Starting sap getting problem

Oracle can be started but when try to start sap with startsap then it is thorowing error 12
After executing R3trans -x getting the following error
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/YC5/SYS/exe/run/dboras
lib.so' ...
4 ETW000
 94 0.000743
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib: dlopen()= Unable to find li
brary 'libclntsh.so.10.1'. -> DLENOACCESS (0,Error 0)
4 ETW000
1345 0.002088
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/YC5/SY
...skipping...
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 26.09.2007 - 09:34:01
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Sep 26 09:34:01 2007 432 0.000432
4 ETW000 [dev trc ,00000] db_con_init called 40 0.000472
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 177 0.000649
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/YC5/SYS/exe/run/dboraslib.so' ...
4 ETW000 94 0.000743
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib: dlopen()= Unable to find library 'libclntsh.so.10.1'. -> DLENOACCESS (0,Error 0)
4 ETW000 1345 0.002088
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/YC5/SYS/exe/run/dboraslib.so'
4 ETW000 46 0.002134
2EETW169 no connect possible: "invalid values set for DIR_LIBRARY '/usr/sap/YC5/SYS/exe/run' or dbms_type 'ORA'"
sd2n1v5:yc5adm>

Hi there
The DB has to be open and the listener must be running, otherwise SAP or R3trans cannot connect.
For the client library problem, please check if you have the lib here. Path should be something like /oracle/client/10x_64/instantclient_10202/libclntsh.so.10.1
A very common error is the missing link:
ll /oracle/client/10x_64
-rwxrwxr-x 1 sidadm sapsys 33 Mar 27 2006 dbclient.lst
lrwxrwxrwx 1 sidadm sapsys 41 Nov 29 2006 instantclient -> /oracle/client/10x_64/instantclient_10202
dr-xr-xr-x 2 sidadm sapsys 1024 Nov 15 2006 instantclient_10202
Please do also check if the SAP Kernel Lib can resolve to the client lib, here is an example:
sidadm 53> ldd /sapmnt/SID/exe/dboraslib.so
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libclntsh.so.10.1 => /oracle/client/10x_64/instantclient/libclntsh.so.10.1
libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
libc.so.1 => /usr/lib/hpux64/libc.so.1
libxti.so.1 => /usr/lib/hpux64/libxti.so.1
/oracle/client/10x_64/instantclient/libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
If you cannot resolve the problem with this info, just post the outputs of these commands here.
Best regards
Michael

Similar Messages

Starting SAP System Problem

Hi, 
 
I am trying to install the SAP ERP 2004 and I need to log on to the SAP system to change the DDIC password. 
 
The problem is that I cannot log on to the system because the SAP instance is not started successfully. The disp+work.exe process starts OK but after few minutes it stop. 
 
Please, give me a solution how to change the DDIC password. 
 
I am sending below the content of dev_w0 log 
 
Thank you, 
Vasil 
 
 
 
