Table for List of Active  Data Sources

Hello All,
I have a requirement like, to collect List of Active Data Sources from which extractions are happening for the past one year.
Actually i have many Data sources which are in Active State but extractions are happening only on some of the Active Data Sources.
I can collect List of Active Data Sources from Table RSOLTPSOURCE, but how to collect Active Data Sources from which extractions are happening for the past one year.
Is there any such table which satisfies my requirement?
Thanks in Advance!!

Hi Srikanth,
I had similar kind of requirement in my project and I used following approach,
1) We already had a list of all the process chains which extract data from source system. So you also need to get such list if you don't have then goto RSPCLOGCHAIN and get the list of all the active chains.
2)after that goto table RSPCCHAIN and for all of your chains or for a single chain you can put the TYPE as "loading" and you will get list of all the infopackage.
3) Once you get the list of all the infopackages which are loading data from your source system.
4) goto table RSLDPIO and put all your infopackage name and source system you will get the list of all the datasources in OLTPSOURCE field.
Regards,
Durgesh.

Similar Messages

  • Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

    Hello All,
    I have been  trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
    Below are the steps i have followed,
    1.Deleted the setup tables using tcode-LBWG- Application-11
    2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
    3.Checked the data in RSA3-No data found.
    4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
    Do i need clear all the queues for SD-Billings,Orders e.t.c  since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
    Could you please suggest any other option to fillup the setup tables.
    Regards,
    Siva

    Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
    Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
    Regards,
    AL

  • "There is no active delta initialization for this IS/ QS/Data Source."

    Hi Friends
    I am getting this error message while running the infopackage.
    " There is no active delta initialization for this IS/ QS/Data Source."
    Start Infopackge zpak_xxxxxxx.
    There are 2 infopackages aand one ODS Activation brefore this inpackage(it is being updated by that ODS).
    Could you please help me in solving this issue.
    Thanks.
    B V

    There is no active Init to ur DS is in place. And hence u need to take an Init.
    Try to maintain different IP's one is for the Init and other one is for the Delta.... the one in the PC will be holds good for the Delta..
    Try create an Init IP if its not there already and then proceed with the load... if there is no data in the target data target as of now.....
    If u have data on the target but some one has deleted the Init flag then u need to check whether all the requests has got posted to the target data target or not.. if  not u need to take care of the action accordinly with the initi-Withoutdata transfer and then proceed with the Deltas...
    thanks
    Hope this helps

  • Error while activating data source in BI

    Hello Team
                     I am facing issues while activating data source. I followed following steps .
    a)First i created my target
    b)Then i made my Primary key as info provider
    c)Then i created one source system under file.
    d)Then i went to data source and created one application component
    e)In this application component i created my data source
    f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .

    Hi,
    Check the gateway settings for
    Gateway Host
    Gateway service
    Also check the UDC connection information.
    Check these links:
    1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
    2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
    3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-  
    expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
    Let us know in case the issue still persists.
    Debanshu

  • How create animated power view reports using sharepoint list as a data source in sharepoint 2010?

    Hi All,
    I got a client requirement to create reports using SharePoint List as data source. The report should show reflection depends on values changed (I mean animation).
    I have heard about the power view/power pivot which does this kind of animations in reports.
    Can someone please guide me on creating reports which shows animations
    In power view/power pivot using SharePoint List as data source in SharePoint 2010.
    Thanks in advance.
    MercuryMan

    Hi MercuryMan,
    Yes, Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 or SharePoint 2013 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience.
    It provides multiple views featuring tiles, slicers, a chart filter, and a number of visualizations, including cards, small multiples, and a bubble chart. So, we can use Power View to do intuitive ad-hoc reporting for business users such as data analysts, business
    decision makers, and information workers.
    Currently, Power View report only supports two types of data models: PowerPivot Worksheet, and data models based on Analysis Services Tabular Model or Multidimensional Cube.
    In your scenario, you can create PowerPivot worksheets using SharePoint List as data source, deploy the PowerPivot worksheet to a SharePoint Library or PowerPivot Gallery, and then generate Power View reports based on the PowerPivot worksheets on the SharePoint
    site.
    To use SharePoint List as data source in Excel PowerPivot, you can refer to the following resource:
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/07/11/excel-services-using-a-sharepoint-list-as-a-data-source.aspx 
    http://technet.microsoft.com/en-us/library/hh230322.aspx 
    To create a Power View report based on PowerPivot model, you can refer to the following links:
    http://technet.microsoft.com/en-us/library/hh231522.aspx 
    http://technet.microsoft.com/en-us/library/hh759325.aspx 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • Whihc extraction types to follow for which type of data sources.

