done, i ll export the whole project, and import the same in a new workspace for QA.
         Create a new SUP QA and SAP connection profile
    Change connection profile to each mbo and its operations.
    And deploy to SUP QA Env
    Still it is time consuming.
    there is another method (should be preferable)
    Deploying mbo package from SCC instead of creating workspace and connection profiles.
    Deploying MBO from Sybase Control Center (SCC)
    Regards,
    JK

Maybe you are looking for

  • Got my Zen Vision M: to work but

    Hey everyone, I got the Zen Vision:M 30gb last Friday and after some trial-and-error I finally got the mp3 player to work. I have some questions and I'm hoping you guys can answer them. When I first plugged in my mp3 player to my PC it wouldn't turn

  • Greyed out boxes

    I went back all the way to page 57 of the forums looking for a satisfactory fix to this issue and haven't found one. I checked my file permissions, they are set correctly so that I have full control over the files and folders. The files/folders are N

  • Fan runs constantly (not my printer)

    Hi, I've had this problem for a while and it's really getting to me. The fan on my black MacBook (purchased April 2007 and treated very well) runs constantly. Not upon startup, but as soon as I open Firefox it's going until I shut down. I've read abo

  • Forms & Reports 11gR2 installation - Can't create domain

    Hi, I try to install Forms & Reports 11gR2 (version 11.1.2.2.0) on a Windows 7 64 bits machine. Here is that I try : Installation of JDK 1.7.0.51 for Windows 7 64 bits Installation of WebLogic 10.3.6 "Generic" bits (java -Xmx1024m -jar wls1036-generi

  • Material Master creation workflow

    Hi everyone.... Last week I went on the BIT601 training course and I'm now tryinig to create my first workflow for material master creation, so please forgive my rather noobish questions. I think this must be a common workflow but I'm sure every comp