trc file: "dev_w0", trc level: 1, release: "640" 
* 
ACTIVE TRACE LEVEL 1 
ACTIVE TRACE COMPONENTS all, M 
* 
B 
B Wed Jul 29 10:17:34 2009 
B create_con (con_name=R/3) 
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ... 
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded 
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43) 
B New connection 0 created 
M systemid 560 (PC with Windows NT) 
M relno 6400 
M patchlevel 0 
M patchno 43 
M intno 20020600 
M make: multithreaded, Unicode 
M pid 3676 
M 
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3676) [dpxxdisp.c 1160] 
I MtxInit: -2 0 0 
M DpSysAdmExtCreate: ABAP is active 
M DpSysAdmExtCreate: JAVA is not active 
M DpShMCreate: sizeof(wp_adm) 10528 (1316) 
M DpShMCreate: sizeof(tm_adm) 2780232 (13832) 
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) 
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) 
M DpShMCreate: sizeof(comm_adm) 290000 (580) 
M DpShMCreate: sizeof(vmc_adm) 0 (372) 
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) 
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688) 
M DpShMCreate: allocated sys_adm at 060C0040 
M DpShMCreate: allocated wp_adm at 060C1B58 
M DpShMCreate: allocated tm_adm_list at 060C4478 
M DpShMCreate: allocated tm_adm at 060C44A0 
M DpShMCreate: allocated wp_ca_adm at 0636B0E8 
M DpShMCreate: allocated appc_ca_adm at 06370EA8 
M DpShMCreate: allocated comm_adm_list at 06372DE8 
M DpShMCreate: allocated comm_adm at 06372E00 
M DpShMCreate: allocated vmc_adm_list at 063B9AD0 
M DpShMCreate: system runs without vmc_adm 
M DpShMCreate: allocated ca_info at 063B9AF8 
M DpShMCreate: allocated wall_adm at 063B9B00 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
M <EsNT> Memory Reset disabled as NT default 
X ES initialized. 
M 
M Wed Jul 29 10:17:35 2009 
M calling db_connect ... 
C Thank You for using the SLOLEDB-interface 
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' 
C dbmssslib.dll patch info 
C patchlevel 0 
C patchno 43 
C patchcomment View with literal containing (0x60) (786638) 
C np:(local) connection used on UPAYWEB1 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Provider Release:9.00.1399.06 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C 
C Wed Jul 29 10:17:36 2009 
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes 
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process. 
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft 
C pn_id:UPAYWEB1_UFTUFT_UFT 
C Not using MARS (on sql 8.0) 
B Connection 0 opened 
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost 
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090729 101735 UPAYWEB1 
C The IRow interface is supported by this OLEDB provider 
M db_connect o.k. 
I 
I Wed Jul 29 10:17:40 2009 
I MtxInit: 0 0 0 
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000) 
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200) 
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280) 
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610) 
M SHM_PAGING_ADM (addr: 0F850040, size: 525344) 
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040 
M ThCreateNoBuffer index size: 3000 elems 
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
X ES initialized. 
C The IRow interface is supported by this OLEDB provider 
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448) 
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 14304000 
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8) 
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 5047296 
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Reading TBX statistics: 
B dbtbxbuf: 0 object entries precreated 
B Layout of EIBUF buffer shared memory: 
B 0: 1 * 4 = 4 
B 1: 1 * 344 = 344 
B 2: 8 * 20 = 160 
