Smart form - convertion of english to japanees language

Dear abaper,
i have an language conversion issue in smart forms. what all iam writting and passing in english should be converted into japaniees language .
did any one face the problem.if so pls let me know to close my issue . i will be very much thank full to u.
regards
veera

yeah,
u can define SET LANGUAGE lang. in the initialisation of smartform.
here lang is the system defined language
hope this will be helpfull...
Regards,
Prashant

Similar Messages

Converting smart forms as a pdf in different languages

Hi Experts,
I have been created a smart form and later on i converted it to in pdf also, but how can i convert a smart form output into different languages (English(defualt), German, Italian, French, Spanish,). Can anyone tell me about the idea behind this or a simple demo program???????????
do i need to maintain each text on the smart form into these languages already through SE63 or somewhere any idea that can help me without translating the whole text into those languages, could be able to do pdf conversion.
Thanks and Regards,
Shakun

The OTF data needs to already be in the target language - the conversion process is a process of changing the document format only, not a translation tool.

Smart Form convert to Pdf and send to email

hi,
ive dev the smart for me21n. its working fine. Standard programme is SAPLMEGUI.
now new requirement is , convert the smart form to pdf and then sending the pdf through email to customer.
Can any plz tell me is there any stadard programme or else need to custmise the print programme?
Regards

Kirans belong to convert the smart form to pdf.
there is standard programme RSTXPDFT4
but after convert the form to pdf. i need to send it thorough mail.
iam checking other link one which is send by mr.naresh..
thank you
Regards

Problem in Smart form while printing it in POLISH language

Hi All,
I am facing a problem in SMARTFORM and SAP SCRIPT.
I have developed a form in EN language and converted that in POLISH language using SE63 . When the form is printed in the POLISH language "#" is coming for some special characters of POLISH Language . ( e.g. 'Length' should get printed as 'DŁUGOŚĆ' ' but it is coming as 'D#UGO##'')
Please tell me how to handle these special characters in POLISH Language.
Thanks

Hi,
To solve this Basis need to create a new output device type which supports Latin-2 character set (Device type to I2HP4) or change the existing one to support Latin-2 character set.
Thanks
Edited by: dipesh kothari on May 6, 2008 5:33 PM
Edited by: dipesh kothari on May 6, 2008 5:34 PM

Smart forms convert to pdf binary data

Dear All,
I'm working on smart forms integrations with .net and I need to send the smart forms PDF binary data though custom rfc .
For that i'm converting smart forms otf data to pdf in and pass this data through rfc but this idata is is not wokring on .net guys when they are converting this on pdf..
so is there any need of decoded smart forms otf data before passing through or i'm missing some basic step?
Please guide me?
Rg
Anuj

hi,
Have a look on this wiki:
[http://wiki.sdn.sap.com/wiki/display/Snippets/SmartformoutputtoPDFformat]
And maybe this one could also interest you:
[|http://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment]
regards
mickael

Smart forms in different languages

Hi all,
i have an issue
I hav to convert my smart form in 8 different languages.
i know se63 but i dont want to use it as i have to maintain texts manually in different languages in se63.
is there any FM or code with which i can convert my smart form in different languages.
my smart form is originally made in EN language n i hav to convert it to german , italian , french , spanish etc.
please tell me any SAP note no that would be really helpful.

Hello,
if you do to want to use se63, you have 2 way:
1. use modul text ( see Transaction smartforms, 3°option on the screen)
2. Use a standard text (so10 transaction)
I mean that on smartforms you have to use only this 2 kind of text and, of corse, translate it.
regards

PDF Form giving different data compare to smart form

Hi Friends,
There are few scenerion in my system where my application produce a PDF form (Smart Form Convert to PDF through OTF)
In some case when I execute/print the form it shows me all PO form represnt me a differnt PO form althought their smartform is showing up correct PO.
Please help me out what can be a issue.
-Rick

Hi ,
Like I have print of 5-6 PO then I am getting a refrence of some other PO in all print of these 5-6 PO.
for example...I have a print of series 1000000001 to 1000000005 then I am getting the details of other PO 1000000011 into all 5 print of PO starting from 1 to 5.
Note- I have a custom program which convert smartforms to OTF and send a PDF to mail id.
-Ricky

