Show DataTips for each series

Is there a way to customize the DataTips for each series in a
chart? I have a column chart that has a line series in it. The
columns display actual data, but the line shows an average.
Currently the datatips are set to show the column chart values,
even when a user hovers over a line chart datatip. Is there any way
to have the datatips for the lineseries display the lineseries
data?
I know I could create a DataTipFormatter that included both
the column data and the line data at the same time, but I would
like them separate.

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
L (Flex 3):
The LineChart control represents a data series as points
connected by a continuous .... whose contents are highlighted when
a user moves the mouse over it.
Link:
http://livedocs.adobe.com/flex/3/langref/all-index-L.html
Is it possible to use data labels with line chart? - Flex
India:
Feb 27, 2008 ... I want to create a line chart which shows
all the labels, regardless of the mouse pointer.
showAllDataTips=true works but the result is
Link:
http://groups.google.com/group/flex_india/browse_thread/thread/709c9651ad7c9062
mx.charts.LineChart (Flex 2.0.1 Language Reference):
Specifies the distance, in pixels, that Flex considers a data
point to be under the mouse pointer when the mouse moves around a
chart.
Link:
http://livedocs.adobe.com/flex/201/langref/mx/charts/LineChart.html
Print Page - Disable datatip but keep mouse event on line
chart:
Flex and ActionScript 3.0 => Flex Charting => Topic
started by: Sablotron on 29 July 2008, ... Title: Disable datatip
but keep mouse event on line chart
Link:
http://www.flexdeveloper.eu/forums/index.php?action=printpage;topic=895.0
[#FLEXDMV-1683] dataTipFunction for LineChart is not executed
when:
Mar 12, 2008 ... Set dataProvider for LineChart with one
datapoint 3. Set a dataTipFunction for the LineChart Actual
Results: Datatip does not show on mouse
Link:
http://bugs.adobe.com/jira/browse/FLEXDMV-1683
Disable datatip but keep mouse event on line chart |
flexdeveloper:
Aug 6, 2008 ... Disable datatip but keep mouse event on line
chart, help forums for developers working with ActionScript 3.0,
Flex 3, Flash CS3.0, and AIR.
Link:
http://www.flexdeveloper.eu/forums/index.php?topic=895.msg2716
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

Similar Messages

Dynamic series in flash chart & color specified for each series

Example of data:
Date     Series 1     Series 2     Series 3     Series 4     Series 5     Series 6     Series 7     Series 8
A     12     22     23     22     22     10     10     10
B     10     9     55     8     8     20     20     20
C     55     2     5     88     5     15     15     15
In excel, I can get a stacked horizontal bar chart with the numbers of different series stacked and it is easy to specify the color for each series (it works with Dephi aslo).
I use a PL/SQL to generate the dynamic series for the chart. And in my application, I need to show some serires with the same color (group of series, each has a specified color). One of the solution I am trying is to input a fixed color sequence and loop it many times in the custom color theme and then insert dummy series into the SQLS. But this could be a disaster while the number of group goes up.
Anyone has better idea on this? Or is this a limiation of apex?
Thanks.

As I tried, apex can support 300 series at most. Dynamic series here is not a good solution still.

My iPhoto screen previously showed thumbnails for each film roll. Now I only have individual pictures. I have lost my film roll categorization, though I have tried to sort by film roll. How do I get back to thumbnails within each film roll?

My iPhoto screen previously showed thumbnails for each film roll. Now I only have individual pictures. I have lost my film roll categorization, though I have tried to sort by film roll. How do I get back to thumbnails within each film roll?

what version of iPhto? Of the OS?
there is a thumbnial size slider in either the lower right hand or left hand corner of the iPhoto window - does sliding it resolve your issue?
LN

APEX multi series line chart with different markers for each series

I am using APEX 4.0 and trying to create a multi-series line chart that will have a different for each series.
Does anyone know how to accomplish this?
Edited by: user4635837 on Apr 19, 2011 7:22 AM

Hello -
It is possible to do.
Another user in this forum has written some code snippets to assist in creating your own custom XML for charting. That reference can be found http://apex.oracle.com/pls/apex/f?p=36648:30:418355095936797::NO:::
Look this over and it should get you moving in the right direction.
What you are trying to do isn't terribly difficult. In fact, I did it fairly easily as can be seen http://apex.oracle.com/pls/otn/f?p=28155:4:362637005964920:::::
First, create a Hidden page item.
Next, create a process that runs before regions
That process will create the XML for your line chart and store it in the hidden page item. Use the above references for assistance in setting up the PL/SQL in the process
Then, create your custom XML for your chart. Replace the #DATA# tag in the custom XML with your hidden page item.
It is a bit daunting at first, but once you get the hang of it, it really isn't that bad.
Austin

Tooltip for each series of Business Graph in webdynpro

Hi Experts,
Here In the Business Graph of webdynpro, on x-axis am taking sales order&corresponding purchase orders on each day
and in the y-axis am taking Prices...Iam able to display successfully,Here the requirement is whenever the user place on
the peak point of the column(or tooltip of each series or at edge of the column either it is purchase order or sales order).We need to maintain
the sales order amount(if the column is sales order) or purchase order amount(if the column is purchse order)....
anyone could suggest me suitable solution for this...thanks in advance....

OK! Its done! The solution does not help exact, but it gives my the way! With the coordinates of the MouseEvent I can get the Value of the current table row and set the ToolTip text new. Teh ToolTipManager automatically repaints the ToolTip whit the new text and position.

