TS3899 I am trying to pull up an old email that I received and placed in the trash. When I press "load more messages," the older messages do not pop up. What am I doing wrong?

I am trying to pull up an old email that I received and placed in the trash. When I press "load more messages," no additional trash eMails pop up. What am I doing wrong?

You're not looking in your trash can. And if you've emptied your trash can, the message is gone.
To open your trash, you have inboxes on the top, and accounts below. Tap the mail from the accounts. That's where your trash can is. Tap it. If the mail is not permanently deleted it will be in the trash.

Similar Messages

When i choose a picture in Lightroom 5, a popup says file not found. What am i doing wrong?

When I choose a picture in Lightroom 5, and click on Develop, it was file not found. What am I doing wrong?

It means the photo has been moved, renamed or deleted outside of Lightroom (Hint: don't do that)
To fix the problem, either move the photo back to where it was (using your operating system), or re-connect in Lightroom following these instructions: Adobe Lightroom - Find moved or missing files and folders

Not quite sure what I'm doing wrong.

As the topic states, not quite sure what I'm doing wrong here. I'm doing a problem for a class and maybe you guys could help me out, or point me in the right direction. The question states:
"Write a program that reads in investment amount, annual interest rate, and number of years, and displays the future investment value using the following formula: "
futureInvestmentValue = investmentAmount x (1 + monthlyInterestRate)numberOfYears*12
(numberOfYears is to the power)
import javax.swing.JOptionPane;
public class Investment {
     public static void main(String[] args) {
            double investmentAmount;
            double interestRate;
            double investmentValue;
          int years;
          String stringInvestmentAmount = JOptionPane("Please Enter An Investment Amount");
               investmentAmount = Double.parseDouble( stringIvestmentAmount );
          String stringIntrestRate = JOptionPane("Please Enter An Intrest Rate In Decimal Form");
               intrestRate = Double.parseDouble( stringIntrestRate );
          String stringYears = JOptionPane("Please Enter A Number Of Years");
               years = Int.parseInteger( stringYears );
          interestRate = 1 + interestRate / 12; //Monthly interest, I believe this is how you calculate it.
          investmentValue = investmentAmount * Math.pow(interestRate, years * 12); //Now the exponent should be the number of months.
          System.out.println("Your investment value is " + investmentValue + ".");
}My Errors are:
C:\Java\Investment.java:15: cannot find symbol
symbol : method JOptionPane(java.lang.String)
location: class Investment
String stringInvestmentAmount = JOptionPane("Please Enter An Investment Amount");
^
C:\Java\Investment.java:16: cannot find symbol
symbol : variable stringIvestmentAmount
location: class Investment
     investmentAmount = Double.parseDouble( stringIvestmentAmount );
     ^
C:\Java\Investment.java:18: cannot find symbol
symbol : method JOptionPane(java.lang.String)
location: class Investment
String stringIntrestRate = JOptionPane("Please Enter An Intrest Rate In Decimal Form");
^
C:\Java\Investment.java:19: cannot find symbol
symbol : variable intrestRate
location: class Investment
     intrestRate = Double.parseDouble( stringIntrestRate );
     ^
C:\Java\Investment.java:21: cannot find symbol
symbol : method JOptionPane(java.lang.String)
location: class Investment
String stringYears = JOptionPane("Please Enter A Number Of Years");
^
C:\Java\Investment.java:22: cannot find symbol
symbol : variable Int
location: class Investment
     years = Int.parseInteger( stringYears );
     ^
6 errors
Tool completed with exit code 1
Edited by: Close on Oct 23, 2007 4:12 PM

String stringInvestmentAmount = JOptionPane("Please Enter An Investment Amount");What is this line trying to do? If you are trying to create a JOptionPane object and pass that String to the constructor then you need the new keyword. If you are trying to call a method of the JOptionPane class then it would be a good idea to include the method name. I sure you are trrying to do the second option.
Once you fix that, it is likely the other errors will disappear. Or different ones will emerge.

After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

You should be getting an error message that PS CS5 requires a higher version of ACR with two options "render using Lightroom" or "open anyway". You should choose the first option. If you are not seeing the error message then go to your Lightroom prefrences >General Tab> under Prompts> select "Reset all warning dialogs", then try the edit in function again.

