STARTSAP_NBAS DDIC password locking out

Guys,
We are doing 4.6c upgrade to ERP6 and during STARTSAP_NBAS phase DDIC locking out and cant start SAP original system. We tried to unlock the password and also did the reset using SAPup reset DDICpwd. But its still locking out.
When we tried to login to the system using GUI through DDIC we can login but when we try reset the password in SU01 we are getting syntax error " The data object "*USH02" does not have a component called "PASSCODE"."
Please help
Reward points will be awarded for helpful answers
Thanks
Santosh

Hi Santosh,
The problem is clear that the table USH02 is not updated during upgrade
so that it is not synchronized with table USR02. Please check table
USH02 and USR02 table in database level, compare the PASSCODE field in
both tables. (most probably there is no PASSCODE field for USH02 in db
level as well). If so, you could do the following:
1. Change the DDIC password to 19920706 at the table level:
    update sapr3.usr02 set bcode='61D26428640DBAB5'
                          where bname='DDIC' and mandt='000';
2. Remove the lockflag
     update sapr3.usr02 set uflag=0;
3. Change the DDIC password to 19920706 for the upgrade using:
SAPUp set ddicpwd
4. Then restart the system, and login again.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Similar Messages

STARTSAP_NBAS Phase DDIC password locked

Guys,
We are doing 4.6c upgrade to ERP6 and during STARTSAP_NBAS phase DDIC locking out and cant start SAP original system. We tried to unlock the password and also did the reset using SAPup reset DDICpwd. But its still locking out.
When we tried to login to the system using GUI through DDIC we can login but when we try reset the password in SU01 we are getting syntax error " The data object "*USH02" does not have a component called "PASSCODE"."
Please help
Reward points will be awarded for helpful answers
Thanks
Santosh

Santosh,
1.First upgrade the Kernal to the latest available Version,then proceed with the upgradation.The version should be atleast 55.
2. Have a look at this SAP Notes: 955615.
3.Note 822379 - Known problems with Support Packages in SAP NW 2004s AS ABAP
4. Check whether you are using the correct Kernal (Unicode/Non-unicode).
5.What is the valus that you have given for the parameter:
login/password_downwards_compatibility"
This is a dynamic profile parameter; you can change it's value (using transaction RZ11) without restarting the system.
SAP recommendation
SAP recommends that you always import the latest version of the SPAM/SAINT update before you import any Support Packages.
You download the latest versions of the tp and R3trans executables from SAP Service Marketplace (see Note 19466).
Regards,
Karthick Eswaran

Password lock out

Hi,
I am locked out of my blackberry. I used it earlier this morining and then went back to use it again and my password would not let me in. I am up to my 9th try and it says it will wipe my phone if I enter in one more wrong password. It would be devastating if my phone was wiped as I have not been able to back it up due to a computer crash that took several weeks to fix. How do I bypass the password without wiping my phone? I have the blackberry software on my computer, but its asking me for the password as well. My phone is a blackberry curve 8330.
Thanks,
Lee F.
Littleton Colorado
Message Edited by Jonathan_K on 08-20-2009 03:09 PM

Once you are on the 9th attempt that's it no more turning back you will have to remember your password else your device will be wiped.
My Blackberry keeps blue screening on me.

Entered 9 digit WEP password, locked out of network/router.

Hello,
I was setting a WEP key on a WRT54G router and forgot to put the 10th digit. I put 123456789 real fast and forgot to think, hit submit then I got locked out...I figured the router would not accept a 9 digit key but aparently it does. Trying to connect to the router via that key does not work either, Windows will not accept it as a password. Does the WEP key default to something? or does it place a letter/number before/after if 10 digits was not present? Any help is greatly appriciated. Thanks

Stop trying to connect to 192.168.1.1 wirelessly! You should not try to access the router setup pages wirelessly, this often fails. Instead, wire your computer to the WRT54G, and then login to your router's setup pages at 192.168.1.1 and make whatever changes you need to make.
For WEP, enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
Message Edited by toomanydonuts on 10-12-2009 07:34 AM