Show tech for 4000 series switch

All,
The issue is i have widespread network connectivity problems that seem to be pointing to a switching situation. Our SQL connectivity to 2 highly visible and mission critical applications are seeing hiccups which are basically screwing up data. I think i see some things but i want to get some other feedback.
A few tidbits of information: the counters were cleared a week or two ago.
Should the CPU utilization be this high on a 4000 series without seeing performance degradation as well?
Regards,
Nate

Nate,
From my experience your CPU utilization doesn't look out of line. This document can help you troubleshoot high CPU usage.
http://www.cisco.com/warp/public/473/82.html
Also, what interface(s) are the systems connected to? Because I would look at the speed/duplex on both the switchport and the end device(s). Here's another Cisco document to help you.
http://www.cisco.com/warp/public/473/46.html
Steve

Hide datatip for some valus or series

Hi!
I have a column chart with 2 stacked series. I want to use
datatips for the series in front, but not for the one on the back.
how can I realize this? if I return an empty String for the series
in the background, I still see a small datatip square and the
marker for the datapoint. I could live with the marker, but not
with the empty square datatip appearing. Can someone help me?
THX

<mx:ColumnSeries ..... interactive="false">
This solves the porblem, if anyone else has a similar
request.

Device summary pane does not show capacitiy totals for each category (audio, remaining, photos, etc.)

When viewing the summary pane for my ipod, the summary bar does not show totals for each category (audio, remaining, photos, etc.). It does not show when hovering over each category either. Seems to be some type of bug with itunes. I have tried re-installing itunes but that does not work. How do I fix this?

Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

Function returning SQL query for mutiple series in a chart

Hi,
I would like to know if there is a way to specify a single PL/SQL function returning the queries for multiple series in a 2D Line Flash Chart. I have multiple series in my chart that has different values in the where clause. I can write a PL/SQL function that can return all these queries in one shot. Is there anyway that I can specify this function as returning the queries for all the series in the chart?
As an example, assume that I am using the following three queries for the series in my chart:
select deptno, count(*) from emp where deptno = 10 group by deptno
select deptno, count(*) from emp where deptno = 20 group by deptno
select deptno, count(*) from emp where deptno = 30 group by deptno
I can't write a PL/SQL function that returns a query in the multiple series syntax (SELECT link, label, series_1_value [, series_2_value [, ...]]FROM ...) as I am using an aggregate function and my where clause is different for each series.
Thanks,
Rupesh

Hi Roel,
Thanks for your reply. I am already using an analytical function (RATIO_TO_REPORT(COUNT(*)) OVER () ) in my actual report. My problem is that the query for one series differs from the other only in one where clause. I will be able to dynamically able to generate all the queries for all the series in one pl/sql function. But the chart definition screen does not allow us to define a single function that returns queries for the all the series - possibly seperated by some seperator like S1: select.... S2:select and so on.
Regards,
Rupesh

Default poster image for each exported video

Anyone know of a way to change the default "poster image" of each video that is exported to the MobileMe web gallery? The default icons that show up for each movie in my gallery aren't very good and I'd like to change to a different frame if possible. I know you can do this easily for photo albums by setting the key photo but cant find a similar way for videos. Maybe there is a setting in iMovie that I'm missing?

So I wasn't going mad after all - Brightcove's player default is with greyed out image
"the overlay button is standard for all our HTML5 Players and this cannot be changed through the publishing code or the player settings. the main reason for this being there is to indicate the user that it is a clickable image that loads the video. If you wish to replace that image, you would have to implement some custom code that would display the image of your choice above The Brightcove player and add some action to replace the image with the video when it is being clicked. An example of this you can find here:
http://distractedtype.com/test/replaceImage.html
It uses some javascript to make one div with the BC publishing code visible, when the image has been clicked."

Not all my titles are showing for each data set

Hello,
I have made a column graph for 4 different data sets, I need the titles to show for each data set along the X axis. I highlight the titles in my data when making the graph, however, only two of the four are showing. Is there any way I can get all 4 to show?
^^^^ Need the title after Baseline and after Numb Hand
Thank you

Try clicking the chart then the blue 'Edit Data References' rectangle, and then in the lower left of the window switch from 'Plot Columns as Series' to 'Plot Rows as Series'. Then switch back if needed. All four should then show up.
SG

I need to show grouped id and only the max order value for each unique id

select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select #Temp1.id, max(#Temp1.[OrderOfVisit]), #Temp1.VisitNote
from #Temp1
group by #Temp1.id, #Temp1.OrderOfVisit, #Temp1.[VisitNote]
ORDER BY #Temp1.id
drop table #Temp1
---I need to show grouped id and only the max OrderOfVisit for each unique id, and the VisitNote for each OrderOfVisit
----------------need help-------------

Sounds like this
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select id,OrderOfVisit,VisitNote
from
select #Temp1.id, #Temp1.[OrderOfVisit], #Temp1.VisitNote,ROW_NUMBER() OVER (PARTITION BY #Temp1.id ORDER BY #Temp1.[OrderOfVisit] DESC) AS Seq
from #Temp1
)t
WHERE Seq = 1
ORDER BY id
drop table #Temp1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
For Home Sharing to work you need to
File > Home Sharing > Create Home Share.
You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
Home sharing will then work

Show DataTips for each series

Similar Messages

Maybe you are looking for