    Hi,
    I have gone through many extraction types like LO, Generic , COPA, LIS etc..
    Can any one please help me in telling whihc extraction types to follow for which type of data sources.

    what do you mean by extraction type? your question is not clear.
    if you are looking for weather we can use the full/delta type to extract the data
    then you can check in the Check in ROOSOURCE tables in ECC. You can find the various options in DELTA field.

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • An error occurred while loading the model for the item or data source 'EntityDataSource'.

    Hi Team,
    We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
    Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
    “An error occurred while loading the model for the item or data source
    'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
    Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
    Installed SharePoint Server 2013 Enterprise edition
    Did not configure it at this time
    Installed SQL Server 2012 with default instance installation (selected every features)
    Later installed SP1 for SQL Server 2012
    After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
    Again installed another Analysis Server and selected the tabular mode of data model
    Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
    Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
    Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances. 
    Questions/Doubts are:
    Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
    Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
    CTP3 software for Power View feature as mentioned in the below link.
    http://technet.microsoft.com/en-us/library/jj219634.aspx
    but we don’t have an option to download CTP3 software now from Microsoft site
    Or do we need to install
    Microsoft SQL Server 2012 With Power View For Multidimensional Models
    CTP
    http://www.microsoft.com/en-sg/download/details.aspx?id=35822
    Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
    http://www.microsoft.com/en-in/download/details.aspx?id=35575
    Error detail :
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
    xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
    the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
    the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
    cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
    cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
    /></detail>
    Please help me in  configuring Power View for SharePoint 2013.
    Thanks in advance.
    Pavan Kumar

    I'll bet that I know the answer to this one - and you probably won't like it ;)
    Here's the telling portion of that error:  "We cannot locate a server to load the workbook Data Model."
    This error is thrown in two scenarios; the first, when you haven't registered an analysis server.  The second appears to be the issue you're having:
    PowerPivot requires SQL Server 2012 SP1.  Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
    Check the version of SQL that you are running.  It should be version 11.0.3000 or greater.  If it's not, you have the wrong "SP1" installed.  The correct one is
    here.
    Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed.  You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
    the databases.  Once you've done that, PowerPivot and PowerView will work properly.
    I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

  • Error while activating Data source

    Hi,
    I hit an error while activating data source with adapter 'WEB_PUSH web service'.
    The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
    I can't find much detail on this error.
    Has anyone hit this error before and if you did can you please let me know what to check?
    Thks & Regards,
    Bbee

    Hi,
    I am having the same problem.  Have you been able to solve the issue since you posted this last year? 
    Thanks,
    TCT

  • Error while importing the tables from MySQL using the data source connection

    Hi,
    I am trying to import tables from MySQL into Powerpivot using the data source connection, if use the import using the Query option its working fine but not with the select list of table option.
    when i click on the select list of tables option, i get the below error after selecting all the tables to be imported:
    OLE DB or ODBC error.
    An error occurred while processing table 'XXXXXXXXXX'.
    The current operation was cancelled because another operation in the transaction failed.

    Hi Bharat17an,
    Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
    http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
    If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
    Regards,
    Elvis Long
    TechNet Community Support

  • Business Content Objects on BI side for the business content data sources

    Hi All,
    We are doing a fresh implementation, and would like to know the step by step way through which i can know the relevant business content objects on BW side for a BC data sources ,,,,,
    0material_attr
    and 0mat_sales_Attrt
    As Per my understanding, once installed the BC data sources, the data would be feed to the master data info object 0material
    But the question is how do i know the complete Business content object on BW / BI side, and use the same building the entire flow.
    I have a hint that we can know it through the help.sap.com, and it would be highly appreciated and awarded for your expertises guidence, i have tried sercing in it, but dont know the correct trick.
    Even for the other  business content data sources.
    Example, the relevant infoobject or the DSO or the Cube,transformation, dtp,etc..
    Thanks
    Daljeet sing Nagi