How to print a smart form in two diff languages runtime

Hi friends,
we have a requirement to print a smart form in two langauges one in english
and other in Spanish those selection has to given by check box condition.
pls send some stuff .
Thanks & Regards
Jagadeeshwar.B

hi! Jagadesh
1. Create two different Smartforms
2. In Form Atributes Option -->General Attributes -->Language Tab -- there is a Optiona to select a Particular Language.( To select Language) there <b>select the EN</b> for 1st optin and <b>ES for Spanish</b>, Normally it will be in To all Language.
3. Create a report with Radiobutton (bz Check Box have an attributes to check both the Options)
   when option1 = 'EN'.
        call form1 with EN language
when option2 = 'ES'.
       call forms 2 with ES Language.
Reward me if its useful.
Regards,
Nagulan

Need inputs : PO Smart form Bulgaria language in SRM

Hi Experts,
I need a couple of suggestions and guide lines for PO print out Smart form.
We have requirement for PO, print out should print in Bulgaria language if the PO Vendors is from Bulgaria country.
And if the vendor is other than Bulgaria country then it should print in the English.
We have already a custom smart form (English)which we have assigned it in BADI for the PO Print output BBP_OUTPUT_CHANGE_SF.
Do we have to create 2 different smart forms? One is for Bulgaria vendors and other for non Bulgaria vendors.
And Do need to assign the 2 different smart forms in BADI based up on the vendor country?
If I enter the fixed text (like labels) in Bulgarian language then it will automatically will print in Bulgarian language?
And what I have to do dynamic text (which I will read from the print program input data or data base tables) ? Is there any way for the translation for these dynamic texts?
And I tried to put some labels in Bulgarian language in the smart form, but I am not able to see in those characters in the print preview in the portal. Its showing as some junk characters asu201D#u201D. But I am able to see in Spool (GUI, SP01). Is it because of the Bulgaria Language pack is not there in my system
looking for your valuable inputs.
Thank you ,
Bharathi.

Ok here´s how it works:
In standard logic the output type gets drawn in communication language of supplier.
so for a bulgarian supplier, with communication language Bulgarian the output type will get drawn in bulgarian.
This means the bulgarian form will get processed and in the form text will be drawn in bulgarian language as well if you stayed with standard logic and draw texts with NAST-SPRAS.
in your print program in the entry routine, not any entry routine but the one which is customized in TNAPR for this output type, place following coding:
if nast-spras NE 'BG'.
nast-spras = 'EN'.
endif.
that should do the whole job.
and NO you have absoluteley NO chance to handle this in the form.
If you arrived in the form you are already in a certain language and it too late to do what you want to.
Edited by: Florian Kemmer on Jul 16, 2009 3:21 PM
Edited by: Florian Kemmer on Jul 16, 2009 3:23 PM

Output in Customer Language for Service Dispatch Note Smart form

We have upgraded from ECC 5.0 to ECC 6.0.
After the upgrade we are facing an issue in some of our Service related smart forms.
The version of the driver program is same in both the systems and the smart form is also same.
The customer's language is maintained in Customer Master data.
In the un-upgraded system, the forms were printed in the Customer language according to what is maintained in the customer master data.
But after the upgrade, in the new system, the form is being printed in English as opposed to the Customer language in the older system.
As I have already mentioned above, in both the systems, the driver program, smart form and Customer Language in the customer master data are similar.
Kindly suggest me the solution if anyone has faced a similar problem.

Hi, Actually I have checked in debugging and have come to know that during the upgrade, when I have downloaded the form from ECC 5.0 and uploaded it to ECC6.0, the Language option in the general attributes tab of the text modules is blank and hence the form is displayed in English only.
Is there any way that I can get the smartform uploaded as it is in the earlier system?

How to display Smart form in Multiple Languages ?