B 3: 4001 * 48 = 192048 
B 4: 2000 * 232 = 464000 
B 5: 4001 * 4 = 16004 
B 6: 1 * 200 = 200 
B 7: 65 * 4 = 260 
B 8: 13755 * 256 = 3521280 
B Tracing = 0, Shm Protection = 0, Force checks = 0 
B dbexpbuf: Buffer EIBUF (addr: 16D000D0, size: 4194304, end: 171000D0) 
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ] 
B Layout of ESM buffer shared memory: 
B 0: 1 * 4 = 4 
B 1: 1 * 344 = 344 
B 2: 8 * 20 = 160 
B 3: 4001 * 48 = 192048 
B 4: 2000 * 232 = 464000 
B 5: 4001 * 4 = 16004 
B 6: 1 * 200 = 200 
B 7: 65 * 4 = 260 
B 8: 13755 * 256 = 3521280 
B Tracing = 0, Shm Protection = 0, Force checks = 0 
B dbexpbuf: Buffer ESM (addr: 171100D0, size: 4194304, end: 175100D0) 
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ] 
B Layout of CUA buffer shared memory: 
B 0: 1 * 4 = 4 
B 1: 1 * 344 = 344 
B 2: 8 * 20 = 160 
B 3: 3001 * 48 = 144048 
B 4: 1500 * 232 = 348000 
B 5: 3001 * 4 = 12004 
B 6: 1 * 200 = 200 
B 7: 193 * 4 = 772 
B 8: 5012 * 512 = 2566144 
B Tracing = 0, Shm Protection = 0, Force checks = 0 
B dbexpbuf: Buffer CUA (addr: 175200D0, size: 3072000, end: 1780E0D0) 
B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ] 
B Layout of OTR buffer shared memory: 
B 0: 1 * 4 = 4 
B 1: 1 * 344 = 344 
B 2: 8 * 20 = 160 
B 3: 4001 * 48 = 192048 
B 4: 2000 * 232 = 464000 
B 5: 4001 * 4 = 16004 
B 6: 1 * 200 = 200 
B 7: 81 * 4 = 324 
B 8: 13754 * 256 = 3521024 
B Tracing = 0, Shm Protection = 0, Force checks = 0 
B dbexpbuf: Buffer OTR (addr: 178100D0, size: 4194304, end: 17C100D0) 
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ] 
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ] 
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]): 
B max_blocking_factor = 50, max_in_blocking_factor = 255, 
B min_blocking_factor = 5, min_in_blocking_factor = 10, 
B prefer_union_all = 1, prefer_union_for_select_all = 0, 
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0, 
B convert AVG = 1, alias table FUPD = 0, 
B escape_as_literal = 0, opt GE LE to BETWEEN = 0, 
B select * =0x00, character encoding = STD / []:X, 
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0, 
B rule_fae->0, concat_fae->0, concat_fae_or->0 
B ***LOG BZY=> unexpected return code 000000064 calling db_cbufl [dbcalbuf#1 @ 4399] [dbcalbuf4399 ] 
B ***LOG BZY=> unexpected return code 17 calling init_shm_a [dbcalbuf#1 @ 1536] [dbcalbuf1536 ] 
B db_calinit failed 
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252] 
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901] 
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359] 
M in_ThErrHandle: 1 
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413] 
M 
M Info for wp 0 
M 
M stat = 4 
M reqtype = 1 
M act_reqtype = -1 
M rq_info = 0 
M tid = -1 
M mode = 255 
M len = -1 
M rq_id = 65535 
M rq_source = 255 
M last_tid = 0 
M last_mode = 0 
M int_checked_resource(RFC) = 0 
M ext_checked_resource(RFC) = 0 
M int_checked_resource(HTTP) = 0 
M ext_checked_resource(HTTP) = 0 
M report = > < 
M action = 0 
M tab_name = > < 
M 
M ***************************************************************************** 
M * 
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0) 
M * ERROR tskh_init: ThIPCInit 
M * 
M * TIME Wed Jul 29 10:17:40 2009 
M * RELEASE 640 
M * COMPONENT Taskhandler 
M * VERSION 1 
M * RC 17 
M * MODULE thxxhead.c 
M * LINE 9589 
M * COUNTER 1 
M * 
M ***************************************************************************** 
M 
M PfStatDisconnect: disconnect statistics 
M Entering TH_CALLHOOKS 
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP 
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730] 
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252] 
M Entering ThSetStatError 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3676) [dpnttool.c 357] 

