Selection Criteria in Infopackge for enhanced field of DATASOURCE in R/3

Hi All,
My client requirement is Data has to be loaded on company wise .. means the respective responsible person only carryon loading person as per his profile(Authorisation)load has to be happen...this is one requirement,
one more is (whether in this scenario can we go for Delta)
we enhanced the Datasource with new field in R/3 and when we are trying to make it selction condition in infopackage we are not getting filtering as per that ..
could u or anyone who knows through a light on this..
Thanks in advance
BRB

Hi BRB,
regarding your question about selection field I gave you an answer in one of yours previous post !
Just some considerations about your authorizations requirements.
If I right understood, you want to build a scenario in which there are different persons that, manually, have to access on the system to perform a data loading restricted to a particular company code (so, person A could load only data from company A, person B from company B and so on...)
I think you can obtain this (also with a dedicated infopackages per person), but if you want to manage a delta (your second question) just remember that you can perform different init (with different selections), but the delta channel will be only one and only one will be your delta request management..so, your previous profiling will no longer make sense...
Hope it helps.
Bye,
Roberto

Similar Messages

Delta records are not populating for enhanced fields in 2LIS_17_I3HDR

Hello,
       I have an issue with 2LIS_17_I3HDR datasource, i have enhanced the DS with Zfields, these are populated from AUFK through user exit. When i fill setup table, i can see the values being populated for enhanced fields, but for delta records, i dont find any values for these enhanced fields, even though the values exists in the AUFK table and i even tried degugging the user exit code, it doesnt go through it during the posting of delta records.
Can some one give some suggestion on this issue.
Thanks,
          Pavan

Hello Ravi,
                 Yes, delta records cannot be populated by enhanced fields. Here the issue is different,
i have added a closed date to the extract structure, this is order specific, so when i create a new PM order after the full load, and release the order and close it, the AUFK table get an entry for closed date, my exit compare the object number of the extractor to object number in AUFK and get the closed date value to the DS, this is not same as enabling delta on the enhanced fields (which cant be done).
Thanks,
            Pavan

Delta problem for enhanced field in master datasource

Dear Experts,
I have a master datasource 0customer_attr. I have enhanced it with field sales group. Daily delta comes for this datasource.
But when user changed sales group for a customer from s1 to s2 then it is not coming in delta.
Still there is old sales group exist in BI for particular customer. In short , delta is not coming for enhanced field.
Please advise what should i do ?
Regards
Shweta

The problem is that no delta is posted to the message type for KNA1 in the bdpcv/s tables because the orignatting field is a KNVV field
So if KNVV was changed ie sales group it will not post a ale change pointer for KNA1 therefore the delta for KNA1 will not pick up any change
However if there was a change to KNA1 on the same day as the KNVV changwe then the delta will pick up the change
The way to get around this is to either use a KNVV delta datasource into BW and then enhance 0Customer that way via transformations into the customer infoobject in BW only
Or to put a user exit into the KNVV change on R3 to generate an ale change pointer for KNA1(ie every change in KNVV will generate a change in the KNA1 extractor)

Creating new selection criteria when searching for PR

Hi,
Need help. i want to add selection criteria when searching for a Purchase Requisition (PR).
Currently, when u go to ME52N/ME53N, and you click on 'Other Purchase Request' then you click on F4 the following option are only available when searching for some criteria of PR.
Purchase Requisition per Asset
Purchase Requisition per Requirement Tracking Number
Purchase Requisition per Services
Purchase Requisition per Purchasing Group
Purchase Requisition per Order
Purchase Requisition per Cost Center
Purchase Requisition per Material
Purchase Requisition per Network
Purchase Requisition per Project
Purchase Requisition per Sales Document
my intention to add option perhaps like :
Purchase Requisition per Requestor (the one who created the PR)
Purchase Requition per Short Text
How can i achieve this? Thanks in advance.
She

Hi ,
Goto OS52. Press F4.
Enter thedevelopment class as ME.
Select MBAN, then Enter .
Click on Included Search Helps.
You need add your search.
Explain your requirement to ABAP team . They will help u in updating the search help.
Regards
Ramesh Ch

Delta Enabling for Enhanced field

I have enhancement on standard datasource (Datasource is from Customer Service Appl and enhanced field is from PMCO table and its linked through OBJNR and OBJNR is Primary key in PMCO table and standard field in datasource). My question when users make any change to this field in PMCO table, this particular record is not being picked by delta. How should i make this field delta capable. Since OBJNR is generated is everytime a new order is created, and when they change at PMCO Table since there is no change in OBJNR no delta is picked up.
I have another option is to ask user to do pseudo change on order when they make changes on PMCO table. Is there any other option for this so system can dynamically consider this change.
Your answers are highly appreciated and rewarded.
Regards
Kunal

