Services for document

Hi all,
we have to work with documents and i'm trying to use the services in the document object like:
ECC_DocumentCrtRC -> for create documents
ECC_DOCUMENTIDQR -> for read documents
My problem is that i don't know what parameters I have to use, and I haven't found any documentation related with that.
Have someone used these services to work with documents?
Any help will be fantastic.
Thanks in advance and best regards,
Eduardo

Hi Joe,
SharePoint 2013 includes document management features that you can use to control the life cycle of documents in your organization — how they are created, reviewed, and published, and how they are ultimately disposed of or retained. There are some features
needed to be enabled for some requirements(ex. Document Set, versioning, content approval etc.). There is an article which will guide you in planning the document management features of your solution that is based on SharePoint 2013. Please take a look at:
http://technet.microsoft.com/en-us/library/cc263266(v=office.15).aspx
For uploading a document into SharePoint, you need to create a web application and create a site collection for the web application in Central Administration. After that, open the top site of the site collection, you can upload documents into the existing
library "Documents", or can create a new document library, then upload the documents into the new library.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Problem with web service for document template

Hi, I am trying to set up a web service to use with a word template (I use the template designer). The problem is that when I press the 'Test Page' button in the web service tool, I get an error : "Error retrieving URL to Web service test page ...'. I have searched the forum and made sure that the correct J2EE hostname/port is being used, as well as making sure the user/ password is set for the service. I have no idea how to proceed, please help me!
Best Regards Eva
ps. I can press the WSDL button in the web service tool and the web page opens correctly displaying the xml. Also, I create the template with static text as well as the posts requested by the service and the word document opens displaying only the static text...

Hello,
Where have you made this setup. Is it in the WSADMIN or in the SOAMANAGER??
Regards,
Varsha

Services for Object - Store Business Documents (issue with XLSX files)

Hi,
We are using the Services for Object > Store Business Document to be able to drag and drop files into (for example) Sales Inquiry, Sales Order, Sales Quotations etc.
Within OAC2 we have set up the global document types and these have been linked to the relevant Object Types and Content Repositories in OAC3. We have also set up the Content Repository as Document Area 'ARCHLINK'.
The ArhciveLink Basic Settings in OAG1 have the 'Always Copy Document Class from Document Type' set under Storage Settings.
The issue we are having is with XLSX document types. When we drag and drop the XLSX documen type using the Store Business Document the file is stored against the Sales Order but when you come to view the attachments MS Excel opens but an error message appears saying 'Excel cannot open the file '******' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'?
We have reviewed SAP notes 1925897, 1739026 and 1145885 however non appear to give me a clear answer as to why this is happening?
I have found that if we unselect the option 'Always Copy Document Class from Document Type' in OAG1 then we can open the XLSX files.
As we have a significant amount of documents attached to various objects, what would be the implications of making this change agianst existing records and new records?
Any advice on this issue would be greatly appreciated.
Gary B

Hi David,
No joy I'm afraid!!
I added entry 'xlslx' with the relevant MIME Type, Application and Description into table TOADD for the ArchiveLink settings and also this entry was already in tables SDOKMIME and SDOKFEXT for KPro.
I then following the process via the Services for Object within VA12 (Change Inquiry) to then Create > Store Business document > Select the relevant Document Type > Drag and Drop the XLSX file into the empty box.
I then saved the record and tried to view the attachement but I am still getting the same message 'Excel cannot open the file '******' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'?
Our client is on componet SAP_BASIS release 701 Support Level 0014 and Support Package SAPKB70114 and I can see that note 1237688 is for SAPKB70112?
Regards
Gary

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

Content server for Document attachment through "services for object" Icon.

Guys,
I have typical problem in installation of Content server for storing external documents.
We all know that we can attach the document in SAP using the icon SERVICES FOR OBJECT. By this we can attach the document to the specific object we want.
-Since my client wants only document attachment method not to completely implement SAP DMS, I proposed this method of attaching documents through services for object method.
-If documents are stored though services for object ,The attached document will directly get stored in sap database(correct me if I am wrong) while in DMS it ask you to select the storage location while u check in for any document
-By storing the doc thru "services for object " For long run when we store the documents in sap database our system will drastically get slow down.
-In this regard I have a plan to incorporate external storage server.
-Now I should know that how I should customize content server configuration so that the attachment through services for object will store into this content server I need to know how to define Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port. (OACT & OAC0)
I appreciate for immediate solution and Points will be rewarded for sure.
Regards,
Murali.S

