There are no active responsibilities available for this user
Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal
Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini
Similar Messages
-
OSD Task Sequence fails with "There are no task sequences available for this computer"
Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell. -
There are no traffic sources available to this Database Firewall
Hi, Experts, I want to create " Enforcement Points" in DBforewall. But I get message :"There are no traffic sources available to this Database Firewall, You will not be able to use the system in its current state. Please install more network interfaces and reinstall the Database Firewall software. "
I have two netwotk cards. one is for DBFW access, one is for capture network trafic. Any one can help me?
#ifconfig
eth0 Link encap:Ethernet HWaddr 00:1F:16:2D:77:9D
inet addr:10.182.?.? Bcast:10.182.207.255 Mask:255.255.254.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20991 errors:0 dropped:0 overruns:0 frame:0
TX packets:8187 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2706212 (2.5 MiB) TX bytes:6313332 (6.0 MiB)
Memory:f2600000-f2620000
eth1 Link encap:Ethernet HWaddr 00:1B:8C:25:19:3B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:150859 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25953197 (24.7 MiB) TX bytes:0 (0.0 b)
Interrupt:122
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8863 errors:0 dropped:0 overruns:0 frame:0
TX packets:8863 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6188256 (5.9 MiB) TX bytes:6188256 (5.9 MiB)I think the problem is that as the error message says, you don't have enough network interfaces available.
The installation process creates a network bridge and therefore you need 3 network interfaces: eth0 ist for management access, eth1 and eth2 are the ports for the bridge (an IP will not be assigned for these two interfaces) and at last the br0 interface. When you don't provide enough interfaces during the installation process, the bridge will not be configured and this could be the problem. -
"There is no active delta initialization for this IS/ QS/Data Source."
Hi Friends
I am getting this error message while running the infopackage.
" There is no active delta initialization for this IS/ QS/Data Source."
Start Infopackge zpak_xxxxxxx.
There are 2 infopackages aand one ODS Activation brefore this inpackage(it is being updated by that ODS).
Could you please help me in solving this issue.
Thanks.
B VThere is no active Init to ur DS is in place. And hence u need to take an Init.
Try to maintain different IP's one is for the Init and other one is for the Delta.... the one in the PC will be holds good for the Delta..
Try create an Init IP if its not there already and then proceed with the load... if there is no data in the target data target as of now.....
If u have data on the target but some one has deleted the Init flag then u need to check whether all the requests has got posted to the target data target or not.. if not u need to take care of the action accordinly with the initi-Withoutdata transfer and then proceed with the Deltas...
thanks
Hope this helps -
Kindly let me know if there are special discount offers available for IBM employees ?
Kindly let me know if there are special discount offers available for IBM employees ?
Many companies have EPP (Employee Purchase Programs) with Apple. You need to check your benefits programs offerred by IBM. It will basically be a URL to an EPP login page for the Apple Store.
NOTE: I do not think there is any discount on iPhones.
I have observed that the discounts tend to be around 8% on Pro equipment and 6% on consumer products. But some items the discounts vary depending on the product. And in some cases there is no discount.
Again, check with your IBM benefits. -
I have an Apple iphone , Model MC61OLL version 4.1(8B117). There is no software update available on this phone . WHY????
boblueski wrote:
I have an Apple iphone , Model MC61OLL version 4.1(8B117). There is no software update available on this phone . WHY????
Probably because you haven't updated iTunes to version 10.7. -
I have seen iScreensaver and PulpMotion and several others but I simply wish to convert an mov file to a screensaver that other mac can download. I haven't been able to come across a tutorial for this that works on Lion. Any guidance is greatly appreciated.
Does anybody know how to do this without iDVD?
You can't. You MUST buy iDVD.
Tell Apple how you feel. They do read these comments, and often react. Be nice.
http://www.apple.com/feedback/idvd.html
http://www.apple.com/feedback/
(On the above link, you will notice under Mac apps they do indeed show, iDVD!)
If that doesn't work you can purchase iLife 11 on disk (don't get the download) for about $29. You WILL get iDVD.
or if you like downloads, go to the Apple Store via the Store button at the top, (not the App Store) and look for iLife 11 it will list iWeb and iDVD. It IS available online. -
I would like to create a report from the DB that gives me all users in Project/PWA 2010 where the "Prevent AD sync..." box has been checked in the user/resource configuration, but I cannot find where this is in the Project databases. Our
DB is SQL 2008 R2.
Thanks,
Marty Hadden
MS Project AdministratorHi Marty,
I might be wrong but the Prevent AD Sync details are not available in the Reporting db. Maybe you can check the published/draft databases (not supported) or you can configure a separate custom field and you can duplicate the information for each user
into this field. The custom field can be used in the reports based on the reporting database.
Hope this helps
Paul -
Oracle features available for this scenario
What is the best methos for replcating oracle database from a production database with every 15 min interval..
what are the oracle features available for this scenario
Thanks
Shijuorashiju wrote:
What is the best methos for replcating oracle database from a production database with every 15 min interval..
what are the oracle features available for this scenario
Thanks
ShijuIs there any specific reason to open a new thread for the same discussion that you have started here,
Please suggest a suitable method
Aman.... -
Mac os 9.1 upgrade to tiger - im sure there are postings i will search for
im sure there is some documentation on this issue i will try to search for it in the mean time i thought it would be reasonable to post my issue as an alternate source of aid,
imac with proper system requirements to upgrade to tiger, i never did and upgrade to os x and i unfortunately didnt read or do research prior to installing, when i put the tiger disc in i followed the instructions and restarted, prior to installing anything the os x cd stated that i need to upgrade my firmware then promted me to restart again, upon restart i got blank screen and now the imac power button lights up however the hard drive kicks in then powers down and the mac wont boot, beep, or display any screen images whatsoever, prior to install/upgrade attempt the imac was having trouble with holding the date and time settings, im not sure if that is related to the now non-booting/blank screen issue, i have read a rew articles on the firmware/tiger upgrade issue, i was wondering if there are any fixes or repairs for this issue, any questions please ask ill give you what information i can, thanks
kwinHi, denderah -
Welcome to Apple's Discussions.
