SLD - Technical System general settings not all filled..is this a problem?

Hi all,
I don't really have any experience with the configuration of SAP PI, I just do some maintenance and small adjustments from time to time.
I noticed in the SLD in the Technical System settings of the AS JAVA that the following fields were not filled in the general tab:
I'm a bit worried since these fields are filled on our test environment, on our production environment they are not...
Installation Number: *** not yet assigned ***
System Number: *** not yet assigned ***
I can't just add this info, it seem I have to make remove the existing one and create a new entry.
Everything seems to be working fine so I'm a bit reluctant to try and chance this if it's not necessary.
So my question is, could it cause a poblem further on if these fields are not filled?
If so, can I fill these fields without removed the existing entry and creating a new one?
Thanks for any feedback provided.
Cheers,
Benjamin

Hi Michal,
thanks for your reply.
Would this be done via the SLD Data Supplier Configuration: SLD Data Supplier in the NWA ?
I don't have access to this in our production environment right now so I can't try.
If so, I'll try it later with a system admin.
B

Similar Messages

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

SLD Technical system data in ABAP table?

Hi All,
Can some one guide me ABAP table name where I can see all the SLD Technical system entries?
Or can read SLD Technical system entries via some BAPI/RFC.
Regards

Check LCR_GET_BS_DETAILS. In se24 check for Cl_SLD* , you will get some classes which will help you get the information.
What are the Technical system data you are looking for ?
In program SXMS_PF_GET_OWN_IS_NAME_MC , go through the subroutine get_sld_content.

I can see all of the thumbnails in my library but when i click on photo it becomes an ! not all photos do this but wondering if there is a fix

i can see all of the thumbnails in my library but when i click on photo it becomes an ! not all photos do this but wondering if there is a fix

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto do you have? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

My iPad 2 used to connect to my wifi and now will not at all. Prior to it becoming completely nonfunctional I could get it to connect by restarting it. Then that didn't work anymore so I went into general settings reset all network settings.

Prior to it becoming completely nonfunctional I could just restart it and it would connect properly to the wifi. Then that work around stopped working. Then I went into general settings and reset all network settings and that worked for a while. When that stopped working I let the battery drain completely and then after a full charge it worked again for a while. Now nothing. What should I try next that will hopefully fix this issue more permanently?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS3991 I have restored my mini i pad after it would not let me get in and I cannot get to the settings or general settings at all I cannot get into my i pad at all what do I need to do?

I was in the general settings on my ipad a couple of days ago and when I signed out and wanted to come back on i could not get into my pad at all I have changed the id and password three times and i still cannot get into the pad. Is the general setting keeping me out? I put the passcode in and I still cannot gaet in, is the passcode my password if so why can I not get in?

Have you checked to make sure Accessibility features are turned off? See this article for more information.
http://support.apple.com/kb/HT4317
B-rock

SLD - Technical System Wizard - Select System: Only None (Standalone J2EE)

Hi, I want to connect to some RFC-Modules on a SAP/R3 System from my NetWeaver Web DynPro Application. Therefore I have to create JCO-Connections for the Models I created (MODELDATA_DEST and RFC_METADATA_DEST). For this I have to define the System I want these JCO-Connections to connect to in my SLD which I'm trying to do using the "Technical System Wizard". (SLD -> Technical Landscape -> New Technical System -> Web AS Java (because I'm developing a Java Application).
In the next screen I have to specifiy the location of my Server. I thought, that here, I have to define my SAP/R3 Server to which the JCO-Connections for my two models shall be connected. But the only option I can choose for "Web AS ABAP" (The ABAP System where my RFC-Modules are stored I guess) is "None (Standalone J2EE)".
Why is that? Or am I missing something? I thought I have to specify the SAP/R3 System containing the RFC-Modules here and not my local NetWeaver Server.
Thanks for your help
Thomas

Hi,
there seems to be a misunderstanding here. For JCO to work you need to set up the ABAP-System as a technical system in SLD, otherwise the Java-System is not able to determine information like Hostname and Portnumber for the RFC. Of course it's good to set up your WAS-Java in SLD as a technical system as well, but for the JCO the ABAP side is more important as far as I can see.
To have a clean start I suggest that you set up all involved technical systems in your SLD.
Regards,
Jörg

