Sound not available. . .

Hi.
Sometimes, in fact, most of the time, when i try to turn up the volume on my mac it comes up with a circle with a line through it as if its not available. I dont hear the pop when you turn it up or down either. I dont have any external audio interfaces or gear connected, im on the latest leopard.
Any ideas?
Cheers, Ben

have anyone of you had the problem after a boot up because this happened to me the first time the other day and I had to restart my computer because it would not come on and it was for some reason also slowing down my computer

Similar Messages

TS3171 Why are most of the sounds not available? eg no steinway or yamaha pianos, virtually no guitars...

LOGIC PRO
Why are most of the sounds not available? eg no steinway or yamaha pianos, virtually no guitars...

Hi
Assuming that you purchased Logic from the Appstore, did you download all the additional content?
Go to the Logic Pro menu and choose "Download Additional Content".... there's loads to download, so it is probably best to do it in batches.
CCT

Why is the sound sometimes not available?

I noticed more lately that after starting my mac, there is no sound, not volume slider in the menu and not even a sound device available. After restarting it's back again. Why is this?
André

Try setting the PRAM. Restart the computer. After you hear the chime sound (if you hear it, if you don't wait until the screen just turn silver), press and hold optioncommand+RP to reset the PRAM. That should work.

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

Sound Input not available with AJA IO

Hi everyone,
I have a problem with recording sound, using the voice over tool with my AJA IO.
Whenever I try to select ProIO In as source for my, it says "The selected audio source is not available. Maybe it's used by another program, not or wrong connected or there's a conflict with the video output device" (that's not the exact original therms, I translated from German).
I'm using the AJA IO to output video/audio to the sound booth via AES/EBU and Composite. I re-installed the AJA drivers and have no problems to record via SDI.
Maybe it's not possible to output audio/video and simultaneously record audio with the AJA IO?
Thanks in advance for your help!
Best regards,
Martin

Too bad, I really hoped and expected, that this is possible. Unfortunately when I try to use my second sound interface (M-Audio FastTrack Pro), the whole system crashes. So I have to use the built-in line in, what is a shame.
Anyway: Thanks for the info, Jerry!

Satellite A300 - Series Stereo Mix not available with Conexant sound driver

Hi . . .
I have Toshiba Satellite A300 PSAJ0E notebook . . .
I was useing Windows XP Professional . . .
But I am not able to use Stereo Mix the peculiarity . . .
I installed Conexant HD SmartAudio 221 Driver . . .
What can I do in this subject . . .
I thank right now . . .
Best Regards . . .

Unfortunately, but you cannot do much
The point is that this is a Conexant sound driver issue. This options or setting is simply not available in Conexant sound driver and therefore the Stereo Mix port is not available and cannot be used.
I think only an sound driver update can helps so lets wait for a update.
Cheers mate

The sound is not available

I was using Oxford online dictionary ( http://www.oxfordlearnersdictionaries.com/us/definition/english/happy ). When I clicked the prunuciation button, a message popped up saying "Apologies, the sound is not available."
Here is a screenshot.
https://i.imgur.com/UGSlqkm.png
I have tested this on another broswer (chromium) and did not have this problem.
How do I get it to play?

Doesn't work for me either on Linux with Firefox 32.
It works in Firefox 31
The Web Console (Firefox/Tools > Web Developer) shows this error.
<blockquote>
Invalid URI. Load of media resource failed. happy
</blockquote>
The MP3 seem to be crashing Firefox as I can't close and restart Firefox and need to kill the process.

Verizon Online Chat sez the new 500 GB DVR is not available in Plano, TX, does this sound right?

I just got off chat with Verizon about ordering FiOS TV and 3 x DVRs. They told me the high capacity DVR is still not available in my area (Plano, TX). Is anyone in my area using the new hi-capacity DVR ???
Thanks!

It is available in Plano because we got ours. After receiving the email that we could upgrade we went into the store and exchanged ours out.

My external hard drive is not recognized by Time Machine; "The backup disk is not available" according to Disk Utility

I'm not completely tech savvy, but I'm having troubles with my external memory & time machine. I'm a student, and thus its very important to me to be able to back up my computer.
I wanted to back up my Time Machine the other day. I clicked the icon at the top of the page (beside the battery icon, etc.) and the message "The backup disk is not available". I have a 500GB Seagate passport (ie: http://www.bestbuy.com/site/Seagate---FreeAgent-GoFlex-500GB-External-USB-2.0-Po rtable-Hard-Drive---Silver/9929098.p?id=1218196478444&skuId=9929098)
My macbook pro is version 10.7.5 Mac OS X Lion. My external memory is only about a year old. It hasn't been dropped or anything; it permanently sits secured to my desk.
What appears when I click "Repair Disk":
Verify and Repair volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect block count for file shutdown_time
(It should be 1 instead of 0)
Invalid node structure
Rebuilding catalog B-tree.
The volume Time Machine Backups could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
After clicking "Repair Disk" this message pops up: "Disk Utility Stopped Repairing 'Time Machine Backups' Disk utility can't repair this disk. Back up as many as your files as possible, reformat the disk, and restore your backed-up files."
I don't want to wipe my memory on my external disk just in case the disk doesn't restore (as I do not have another disk to back up my computer on to).
What is going on? Why is this happening out of the blue? How can I fix this?

Sounds like it either has, or is about to die.
If you don't need anything off the old drive, then yes, replace it immediately with something a little more reolaable. I use WD Caviar Black personally. But anything that has a known low failure rate.