Hi Kunal,
   I dont think you will get delta for your enhaced field until main record is chaged.
   We can not ask to chage the record for Delta.
   Try this:
   Create one more ODS and load data(in Overwrite) using generic extraction from table PMCO(If you have change data and creation data, you can selectively pull).
   While loading data from your main extractor, assign values for PMCO field in BW update rules from this ODS.
Hope it Helps
Srini

Regarding to enable transfered option for enhanced field in BI 7.0

Hi Experts,
I am working on a requirement for which i have enhanced fields at RSA 6 extractor level and then I removed hide options from those enhanced fields and then I had replicate it at BI system but then what happen na for those fields that i have enhance transfered option at DataSource level in BI side is not enable.Even at Bi level edit button at DataSource level is disabled.So I cannot even edit it.Iam using Emulated DataSource ( 3.5 DataSource ) in BI 7.0.The DataSource is available in activate version.Can any body suggest any thing how to enable transfered option in BI 7.0 when it is disabled.
Thanks & Regards
Vinod kumar

Hi
Check if you have Authorization to Replicate/Change / Active for the DS, BASIS Team can help you with this.
R/3 side
Recheck for your enhanced / Appended fields at R/3 Side .
Make sure that you have saved/Activated the Code/DS/Structure.
RSA6 -- Check your DS for the enhanced Fields again / Transport the Same again.
BI Side
RSA13--Source System --Say Replicate DS -- Now see if you can access the enhanced fields here.
As you said you are using emulated DS -- Check if your Transfer/Update Rules are Active for the DS.. Try to activate the same with RS_TRANSTRU_ACTIVATE_ALL / RSDS_DATASOURCE_ACTIVATE_ALL/ RSDS_UPDR_REACTIVATE_ALL...
Hope it helps and clear

Can't select CMYK text colour for text fields in Acrobat Pro forms?

I have designed a business card template in Indesign, and now want to use Acrobat Pro to add in text fields so that a client can edit the contact details on the cards in future.
I need to select a specific text colour for the fields, so that it matches the rest of the design. The cards will obviously need to be printed and the document has been set up in CMYK, but when I enter the CMYK colour breakdown in the Properties > Text Colour panel, it won't apply the colour to that field. The text either stays at the default black, or reverts to RGB - which isn't suitable for printing and doesn't match the colour I need.
Can anybody PLEASE shed some light on this? Other similar posts have either not been answered or people have suggested JavaScript..? I have no idea what I'm supposed to do with a JS code..? Surely there's an easier explanation?
Thanks in advance.

This is for a text field that you create in Acrobat, whether the form is used offline or online. The script is a custom Format script, which you can place by bringing up the Properties dialog for the field, select the Format tab, set a format category of Custom, and you should see where you can enter the script. Change the string "Instructional text goes here" to the text you want to display when the field is blank.

Data not populated for Enhanced field

Hello,
I had done enhancement by adding field to the LO Datasource.
Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
What is the reason that i am not able to see the data for the enhanced field in RSA7?
Thanks in Advance!
Regards
M.A

Hi M.A,
This means that there is no delta data for that field.
If there is no change in the data for that field then you cannot see any data in RSA7.
Check in the Delta repetition in the RSA7 for any data for that field.
Regards,
ravi Kanth

Selectable doesn't works for input field

I wonder that the selectable property doesn't works even for
input field in flash 8'
I can't see, select, type anything.
Is there any reason for it and how can I tackle this issue.
But it's not a problem in IE7 and works fine in IE7 even it
doesn't do in flash IDE
Plz anyone get this solved.

Are you saying you have an input field and cannot select text
you type?
BTW, setting an input field's selectable property to false
locks the field.

