URL issues?  Can't figure this out

OK, I'm a bit frustrated here. I've created an enhanced podcast using Podcast Maker (made by Lemonz Dream). I have uploaded it to my server (hosted by GoDaddy.com) I submitted my feed to iTunes and it was accepted. I am able to subscribe to it and it shows that I have one episode listed. For some reason I am NOT able to download the episode. iTunes gives me the following error message...
"The URL "http://www.djultimate.com/Podcast/Episode0001.m4a" could not be found on the server."
This makes no sense to me because I can see the file on my server from my FTP client. I can also download it to my desktop from my server via my ftp client so the file is obviously there. I cannot, however, browse to the file in my web browser. Not sure if it's because it's an m4a file or not (I've never tried to browse to an m4a before this). Everything is spelled correctly and all the files names and directories are correct. My feed DOES validate in the feed validator. WHAT AM I DOING WRONG????
Here is the link to my feed...
http://www.djultimate.com/Podcast/podcast.xml

The MIME type is correct according to the iTunes tech spec.
Looking at the source of your XML file, it shows:
http://www.djultimate.com/Podcast/Episode0001.m4a
as the link to download the episode. Clicking on the link or attempting to download the file results in a "file not found" error (mime type errors usually result in a page of ASCII text). So either the file doesn't exist in that specific location or has a different name. In most cases urls and filenames are case sensitive, meaning that http://www.djultimate.com/Podcast/Episode0001.m4a is completely different from http://www.djultimate.com/podcast/episode0001.m4a
and so on.
Make sure that the filename that you see on your FTP site, matches the filename in your XML exactly.
Erik

Similar Messages

  • Can't figure this out- cable connection vs wifi connection

    Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
    Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
    Message was edited by: Alan Schmidt

    Am having the same problem.
    Everything was working fine until yesterday.
    Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
    iPods and iPhones can still use the wifi to get on the internet.
    If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
    Have tried changing ethernet cables and still no go.
    Can't figure this out.

  • Can't figure this out: locating a MBP on the same wifi network

    Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
    Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
    Message was edited by: Alan Schmidt

    Am having the same problem.
    Everything was working fine until yesterday.
    Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
    iPods and iPhones can still use the wifi to get on the internet.
    If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
    Have tried changing ethernet cables and still no go.
    Can't figure this out.

  • In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

    in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

    The switch is in the upper right of the viewer.

  • How can I figure this out?

    Very simple function, but as a beginner, it's still difficult for me.
    my mouse wants to detect boxes on the canvas and return the center coordinate of these boxes, how can i figure this out? The game will be, if point(x,y) is inside a box , return box Center

    I just noticed that you are placing them on Canvas and it is not a container object. One solution would be to keep track of boundaries of those clickable areas and whenever a click occurs, a check which box was clicked, if any. I hope this helped.

  • WHY!!!!! I can't figure this out

    Why my girlfriend is getting the message that her "remote IP address is invalid" I can't seem to understand or figure this out...

    They should turn off Internet Sharing in System Preferences > Sharing if it is On
    Are either of you running Internet Sharing? If so, turn it off.
    They should not be letting Parallels connect using the Mac's IP if they run Parallels.
    Do either of you use Parallels Desktop or VMWare Fusion to run windows on you Mac? If so, turn off their access to the internet in their settings or preferences.
    They should not be connected to the Router via wireless (Airport card) and Wired (Ethernet) at the same time.
    Are either of you connected to both Ethernet port and Airport wireless at the same time. If so, disable one of the network configurations. Either unplug the cable or turn Airport off.
    They should not have two DHCP servers in a modem and router on their LAN.
    How are your router and modem configured. If they are both distributing IP addresses, then you need to either set your router to bridge mode or set the modem to assign just one IP address. I don't know what hardware you have, so I can't begin to tell you how to configure either. Unless it is an Airport Base Station, most modems and routers are configured through a Web interface. Airport Utility will let you configure the Airport Base Station.

  • HT201364 wow - can't figure this out -

    I can't figure out how to tell what operating system I'm using and in the downloads it tells me to download OS X Mavericks and then it gives me a system error  Very frustrated

    You can find out what OS you are using by clicking on the apple icon in the top left corner of your screen and clicking about this mac. you can then use the version number to find out what operating system you are using.
    Version 10.5 Leopard
    Version 10.6 Snow Leopard
    Version 10.7 Lion
    Version 10.8 Mountain lion
    Version 10.9 Mavericks

  • I have a report from WhatisHang which (in theory) tells my why my firefox constantly hangs up. But I need someone who can help figure this out.

