Select current line through push button in module pool

Hi,
I have created one module pool program with table control. There I have inserted on push button where some logic is deployed.
Logic :-
If I push button on current line or any line, that line should be selected in the program. So that I can move that line to next internal table.
But, it always shows first line.
Please suggest the same.

hi amol,
GET CURSOR only works on the number of table control lines that can be displayed on screen at any one time. So, if your screen can display only 4 lines, all you'll ever get from GET CURSOR is a number 1 to 4.
But your screen also knows which of your table control records is currently displayed as the top line of your table control. This information is held in field TC_ITEMS-TOP_LINE (where TC_ITEMS is the name of your table control). By combining these two bits of information, you can find the correct line number of your selected record.
For example in the case you describe where you are clicking on line 5 but GET CURSOR thinks it is line 4 because your screen has moved down a record, I would think that TC_ITEMS-TOP_LINE would be 2. Add 4 and 2 together, subtract 1 and you'll get your correct line number.
hope it helps,
vikas

Similar Messages

Sort up and sort Down push buttons in module pool with table control wizard

hi,
i have created 2 buttons for Sort up and sort Down push buttons in module pool with table control wizard
please any one can help me.
regards

Hi
Following code is to enable and disable the tbl control using two buttons. Just alter the code and for each button write the sort code.
REPORT YJAN27_SCREEN                                               .
TABLES: SFLIGHT, YFLIGHT_28.
TYPES: BEGIN OF struct1,
      carrid like sflight-carrid,
      connid like sflight-connid,
      fldate like sflight-fldate,
       END OF struct1.
CONTROLS TBL1 TYPE TABLEVIEW USING SCREEN 2700.
DATA: OK_CODE LIKE SY-UCOMM,
      CARRID LIKE SFLIGHT-CARRID,                                    "cols in tbl ctrl
      CONNID LIKE SFLIGHT-CONNID,
      FLDATE LIKE SFLIGHT-FLDATE,
      itab TYPE TABLE OF STRUCT1 WITH HEADER LINE,
      cols like line of TBL1-COLS,
      FLAG TYPE I.
FLAG = 1.
CALL SCREEN 2700.
*&      Module STATUS_2700 OUTPUT
*       text
MODULE STATUS_2700 OUTPUT.
SET PF-STATUS 'BACK'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_2700 OUTPUT
*&      Module USER_COMMAND_2700 INPUT
*       text
MODULE USER_COMMAND_2700 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'BACK'.
    LEAVE PROGRAM.
WHEN 'DIS'.                                                         "write code for sort up
    loop AT TBL1-COLS INTO COLS.
       COLS-SCREEN-INPUT = 0.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 2.
WHEN 'ENA'.                                                       "write code for sort down
    loop AT TBL1-COLS INTO COLS.
        COLS-SCREEN-INPUT = 1.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 1.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_2700 INPUT
*&      Module GET_DATA OUTPUT
*       text
MODULE GET_DATA OUTPUT.
select carrid connid fldate from SFLIGHT into table itab.
ENDMODULE.                 " GET_DATA OUTPUT
*&      Module POPULATE_TBL OUTPUT
*       text
MODULE POPULATE_TBL OUTPUT.
    MOVE-CORRESPONDING ITAB TO SFLIGHT.
ENDMODULE.                 " POPULATE_TBL OUTPUT
*&      Module CHANGE_SCREEN OUTPUT
*       text
MODULE CHANGE_SCREEN OUTPUT.    " use this module if you want to hide the other button
CASE FLAG.
WHEN 1.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 1.
         MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
WHEN 2.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
ENDCASE.
ENDMODULE.                 " CHANGE_SCREEN OUTPUT
PROCESS BEFORE OUTPUT.
MODULE STATUS_2700.
MODULE CHANGE_SCREEN.     " use this if you want to display one button at a time
MODULE GET_DATA.
loop at itab WITH control TBL1.
    MODULE POPULATE_TBL.       " populate tbl ctrl
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2700.    " do the sort operations
loop at itab.
endloop.
Hope this helps
Regards,
Jayanthi.K