Hi, 
 
The result from R3trans -d is: 
 
This is R3trans version 6.09 (release 640 - 26.10.04 - 15:45:42). 
unicode enabled version 
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED." 
R3trans finished (0012). 
 
 
The content from trans.log is: 
 
4 ETW000 R3trans version 6.09 (release 640 - 26.10.04 - 15:45:42). 
4 ETW000 unicode enabled version 
4 ETW000 =============================================== 
4 ETW000 
4 ETW000 date&time : 29.07.2009 - 12:45:58 
4 ETW000 control file: <no ctrlfile> 
4 ETW000 R3trans was called as follows: R3trans -d 
4 ETW000 trace at level 2 opened for a given file pointer 
4 ETW000 [dev trc ,00000] Wed Jul 29 12:46:00 2009 3083 0.003083 
4 ETW000 [dev trc ,00000] db_con_init called 24 0.003107 
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 105 0.003212 
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library 
4 ETW000 41 0.003253 
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED." 
 
Thank you, 
Vasil

Problem in starting SAP liveCache server

Hi,
I am getting the following error message when i tried to start SAP liveCache server with LC10.
"Restart of liveCache LC3 on saplc3cache terminated; reason: User LC3RFC has lock"
Message no. LVC072
Does anyone has idea! abt the error? why it comes and how it can be solved?
Thanks,
Venkat

Hi Christiane,
The startup procedure is not even reaching the lcinit script. There are absolutly no logs in knldiag and lcinit.log files. After little bit debugging I found the problem. But don't know how to solve it.
The problem occured when I was doing disrptive testing for the liveCache server.
When I kill ("KILL -9 PID") the liveCache server processes (master first and then child) there are some IPC resources hanging over there. These IPC resources (shared memory segments) holds some locks and are preventing the liveCache server to startup.
The problem is not happening when I kill child first and then master process (all the IPCs are getting removed in this case).
I am wondering whether SAP has any tool to remove these IPC resources for liveCache server uniquely for perticular liveCache server (something similar to cleanipc for SAP systems).
I can't write a script to remove all the IPC resources based on the user name ('sdb') which same for liveCache server and MaxDB. (Imagine a case where MaxDB(APO DB) and liveCache server are running together). Any other solutions?
Any answers/suggestions are most welcome.
Thanks,
Venkat

Problems starting SAP NetWeaver AS Trial Version

Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
 shared lib "dw_xml.dll" version 95 successfully loaded
 shared lib "dw_xtc.dll" version 95 successfully loaded
 shared lib "dw_stl.dll" version 95 successfully loaded
 shared lib "dw_gui.dll" version 95 successfully loaded
 shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....

Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
 1.0.0.127.in-addr.arpa
 Record Name . . . . . : 1.0.0.127.in-addr.arpa.
 Record Type . . . . . : 12
 Time To Live . . . . : 600511
 Data Length . . . . . : 4
 Section . . . . . . . : Answer
 PTR Record . . . . . : localhost
 localhost
 Record Name . . . . . : localhost
 Record Type . . . . . : 1
 Time To Live . . . . : 600511
 Data Length . . . . . : 4
 Section . . . . . . . : Answer
 A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
 Host Name . . . . . . . . . . . . : UKCL515803
 Primary Dns Suffix . . . . . . . : drink.brew.beer
 Node Type . . . . . . . . . . . . : Hybrid
 IP Routing Enabled. . . . . . . . : No
 WINS Proxy Enabled. . . . . . . . : No
 DNS Suffix Search List. . . . . . : sn.brew.beer
 brew.beer
 drink.brew.beer
 scottishcourage.com
 scottish-newcastle.co.uk
 ghodom1.scottish-newcastle.co.uk
 heiway.net
 nl.heiway.net
Ethernet adapter Wireless Network Connection:
 Media State . . . . . . . . . . . : Media disconnected
 Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
 Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
 Connection-specific DNS Suffix . : drink.brew.beer
 Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
 Physical Address. . . . . . . . . : 00-26-55-11-C8-04
 Dhcp Enabled. . . . . . . . . . . : Yes
 Autoconfiguration Enabled . . . . : No
 IP Address. . . . . . . . . . . . : 10.10.210.204
 Subnet Mask . . . . . . . . . . . : 255.255.254.0
 Default Gateway . . . . . . . . . : 10.10.210.1
 DHCP Server . . . . . . . . . . . : 10.10.160.167
 DNS Servers . . . . . . . . . . . : 10.10.160.38
 10.10.236.10
 Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
 Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
 Connection-specific DNS Suffix . :
 Description . . . . . . . . . . . : Microsoft Loopback Adapter
 Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
 Dhcp Enabled. . . . . . . . . . . : No
 IP Address. . . . . . . . . . . . : 10.10.0.10
 Subnet Mask . . . . . . . . . . . : 255.255.255.0
 Default Gateway . . . . . . . . . :
Regards
Tushar Kansara

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

Getting Started with FCE - Problems with my imported files

Hi,
I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
When I export my files to FCE, I instantly get problems.
1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
Please can you offer any advice on how I can get started with FCE more successfully.
Thanks!