Keyer edge tool does not work. What am I doing wrong?

When I am trying to soften the edge on my green screened image I try to use what they call the edge tool.
But it does nothing to the edge of the image, it makes the entire keyed image more transparent or more opaque... this is totally useless... I thought I remembered this working in a previous version but maybe not...
what am I doing wrong? Or is it just not working correctly.
Thanks for any help.
FCPX 10.0.5 OSX 10.6.8

Do you see the Multifox item to open a new window in the File of Firefox menu?
You will see a "New Identity Profile" (Ctrl+Alt+M) in the "Firefox > New Tab" menu and in the File menu (press F 10 if the menu bar is hidden) and in the context menu if you right-click a link.<br />
Choosing that menu entry will open a new window with a new set of cookies marked multifox-profile-2 in the cookie manager.
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.

I recently bought full edition of Lightroom 5 for my Nikon D610 but when i connect my other camera, Nikon D3100 for editing my NEF files it says not supported files.What am i doing wrong?

I recently bought full edition of Lightroom 5 for my Nikon D610 but when i connect my other camera,Nikon D3100 for editing my NEF files it says not supported files.What am i doing wrong?
Thanks in advance

Often, this error message means that you have used some version of Nikon software to transfer the photos to your computer, and this has corrupted the files. There is a fix which uncorrupts the files at http://www.sno.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
But you said you get this message when you "connect my other camera Nikon D3100", the key word being "connect", and this doesn't really fit the description I just gave. This error message normally happens after you have transferred the photos to your computer via Nikon software, not when you connect it. So ... maybe you need to explain a little more ... what exact task (what menu options, what are you clicking on, what are you trying to do) when you get this error.

Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

I've been struggling with a similar issue myself and just figured it out. Some of my content had been purchased with an older Apple ID that I don't use any more. When I authorized my second computer, I only authorized it for my new Apple ID, not my old one. When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized". It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID. I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

I am trying to re-install ITunes on Windows XP. When I do this, all I get is the "save" or "cancel" message, not "run". What am I doing wrong?

Because of getting the message that I had to uninstall Apple Mobile Support Device and ITunes, in order to get my ITunes to be usable, I did that. While trying to re-install ITunes, all I get on the message is the choice to "save" or "cancel". It will not give me the "run" choice. What am I doing wrong? This should be fairly simple to reinstall, I thought.
I am running Windows XP on a desktop computer using Firefox.

Thanks so much. This definitely worked. I'm sorry I did not think of using IE. I use Foxfire exclusively so seldom even think of IE as an alternative.

When I convert my PDF file to either Word or Excel, the result is garbage and not usable. What am I doing wrong?

I have converted two PDF files to both Word and Excel. The result is garbage and unreadable. I want to edit the content of the PDF file and thought that this was the solution. What am I doing wrong?

It's probably not something wrong you're doing, just the way the file was
created. You can look under File - Properties - Description and see what
application and PDF producer were used to generate it. My guess is it was
not produced using Adobe software.
At any rate, there's no a lot you can do about it, I'm afraid. You can try
re-frying it, ie sending it to the PDF Printer to produce a new copy, and
then exporting that to Word/Excel, but that's about it.

The attached VI works when I run it initially creating the XML file, but when run after the XML file is created, it's not updated. What am I doing wrong?

The attached VI works when I run it initially creating the XML file, but when I change data and run after the XML file is created, it's not updated with new data. What am I doing wrong?
Thank you.
Solved!
Go to Solution.
Attachments:
Attractive Force XML.vi ‏23 KB

That looks like the logic which was written into the VI
Inner true/ false case:
(file exists : false) write to XML file, unflatten for display
(file exists : true) read from XML file, unflatten for display
At no time when the file exists (true case) is the XML file updated...

WRT54G does not work or what am I doing wrong?