Hello,
Very Good evening!
How can I print the Smart Form in Multiple Languages like Korea, German and Japneese....
I got a requirement where I need to display the developed Smart form in these languages. As of now it is displayed only in the Language ENGLISH.
Any Suggestions will be appreciated!
Regards,
Kittu

Hello kittu....
I would recommend that you create a single Smart Form in the primary supported language (or the one which you're most comfortable maintaining forms). Embed all necessary logic in this form, and design it with the idea that it would need to be viewable in multiple languages .
Then use transaction SE63 to translate all necessary form components into each desired language -- one by one -- and they will all be bound together under the same form name. In my experience, a basic multi-column spreadsheet (put together with the guidance of professional translators) works well as a translation guide.
The advantages of a single, shared form include: consistent look and feel, avoiding dual maintenance for shared logic (or, in your case, up to 10x maintenance), and simplified output determination. On the other hand, a single form does constrain your design and can make for a more complex implementation.
Hope this is useful
Best of luck,
Bhumika

Smart Form Language Print Problem

Hi ,
i want to ask that in PO smart form if i am taking print preview. then vendor & Shipping Address are not coming in print preview...another fields are coming like tele & Fax No these are store in numeric value but these name1 and street store in taiwan Lang..
then data fetch from ARDC table but ARDC-name1 and ADRC-street store data in taiwan lang..so these two fields data is not displaying in taiwan lang during print preview but some other format is displaying like squrae shape.....
so plz send me solution...ASAP...
Thanks
Amit Nigam

Hi,
Pick up the Address using user log on language instead of adrc-spras Or the language which user wants to display on the form.
Alternatively u can also code the driver program in such a way so that, if the the sy-langu is EN pick the address in EN or pick the address in Taiwan language.
ADRC-Nation is set in such case.
Another solution is the master data for the vendor has to be first maintained in English and then international versions have to be maintained in various languages.
Thanks,
Rashmi

Need to convert a SAP Script to Smart Form

Hello,
I need to convert a SAP script to a Smart form.
I am aware of converting it but have a question abt print program?
Can the print program which is currently attached to the SAP script supprot the Smart form?
Could some one let me know if i can use the same program or need to do some modifications in it?
Pointa rewareded if useful.
Thanks,
Krishna

hi
t-code smartforms
utilities->migrate sapscript
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
Check these threads.
Smartforms -> sapscript
Re: Convert SapScript to Smartforms ?
regards.
Kiran Sure

To convert Smart Form output to PDF format and send it via email.

Hi Friends,
Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
John

Refer the links -
how to convert smartform into pdf and send through mail
Smartform as PDF attachment to a mail.
smartform pdf and mail
smartform to pdf to mail
Regrads,
Amit
Reward all helpful replies.

Error in calling/converting smart form from ECC to pdf in portal.

Hi,
We have a requirement in our project where we have to show IT form in portal exactly in the way payslip are shown in ESS
Screen, that is in the pdf form in ess portal screen.
For this my HR abap consultant has made one customize smart form which is being called from a RFC FM.
After the FM lf_fm_name gets executed , the OTF data is being captured and then converted in to PDF.
After that the PDF is then converted into XSTRING format which is then supplied to the portal side through export parameter
of the RFC.
Now when we debugged the RFC, the conversion is taking place perfectly fine in to XSTRING.This is wat we assume.
Portal Side: I have used Iframe ui ELEMENT in my webdynpro java and its property source I have binded with a value attribute
of type string and I am executing above customize RFC given to me by my HR abap consultant and after executing that RFC with
userID and payroll year as its import parameter I am taking export parameter of that RFC with name pdf_string of type XSTRING
of that RFC into my webdynpro java value attribute which i binded to source property of Iframe.
Now when we see the output in portal , first of all pdf is not getting generated and its showing the error message:
file does not begin with '%pdf-' and secondly errored Adobe form getting opened outside Iframe window its not coming within
Iframe window like what payslip comes inside Iframe UI element.
I want to know what mistake we are doing in our ABAP coding or portal coding.
Please help.

Hi Satyam,
You can use the existing SAP GRT framework for developing the app.
Its easy and provides more features.
See this wiki:
http://wiki.sdn.sap.com/wiki/display/WDJava/HowtodevelopcustomWebDynproESSapplicationsusingGenericReportingTool%28GRT%29
Regards
Yugandhar Reddy

Smart form - convertion of english to japanees language

Similar Messages

Maybe you are looking for