Hi(Bonjour)!
(please specify iMovie and FCE version)
Well, your sequence settings in FCE should be DV-PAL 48 Khz.
Create a new sequence.
From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
Import your files and everything should be OK.
Michel Boissonneault
The audio should be AIFF 48 kHz 16 bit linear PCM

Problem in starting SAP

Dear All,
I have a problem during the startup of my Quality server, the Oracle (10.2g) database is mounting, but while I start the SAP it is giving me this error.
hgquasrv:hqsadm 1> startsap
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
awk: 0602-533 Cannot find or open file /usr/sap/HQS/SYS/profile/HQS_DVEBMGS07_hg
quasrv.
The source line number is 1.
Checking HQS Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
open logfile '/usr/sap/tmp/dev_coll.tmp' failed... use stderri
12:24:12 14.08.2008 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
12:24:12 14.08.2008 ERROR: Make sure directory /usr/sap/tmp exists or specify D
IR_PERF
12:24:12 14.08.2008 ERROR: in profile and run saposcol pf=<profile>
saposcol already running
Running /usr/sap/HQS/SYS/exe/run/startdb
Trying to start HQS database ...
Log file: /home/hqsadm/startdb.log
HQS database started
/usr/sap/HQS/SYS/exe/run/startdb completed successfully
Starting SAP Instance DVEBMGS07
Startup-Log is written to /home/hqsadm/startsap_DVEBMGS07.log
Instance Service on host hgquasrv started
Startup of Instance failed
See /home/hqsadm/startsap_DVEBMGS07.log for details
hgquasrv:hqsadm 2>
Can any body help me in this regards.
Thanks in advance.
Udaya

Hi,
These files I can see in the directory :
ls -l
total 40
-rwxrwxrwx 1 hqsadm sapsys 2182 Jun 26 2007 DEFAULT.BAK
-rwxrwxrwx 1 hqsadm sapsys 2300 Jun 26 2007 DEFAULT.PFL
-rw-rw---- 1 hqsadm sapsys 6894 Aug 06 18:03 HQS_DVEBMGS07_hgquasrv.BAK
-rwxrwxrwx 1 hqsadm sapsys 3829 May 21 2007 START_DVEBMGS07_hgquasrv
drwxrwxrwx 2 hqsadm sapsys 256 May 20 2007 oracle
Best Regards
Udaya
Edited by: Uday Bhaskar on Aug 14, 2008 9:47 AM

Problem in starting SAP and DB2

Hi ,
I am facing problem in starting SAP,
I have installed the NW7.0 with DB2 trial version on SUSE LINUX Enterprise Server 10 SP2.
When I try start the SAP , It gives me the error
Why do I receive the error, "SQL6048N A communication error occurred during START or STOP DATABASE MANAGER processing." ?
Please can any one help me.
Thanks,
Sridhar

Dear Sridhar,
A TCP/IP communication error occurred while the START or STOP DATABASE MANAGER command was trying to establish connection with all the nodes defined in the sqllib/db2nodes.cfg configuration file.
possible solutions to fix SQL6048N:
Ensure that the node has the proper authorization defined in the .rhosts or the host.equiv files.
Ensure that the application is not using more than (500 + (1995 - 2 * total_number_of_nodes)) file descriptors at the same time.
Ensure all the Enterprise Server Edition environment variables are defined in the profile file.
Ensure the profile file is written in the Korn Shell script format.
Ensure that all the host names defined in the db2nodes.cfg file in the sqllib directory are defined on the network and are running.
For my case, itu2019s as simple as updating the hostname information defined in sqllib/db2nodes.cfg configuration file!
The db2start command rocks again after updating the hostname information!
If youu2019ve the same DB2 SQL6048N error code when starting DB2 Instance processes with db2start command, confirm the hostname in sqllib/db2nodes.cfg is correct, especially after changing Linux networking information, such as the server hostname!
Definetely it will work when you update the host information in sqllib/db2nodes.cfg.
Please let me know if you have still issues.
Thanks
Kishore