DDIC is locking out

Hi, I need some help on user DDIC in Client 000. It keeps on locking itself out. Has anyone got any ideas on what could be causing this to happen?
Thanks

Sure. You don't make mention of what releases you run. In WAS640 and WAS700, you can have dual stack systems - BI, ECC, PI/XI, etc, where each instance of your SAP system is made of 2 components - an ABAP stack and a J2EE stack.
Typically, you point the J2EE stack to the ABAP stack for items like user ID/password storage. Regardless of function, you'll end up having JCos (J2RR RFC'c) going back to the ABAP stack. A lot of folks set these up as DDIC and can be easily 'forgotten' when troubleshooting.
If you have J2EE stacks in the system - attached to this box or freestanding like a portal - please make sure you check the JCos in these systems as a potential source of the issue.
Cheers,
Tim

SAP NW Solution Manager 4.0 Administrator/J2EE_ADMIN password locked out

Guys,
I was successfully able to install SPA Solution Manager v4.0(ECC 6.0) JAVA+ABAP Stack.
Post Installation, I am tried to logon to the SolMan (User Management & SAP Netweaver Adminsitrator) through HTTP (IE) URL http://<localhost>:port
The homepage displays just fine. When try to authenticate to User Management & SAP Netweaver Adminsitrator using following commbinatioln, the authentication fails.
user = J2EE_ADMIN password = <ADMIN>
OR
user = user = J2EE_ADMIN password = <admin> (Not sure if the password is case sensitive)
Now, I looked at the alerts and found that J2EE_ADMIN user is locked.
Does anyone of you know how to unlock this id and what its password should be ?
Any alternative user id/password can be used to login ?
Should I have to install SAP GUI for Java or ABAP ?
Please help me login to solution manager.
Thanks for your help!!
Chris.

Hello,
as far as I know you can login with a sapgui to your installed system. If you did an standard installation, then the J2EE stack is bound the client 001. Therefore logon as DDIC or SAP* to the ABAP part with SAPGui and unlook the J2EE_ADMIN user.
You had tp specify the passwort of all users during the installation process of SOLMAN 4.0. If you did an standard installation, you only specified one password for all kind of users.
HTH
Frank

HP 15-r030wm Notebook PC Bios Password locked out

Could you guys please help me with system disable code. Need password to get into bios. Thank you. I get System Disabled 85434395 on the screen after my third unsuccessful attempt to access the bios.

Hi,
Sorry, my typos, please try:
30592911 (zero, not nine)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPod touch disabled, password lock out, not appearing in iTunes devices

Hi,
My daughter has entered the wrong passcode on her new iPod touch multiple times and now there is an error message on the screen saying iPod is Disabled - connect to iTunes. When I connected it to iTunes, the following error message appeared : 'iTunes could not connect to the iPod touch because it is locked with a passcode. You must enter your passcode on the iPod before it can be used with iTunes'. This is not possible because the iPod is disabled. The iPod does not appear in as a device in iTunes, nor is it visible as a folder on 'my computer'. iPod has never been synched with any computer and it does not synch when connected to my PC. I have tried re-setting the iPod by holding down both the on/off and home buttons but to no avail. All of help I came across directed me to the device in iTunes but it is not possible to do this. Can anybody help?
Thanks in advance.

Place the iPod in recovery mode and restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Password lock out I have Vista

My computer won't take my password and I don't have a recovery disk.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Unit.
We will surely assist you with this.
Originally the Unit will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Unit
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Unit at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Unit at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Forgotten iPod Touch - Restriction Password lock out

My son has set his iPod restriction password differently to his main access password. However he can't remember what he set it to. Should he delete and reset everthing on his iPod?
Will this allow him to set new passwords to access his restrictions as well?
Regards,

Two choices. If you added the Restrictions passcode after the lates sync (it includes a backup the restore from that backup. Otherwise you will have to restore to factory defaults/new iPod. If the Restrictions passcode in in the backup it willbe restore with a restore from backup.