I want to stop loop through push button forms 10g

I want to stop looping through push button forms 10g it is like (SwingWorker() in java) (DoEvent() in .net)
The problem in forms 10g that when you start looping the form will freeze and you can't push any button on form, I found solution for that in form 6i through package d2kwutil **WIN_API_UTILITY.InterruptCheck(hButton)**
But in 10g I can't find solution, Please help>>>>>
declare
     hButton          PLS_INTEGER;
begin
:interruptcheck.counter := 0;
hButton := get_item_property('INTERRUPTCHECK.PB_OFF',WINDOW_HANDLE);
go_item('interruptcheck.loopcount');
set_item_property('INTERRUPTCHECK.PB_OFF',ENABLED,PROPERTY_TRUE);
set_item_property('INTERRUPTCHECK.PB',ENABLED,PROPERTY_FALSE);
set_application_property(CURSOR_STYLE,'HELP');
set_application_property(CURSOR_STYLE,'<d2kwut60>WAIT');
for i in 1..:interruptcheck.loopcount LOOP
     if WIN_API_UTILITY.InterruptCheck(hButton) then
          exit;
     end if;
     :interruptcheck.counter := i;
     synchronize;
end loop;
set_item_property('INTERRUPTCHECK.PB_OFF',ENABLED,PROPERTY_FALSE);
set_item_property('INTERRUPTCHECK.PB',ENABLED,PROPERTY_TRUE);
set_application_property(CURSOR_STYLE,'DEFAULT');
end;
Edited by: wael amar on May 1, 2010 11:03 PM

Ok, here's a working testcase.
The idea is taken from an article from an oracle magazine (i don't have it at hand, , so i tried to rebuild it by "memory". As far as i remember the original was from the german doag-magazine and was written by Gerd Volberg).
Procedure to do the looping:
PROCEDURE PR_DO_THE_LOOP IS
nNumberInOneStep NUMBER:=2;
tm               TIMER;
BEGIN
     DEFAULT_VALUE(0, 'GLOBAL.INDEX');
IF :GLOBAL.INDEX=0 THEN
     -- Didn't run yet, determine the max count
     :GLOBAL.MAX:=10000;
END IF;
LOOP
     -- Do the looping stuff
     -- Decrease counter
     nNumberInOneStep:=nNumberInOneStep-1;
     -- Increase globale counter
     :GLOBAL.INDEX:=:GLOBAL.INDEX+1;
     -- Exit conditions
     EXIT WHEN nNumberInOneStep=0;
     EXIT WHEN TO_NUMBER(:GLOBAL.INDEX)>=TO_NUMBER(:GLOBAL.MAX);
END LOOP;
-- reset index at end
IF TO_NUMBER(:GLOBAL.INDEX)>=TO_NUMBER(:GLOBAL.MAX) THEN
     :GLOBAL.INDEX:=0;
ELSE
     -- start timer for next iteration
     tm:=CREATE_TIMER('TM', 10, NO_REPEAT);
END IF;
END;The WHEN-TIMER-EXPIRED-trigger
IF :GLOBAL.INTERRUPTED='Y' THEN
     MESSAGE('Interrupted at index ' || :GLOBAL.INDEX);
ELSE
     PR_DO_THE_LOOP;
END IF;The WHEN-BUTTOn-PRESSED-trigger on the interrupt-button
:GLOBAL.INTERRUPTED:='Y';The WHEN-BUTTOn-PRESSED-trigger on the "start"-button
:GLOBAL.INTERRUPTED:='N';
PR_DO_THE_LOOP;

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

Func- Code for Radio-button in Module-pool Prg.

Hi Friend's.
I have define 2 Radio button
on Module-pool screen.
I am not been able to triger the Radio button in
Pai .
How can i assign the function code for
radio-button in module-pool.
pls can any one help me

Hi,
For radion buttons, what ever the name you will give that name only will hold that value ( Either selected or not ). But this variable should be declared as global variable in main program.
Still if you want to assign function code, you can assign one like other fields on the screen.