Rss it it's does nothing can anyone tell me how to fix this problem it's really starting to get annoying

problem it's really starting to get annoying

Your iTunes account sounds like it does not have a credit card or payment attached to it. Even free apps require that you have entered payment information even though you won't be charged for the app.

Problems to start SAP instance after reboot

Hello experts,
we are occuring a problem that we are not able to start our SAP instance after we applied some MS patches and rebooted the server. We also deinstalled these patches buzt this also did not help, so I guess the reason somewhere else.
We are running a SQL server 2000 on a Windows 2003 SP2 (32bit)
SAP kernel is 640 PL 304
The SQL server seems to operate normally, however when we try to start SAP via MMC the process disp+work fails (it's green for a few seconds, but then turn so grey).
In dev_w0 I can find this entry
C Mon Feb 22 12:35:18 2010
C OpenOledbConnection: line 23082. hr: 0x8000ffff [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 17, sev 10), [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 0, sev 10), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
I hope you have an idea to solve the issue soon.
Thanks a lot
Philipp

Hi,
yes I read this SAP note however when I try to install this patch
It fails with message "installation unsuccessful"
Reason ??
Check the following:
1. Status of SQLServer Service(s)?
2. Windows Event Log Entries?
What is the SP level of SQL Server 2000 ?
Also, Perform the Connectivity Test as per[ this link|http://support.microsoft.com/kb/827422/].
Regards,
Bhavik G. Shroff

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an e

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an error message about verifying my subscription when I click and get my subscription verified it ays "OK" and I clock to to application and then it jumps back to verification needed - and so it goes on and on and on and..

Here are two other examples of this happening..
I expected more from Apple.
https://discussions.apple.com/thread/6919109
https://discussions.apple.com/thread/6683814

Hi! I just joined the creative cloud. As a photographer I would like to download photoshop and lightroom. When I try to do this, before the download starts, I get the message: 'we are experiencing some problems, please try later'. I've tried multiple time

Hi! I just joined the creative cloud. As a photographer I would like to download photoshop and lightroom. When I try to do this, before the download starts, I get the message: 'we are experiencing some problems, please try later'. I've tried multiple times for the last 3 days but no change... Any ideas?

Michelmolder please try utilizing a different web browser. If you continue to experience difficulties then I would recommend reviewing Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install Photoshop and Lightroom directly through the Creative Cloud Desktop application.

I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop

I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
What is happening exactly?

It sounds like your sleep timers are set to too low of a value. Go to System Preferences -> Energy Saver and set both timers to longer times. The computer sleep timer should be a longer time than the display sleep timer.

Problem Starting SAP with Oracle

Dear Experts,
Our production system rebooted due to some electricity issue and since then we are not able to start SAP. We are on oracle 10g and AIX OS. We have done all the options but no avail.
Following is screen output when I run command : "startsap".
startsap
Checking ABC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123*
Usage: saposcol -l: Start OS Collector*
 saposcol -k: Stop OS Collector*
 saposcol -d: OS Collector Dialog Mode*
 saposcol -s: OS Collector Status*
The OS Collector (PID 884754) is already running .....*
saposcol already running
Running /usr/sap/ABC/SYS/exe/run/startdb
Trying to start ABC database ...
Log file: /home/ABCadm/startdb.log
No SQLNet V2 connect to ABC available.*
Check that the listener is running: "lsnrctl status".
Start the listener as user oraABC: "lsnrctl start".
/usr/sap/ABC/SYS/exe/run/startdb: Terminating with error code 14
DB startup failed
prodserver:ABCadm 2>
Any help & advice to solve this issue will be appreciated.