The Disuccsions forum software somteimes (for unknown reasons) mangles a posted link to another forum page. Here's a repaired link to the page eww referred to -
http://discussions.apple.com/thread.jspa?messageID=607420
Re the changing date & time, that is a clear indication that the internal battery in your iMac needs to be replaced. That battery, which is used to maintain PRAM and clockchip settings, will wear out over time - the expected life is only about 4 to 5 years. Leaving the iMac unplugged regularly (such as on weekends or overnight) will shorten its life considerably.
For some models of iMacs, the early ones I believe, replacing the battery is not an intended user-level thing to do; on those it is a good idea to take it to an AASP to have it done. -
Hi,
I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
allow "Have full access via EWS to all mailboxes in the organisation".
After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
I passed this token to EWS Java APIs,
it gave me error saying:
microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
I tried similar thing with EWS managed APIs for .net. Got similar error.
Can anyone provide some help and direction to resolve this error.
Thanks & Best Regards,
PranjalI see you found an answer with the X-AnchorMailbox header on StackOverflow:
http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none -
Programs that require a network connection won't work because there is no virtual IP address available for this session. Per application IP virtualization is enabled.
There are in fact available IP address's within the dhcp scope. Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?Hi,
Thank you for posting in Windows Server Forum.
As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
Application Compatibility – Turn on Remote Desktop IP virtualization
Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
configuration of the next setting.
Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
mask using the slash notation, for example 192.168.77.201/24.
Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
More information:
Microsoft RDS Policies explained (Part 2)
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
Configuring Remote Desktop IP Virtualization II
http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
I want to communicate with J1850 system. Is there any hardware available for this?
I would like to communicate with a J1850 system. I am wondering whether there is any hardware available for this similar to CAN. Is there a possibility to find exampls for this kind of communication.
On Fri, 16 Jul 2004 14:02:48 -0500, Mudda wrote:
> I would like to communicate with a J1850 system. I am wondering whether
> there is any hardware available for this similar to CAN. Is there a
> possibility to find exampls for this kind of communication.
I'm still new in this area but I will try to help. AFAIK, J1850 comes in
two flavors: VPW and PWM. You can purchase an adapter that converts RS232
signals to those required by J1850 for about $100.
I suggest using an adapter from Scantool.net. I say this because I
have one and it's very easy to use. It's flexible enough to use with a
terminal (hyperterminal, minicom, etc.) or to interface with LabVIEW, as I
have done for you already. Go to OpenG.org for the download:
http://openg.org/tiki/tiki-index.
php?page=On+Board+Diagnostic+-+OBDII
Let me know if it works for you. The interface is a little weak but the
VIs should clue you in on how to handle communications. I plan to add
another update in a few days so check the site regularly. I would
appreciate your feedback.
-kevin -
That’s all it says in the whole window that opens up. There doesn’t seem to be a specific thing I do that makes it happen and it doesn’t happen every single time I have it open, but pretty close. It seems to happen (most of the time) when I click on the “Today” or “Yesterday” (ect) tabs that organize the emails. But again, it doesn’t happen every time I do this – maybe 8 out of 10 times? It also does it when I just open my Outlook screen to look at it before I even do anything, and sometimes it just does it without even touching it. Also, pretty much every time I send an email it opens a couple pages up. It also doesn’t happen just once, it will open sometimes 5 – 10 of the same screen all at once. My IT person at work suggested deleting Firefox to see if it would stop and it didn't, it would just open up a window saying you have no Firefox so download it. I re-installed Firefox and it still does the same thing – mostly – except now it asks if I want to download the file instead of just opening that white Firefox screen. If I click yes it opens the same screen but it will still open sometimes 5 of those asking if I want to download it.
Microsoft published some articles about this error last year. It might not be the only cause, but can you forward it to your IT for consideration?
[http://support.microsoft.com/kb/2559926 "There are no items to show in this view." error message when you try to view a folder by using Outlook in an Exchange Server 2010 environment] (Group by)
[http://support.microsoft.com/kb/2500648 "There are no items to show in this view." error message when you try to view a folder in Outlook in an Exchange Server 2010 environment] (Sort by Categories)
Edit: As a short-term workaround, what happens if you make IE your default browser? You can still use Firefox as your primary browser, but of course links and shortcuts from other applications or the desktop will open in IE. -
Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.
Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.
Maybe you are looking for
-
Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks
-
How do I Open a New Window to the Same URL?
When I click CTRL-N to open a new WINDOW, is there a way to have that new window open to the SAME URL as the one I was on (instead of opening to my Home Page)?
-
Firefox3 slow performance with APEX apps
Hi all, I've been using Firefox 3 to develop an APEX app (my first). Today, I see that every time I navigate in an APEX form (e.g. Next or Prev row), the HD light on my laptop's docking station glows for a second. After some snooping, I see that FF3
-
[Solved] Yaourt + bash problem?
Hello. For couple of weeks I am occasionally seeing a strange problem. When I use Yaourt I get some issues that I suspect might be caused by some bash configuration problem. Here is the output: $ yaourt -Syua You are not allowed to launch pacman with
-
ZAGG full body shield not really good for white iPhones
Ive installed one of these on my old black 3G....its nice until it start peeling cause of lint and dirt catching on the edges... Since i got the white 3GS...i tried installing the ZAGG shield...i noticed after a few weeks its turning yellowish...its