HT4623 iphone 4s password lock

password lock out , my son locked my iphone 4 s

Read here about how to remove it:
http://support.apple.com/kb/HT1212

ICloud/iTunes Account Locking out Active Directory Account [?]

The facts:
I have been having this problem for the past four+ months.
My work email address is my iTunes account name
My work AD account gets logged out most evenings, sometimes within an hour of leaving work, sometimes late at night
I know when my account is logged out because my iPhone will ask for my Exchange password, or I cannot get into Outlook Web Access
When my iTunes/iCloud account password is the same as my Active Directory password this does not happen. When this was the case earlier this year I went 90 days without a lockout. The day after my password expired and I changed my password - locked out again
Exchange recognizes two mobile devices, my iPad2 and my iPhone 4, as mobile ActiveSync clients
I have reset both of these devices, updated to the latest iOS and reinstalled and reconfigured my apps
This occurs even when neither of these devices has an active ActiveSync account set up to use my work Exchange server
The keyrings (Mac) and Credential Managers (PC) of all my home machines have been sanitized
Mail (Mac) and Outlook are not configured on my home machines, and they are not affiliated with the work domain in any way
From these facts it seems to me that the issue is:
There exists a machine attempting to reach my Exchange account using a password I have used in the past
If it is a computer that I have possession of, it must be an iDevice, because this behavior has still occurred when all others have been powered off
If it is an iDevice under my control then it is something in iCloud/iTunes, because it does not depend on having the Exchange account configured on either iDevice and those are the only applications with knowledge of my work email address
So,
If it is my iCloud/iTunes account then WHY in the name of all that is sacred is it hitting my work Exchange server and locking out my account?
I can think of no other -possible- devices or online services that have both that password, and knowledge of that email address. I remotely wiped an old phone that might have had the email account configured.
Help?

I would very much like to hear from someone at Apple regarding this as I'm having a very similar if not the exact same issue.

AD account getting locked out after password change in Jabber

When user changes his network credentials and does not update them in Jabber. Jabber will still try to connect to phone services and voicemail with the old credentials which is leading to their account getting locked in AD after three attempts.
We are using Jabber 9.6.1, so a fairly new version.
Can some suggest if there is a workaround?

Hi,
We are seeing a similar issue after the user has changed their AD password the account repeatedly gets locked out when they try to log into Jabber.
We are also using Cisco IM&P and our CUCM is LDAP synced
I am interested to know why you are asking if LDAP authentication is configured?
Regards,
Andries

Unity Connection - Users with system default password getting locked out

Hi all, hope everyone is well !!
I am experiencing a strange problem and hope someone can give me some direction on where to start digging on this issue.
I am getting a good number of users reporting they are getting locked out of their voice mail and they all claim that they have not changed their password and some user even got their greeting recorded by someone else. One thing in common for the users who reported the issue is that they all using the system default password. I am trying to trace to find out who/what has access to these users' mailbox but so far I have not had any luck.
Thanks in advance !!
Danny

Thanks, yes am doing that now and cant really find any new/unique pattern. Plus the trace is pretty hard to follow. Cant really figure out any times stamps in the trace also. The current trace file is defaultTrace.18.trc and it has very simiiar content as some of the older ones before the problem. Right now the ESS portal is working and the slddsuser password is not locked. It seems the problem takes place on start up?
/usr/sap/ESS/JC77/j2ee/cluster/server0/log
Tough thing to test in production.
I wonder what takes place at startup that would kick this problem off?
brad

I can't remember my admin password for one of my iMacs. I'm locked out! What are my options?

I can't remember my admin password for one of my iMacs. I'm locked out! What are my options?

Resetting an account password

STARTSAP_NBAS DDIC password locking out

Similar Messages

Maybe you are looking for