Hi Murali,
Don't Worry, its possible,
All attachments can be stored in SAP Content Server also, but through archiving process.
Set up a database storage system.
Preparation
Make sure that the HTTP plugin is active.
Transaction SMICM, "Display Services" function key (shift F1)). The list of services must contain a port other than 0 for HTTP.If not, you must adjust the relevant profile parameter.
Typical entry:
icm/server_port_0 PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
If no user is defined, then use transaction SU01 to create a new user. Use the "System" user type.Assign
the SAP_ALL and SAP_NEW profiles to the user. (Eg: HRUSER/PLMUSER/PPUSER etc)
Transaction SICF, select: default_host - sap - bc -contentserver. Select the function to display/change the service. Make sure that a user is defined.
Using the relevant data from the newly created user, maintain the anonymous logon data for the
/default_host/sap/bc/ service and save & activate the changes in transaction SICF. Double click on content server and give the user name which has been created (HRUSER/PLMUSER/PPUSER/MMUSER etc)
Check the system PSE.
Start transaction STRUST. Expand the system PSE. The system PSE must be "green" for each application
server.
Determine a suitable exchange directory.
The exchange directory must be accessible from each application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application server (for example,
server\share) is sufficient. You can generally use the global directory
(profile parameter DIR_GLOBAL).You can use the RSPARAM report to determine the profile parameters.
Setting up the storage
Create a table for storing the data. Using transaction SE11, create a copy of the SDOKCONT1
table. If you want to create the repository database, you can name the table ZCONT_DB, for example. Save the
table as a local object. Activate the table.
Create a repository.
Use transaction OAC0 to create a new repository.
Use the following parameters:
Repository Max. two characters, for example, Z1
DocArea: ARCHLINK
Storage type: R/3 database
Storage subtype: normal
Version no. : 0046
Contents table <table name> for example: ZCONT_DB
Exchange directory <directory name> for example:
server\share\
Make sure that the exchange list ends with a \ (or /on Unix).If you are using a variety of platforms, you must use transaction FILE to define a suitable logical file name and use this name. Save the settings.
1. Maintain view table TOAAR_C, via SM31
 Cross client table displayed as information, forget it
2. In field 'StSytm' you must entered 'Z1' as your system need, or anything that you need but you must configure HR Archive link too.
3. In field 'Arch.path' (direct above Spoolpath), entered path in your system, this real path in your operating system. May be you should confirm to your Basis consultant where exactly you could store picture files. So if you enter '/', your file exists at root directory at your UNIX system.
4. Choose 'File store' radio button
5. Save.
First
1. You have to create a number range for SAP ArchiveLink.
 IMG: Basis Components-> Basis Services -> SAP ArchiveLink -> Basic Settings-> Maintain number ranges
 (Trxn OANR). Create number range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
 IMG: Basis Components->Basis Services->SAP ArchiveLink->System Settings->Maintain document types
 (Table TOAVE, Trxn OAC2).
3. Document type HRICOLFOTO must be linked to object type PREL and Infotype PA0002.
 IMG: Personnel Management->Personnel Administration->Tools->Optical archiving->Set up Optical Archiving
 in HR. (View V_T585O, no Trxn). In the first two columns there are minuses, the third (Date) has
 a plus - don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type
 PREL. IMG: Basis Components->Basis Services->SAP ArchiveLink->Basic Settings->Maintain Links (Table
 TOAOM_C, Trxn).
Test
Test the repository.
Use transaction SE38 to start the RSCMSTH0 report. Specify your repository (i.e. Z1) and start the test.
The report must run without errors. If no problems occurred, you can use the new repository with Archive Link after you carry out the Archive Link Customizing. If problems do occur, check whether one of the related
notes helps.
For More Details :
http://service.sap.com/archivelink.

NOTE:- Screen Shots are missing, i was not able to paste here, One more thing is we did this for uploading a PHOTOS into Content Server, Similarly you have to create a REPOSITORY and Z-TABLE to bring all the Attachments from all the selected Objects and then route them to the CONTENT REPOSITORY.
Your Senior ABAP guy would help you in this, if not i may try to help you more by monday.
Regards
Rehman
Reward Your Points if Satisfied.

Services for Object - Create external document (url) 132 characters limit

Hello,
I have this requirement:
Maintenance people would like to relate a document on our portal on a work order to be able to print it with the work order.
My suggestion was to use Services for Object in the Order -> Create external document (url).
But the adress field cannot contain more than 132 characters.
I have URL longer than 132 chars:
eg: http://server.domain:port/irj/go/km/docs/documents/AAI/Gestion%20documentaire/Public/Entretien/Instructions%20de%20travail/EU-IT-01-02.pdf
What do you suggest me?
Thanks,
François

Thank you Pete but we are release 700 and this note applies to release 620 and older. I will try to find another note or another way.
In the meantime we use the short-ID of SAP Portal Documents which are long to retrieve but always under 132 char.
François