How to define RADIO BUTTONS in MODULE POOL PROG.?

Hi Experts,
I need to keep the RADIO BUTTONS in 1000_screen of my_module_pool prog., like,
I hv 2 fields in this screen, as expected, the first shuld hv DEFAULT selection.
So, I just simply, dragged & dropped 2 radio buttons from left menu of the screen builder & given them the names as
R_SUMMARY
R_DETAIL
Then i executed the transaction, but, these above 2 fields are getting selected, as default??
I know that, if its a REPORT prog. we can define as w/ a GROUP, then the 1st one is hv the default selection.
so,
1 - How to define RADIO BUTTONS in this screen of a module pool prog.
2 - How to use these names in the prog.(PAI - i guess)?
thanq
Edited by: Srinivas on Jul 12, 2008 11:59 PM

Hi Srinivas,
Please check this link
Re: urgent:Regd radio buttons in module pool
http://saplab.blogspot.com/2007/10/sample-abap-program-for-module-pool_18.html
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Best regards,
raam

How to create radio button in module pool

Hi All,
Please tell me step by step procedure for creating radio button in module pool.give code for two radiobutton and at a time only one should be selected.
Thanks
Narendra

Hi naren,
In the layout of screen painter click on radiobutton option in the left icons and create in the layout and give name as Radio1 and again select the radiobutton icon and create another and give the name as radio2 and by dragging the cursor select the 2 radiobuttons and goto menubar->edit->grouping->radiobuttons grouping->define.
Double clcik on the 2 radiobuttons and give FCT code for the coding purpose of the 2 radiobuttons.
Cheers!!
VEnk@

How To Sort the Table Through Push Buttons (ASC & Desc)???

Hi,
I am facing a problem with regard to 'Push Buttons' that I have created on
my Form. I want the 'Push Button' to sort the table with respect to a
specific column in 'Ascending order' on first push and then in 'Descending
order' on second push and then again in 'Ascending order' on third push and so
on...
please help me to achieve this
regards,
.

Hello,
You could try something like this:
Declare
     LC$Order Varchar2(128) := Get_Block_Property( 'EMP', ORDER_BY ) ;
Begin
     If Instr( LC$Order, 'DESC' ) > 1 Then
           Set_Block_Property( 'EMP', ORDER_BY, 'EMPNO ASC' ) ;
     Else
           Set_Block_Property( 'EMP', ORDER_BY, 'EMPNO DESC' ) ;
     End if ;
     Execute_Query ;
End ;     Francois

Creating Radio Button on Module pool Screen

Hi Gurus,
I am currently working on a program which involves module pool selection screen. In my selection screen i have placed 2 radio buttons, i have kept these radio buttons in same group. But when i am running the program both the radio buttons appear as checked. Could any one help me on that.......I need only one radio button to be checked at a time ..
Thanks in advance....
Regards,
Shiv.

hI,
IT IS HIGHLY IMPOSSIBLE THAT BOTH OF THE RADIOBUTTONS ARE CHECKED.
and there is no chance that both the radiobuttons are in two different groups since in a single group minimum 2 radiobuttons should be there.
check you coding.or if required redraw the radiobuttons. and select the radiobuttons properly while grouping them together..after grouping you will see dotted lines aroung them.
just try that. reward if helpful.
regards,
pankaj singh

How to generate a mail on click of save button on Module pool program.