Problems installing iTunes 10.2.1 -installation source is not available

I've tried to download the upgrade to 10.2.1 a number of times with no success. I keep getting the error message:
Windows Installer
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes.msi" in the box below.
But when I search for the installation package I can't find it on my computer anywhere.
I've tried uninstalling iTunes but it won't let me do that for the same reason. It says: The installation source for this product is not available. Verify that the source exists and that you can access it.
Can anyone help me please?

The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes.msi" in the box below.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

Encore CS5: The software that's used to decode the media is not available on this system...

Hi guys, I am needing assistance with this matter. I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something. Can anyboy please assist me?
Here's the background:
OS: Windows 7 64-bit.
Video footage format: AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4).
Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore. The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link. (This is the way I have been operating countless times in CS4. However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again.
So I tried the other way around. I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice. This time around, i don't get a crash out of Encore, instead I get the following message:
"The software that's used to decode the media is not available on this system.
Installing the correct decoders for the files you are working with may help to correct the problem."
So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009). I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up. Can anybody help?
Many Thanks,
Matt

I am having the same problem however I end up having hardware error "Sense code 52102"
My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
I have wasted over 20 DVD's trying different things.
OS: Windows 7 64-bit.
Video footage format: HD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

Why are some fonts not available?

I have found that there are fonts in HD>Library>Fonts that are not showing up in any Collection in Font Book and are not available in apps that I'm working with. Font Book Help does not address this problem.
Some help with this, please?
Peter

What types of fonts are they? If they're Type 1 PostScript, this may be the problem.
Font Book can read PostScript fonts. But from the sounds of it, you don't have the whole font. Type 1 PostScript fonts are a set. One file is a suitcase containing all of the low res bitmap screen fonts. The rest are the outline printer fonts. As an example, here's Adobe Garamond.
Adobe Garamond
AGarBol
AGarBolIta
AGarIta
AGarReg
AGarSem
AGarSemIta
The first file which I highlighted in green is the font suitcase of bitmap screen fonts. The rest are the outline printer fonts.
1) The files for a Type 1 PostScript font must have both the screen and printer fonts for a given set in order to work. They also must be in the same folder.
2) The suitcase of bitmap fonts will work alone, but output will be terrible since the system will print the fonts using the 72 dpi screen fonts in the suitcase if the outline portions are missing.
3) Having only the outline fonts will not work. You will get exactly what you are having problems with. You can see the fonts, but Font Book won't load them. That's not a problem with Font Book itself. No font manager will load outline fonts without the matching suitcase of screen fonts present.

"Distribution ...not available to distribute" error in log

I have set a distribution and channel but i am getting these messages in
the TED dist log. Please note % represent a sensitive variable
2006.08.24 14:30:43 [TED:Event Processing] Gather
AOTfiles.Distributions.ZfS.ZENworks.WCP stopped with error:
PROGRAMS:\zenworks\pds\ted\dist\%Treename%~aotfile s.distributions.zfs.zenworks.%O%\1156384594035_TEM P\sp2.spk
2006.08.24 15:51:44 [TED:Event Processing] Distribution
AOTfiles.Distributions.ZfS.ZENworks.%O% not available to distribute.
I do not understand I set up a test distribution and that worked fine, but
when it came to setting up a real one it all went pear-shaped
ZFS 7sp1 netware 6.5sp5 edir 8.7.3.8

[email protected],
>2006.08.24 14:30:43 [TED:Event Processing] Gather
>AOTfiles.Distributions.ZfS.ZENworks.WCP stopped with error:
>PROGRAMS:\zenworks\pds\ted\dist\%Treename%~aotfil es.distributions.zfs.zenworks.%O%\1156384594035_TE MP\sp2.spk
I think we need another level of logging enabled to actually see what went
wrong before this point. It sounds to me as if the APP object references
a path that the server is not able to resolve. Like maybe a drive letter
instead of UNC path.
COuld this be?
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com

Adobe Acrobat 7.0 Pro PC with Windows 7 - error mess "Adobe PDF Printer - not available" Help?

Just loaded my old Acrobat 7.0 Professional on new PC with Windows 7 - Error message "Adobe PDF Priner not available. Therefore do not have option of Adobe printer when using Word.
Any ideas as to what - if anythjing I can do?

Hi,
Technically acrobat 7 not not designed for windows 7 OS. You can try to install the pdf printer manually but it's not guaranteed :
Click the Windows "Start" menu, select "Control Panel," choose "Hardware and Sound," click the "Add a Printer" link under Devices and Printers.
Click "Next" and select "Local Printer Attached to This Computer."
Remove the check from "Automatically Detect and Install My Plug and Play Printer" and click "Next."
Select "My Documents\\*.pdf (Adobe PDF)" in the port selection drop-down menu and click "Next."
Select the "Have Disk" option and click the "Browse" button to open a dialog box.
Select the "AdobePDF.inf" file located in the AdobePDF folder in your Program Files directory under "Adobe" | "Acrobat 9.0" | "Acrobat" | "Xtras."
Select the first item on the list of Adobe PDF Converter options and click "Next."
Type "Adobe PDF" in the field for a printer name and click "Next."
Wait for two minutes for the system to process the drivers and click "Finish" to close the Add a Printer wizard.
Hope this helps.

Sound not available. . .

Similar Messages

Maybe you are looking for