Speech recognition server "not responding"

speech recognition server" "not responding" constantly in Activity Monitor and it is Highlighted in RED
Anybody seen this before?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

Ignore voice commands / Speech Recognition Server timeout

I'm fairly new to AppleScript but I've found it really entertaining and gloriously simple to pick up so far. I've been using it mostly to make my own speakable items for the Mac's voice control, and I've managed to write some basic things like voice commands to set/change volume and brightness. My goal at this point is to be able to do the majority of things I want to do on my computer by voice only. Sue me - I just rewatched Iron Man and I really wish I had a JARVIS system right now.
This means that the computer must always be listening for commands (I have set it to 'listen continuously with keyword', and set the keyword as 'optional before commands'). It defeats the purpose if I have to walk over and hit a key to start listening for commands. At the same time, I don't want to have to speak a keyword, because I will invariably forget to do so and it's also an added hassle (especially when I have several commands to say - I don't want to have to say the keyword before each command).
You might have an idea of where this is going. Obviously, if the computer is always listening, it will pick up on normal conversation and try to interpret it.
I could just deactivate voice commands when I'm not using it, but as I said earlier, I don't want to have to either hit a key or say a keyword. In other words, I want to be able to activate and deactivate voice commands by voice. Deactivating is easy. Activating is what presents an interesting problem, because if it's deactivated, how will it hear my reactivation command?
Thus, the first part of my question: is there a way - any way at all - to get voice commands to ignore commands until given some keyword, short of literally changing its settings to listen for a keyword before the command?
I decided to try to use speech recognition. This must, I think, be involved in some way, because as I said earlier, this presents the unique problem of having voice commands deactivated yet still able to recognise the reactivation command. I had noticed that while the computer is listening for a specific command, it ignores anything that isn't what it is listening for. I tried to use this to my advantage and wrote a script to listen for a reactivation command; until the reactivation command was given, the computer would ignore everything else. The problem is that the speech recognition server times out after two minutes. I have tried to increase this, but to no avail (see below for my attempts).
Thus, the second part of my question: assuming there is no other answer to my first question, is there a way to get speech recognition to listen indefinitely?
Here are the two things I tried to make the timeout last longer, specifically for five minutes (300 seconds) in both cases. Neither worked; both timed out after 120 seconds.
tell application "SpeechRecognitionServer"
set userinput to listen for {"resume voice commands"} giving up after 300
end tell
and
with timeout of 300 seconds
set userinput to listen for {"resume voice commands"}
end timeout

UPDATE: I have since come up with an alternate solution. I created two speakable items, one for 'deactivation' and one for 'activation'. The deactivation command uses UI scripting to set voice commands to 'keyword required' mode (i.e. the keyword is required before each command); the activation command simply sets it back to 'keyword optional' mode.
I figure that as long as I choose a keyword that's unique enough that it (and things that sound like it) won't come up too often in conversation, the computer will ignore anything I say once I activate the keyword requirement. Then, I only need to say the keyword once along with the reactivation command to bring it out of this 'ignore commands' state.
In a way, this is actually better, because it allows me to continue to use voice commands if I really need to, as opposed to having to say the reactivation command to get my computer to listen to me, saying my intended command, and then saying the deactivation command to make it ignore me again.
All the same, if anyone has answers to any of my two original questions, please don't hesitate to share your knowledge! It might come in handy later!

Speech recognition server using all kinds of memory!

I'm running an imac 27" with 8gb of memory and have been doing some video work lately. Watching things with activity monitor I noticed that speech recognition server process was using 800mb + of memory. Normally I keep speech recognition started but activated by voice suppressed with the escape key.
I have already found that -using- speech commands prevents the computer display from going to sleep, like this discussion - https://discussions.apple.com/message/11395271?searchText=speech%20recognition%2 0server#11395271
I reported this as a bug to Apple, and they admitted there is a problem, and that maybe they will fix it but no guarantee.
I created a workaround for the display sleep that seems to alleviate both situations, I "wrote" an applescript to restart speakable items. It's pretty simple but you have to wait for the processes to go away, around 30 seconds or so.
Has anyone else seen or reported the excessive memory use with speech recognition?

That's wishful thinking if you think an update will be made overnight by Apple because of a complaint by an individual.
10.7.3 reportedly only updates:
Add Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian language support
Address issues when using smart cards to log into OS X Resolve issues authenticating with directory services Address compatibility issues with Windows file sharing
10.7.2 reportedly only updates:
iCloud stores your email, calendars, contacts, Safari bookmarks, and Safari Reading List and automatically pushes them to all your devices. Back to My Mac provides remote access to your Mac from another Mac anywhere on the Internet. Find My Mac helps find a missing Mac by locating it on a map and allows you to remotely lock the Mac or wipe all its data. Getting started with iCloud is easy. After installing the update, OS X will automatically present an iCloud setup panel. Simply enter an existing Apple ID or create a new one and then follow the on screen instructions. To learn more about iCloud visit http://www.apple.com/icloud.
The 10.7.2 update also includes Safari 5.1.1 as well as fixes that: Allow reordering of desktop spaces and full screen apps in Mission Control.
Enable dragging files between desktop spaces and full screen apps. Address an issue that causes the menu bar to not appear in full screen apps. Improve the compatibility of Google contact syncing in Address Book.
Address an issue that causes Keynote to become temporarily unresponsive.
Improve VoiceOver compatibility with Launchpad.
Address an issue that causes a delay in accessing the network after waking from sleep.
Enable booting in to Lion Recovery from a locally attached Time Machine backup drive. Resolve an issue that causes screen zoom to stop working. Improve Active Directory integration.
10.7.1:
Address an issue that may cause the system to become unresponsive when playing a video in Safari. Resolve an issue that may cause system audio to stop working when using HDMI or optical audio out. Improve the reliability of Wi-Fi connections. Resolve an issue that prevents transfer of your data, settings, and compatible applications to a new Mac running OS X Lion. Resolve an issue in which an admin user account could be missing after upgrading to OS X Lion.
These are each information from the various update pages.    While Apple has been known to include unreported updates in their version updates, the closest to something desired was the Voiceover improvement in 10.7.2. That though is of speech from putting the cursor over text to read out loud.
If they are running 10.7.3, and have not seen improvement, then my advice from my other post is good.
I would also indicate that one is running 10.7.3 in one's profile so one knows one isn't missing any updates that may not already be applied.

Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

I could help.
When exporting to Encore or Premiere, the program block.
In the Activity Monitor shows me these two errors:
Adobe QT32 Server (Not Responding)
PPro Headless (Not Responding)
Technical Specifications:
MAC OS X 10.9.5
Adobe Suite CS6
graphics card: AJA KONA LHi
Can you help me please
Thank You

Have you checked out this post from Adobe? I know it says for After Effects but it definitely applies to Premiere too. We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro

Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.

Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh

TS4006 Phone deactivated - My iphone 5 has on its' own de-activated itself. It requires my apple id and password to re-activate. Upon this command, I press next, to which it says: server not responding. Rendering my phone useless...please help

Iphone de-activated itself - it won't accept the ID and password as it says: server not responding, rendering the phone useless...please help

i'm in the same situation. waiting for an answer.

Exchange Server not responding - please try later

Hi there
Can anyone please help with my E75.
I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
Until a couple of days ago!!!
Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
My problem is that I don’t know where to start.
Is the problem to do with:-
My phone?
Its settings?
Orange’s servers?
My work’s servers?
Nokia’s servers?
I’m confused – please help.
Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
Thanks in advance
Ian

hi
as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
Yahoo! Search Search:
Welcome, ksatcw[Sign Out, My Account]
Messenger Home -
Help
Go Back to Yahoo! Messenger
Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
Is my Use Proxies Enable HTTP Proxy setting the reason why I cant sign into the Yahoo! Messenger Beta?
Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. Well get this resolved as soon as possible.
Email this page Print this page
Was this article helpful?
Yes
No
Contact Customer Care Click to contact Customer Care for further assistance.
Top Questions
Questions about the closure of Yahoo! Messenger version 5.6?
Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
How do I install Yahoo! Messenger?
How do I configure my firewall/proxy server?
Yahoo! Messenger crashes when I launch it.
but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

Mail server not responding. Need help how to verify my account

Mail server not responding. Need help how to verify my account

There are instructions on this page for how to create a new account without giving credit card details (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
Unless an account is created via those instructions then credit card details will need to be entered on it before the account can be used.

Mail server not responding, have checked details in mail settings, i pkone 4s

Mail server not responding, have checked my details, help

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
 Cheers, Tom

The server not responding

Frequently, the server not responding at the logins of the users. It's not hanging but not responding. All the Oracle services is running and the Event Viewer not record any error or warning. I need to know if there are someone Oracle log where I can check this. Thanks.

That could be a hardware problem with the WiFi antenna. Contact Apple Support for assistance: Contact Us

7410 NFS server not responding

Greetings,
Anyone seeing "NFS server ... not responding" from a client of a 7410?
I have a 7410 with a single J4400 (22 1TB drives @ RAID1, 1 spare, 1 logzilla). It's running 2009.09.01.3.0,1-1.8, which I believe is the latest and greatest. There is one client, a T2000 running Solaris 10. We're using NFS v3 to mount four shares from the 7410. Mount options look like this:
box-nge2:/export/oracle/data - /oradata/data nfs - yes rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,vers=3,noac,forcedirectioA fairly large (~1TB) Oracle database lives here (although there was very little activity in the database when the following occurred).
Today I was cleaning up some old data files from a now unused Oracle instance. Pretty simple: rm -rf /oradata/data/DO-NOT-WANT/ . I was surprised to see the command appear to hang, and the "NFS server kwaltz-nge2 not responding still trying" message appear. Control-C eventually got me my prompt back.
When the system became responsive again a few minutes later I tried deleting files one at a time. Deleting some "large" data files (i.e 200GB or more) was taking more than 2 minutes, and caused the NFS server not responding message. Smaller files would take a few seconds.
Why is a simple "rm" command bringing the 7410 to its knees? Any thoughts? Thanks.
Edited by: roymcmorran on Dec 23, 2009 3:44 PM

After some update issues, we also lost NFS. I created a test share and exported it to one of our Solaris 10 hosts. I got an rpcbind failure. This failure wasn't corrected by restarting the NFS service, nor rebooting the 7410. Rather, I had to DISABLE the NFS service, then re-enable it. After that, all connectivity returned.
Charles

Unable to connect, server not responding

Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.

Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

With 3g, I keep getting "server not responding" on my iPad2...what do I do?

at home, where I do not have WIFI, I have been unsuccessful for the last day to get an internet connection via 3G. Getting emails is not a problem, but when I try to access the internet, all I get is "server not responding".....do I contact ATT or is there something else I can try? This problem appeared out of the blue.

If you have a very slow 3 g signal, or worse, a signal so bad that it falls back to 2 g or edge, many servers will time out before you can get the data. There are some apps that will let you test your connection speed, such as speed test.
If you are in a real congested area, or wayyyy out in the sticks, this may be the problem. A good way to test is to goto a known good signal area, like a starbucks, join their wifi, and see if the pages work. Then leave the wifi, but in a known good 3 g area, see if the it is better.

All crawl jobs are failing with errors, Query server not responding.

Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
Pavan

Hi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

Speech recognition server "not responding"

Similar Messages

Maybe you are looking for