Satellite P50T-A-115 after Win8.1 upgrade does not play sound over HDMI

I have a newly acquired Satellite P50T-A-115, upgraded to win 8.1, all drivers and upodates suggested are installed.
I get no sound on my home movie system, playing from my laptop, while the video is good.
The sound comes from the laptop internal speakers.
There is no other options than my internal loud speakers in the control panel.
I have seen similar questions for other laptops, but have not found suggestions useful.
Does anyone get this to work on a P50T-A-115 ?

Please check this thread
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74149
There was a similar discussion and issue could be solved by installing and updating the drivers in the right order and uninstalling the Intel WiDi as suggested by Toshiba.
Feedback would be appreciated.

Similar Messages

  • Error after update : "Method 'Upgrade' does not have an implementation"

    Hello,
    After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
    Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
    from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c' does not have an implementation.
    And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
    and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
    Any idea ?
    Thanks in advance for your answer.
    Mike

    Hi Mike,
    If you are using SharePoint 2013 Server edition, please re-download the
    SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
    issue you can take a look.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
    http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
    http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
    Thanks
    Daniel Yang
    TechNet Community Support

  • My Macbook Pro does not play sound after i unpluged headphones and no light is on

    Hi i have a macbook pro and i like it one day when we were trying to get it to work with our pa system and it went into protect mode so i un-pluged my laptop and no sound was to be heard there are no input and output driver in the sound nothing i tryed everything resterted it reset the pram and no red light is there any help besides going to the genius bar?

    See if there are some methods here you havent tried.  These are the only phone numbers and email addresses that I am aware of that are made public by Apple: http://www.apple.com/contact/
    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • Elements 10 upgrade will not play sound

    Hi all
    I loaded a mov file to edit in elements10. The picture is fine but i have no sound at all. I do see the audio wave in the audio area, so im a little confused why it will not play or rather i cannot hear sound. Ive cheacked my audio settings and they seem to be on and working. The file is a hd 24fps mov file from my T3i hddslr camera. On the camera and in windows the sound is working.
    Its been about a year since i used cs4-5 premier for a videographer class. So i am familiar with the software sort of. I know people that have used elements for their indy films and not have issues like this. Any help would be great.

    As a test, I would Import a known good WAV file, say one of the system's Sounds, and drag it to the Timeline. Do you hear the Audio from that WAV file?
    For general Audio issues, and settings, this ARTICLE might be helpful.
    When you Import any file with Audio, PrE will need a few moments to Conform the Audio. If this process is not allowed to complete, one can loose the Audio. This ARTICLE goes into more detail on Conforming Audio.
    Good luck, and please let us know how the test goes,
    Hunt

  • ITunes player does not play songs since upgrading to 10.5.1; not fixed with 10.5.2 upgrade. What now?

    After upgrading iTunes on my laptop to version 10.5.1, my player will NOT play any songs. My Library seems intact and no songs appear to be missing, but no song will play --not a song downloaded from iTunes Store, nor a song downloaded from a CD. I was hoping version 10.5.2 would fix this, but apparently not. Still not working. Songs do play on my iPod and on my iPhone and I can transfer songs from my laptop to my devices; I can also download Apps to my laptop through the iTunes Store, etc.--all other functions of iTunes seem to be okay, only the player is not working. (My laptop is an hp Probook with Intel i5 chip, Windows 7 Pro OS.)

    Does it look like the song is playing at the top of iTunes? Can you see the timer moving?
    Also, make sure the volume slider isn't all the way to the left (mute).
    This Apple document may help too -> iTunes and QuickTime for Windows: Audio does not play or plays incorrectly

  • The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

    The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

    There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks.  You might want to do a search on that topic and see if anyone has a solution.  There have been various versions of the problem but a lot related to errors in the download package or failure to download.

  • I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate? I am in Delhi, India.

    Hi,
    I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
    Satish

    would be best if you can download the guide here
    http://support.apple.com/manuals/#iphone

  • After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly. This happened after update.  Final Cut Pro X 10.1.1

    After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly.
    This happened after update.
    Final Cut Pro X 10.1.1 & Mac Pro 10.9.2

    Just refuse to open.
    Player show me first page (background) & refuse to open.
    Thanks. Greg.

  • HT4943 I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen.  Has anyone had this problem?

    I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen.  Has anyone had this problem?
    When I click on the magazine, my screen is just blank.  I can see the purchase, and in my settings/store, the magazine shows "ON".