Services for Object: attached documents/ links cannot be deleted

Dear SAPfriends,
The deletion button at the attachment list of "Services for Object" does not work. Eventhough it seems that the documents/ links/ notes have been removed from the object (i.e. Purchase order, material etc), when you exit and re-enter at the attachment list the documents are still there.
I tried to delete them from OAER, still the same.
Any ideas?
Yr help will be very valuable.
Kind Regards,
Elly Leondi

Hello Mauro,
Thanks for yr reply.
That was the problem.
Thanks again.
Regards,
Elly

Services for Object/store Business documents in AS01

HI
We have a requirement to enable the services for object to attach documents to Asset master. We have made configuration in Trx OAC2,OAC3 for object type BUS1022. The ICON is appearing for AS02 & AS03 but not for AS01. We are 6.0 version
How can I aactivate that for AS01. Is it SAP standard or can we activate?
Please provide me the solution.
Thanks
Sailaja Ala

Hi,
Absolutely it is not possible.
The services for object is only visible, once the original object is created.
Even if you check for normal F-02 entry also, it wont be visible during entry, but will be visible after posting if we go thru FB02 or FB03.
Any attachment can be assigned through the services for object, is possible only after creation of the dependent / original data.
So for AS02 and AS03, the dependent data has to be there in the DB, which has been created with AS01.
Thanks,
Srinu

Attaching a document to notification using service for object

hellow members,
i look for a table to let me know if a document
is attached to specific object (in my case it"s
a notification).
best regards,
avi
Edited by: avi koren on Jul 16, 2008 9:40 AM

Hellow Johannes,
thank you for your repling.
i don"t think that this is the direction.
In lots of objects in the SAP like a notification or a material,a button call "service for object" is available provide
some functions like
document attaching.
How i can see this attachments?
I think that the answer should be close to the table SOOD.
regards,
avi

Transfering Documents (mostly .jpg) from Services for Object to DMS

Hi,
We are presently in the process of finalizing document attachments via DMS system. We still have a high quantity of documents that were attached through the "Services for object" function (mostly .jpg ) and would like to transfer these to DMS without having to export them for every single object (mostly equipments). Is there any way to do this i.e. mass export of these attachments with their link (ex. at the top of the dialog box: AttachmentFor0000000...) so that they remain .jpg to be able to re-upload quickly in DMS system ?
Thanks for your help !

we have in the current system merger project a developer from SAP who is programming this feature for us, so I am pretty certain that there is nothing in standard that can do this job.

Services for object for a custom document

Hi everyone,
We have a custom transaction to create a custom document called enquiry. Upon saving, the document number will be generated and stored in a table. I would like to add the functionality of Services for Object in the transaction to be able to attach documents to the enquiry. I would like to ask if it is possible to create a business object for this custom document to be able to utilize the Services for Object functionality.
Thanks!
Eric

you can choose to create BO for this or simply have a another identifier for this object and youc an use class OT to upload documents to BDS.
all you need is call of this FM whicih will automatically put the icon for GOS
SWU_OBJECT_PUBLISH
alternatively you can use class cl_gos_manager
Raja

Repository service for counting downloaded documents

Hi,
 I want to write a repository Service for counting downloaded documents.
In addRepositoryAssignment method, for which resource event type I have to register.
(i.e)
mgr.getEventBroker().register(this, ResourceEvent.??);
or any other way to do this.
Regards
Ganesan S

Hi Ganesan,
Seems you have an index on the resources.
I had a look into the repository service implementation on the blog. THis is what could be the reason:
In received method you catch the GET resourceEvent (first hit). Then you get the resource in question and change/increment the property on this resource. For TREX in fact you change the resource. The event is catched by the IndexService and the TREX asks the CM for the document (second hit).
I would suggest to store the hitcount in an Application property (this does not change the resource and fires no ResourceEvents) as here (could be some compilation errors - I haven't tested it but it should work):
public void received(IEvent event) {
IResourceEvent myEvent = (IResourceEvent) event;
try {
 IResource res = myEvent.getResource();
 // get the app property service
 IRepositoryService repositoryService = repServiceFactory.getRepositoryService(res, IWcmConst.APP_PROPERTIES_SERVICE);
 IApplicationProperties aApplicationProperty = (IApplicationProperties) repositoryService;
 /// app property name
 PropertyName propertyNameHitCount = new PropertyName("http://sapportals.com/xmlns/cm","hitscount");
 //get the old value...
 IAppProperty hitcountOld = aApplicationProperty.getProperty(propertyNameHitCount, res);
 long hitcount_l = 0;
 if(hitcountOld!=null) {
 hitcount_l = hitcountOld.getLongValue().longValue();
 hitcount_l++;
 // set the new value...
 AppProperty aAppProperty = new AppProperty(propertyNameHitCount, new Long(hitcount_l), null, true);
 aApplicationProperty.setProperty(aAppProperty, res);
} catch (Exception e) {
 e.printStackTrace();
I hope Detlev is ok with my solution
Romano

SAP Document Attachment - Services for object

Hello Guys,
Find the below attachment about a PPT on " services for object"
<a href="http://verbellacmg.com/asug_2006_walls_404.ppt">Services for object icon - ppt</a>
Would be highly usefull.
Regards,
Murali.S
Reward if its Usefull.

