[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Revision: 1594
Author: [email protected]
Date: 2008-05-07 11:10:27 -0700 (Wed, 07 May 2008)
Log Message:
Update the warning message when outbound throttle policy of REPLACE is used one more time. Now the warning says this. . .
Throttle outbound policy 'REPLACE' found on message destination 'MESSAGE_DESTINATION'. The 'REPLACE' throttle outbound policy has been deprecated. Please remove it from your configuration file.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageDestination.java

hamish72 wrote:
You can still download as much as you can only a lot slower during peak times off peak will not be restricted.
Thanks for this explanation. I had taken it that it was at all times.
As I said in the first place it will be great if they throttle me to 1Mb at peak times as it will be better half the time than I am getting anyway!!!!!!!!!
hamish72 wrote:
Have you chased up why your line is so bad, long way from exchange and so on
Posting your router stats may get advice from someone
enter for homehub for other routers will differ
192.168.1.254 in browser click A to Z top right
then ADSL enter pas and click MORE DETAIL
POST RESULTS
Also post results of test at ( best done from master test socket)
http://speedtester.bt.com/
Connection Information
Line state
Connected
Connection time
6 days, 11:57:55
Downstream
5,760 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.7 dB / 21.0 dB
Line attenuation (Down/Up)
44.6 dB / 24.0 dB
Output power (Down/Up)
8.9 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25279 / 134
CRC Errors (Down/Up)
700 / 196
HEC Errors (Down/Up)
5427 / 142
Error Seconds (Local/Remote)
477 / 102

Similar Messages

How to turn off the warning message when re-compiling jsp in embedded OC4J?

Members,
I would like to remove the annoying warning messages whenever we re-compile a jsp file using embedded OC4J.
Steps:
1. create an web project
2. create a test jsp file (say, test.jsp)
3. run the jsp file.
4. on the jsp visual editor, modify the jsp file.
5. go to the browser, reload the page. the following warning messages are displayed:
06/03/03 08:09:13 Warning: directory C:\Projects\TestAgain\UserInterface\public_html\WEB-INF\classes doesn't exist on classpath
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:31: warning #556: variable session assigned to but never used
06/03/03 08:09:14 HttpSession session = pageContext.getSession();
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:32: warning #559: variable __jsp_tag_starteval declared but never used
06/03/03 08:09:14 int __jsp_tag_starteval;
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:33: warning #556: variable application assigned to but never used
06/03/03 08:09:14 ServletContext application = pageContext.getServletContext();
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:35: warning #556: variable page assigned to but never used
06/03/03 08:09:14 _test page = this;
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:36: warning #556: variable config assigned to but never used
06/03/03 08:09:14 ServletConfig config = pageContext.getServletConfig();
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:37: warning #556: variable __ojsp_varRes assigned to but never used
06/03/03 08:09:14 javax.servlet.jsp.el.VariableResolver __ojsp_varRes = (VariableResolver)new OracleVariableResolverImpl(pageContext);
06/03/03 08:09:14
I'm so much glad to see JDeveloper giving out all the details and warnings, but sometimes they spit out too much warning messages that simply annoys and distracts my programming.
There seems to be no parameters for me to shut those up, maybe I should do it manually?
thanks.

Ronald,
I've already tried setting up the j2ee-config.xml file, but
it seems that the warning message does not come from the oc4j, but is generated when jsp file is being compiled, so no matter what you do with the j2ee-config.xml, it would not work to remove the warnings.
I was thinking maybe I could setup the java compiler option found in server.xml, by adding -nowarn option in javac options attribute, but it seems that the file server.xml gets overwritten automatically whenever the oc4j restarts (so, no avail).
So... any other ideas?

Iam getting the following message when i try and burn a dvd using my mac The disc can't be burned, because the device failed to calibrate the laser power level for this media.

The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
Can anyone help
Thanks

Unfortunately your drive has *probably* failed. You can try a cleaning disc, sometimes thst can help. First though try resetting the smc and pram.
To reset the smc on Desktop Macs
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

I get the following message, when trying to check for updates on itunes:- "The iTunes update server could not be contacted. Please check your internet connection or try again later".

I get the following message when I go to "check for updates" on iTunes (I have XP on windows). Error message: "The iTunes update server could not be contacted. Please check your internet connection or try again later".
My firewall (both anti virus firewall and windows firewall, are set up to allow itunes programme to work) - I also have set both internet explorer and chrome to allow
apple website as an exception.
However, I still get the same error message... can anyone help?
Thanks

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

IOS updates - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2. How can I fix this?

IOS error messagge - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2. How can I fix this?

Which way are you trying to update? WiFi or iTunes? In either case, I would try restarting/rebooting all devices and then try again.
IF you are using iTunes, eject your iPad, quit iTunes, reboot your computer and reset your iPad by holding down on the sleep and home buttons until the Apple logo appears on the screen. After the iPad starts up, connect to iTunes and try again. You may also want to disable your firewall and antivirus software when you try to update using iTunes. Sometimes those will interfere with the download.
If you are using WiFi, reset the iPad as described above and try again.
If WiFi updating will not work, try using iTunes, if iTunes will not work, try using WiFi.

I keep getting the following message when trying to update my iPhone: An error occurred while backing up this iPhone (-402636798).

I keep getting the following message when trying to update my iPhone: An error occurred while backing up this iPhone (-402636798) Help

You can not create an iCloud account on a PC, you may create one on an iPad, iPhone or a Mac

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

Adobe Acrobat 8.0
standalone version
Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use.

I'm having the same registry issues with my CDROM, getting the warning when iTunes starts up. I've followed the article on how to add the upperFIlter to the registry and it solves the warning message but the DVD/CD writer disappears completely.

I'm having thet same registry issues with my CD-/DVD as is talked about in one of the fix articles I've found here. I added the UpperFilter entry to the registry since it was not there and restarted. This fixes the warning message but then there's no CD/DVD device shown at all in windows. I can put it back to normal and vice versa and get the same results, but I can't get this issue fixed. When I get the registry warning on starting iTunes, I can still rip from CDs and my DVD burner works just fine using other programs.
Any more ideas?

This fixes the warning message but then there's no CD/DVD device shown at all in windows.
That symptom suggests the afs.sys issue ... but there's some other things that might cause it too.
We'd better check to see if we can find what's going on.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

[svn:fx-beta1] 7179: Improving the error message when Flex 4 primitives are added as children to Halo containers .

Revision: 7179
Author:   [email protected]
Date:     2009-05-21 08:54:48 -0700 (Thu, 21 May 2009)
Log Message:
Improving the error message when Flex 4 primitives are added as children to Halo containers.
QE: Yes, please add test cases and update any negative test error strings.
Doc: No
Checkintests: Pass
Cyclone Tests: Mxmlcunit, Mxunit - full, Mxunit - compc, Mxunit - rsl, and Compiler API all pass.
Reviewers: Paul, Glenn
Bugs:
SDK-21300 - Compiler error for using Graphic tags (like SimpleText) in a Halo container is wrong and misleading
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21300
Modified Paths:
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBu ilder.java
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBui lder.java
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.j ava
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler_en.properties

HT4623 I get a the following message when trying to update to 6.1.3 "Unable to intall update, an error ocurred installing iOS 6.1.3" how do I overcome this?

I get the following message when trying to update my Iphone 4 from 5.1.1 to 6.1.3 "Unable to install update, An error occurred installing iOS 6.1.3". Nothing I do changes this, how do I over come this barrier?

Are you trying to update over the air or via itunes?

[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Similar Messages

Maybe you are looking for