My setup: DSL -> 2wire modem router (bridge mode, firewall shutdown) ->WRT54G -> LAN with 1 IPPBX, 1 wired PC and 3 wireless PC.
VoIP is running fine within our LAN, we have 2 SIP trunks running fine, But we just cant make an external softphone to work properly from WAN (outside the LAN).
As long as I know, the simplest way to explain what a firewall does is 'everything requested from the inside should be wellcomed, anything unsolicited from the outside should be disallowed UNLESS explicitly told otherwise' this is, why the heck do we have unreachable ports althought we have allow those to receive extern traffic?
Please check the pdf´s (snapshots) here:
http://travelexpress.com.mx/download/router/status.pdf
http://travelexpress.com.mx/download/router/router_firewall.pdf
http://travelexpress.com.mx/download/router/router_forward.pdf
http://travelexpress.com.mx/download/router/scanner.pdf
http://travelexpress.com.mx/download/router/scanner1.pdf
All those are for showing current setup, firewall, port forwarding and the results of a port scanner wich shows that efectively, we cannot use our extern SIP client because the WRT54G is blocking it...
Thanks in advance as we are urged to fix this ASAP

Yes. NAT is a function in the router. Just like the firewall. But still, both are different functions of the router. The firewall filters traffic to the router. NAT is responsible for mapping IP addresses. The reason why unsolicited packets from the internet won't get into the LAN is because NAT cannot deliver those packets and not the firewall rejecting some incoming connection. NAT does not filter. NAT tries to deliver and if it does not know where it drops it. But not because it wants to filter something.
The settings on the router are correct. But as I have mentioned before, forwarding a port does not mean it's open or accessible. There are still other factors which could cause the port to be closed...
Regarding the modem: you can check that if you connect a computer directly to the modem, open a port on the computer and then do the internet port scan again.
I also explained how to check with telnet if TCP port 5060 on the IPPBX is really open or not. Why don't you just do this test? It would be much easier and faster, giving relevant answers. I don't mind whether asterisk usually uses both protocols on 5060 or not. Maybe it does. Maybe not. Maybe it can be configured. Whatever. Enter "telnet 192.168.1.69 5060" into a command prompt window of a computer connected to your LAN and you see if the port is open or not. Then we know something for sure instead of thinking about what should be or should not be...
Also do the same telnet test with port 23 and 80 and then use the internet port scanner to scan for tcp port 23 and tcp port 80. Then we could see if anything goes through or not instead of discussing theory...
I did not say you have to set up a lab setup. I only explained that you were mixing NAT functions and firewall functions of the router. The NAT function may look like some firewall in certain respects but it is still a different function with a completely different purpose.
I also can't say if the IP settings are all correct. Maybe the IP address is correct but the gateway address is not. Or the DNS server.
The subject of this thread is "... or what am I doing wrong?". It's impossible to comment on something if you don't give the details which would allow to verify that you have set it up indeed correct...

My password seems to be working but my apps on my i pad will not update? what am i doing wrong?

i hove not been able to update apps on my ipad for weeks my password seems to work but it will not update apps? what am i doing wrong?

What happens when you try to update? That is the missing element here? Without knowing what you are experiencing, it's really difficult to suggest what to do. I will go on the assumption that you are seeing the "waiting" icons. If that's the case, this is my standard response that includes quite a number of things to try.
Even if it is not the "waiting" icons issue, one of these suggestions might help anyway.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Why is my server not working? What am I doing wrong? settings are posted.