    I hope this section will work, i couldnt find a place for Hang ups, and this problem doesnt usually cause a full crash, which is why it was hard to figure it out.
    I finally used the program WhatisHang to try to get an idea of what is causing the seemingly random hanging, but have been unable to find anyone who can help me with it.
    I have posted the Troubleshooting Information, though i dont think it would be of much help.
    I have the report available but dont know where i can post it.

    I must admit I seem possibly to be suffering from hangs also, although as I am often not in a hurry when using firefox on this machine it has little impact. I am using a legacy computer and tend to blame this on the computer or maybe background tasks such as from security software or indexing.
    '''Do you still get the hangs in safe mode with all''' (or maybe all but one essential plugin if you think a plugin is involved in the hangs) '''plugins disabled ?
    Have you tried to rule out
    * background tasks are the problem, <br/>(at least monitor what else is running using Task Manager or sysinternals process explorer)
    * [[is my firefox problem a result of malware|malware]]. <br/>( consider full system scans with multiple tools/software)
    * any other interacting programs or plugins <br/>(some may not be listed in firefox, you may need to check / uninstall from the OS {Windows Control Panel})
    **it may also be an idea to check hangs still occur when WhatIsHangs is not in use.
    * have you tried logging the cc & gc times in the error console, <br/>(if for instance you see times in 1000s of milliseconds appearing you may have then identified one reason for firefox being unresponsive, even if the cause is not yet identified. - a symptom the memshrink firefox developers will no doubt be eager to investigate)
    * if you can get hangs in safe mode, on at least the Aurora channel releases I suggest you immediately go ahead and file a bug yourself. (I will try to find time if not today then next weekend to look more closely at my own system to see if it is showing hangs in firefox use)
    ** ideally try with all default preferences
    ** As you have changed preferences, I suggest you include as a attachment in the bug your list of user modified preferences (use ''about:support'' or Troubleshooting Information option)
    ** State what security software is in use, it could be an important factor.<br/> (I imagine the majority of users have security software, or if not have security vulnerabilities and potentially an undetected malware problem)
    I will try to find and download a copy of WhatIsHang, see if it works on my system and what results it then shows.
    I realise I have not said anything terribly helpful I solving your problem, but I suspect you are not alone in having hangs, if you are able to spare the time to investigate and report I am sure it will help others.
    Firefox has had a few problems recently that would have been solved sooner if they were investigated when first reported, but unfortunatly an advantage of firefox is how easy it is to customise, but the downside is differentiating between a firefox fault and customisation problems.

  • I can't figure this out for some reason.

    I want to use a template in DVD studio pro and have the button text fade in at a certain point and have it be highlitghed when it is selected. It seems like it should be a simple thing but I can't figure out how to do it.
    Thank You
    Vincent LeGrow

    You would need to animate the background then bring the overlay in (fade in fade outs as part of movie.)
    Take a look here for how to do it (this example uses some items from DVD SP templates but would work otherwise, you can skip down to step 8 or so)
    http://www.dvdstepbystep.com/ira/

  • Self Assigned IP address – can't figure this out. Frustrated.

    This is a long post but bear with me. It proposes a challenge for the mac connoisseur. Who knows? Might be fun?
    OK, here goes:
    Please help. I have been trying to fix this for about 7 months. I first noticed this issue when I started traveling around the country, from hotel to hotel. While others (PC's and Mac's) had no trouble connecting to the free wifi at these hotels, I did. I kept getting "self-assigned i.p."
    This was extremely frustrating. I often had to call up the i.t. guys and ask them to help me manually put in ip address, subnet mask, router (gateway), and dns. This worked much of the time but not always.
    Let me also say that, sometimes it worked perfectly! I'd say about 25% of the time (at these hotels) my internet worked perfectly – just connected immediately. The other 75... "self-assigned i.p."
    I just spoke to the mac "geniuses" and they told me it's not an issue with my computer at all (either hardware or software). Are you kidding me?!?! How can they explain everyone else's internet working except mine. And I'm talking like 100 or more different hotels in a 4 month period. They were trying to tell me that it was just a coincidence every time! "You'd be surprised" one guy said. Hahaha. They said that the routers aren't accepting my computer's whatever. OK, well WHY?! The router works for everyone but me. It's something wrong with my computer right?! Well no one acknowledged this.
    More background info:Just had my airport card and logic board replaced. Computer came back and the sheet said "passed all hardware tests." BUT, none of my issues (I had other ones too involving battery life and not being able to access certain websites) were fixed.
    I went to an apple store. They told me to do an erase and reinstall or whatever. So I did that (by dragging and dropping everything I'd saved on an external hard drive using disk utility). By the way, I also upgraded from leopard to snow leopard. So now, if I have the same issues after this I'll know both leopard and snow leopard are screwed up.... right?
    OK, so I followed their instructions on deleting and reinstalling to a tee and guess what?! Everything worked! Or so it seemed. Battery fine. Websites now accessible. I figured the airport issue was fixed too. But now that I'm not touring anymore and the airport works in my house, I never encountered any issues. Until now. At my work.
    I got a new job and it's one in which I HAVE to have a computer that connects to the internet. So of course, the same issue with self assigned i.p. presents itself. Everyone else in the office has no problem. Including a Mac person that used to work there.
    I've been reading some other threads that are just completely confusing me. One of them might be the solution but I thought I'd detail my troubles so that some smart computer person out there can diagnose my specific problem and give me a specific fix.
    I noticed that many people believe there was a bug in one of the 10.5 updates. I am pretty quick to install updates (maybe I shouldn't be because I hear that the first updates are often buggy and maybe you should wait for a while). But this problem has continued now with Snow Leopard too so... I don't know. I don't know anything anymore. I have tried everything. And Apple is telling me it's not a problem with my computer. Give me a break.
    One more interesting quirk: before doing the erase and reinstall my computer could not find the Apple Store's network. After the erase and reinstall it works. That's why I assumed everything was fine! But no. And now the Mac people are saying there's no problem because they can't see it.
    BTW, I have tried all the obvious things. It's not an obvious thing. But I mean, if you think it is... then tell me I guess. But I've been in the advanced tab thousands of times. I feel like I've exhausted everything in there.
    Thank you thank you thank you in advance if someone is actually able to solve my issue.