    Hi Vineeth,
    Do you mean this way in the meta data repository, it will propose the flow for the business content object, and if yes, then even if they are in delivery version and not in active version, still it shall propose the flow for the business content objects,
    And to cut short my requirement,  as specified we are doing the fresh implementation,
    and i have identified that we would require first to load the material master data, and based on our present requirement, the data source which i have identified are
    0material_attr   (for the table mara in ECC system)
    0mat_sales_attr (for the table mvke in ECC system)
    all the fields data would be loaded to which master data info object,
    will it be 0material or ????
    Thanks for your support and surly as promised

  • DSO activation: Data in new data table but missing in active data table?

    we use an end routine in transformation to populate a data field in DSO.
    it works as we can see the value populated in new data table.
    when we activate (activation) DSO, we see the value is deleted from this data field.
    why?
    this data field is set as an characteristic info obj in the data field portion of the DSO.
    we are using 2004s, I forget to check the SP level.
    George

    good job ,thanks for the update and good luck.
    I saw it late on this, else i never miss OSS notes
    Chetan
    @CP..

  • Table for Stock on Specific Date in the Past.

    Hi ..,
    Please give me the Name of the Table to find the stock on Specific Date for a given material in the Past. like the T.code we use MB5B.
    regards.

    Hi
    MB5B uses a list of tables & logic to get the Stock for a particular posting date.
    if you want the stock run this report in your Z- report & export the Values to your Z-report & use them accordingly.
    Hope this helps
    Thanks & Regards
    Kishore

  • Delta field not enabled for selection in  generic data source

    Hi
    I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and  i have  selected that field for the selection option. but after i made it  delta enabled the selection option got disabled.
    Now when i check the info package delta selection tab that date column is not apperaing.
    But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
    I wanted to  take only this months data.
    So is there any option to be set to enable this selection in info package.
    please suggest.
    Regards
    Shilpa

    Hi there,
    That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
    You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
    I don't know if this is possible, this is only an assumption.
    Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
    Also just an assumption, did not try it.
    Diogo.

  • My database not listed at SQL data source in Web Expression 4

    Can anyone help me out?
    Am not sure whether this is the correct place for my problem.
    I set up SQL Server 2005. Created a database named "employee" and a table under it "emp_info"
    I tried to connect it from Microsoft Web Expression 4 through SQL Data Source control. Well, the connection test is successful but the database i created is not shown in the drop down. However, it shows the system databases. 
    Again i create the table under one of the system databases, and tried to connect it. Those system tables which are there from before are only available to connect but not the table i newly created.
    I have checked the properties, permission of the table as well as the database. Nothing is wrong there.
    Will attach screenshot after the forum admin verify me.

    Hi Marconi,
    The forum supports VS setup and installation. Your issue is more about Web Expression 4. But I find the information below from the link:http://www.microsoft.com/expression/eng/#web
    The web is now about applications as well as traditional web sites, and this requires a new set of tools. Microsoft is committed to offering a unified approach to focus on web design and development features in Microsoft Visual Studio 2013 and beyond.
    As part of this consolidation, Microsoft Visual Studio 2013 provides the leading web development tool, which enables you to design, develop, and maintain websites and web applications. Visual Studio 2013 makes it easy to build CSS-based websites from the
    ground up with CSS layouts, HTML5 support and full featured capabilities for working with and debugging JavaScript. Learn more about
    Visual Studio Express 2013 for Web and
    WebMatrix 3.
    It seems you could install VS express 2013 for web to instead it. If you want to install VS express for web and you encounter any issue, you could post the installation issue to here.
    >>No, this is not the correct forum. This forum is for using .Net Framework inside SQL Server.
    The sentense is from the first reply. It seems you first post the issue to SQL server for help. As Erland said, it seems your issue is more about Web Expression 4. Have you solved your issue by using the first reply? If has, please mark the first reply as
    answer. If not, you could post your issue to the related forum for better support.
    http://social.msdn.microsoft.com/Forums/expression/en-US/home?forum=web
    I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

Maybe you are looking for