Ok, I'm so overwhelmed, but not willing to give up! I would like to set up this server in my home through our Comcast Cabel modem on a mac mini. Our IP has not changed in 2 years with comcast. If I get this working, I plan to move this server, and go live in our company office, which DOES have a static IP address. But I need to set this up and start testing all the solutions like VPN, iCAL, ICHAT, and Address Book.
VPN has been my main service to set up first and test! IF I can get that to work, I hope to get the others to work as well. It's also the first mission critical. I think my DNS settings are somehow off either at Network Solutions or something on my server...
I've been using "help" from various responses to other problemshere in these discussions and other places, and now, I'm just overwhelmed and confused, so it's now my turn to post the problem and ask for help!
I'll post this with REAL IP information, because I think it will help other people in the same situation. Also, once I get this to work, I plan to move it a new location, and then request a change of my home IP from comcast....
I welcome and REALLY appreciate any help. I'm at wits end... normally, I can figure these kinds of tech puzzles, but I could use guidance here!
Thanks!
Ethan-
I bought and installed OS X server 10.6. on a brand new Mac Mini.
Here is the story. The domain I bought and own is bostonbecker.com
Network Solutions is where I bought and manage the domain. It allows me to change the DNS from theirs to another one, so I have it pointing to a hosting company we use called PaeTec. I can't find a place that lets it point the domain to my home router IP address.
so inside Network Solutions, the domain name servers are
HDNS1.FAST.NET
HDNS2.FAST.NET
The above domain name servers are given to me from dedicated hosting company to point to their computers.
To control that dedicated server from the hosting company, we login to that system via PLESK via Safari.
So, using Plesk, I've logged into our dedicated server, opened the settings for bostonbecker.com and created the following under the control for DNS settings:
In the picture above, the ip address 24.60.63.216 is my home comcast assigned IP address that never seems to change. the IP address 209.92.71.43, is something else, I don't really know, I think ti's from my dedicated server company. that record was there by default when I first set up bostonbecker.com with PLESK. I left it there.. I also left hdns1.fast.net as the value for bostonbecker.com because I did not know what to do with it.
Ok... Now lets come to my new server inside my house with Mac OS X server
Here are my settings:
Below are some basic checks I did in Terminal:
Here is the VPN settings panel:
Below is the L2PT settings
Below is the PTPP Setings:
Below is the iChat server settings:
Below is the router settings I'll change my IP address for security once I get this to work!
Below is a snap shot of the port forwarding on the D-link gaming router:

Hello,
Why are you handing out 192.185.2.1 through 192.185.2.10 in your VPN Addresses
Should this 192.168.0.XXX through 192.168.0.XXX and out of range on what the router is handing out?
Why don't you try making your Server 192.168.0.2 using your router as the gateway of 192.168.0.1
Set your router's DHCP scope 192.168.0.10 through 192.168.0.100
Set your VPN addresses for L2TP 192.168.0.101 through 192.168.0.149
Set your VPN addresses for PPTP 192.168.0.150 through 192.168.0.199
Thanks,
ebrind
Message was edited by: ebrind

I have a lot of friends with an iPhone or iPad,which I can send them messages,but there is one person I can't,I'm in the uk and she is in the us the number she apparently uses to log in is not being recognised,what am I doing wrong

My iMessages work with most of my friends apart from the one that lives in the US,I'm in the UK,the number she uses is to log in,but when I type her name in it says not registered with iMessage,and I don't understand why,is it because with the added international code because I've tried with and without it with no success,please help

Something doesn't seem right here. If she has to use her email address as her contact address in order to message with you, that suggest to me that she either doesn't meet the requirements to use her iPhone number as the contact address (iOS 6 or later with an iPhone number linked to her Apple ID) or there is an issue with the way the phone number is being entered.

The utility, HTML Setup, is not available? What am I doing wrong?

I open a chapter file in FM10. I select File > Utilities, but the HTML Setup... option is ghosted and not selectable. I thought maybe something was wrong with my file, so I tried using one of the sample files provided by Adobe. Still no good. What am I missing???
Appreciate your insights.
Thanks,
Kim

Kim,
The last FM10 patch was in January to fix a licenisng issue that caused FM10 to stop working. It hasn't affected the ability to show the HTML Setup utility on any of the machines here.
The shortcut should be entered as lowercase letters and you press each key (and release) in sequence, <esc> f t h. This brings up the HTML Setup on my installations. If it doesn't on yours, then I suspect something in your installation has been corrupted. Unfortunately, you may need to re-install FM10 (and all of the patches in sequence).
However, before you attempt any re-installs, are you working on structured documents in the strucured mode (this is what it looks like from your screen captures)? If the documents are NOT structured, then try switching to unstructured FM (via the Preferences). Note: do this only if you are completely certain that the docuemnts are unstructured, otherwise FM (after giving you a warning and a chance to bail) will strip out the structure when you open them.

TS3899 I am trying to pull up an old email that I received and placed in the trash. When I press "load more messages," the older messages do not pop up. What am I doing wrong?

Similar Messages

Maybe you are looking for