    I would do a power cycle/reset of your device first, if you haven't, to rule that out.
    http://support.apple.com/kb/HT1430
    If that doesn't help, talking to iTunes customer support would be in order...or whoever you purchased the magazine subscription through. 
    http://www.apple.com/support/itunes/
    If the magazine is browser based, you might also try another browser.  I like "Atomic Browser".  It is available on the app store. 

  • After Effects error : layer does not have a source.

    Hi All,
              I add a Text layer and then add my custom fill  effect to it. Then I call AdvItemSuite1()->PF_ForceRerender(in_data, &(params[0]->u.ld)) from AEGP for all the layers. But only for Text layer, AE pops up a dialog displaying the following error :
    After Effects error : layer does not have a source.
    (26::335)
    Why is this happening? What other call can I use to rerender all the layers?
    Thanks & Regards,
    Dheeraj

    Am 13.04.2011 12:21, schrieb dheeraj_c:
    For now just added a dummy parameter in the effect and calling AEGP_SetStreamValue() to render all the layer with effect.
    I also have experienced problems with PF_ForceRerender(),
    AEGP_SetStreamValu() seems like an alternative solution...

  • HT4623 I have updated my iPhone 5 but after this update it does not accept charging

    Dear Sir/Ma'am,
    I have update my iphone 5 software with iOS 7 but after this update it does not accept the charger or neither any charging ?
    I need to know how to solve this issue please.
    Thank you

    Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
    You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes.

  • Photoshop CS6 Upgrade Does Not Recognize CS3 Extended as Qualifying Product

    I am unable to install my Photoshop CS6 upgrade because the upgrade does not recognize a qualifying product on my system.  When asked, I enter my current Photoshop CS3 Extended serial number, but the upgrade does not recognize it as a valid serial number from a qualifying product.  I have tried to do a clean install to make sure no other applications were running or in conflict.  My operating system is Windows XP Media Center Edition 2005, Service Pack 3.  I have an Intel Core 2, Quad CPU @2.66 GHz with 4GB RAM.    

    SouthCityTim I would recommend contacting our support team so they can validate your upgrade path and serial number.  For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.

  • I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

    I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

    Please also see Boot Camp: Set the default operating system.

  • I recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

    i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

    You can't gift it, gifting can only be done from within the store, not from within your library.
    Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Ipod does not play music in play after...

    Hello Guys...
    I have this problem... In the night I connect my ipod to the computer to charge while I am working, in the morning I browse in the ipod menu but when I play any music file, the screen shows the "play symbolo" but the song does not play, I press "pause" then "play" but not works, after it, I reset the ipod pressing the "menu and center" buttons, after it, works good.
    In the day when I dont play music for couple hours and try again, the problem comes again.
    The question, any solution?
    I have 5th ipod generation, 30G, ipod software 1.2.1, iTunes (last version) 7.1.1.5, windows xp.
    Thanks in advanced for the help.
    JMP
    5th Gen 30Gb. Windows XP
    None   Windows XP  

    Hello,
    I have the same problem ...
    Could you help us please ?
    Thanks.
    PBD

Maybe you are looking for

  • Sales document creation error.

    Hi Guru's, I am using a function module to create a sales order. But i'm getting an error which says: For object RV_BELEG , number range interval  does not exist. How to rectify this? Below is the code : CALL FUNCTION 'SD_SALES_DOCUMENT_SAVE'        

  • Problem with language(UTF-8)

    hi I am not getting proper output while. while reading data from access(mdb) file. every time i got ????? as out put. i have an Tamil stuff in my access file. thanks gag

  • Files that "remember playback position" are not updating during sync

    I listen to long spoken word MP3 files that are not podcasts. I have the "remember playback position" option checked on these files. I will add it to my library, sync it to my 2nd gen iPod shuffle, then go play it. The shuffle will remember the playb

  • Line Graph help

    Post Author: Erobson CA Forum: Charts and Graphs I have data organized into rows as follows:Site    | Period 1 | Period 2 | Period 3 | Period 4|For instance,Site 1 |  45% | 35% | 56% | 60% |Site 2 |  50% | 45% | 36% | 40% |I want to create a line gra

  • HT4972 images in safari not displaying when I'm on 3g after 5.1.1 update

    Hi - I updated by iPhone 4S last night to 5.1.1 and since them I noticed that when I'm not on WiFi (and on Telus 3G) on some sites I'm browsing on Safari images do not show up (just a little ? mark) As soon as go on WiFi they work - and I had my frie