Selecting Not Rated value for Pass field during course follow up

Dear Experts,
We have some courses that are not assessed and as such there is no rating that can be attached to the participant. During course follow-up via LSO_PSV2, the Pass field does have the drop-down value 'Not Rated' but if we select it, the error message Unevaluated participation cannot be followed up appears.
Is there a way to make the Pass field optional? I've looked in the config at the Control of Process Steps but the only option is either Signature and Activate.
Any assistance is greatly appreciated.
Thank you
George

Facing the same issue on clicking on the check box for followup.
Did you manage to resolve this?
Unevaluated participation cannot be followed up

Delta not populated for Enhance field

Hello Friends,
We have a requirement to enhance Sales Header (2LIS_11_VAHDR) to retrieve Customer Group (KDGRP). Hence i enhanced the structure Sales Document: Header Data (MCVBAK) and included the field ZZKDGRP. Also wrote the Customer exit to fetch this data from VBKD-KDGRP.
Now the problem that we are facing is that when any of the standard fields of 2LIS_11_VAHDR are changed we get proper Delta records, but if the user only changes the Customer Group (KDGRP) of a Sales Order we wont get a Delta record.
I referred the Blog https://weblogs.sdn.sap.com/pub/wlg/1591but [original link is broken] would like to know if there are any other solution to handle such a scenario.
Any help will be appreciated.
Note: This field is also available through VA02 so can we make some screen level changes to trigger a Delta when this field value is changed.
Regards,
Nitin S.

its checking for the LO fields to be change to show you delta but not puling delta when one of your feidls change.
create a temp table like C-t_Data in r/3 load all Lo data in it and check ofr this fiedl data to be chnaged ..you will have to write logic in cmod that if previous value is different from new value then update tempt_table and append temp_table data in to C-T-data. hope that helps ..

Select area of image for enhancement?

In PhotoDeluxe, it was easy to select an area of any shape (rectangle, polygon, trace etc.) on the image and apply enhancement (e.g. brightness) to just that area. I can't figure out how to do this in Elements 9 - can anyone show me how? I do it all the time to deal with sharp-edged sun shadows in particular.

John,
Make the selection with one of the selection tools, e.g.lasso, selection brush tool, magic wand, etc. You should see "marching ants" around the selection, indicating that it is active.
Go to Layer>new>layer via copy, placing the selection on its own layer. This maneuver is handy in order to adjust the blending mode and opacity of the layer if indicated. With the selection still active, you can refine it via Select>refine edge
Shut off the visibility of the original layer and apply the change in brightness to the selection.
I prefer to open an adjustment layer (e.g. brightness/contrast) above the layer with the selection and link the 2 layers so that I can go back to make further adjustments if needed
HTH

How to select the latest date for a field in CR?

Dear all expert.
I need to develop a report where it only show the latest date. For example, I had a report, it contain a customer description and bussiness transaction posting date.
Customer description           BT posting Date
A                                          03/10/2010
A                                          15/10/2010
A                                          23/11/2010
A                                          24/12/2010
A                                          30/12/2010
A                                          15/02/2011
A                                           20/03/2011
B                                           20/03/2011
B                                           02/04/2011
B                                           08/04/2011
B                                           11/04/2011
But in CR, i Just wan it to show me:
Customer description          BT posting Date
A                                         20/03/2011
B                                         11/04/2011
I just want to show customer with the latest BT posting Date, How can I do that?
Thank You.

Hi Alex,
If you want to show the data only in Detail other than group then you may follow the following :
--Create a group on Curstomer Descripton
--Createa fromula : Maximum(,)
--Go in Section Expert -- suppress condition -- then give a condition like :
<> Maximum(,) // 'not equal'
This will suppress other dates and give you the latest date on your detail.
Thanks,
Sastry

Can anyone give me a code sample for enhancing a text datasource

for some reason it's a little different than using the regular transaction to master data user exits.
Thanks!

Hi,
Rarely guys used it.."EXIT_SAPLRSAP_003"
In one forum, i read that 002 will support the text datasource too..try it and check
check this:
Re: Unable to debug user exit in CRM BW (EXIT_SAPLRSAP)
EXIT_SAPLRSAP_003

How to change Selection Criteria for a Business Content Data Source

Hi Experts
I am extracting data using 0CO_OM_CCA_9 Datasource. I would like to be able to select a range of Company Code (BUKRS) to pull in, but I cannot find a way to make certain fields available as selection criteria. When I go into "Change DataSource", I can unselect fields, and even select certain fields, but the option for most is grayed out.
How can I make this field available as selection criteria in Infopackage?
Thanks for the help.

Its not that simple to enable a new selection for a Business Content Datasource, if its not already provided by SAP. Enabling new fields for selection should be accompanied by corresponding extractor code changes to process those field selections and use those selections throughout the extraction process.
Solution for your problem would be create a custom extractor with all the logic of standard extractor (function module BWOMD_GET_CTRCSTA1 for 0CO_OM_CCA_9) and extra logic to process the new fields for selection.
Hope it helps!

Selection Criteria in Infopackge for enhanced field of DATASOURCE in R/3

Similar Messages

Maybe you are looking for