PI7.0: SLD - Technical System of type "Exchange Infrastructure"

Hi Guys,
The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps
1. Switch to "Home" in the "Technical Landscape" view, and select the
"Exchange Infrastructure" technical system type there. Select all
domains and XI components for the host and delete these by selecting
them and pressing 'Remove'.
2. Restart the J2EE server. After you restart the server, the XI
components log on to the SLD again and create a new entity of class
"XI Integration Server".
3. To register the directory and repository again, you must also log on
to the two tools.
I have restarted the j2ee server and looged into the IR and ID but they are not automatically registered in the central sld.
central sld is on solmanger box. How to register IR, ID, RWB and central adapter engine under the technical systems of type exchange infrastructure ?
any help would be really appreciated
Thanks,
Raj

Hi Reddy,
i faced the same problem few days back...
check this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
and also cross-check the post installation steps.
In my case the Business system for XI was created of type web as java... but it should be of type web as abap.
Sachin

SLD-Technical system -Web AS Java

Dear All,
I am able create techinical system for Web As ABAP. And want to create Web AS Java. Will you please explain me procedure.

Hi,
Ideally you should not create any technical system manually. When you go to SLD Administrstion --> profiles --> Data supplier, here you enter your backend server specific data for e.g. host name, instance number etc, and then you restart your SLD.once this is done successfully then your technical system automatically gets available under Technical Syatems. you should follow the same for JAVA system.
Regards,
Ameya

SLD Technical System Process Integration

Hi XI Gurus,
I have a question regarding the 5th type of Technical Systems, Process Integration. Is it automatically generated once XI is restarted? In Note 764176, it's telling me to remove the PI technical systems. How can I recreate them? Will they be generated automatically or will we input them manually? Thanks!

Hi,
Ideally, you need to have 2 Technical System entries for your PI system and 6 entries for Technical System Type 'Exchange Infrastructure'.
the first category (i.e 2 systems) suppose to get deployed automatically using RZ70 (ABAP) and SLD Data Supplier (java).
And the 2nd catergory (i.e 6 entries) suppose to also get deployed automatically but in case, If you do not find them all here is the workaround to get them
1. If XI Integration Directory or XI Integration Repository not found then, Please start these tools from default tools page (http://<hostname>:<http port>/dir) upon starting these 2 components you will see them added in SLD
2. If Adapter Engine not found then, logon NWA, stop & start XPI Service: AF Core & XPI facade: Adapter Framework (Navigation - Configuration Management->Infrastructure->Java System Properties); this should help you get Adapter Engine
3. The other 3 entries, Domain, Integration Server and RWB should come and usually comes always with automatic installation.
4. If you still do see after following above instructions, i suggest delete all of them both Technical specific & Exchange Infrastracture" related entries from SLD and then re-deploy RZ70, push 'Collect and Send data' option from 'SLD Data Supplier' from NWA.
ofcourse, you can always follow the instructions provided in the note that you were refering.
Regards
Sekhar