Hi Mark
As I am Novice user, however I have check /oracle/SID/ directory for .sapenv., .dbenv. files but I didn't find any file.
Then I have executed "env" command as a "root", Output is written below.
env
_=/usr/bin/env
MABCATH=/usr/dt/man:/usr/share/man
SESSIONTYPE=dt
DTDATABASESEARCHPATH=//.dt/types,/etc/dt/appconfig/types/%L,/etc/dt/appconfig/types/C,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
LANG=en_US
LOGIN=root
G_BROKEN_FILENAMES=1
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/dt/bin:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
DTUSERSESSION=root-192.168.0.180-0
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
SESSION_SVR=atpserver
LC__FASTMSG=true
WINDOWID=23068728
IC_DOCUMENT_SERVER_TYPE=STANDALONE
EDITOR=/usr/dt/bin/dtpad
LOGNAME=root
MAIL=/var/spool/mail/root
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame
StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor
StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
IC_DOCUMENT_SERVER_MACHINE_NAME=standalone
LOCPATH=/usr/lib/nls/loc
TERMINAL_EMULATOR=dtterm
USER=root
AUTHSTATE=compat
SAPINST_JRE_HOME=/usr/java14_64/jre
XFORCE_INTERNET=True
DEFAULT_BROWSER=Mozilla
DISPLAY=192.168.0.180:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14_64
DTAPPSEARCHPATH=//.dt/appmanager:/etc/dt/appconfig/appmanager/%L:/etc/dt/appconfig/appmanager/C:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
HOME=/
IC_DOCUMENT_SERVER_PORT=64111
IC_DOCUMENT_DIRECTORY=/opt/IBM/aix
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
TERM=dtterm
PWD=/
TZ=INDST+5:30
XMBINDDIR=/usr/dt/lib/bindings
DTHELPSEARCHPATH=//.dt/help/root-192.168.0.180-0/%H://.dt/help/root-192.168.0.18-0/%H.sdl://.dt/help/root-192.168.0.18-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/etc/dt/appconfig/help/%L/%H:/etc/dt/appconfig/help/%L/%H.sdl:/etc/dt/appconfig/help/%L/%H.hv:/etc/dt/appconfig/help/C/%H:/etc/dt/appconfig/help/C/%H.sdl:/etc/dt/appconfig/help/C/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/dt/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%l/%t/%c/%N.cat:/usr/dt/lib/nls/msg/%l/%c/%N.cat
If you need I will send you output of "env" command as a "ora<SID>" & <SID>adm
Thanks for all your support

Problem while starting SAP servers

Hi,
We had a SAP Nw2004 SPS9 installation on a AIX box.
WE ahd downlaoded the SPS20 to upgarde the server.
During the upgrade process the m/c got hang.
As a result i retsrated the m/c.
Now while starting the sap server using "startsap all"
It is waiting at the followign stage
Checking ADA db Database
I coudl see the following lines in the startsap_SCS01.log file
:$
(290996) Starting: local ms.sapCTS_SCS01 pf=/usr/sap/CTS/SYS/profile/CTS_SCS01_ctsaix05
(327904) Starting: local en.sapCTS_SCS01 pf=/usr/sap/CTS/SYS/profile/CTS_SCS01_ctsaix05
(184394) Waiting for Child Processes to terminate.
Instance on host ctsaix05 started
Starting SAP-Collector Daemon
saposcol already running
Running /usr/sap/CTS/SYS/exe/run/startdb
/usr/sap/CTS/SYS/exe/run/startdb completed successfully
Checking ADA db Database
~
It just hangs there
Best Regards
Manoj

Hi Manoj,
Seems like the DB is not running... check the status of the database and try it again when the DB is online...
Also, check dev_w0 for errors...
Regards
Juan
Please reward with points if helpful

Starting sap getting problem

Similar Messages

Maybe you are looking for