Hi, There is no standard report or transaction to get this other than looking at the object through the transaction that creates those attachments, also you can go through SAP OSS note 530792
Refer below link for creating a report for your requirement
http://it.toolbox.com/wiki/index.php/GOS_Finding_Attachments_or_Links_to_an_Object_in_SAP/ABAP
For second requirement it can be handled by Authorization, discuss with your basis guys

Check while MIGO, to check document is attched through SERVICE FOR OBJECT

Hi,
While creating a document through MIGO,
I want to apply a check that during 101 movement type if document is not attached , system should throw a error message
'Attach document first'.
Is it possible ?
If yes , then through which progess BADI or user-exit ?

Hi
The authorization objects for attachment to material are as following:
Object Class BC_Z Basis - Central Functions
Authorization Object: S_BDS_DS
Authorizations for Document Set
Authorization Field ACTVT : 30
Authorization Field CLASSNAME:BUS1001
Authorization Field CLASSTYPE:BO
other ACTVT
01     Create or generate
02     Change
03     Display
04     Print, edit messages
05     Lock
06     Delete
24     Archive
25     Reload
30     Determine
70     Administer
78     Assign
82     Supplement
Note: That to be able to attach user should have MM02 authorization..
Best Regards
Hope it helps

F4 help not working in custom backend service for PD form

Dear All,
Iam working with the Create position HCM PD form and i have a requirement to add two fields, one for the company code and the other is for the cost center and then create the relationship betwee the position and the cost center when the form is submitted.
I have defined a generic service and created an enhancement implementation and linked this generic service to the imppementaion. I have written the logic for the F4 help for the fields in the method GET_HELP_VALUES, i have written the scripting for the drop down field in the form to trigger the F4 help in the form.
When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form.
But my current problem in that he values are not getting passed from the method to the field on the screen. I have worked on quite a few scenarios for F4 help and doing validations in the implementation in the PA form and i have seen this functionality working fine.
My problem here is that i am unable to understand why the F4 value help is not working in my form. The standard PD service SAP_PD is also being used in the form to have the dropdown values for the account assignment feature.
Could you please suggest me with some clues to fix my issue? i can share more details for further analysis.
Thanks.
Best regards,
Sridharan

Hi Chris,
Thanks for your inputs. please see my reply to your questions
First....are you sure you have "marked" that field as possible for F4 help?
Reply: Yes
Second...are you populating the help values strictly from that method...ie. not also using do_operations method to do it. If you refer to the documenation, it points out that trying to use both can cause issues.
Reply: i am using only the GET_HELP_VALUES method and nothing written in do_operations.
Third...when you debug your method, do you "see" the help values actually populating and as you say "not coming back to the screen"? I would check this first to make sure that there are actually values being found (ie. the logic within your service is correct).
Reply: i have put the external break-point in this method and when the form in opened for processing by the HR admininstrator,the form openes up and the control is not being sent to the debugger. I have written the scripting in the exit event of the events and scripts as suggested in the SAP help document. SO when i click on the dropdown field in the form, the debugger starts and executes the method and the code executes, then no values are populated on the screen.
Fourth...are you using any generic services for populating help values as well. HCM P&F has a nasty habit of "if one GS fails, they all fail" so often, your service might work fine but an error in another makes yours appear to fail as well....hard to debug and find those kind.
Reply: Yes i am using the generic service mainly for the purpose of F4 help. I do not see any issue with other gneric services as i have implemented a few generic services for PA forms and they are working fine.
Fifth...oops...forgot the obvious one...make sure it isn't a security issue...ie. make sure you have access to read the cost centers you want.
Reply: I dont get any auth error in SU53 while i test the process in R3
Lastly, you said:
"When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form."
You actually should be able to do this using an Advanced/Enhanced Generic Service (if this is in fact the step at which you want a true update to occur). Just a thought.
Reply: Could you please give some more information about this, how can i achieve it in advanced generic service.
Appreciate more thougts from you Chris!
Thanks,
Sridharan

Services for document

Similar Messages

Maybe you are looking for