Windows - Use system proxy settings not working as expected

Hi everyone,
I have a bit of an issue that I could use some help with. We currently have remote users that utilize an SSTP VPN connection to access our internal network. Once connected, those users are required to use an internal proxy server to connect to the Internet. The proxy server is Microsoft's TMG and utilized domain authentication.
On our remote Windows clients we have their Internet Options configured to utilize a proxy as follows:
Internet Options -> Connections -> LAN Settings -> No proxy configured at all
Internet Options -> Connections -> Highlight SSTP Connection -> Settings
Use a proxy server for this connection -> IP/Port of Proxy Server
Firefox and Chrome are both configured to use system proxy settings.
Here is my process to demonstrate the issues:
Remote client workstation is rebooted.
With the above configuration just after a reboot, a remote user that is not connected to the VPN can browse the Internet with Internet Explorer, Chrome, and Firefox. None of the browsers prompt for credentials.
A remote VPN connection is then established.
FF is opened and HTTP connections utilize the proxy server. However, HTTPS connections do not use the proxy server, but instead attempt to use the default gateway. FF does not prompt for credentials. FF is closed.
Chrome is opened and can access both HTTP and HTTPS sites without issue. No credential prompt. Chrome is closed.
IE is opened and can access both HTTP and HTTPS sites without issue. No credential prompt. IE is closed.
Here's where it gets weirder...
FF is then reopened. The VPN connection is still up. FF will prompt for credentials. Domain credentials are supplied and FF can now utilize the proxy for both HTTP and HTTPS connections. FF is closed.
VPN is disconnected.
FF is opened and cannot access the Internet as it is still trying to use the proxy server. FF is closed.
IE is opened and can access the Internet. IE is closed.
Chrome is opened and can access the Internet. Chrome is closed.
FF is reopened and can now access the Internet. FF is closed.
In summary, in the above scenario FF acts in an unexpected manner with regards to proxy usage when "use system proxy settings" is applied. However, Firefox begins acting as expected after IE is opened and closed. For example, connect to VPN, open IE, close IE, open FF, and everything works accordingly. Disconnect the VPN, open IE, close IE, open FF and everything works as expected.
Any insight you can provide would be appreciated as it is affecting our FF users and the sooner we can achieve resolution the better. As a note, we've also worked through this issue with WPAD and proxy auto-detect. I've intentionally removed these from the equation to simplify troubleshooting.
Thanks

Quick update. Added to a previously filed bug. Looks like it's assigned now so maybe we'll see a fix for this soon.
https://bugzilla.mozilla.org/show_bug.cgi?id=563169

SLD- Technical System Browser

Hi all,
When i go to the sld of my XI server and there inside technical landscape when i choose the technical system type as 'Exchange Infrastructure' number of application systems are displayed. I find tht there are application systems corressponding to Repository, Directory , RWB , IS and AE.
When are these entries getting added. I believe they are gettin created automatically but when. Is it at the time of installation.
Any kind of suggestion would be helpful

hi,
>>>>Is it at the time of installation.
AFAIK yes,
so don't need to maintain it manually later on
Regards,
michal

SLD Technical System

When we create a Technical System in the SLD, it will not accept a fully qualified DNS name, the name seems to truncate at the first period. (i.e sdn.sap.com turns into sdn).
Does anyone know how to work around this issue other than adding an entry to the host file?
Thanks,
Andrew

Hi Andrew,
Please read the "Parameter Help" for host name:
"By default, host names in SLD are written lower case without any network domain."
So I guess you can't give a full DNS name even if this may lead to confilicts:
"This implies to use different System Landscape Directories for network domains having name conflicts at this level"
Regards,
Michal Krawczyk
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/u/34500 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]

"Use system proxy settings" Not working on Mac OS X Snow Leopard

When I change the network location or when I select "Use system proxy settings" on the connetion configuration dialog.
Firefox is not using the proxy defined on the loction set on Mac OS X Snow Leopard.
I usualy change from work to home, at work I've a proxy and at home I don't, and it's a bit annoying to have to change the proxy twice a day. So I tryed this feature, but It's not working for me.
I've tryed also with Firefox 3.6 (I think) and didn't work either.

I run it from eclipse, and on debug mode i checked the value of
java.library.path, and it was ok.
Any way, how can i do what you suggested on mac?It's just a command line argument, but there's no reason to add it if your
java.library.path is ok. One of its componenents must be a directory where
your shared lib is stored, that's all. BTW, the Mac is unix based isn't it?
Shouldn't it be an .so file then? (just a wild guess)
kind regards,
Jos

SLD - Technical System Types: Third-Party vs. Standalone Java

Hi all,
can somebody explain what´s the difference between the technical system types
"Third-Party" and "Standalone Java"
Please give also one example for a standalon java type.
Thanks,
Kris

Hi Kris,
1. Third Party: Can be any Tech System. For example you want to send a xml message from a file adapter residing on your PC. You can define your PC as a 3rd party Tech/Business System.
2. StandAlone Java: WEBAS640 has bot Basis and Java Stacks. If you installed only the standalone java Stack on a server, then you define a standalone java tech system.
For more info check the XI-3.0 Help documentation.
Regards
Prasad

SLD - Technical System general settings not all filled..is this a problem?

Similar Messages

Maybe you are looking for