Hi geeks,
I am developing a Module pool having table control..The table control is supposedly having 10 columns. The user enters values in first 5 colmns and when he saves , a mail should be generated to his hierarchy indicatiing it .How could this be achieved?? . The mail should just have details like the i/p entered in screen . If possible explain through a code snippet..
Thanks in advance
Regards,
Navin

when you press save button, get the sy-ucomm and write the below code. Capture the entries from
table control and send the mail.
DATA : it_objpack   TYPE STANDARD TABLE OF sopcklsti1 ,
         it_objtxt    TYPE STANDARD TABLE OF solisti1 ,
         it_objbin    TYPE STANDARD TABLE OF solisti1 ,
         it_reclist   TYPE STANDARD TABLE OF somlreci1 ,
         wa_doc_chng TYPE sodocchgi1,
         wa_objhead   TYPE soli_tab,
         l_attachment TYPE i,
         l_testo      TYPE i.
DATA:   wa_objpack TYPE sopcklsti1,
          wa_objtxt TYPE solisti1 ,
          wa_objbin TYPE solisti1 ,
          wa_reclist TYPE somlreci1 .
CLEAR: wa_reclist,
          wa_objhead,
          wa_objtxt, it_objtxt[],
          wa_objbin, it_objbin[],
          wa_objpack, it_objpack[].
CLEAR wa_objbin.
REFRESH it_objbin.
it_objbin[] = gt_mess_att[].
DESCRIBE TABLE it_objbin LINES l_attachment.
LOOP AT it_message INTO wa_message.
    wa_objtxt = wa_message. APPEND wa_objtxt TO it_objtxt.
ENDLOOP.
DESCRIBE TABLE it_objtxt LINES l_testo.
wa_doc_chng-obj_name = 'Test'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'Send '
                INTO wa_doc_chng-obj_descr .
wa_doc_chng-sensitivty = 'P'.
wa_doc_chng-obj_prio = '1'.
wa_doc_chng-doc_size = l_testo * 255.
CLEAR wa_objpack-transf_bin.
wa_objpack-head_start = 1.
wa_objpack-head_num   = 0.
wa_objpack-body_start = 1.
wa_objpack-body_num   = l_testo.
wa_objpack-doc_type   = 'RAW'.
APPEND wa_objpack TO it_objpack.
CLEAR wa_reclist.
wa_reclist-copy = 'X'.
IF wa_email IS NOT INITIAL.
    wa_reclist-receiver = wa_email-value1.
    wa_reclist-express = 'X'.
    wa_reclist-rec_type = 'U'.
    wa_reclist-notif_del = 'X'.
    wa_reclist-notif_ndel = 'X'.
    APPEND wa_reclist TO it_reclist.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = wa_doc_chng
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = it_objpack
        object_header              = wa_objhead
        contents_bin               = it_objbin
        contents_txt               = it_objtxt
        receivers                  = it_reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    IF sy-subrc <> 0.
      WRITE 'mail fail'.
    ENDIF.
ENDIF.

Radio button in module pool

In ordinary report programs, if we want to change screen value according to the selection of radion button, we use user command and at user command options.
But how do i do it in module pool programming.
Like in module pool if i select one radio button some input fields should be non edidtable.

Hi,
DATA: OK_CODE TYPE SY-UCOMM,
      PROCESS_CODE TYPE SY-UCOMM.
<b>In PAI</b>
MODULE USER_COMMAND_0100.
   PROCESS_CODE = OK_CODE.
CLEAR OK_CODE.
CASE PROCESS_CODE.
WHEN 'RADIO'. " RADIO is the function code for the radibuttons.
      IF R1 = 'X'.
        R2 = SPACE.
      ELSEIF R2 = 'X'.
        R1 = SPACE.
      ENDIF.
ENDCASE.
Hope this helps.
Reward if helpful.
Regards,
Sipra

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

Radio button in module pool programming

Hello,
Am placing 4 radio button when designing in module pool but at
run time all radio button are getting marked i want only first radio button to be marked and remaining to be with visible but not highlighted plz let me know wht to do in PBO event.

Hi,
Goto to screenpainter of that screen .
Drag and select all the Radio Buttons .
Goto Edit>Grouping>Radiobutongroup-->Define.
Now see the Output.
Regards,
Morris Bond.
Reward Points if Helpful.

How to handle The Back button on Module Pool screen

Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.

hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem.

How to enable the 'FIND' Button in Module Pool Screen. Logic please

Hi All,
   I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
   I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
   Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
   Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
Kiran

Hi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max

Select current line through push button in module pool

Similar Messages

Maybe you are looking for