Delta not populated for Enhance field

Hello Friends,
We have a requirement to enhance Sales Header (2LIS_11_VAHDR) to retrieve Customer Group (KDGRP). Hence i enhanced the structure Sales Document: Header Data (MCVBAK) and included the field ZZKDGRP. Also wrote the Customer exit to fetch this data from VBKD-KDGRP.
Now the problem that we are facing is that when any of the standard fields of 2LIS_11_VAHDR are changed we get proper Delta records, but if the user only changes the Customer Group (KDGRP) of a Sales Order we wont get a Delta record.
I referred the Blog https://weblogs.sdn.sap.com/pub/wlg/1591but [original link is broken] would like to know if there are any other solution to handle such a scenario.
Any help will be appreciated.
Note: This field is also available through VA02 so can we make some screen level changes to trigger a Delta when this field value is changed.
Regards,
Nitin S.

its checking for the LO fields to be change to show you delta but not puling delta when one of your feidls change.
create a temp table like C-t_Data in r/3 load all Lo data in it and check ofr this fiedl data to be chnaged ..you will have to write logic in cmod that if previous value is different from new value then update tempt_table and append temp_table data in to C-T-data. hope that helps ..

Similar Messages

Delta records are not populating for enhanced fields in 2LIS_17_I3HDR

Hello,
       I have an issue with 2LIS_17_I3HDR datasource, i have enhanced the DS with Zfields, these are populated from AUFK through user exit. When i fill setup table, i can see the values being populated for enhanced fields, but for delta records, i dont find any values for these enhanced fields, even though the values exists in the AUFK table and i even tried degugging the user exit code, it doesnt go through it during the posting of delta records.
Can some one give some suggestion on this issue.
Thanks,
          Pavan

Hello Ravi,
                 Yes, delta records cannot be populated by enhanced fields. Here the issue is different,
i have added a closed date to the extract structure, this is order specific, so when i create a new PM order after the full load, and release the order and close it, the AUFK table get an entry for closed date, my exit compare the object number of the extractor to object number in AUFK and get the closed date value to the DS, this is not same as enabling delta on the enhanced fields (which cant be done).
Thanks,
            Pavan

Data not populated for Enhanced field

Hello,
I had done enhancement by adding field to the LO Datasource.
Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
What is the reason that i am not able to see the data for the enhanced field in RSA7?
Thanks in Advance!
Regards
M.A

Hi M.A,
This means that there is no delta data for that field.
If there is no change in the data for that field then you cannot see any data in RSA7.
Check in the Delta repetition in the RSA7 for any data for that field.
Regards,
ravi Kanth

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Value is not populated for new field in RSA7 from PI Interface

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Value not populated for new field - in RSA7 for PI interface in BW

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Delta problem for enhanced field in master datasource

Dear Experts,
I have a master datasource 0customer_attr. I have enhanced it with field sales group. Daily delta comes for this datasource.
But when user changed sales group for a customer from s1 to s2 then it is not coming in delta.
Still there is old sales group exist in BI for particular customer. In short , delta is not coming for enhanced field.
Please advise what should i do ?
Regards
Shweta

The problem is that no delta is posted to the message type for KNA1 in the bdpcv/s tables because the orignatting field is a KNVV field
So if KNVV was changed ie sales group it will not post a ale change pointer for KNA1 therefore the delta for KNA1 will not pick up any change
However if there was a change to KNA1 on the same day as the KNVV changwe then the delta will pick up the change
The way to get around this is to either use a KNVV delta datasource into BW and then enhance 0Customer that way via transformations into the customer infoobject in BW only
Or to put a user exit into the KNVV change on R3 to generate an ale change pointer for KNA1(ie every change in KNVV will generate a change in the KNA1 extractor)

Infotype Screen Control (T588M) not working for additional fields to contro

Hi,
I have a requirement to enhance IT 0002 with fields LNAMR, FNAMR and CNAME. Also field preferred language.
I have included LNAMR, FNAMR & CNAME as additional fields in the Include Screen 2040 elements, lay editor and maintained table T582c where i have assigned enhancement to the standard screen. These fields are getting displayed in infotype 0002
But the issue is Infotype Screen Control (T588M) is not working for these fields to control the display or hide.
Has any of you come across this issue? what could be the reason for this issue? Please suggest ASAP.
Thanks in advance.
Regards

Hi Experts,
Please help with your inputs and suggestions.
Regards

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

The value 1 is not allowed for the field variace key

Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.

Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja

Delta Enabling for Enhanced field

I have enhancement on standard datasource (Datasource is from Customer Service Appl and enhanced field is from PMCO table and its linked through OBJNR and OBJNR is Primary key in PMCO table and standard field in datasource). My question when users make any change to this field in PMCO table, this particular record is not being picked by delta. How should i make this field delta capable. Since OBJNR is generated is everytime a new order is created, and when they change at PMCO Table since there is no change in OBJNR no delta is picked up.
I have another option is to ask user to do pseudo change on order when they make changes on PMCO table. Is there any other option for this so system can dynamically consider this change.
Your answers are highly appreciated and rewarded.
Regards
Kunal

Hi Kunal,
   I dont think you will get delta for your enhaced field until main record is chaged.
   We can not ask to chage the record for Delta.
   Try this:
   Create one more ODS and load data(in Overwrite) using generic extraction from table PMCO(If you have change data and creation data, you can selectively pull).
   While loading data from your main extractor, assign values for PMCO field in BW update rules from this ODS.
Hope it Helps
Srini

Addition of a Field in EKKO/Data not getting populated for that field

Hi All,
I have added a Z Field in EKKO Table through the Append Structure "CI_EKPODB".
There are around 2000 records in EKKO and for all the records that Z field is Blank.
But, when I write a Select Query in Program to Fetch the Records where that Z Field is BLANK, I get only 50 Records.
The same happens when I Execute SE16 for EKKO by giving condition Z Field = INITIAL. I get only 50 records in the output.
Please help me understand why I dont get all the Records where that Z Field is INITIAL?
Is any customization required or is this a Technical Issue?
Please help.
Thanks in Advance.

hi rohan,
if you are adding a field in a table by append structure then make that field as ZZ instead of Z to differentiate it from normal fields.
now when you have created the field in a append structure then if have not checked the initial flag.thats why u are getting this data inconsistency.
this is because earlier 2000 entries are prestent in the table , now when you add another field in the table then that field will not have value for those 2000 records.
now when you create the fiels select the init flag field,if you select this then new flag field will NOT NULL,so initial values will be filled for that field for existing 2000 records.
Note : NULL and INITIAL are different things, NULL means not defined and initial means which is having its initial value.
check that init flag and u will get those 2000 records, you are getting inconsistent data now becuse value for that field is null ie not defined.
hopr this will solve ur post and u wil get the concept of append structure.
Thanks and regards,
Tanmaya

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Delta not populated for Enhance field

Similar Messages

Maybe you are looking for