    continuation of console log:
    Feb 1 13:08:45 localhost kernel[0]: npvhash=4095
    Feb 1 13:08:45 localhost kernel[0]: PAE enabled
    Feb 1 13:08:45 localhost kernel[0]: 64 bit mode enabled
    Feb 1 13:08:45 localhost kernel[0]: Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
    Feb 1 13:08:45 localhost kernel[0]: vmpagebootstrap: 507215 free pages and 17073 wired pages
    Feb 1 13:08:45 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Feb 1 13:08:45 localhost kernel[0]: migtable_maxdispl = 73
    Feb 1 13:08:45 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    Feb 1 13:08:45 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    Feb 1 13:08:45 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Feb 1 13:08:45 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Feb 1 13:08:45 localhost kernel[0]: calling mpopolicyinit for Quarantine
    Feb 1 13:08:45 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    Feb 1 13:08:45 localhost kernel[0]: calling mpopolicyinit for Sandbox
    Feb 1 13:08:45 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    Feb 1 13:08:45 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Feb 1 13:08:45 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Feb 1 13:08:45 localhost kernel[0]: MAC Framework successfully initialized
    Feb 1 13:08:45 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
    Feb 1 13:08:45 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Feb 1 13:08:45 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Feb 1 13:08:45 localhost kernel[0]: mbinit: done (64 MB memory set for mbuf pool)
    Feb 1 13:08:45 localhost kernel[0]: rooting via boot-uuid from /chosen: 5924DB5A-4C9F-323F-BC39-2469AEAB4D18
    Feb 1 13:08:45 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string> <key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Feb 1 13:08:45 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    Feb 1 13:08:45 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    Feb 1 13:08:45 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 001b63fffe8a7584; max speed s800.
    Feb 1 13:08:45 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0 /AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver /IOAHCIBlockStorageDevice/IOBlockStorageDriver/FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Untitled@2
    Feb 1 13:08:45 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Feb 1 13:08:45 localhost kernel[0]: [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
    Feb 1 13:08:45 localhost kernel[0]: [Bluetooth::CSRHIDTransition] transition complete.
    Feb 1 13:08:45 localhost kernel[0]: CSRUSBBluetoothHCIController::setupHardware super returned 0
    Feb 1 13:08:45 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    Feb 1 13:08:45 localhost kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
    Feb 1 13:08:45 localhost kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
    Feb 1 13:08:46 localhost kernel[0]: yukon: Ethernet address 00:1b:63:94:9c:ad
    Feb 1 13:08:46 localhost kernel[0]: systemShutdown false
    Feb 1 13:08:47 localhost kernel[0]: NVDANV50HAL loaded and registered.
    Feb 1 13:08:47 localhost kernel[0]: Previous Shutdown Cause: 5
    Feb 1 13:08:47 localhost kernel[0]: Atheros: mac 12.2 phy 8.1 radio 12.0
    Feb 1 13:08:47 localhost kernel[0]: DSMOS has arrived
    Feb 1 13:08:47 localhost kernel[0]: AirPort_AthrFusion: Ethernet address 00:1e:52:77:13:82
    Feb 1 13:08:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
    Feb 1 13:08:56 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    Feb 1 13:09:05 Michael-Pines-MacBook-Pro kernel[0]: Warning - com.apple.driver.InternalModemSupport declares no kernel dependencies; using com.apple.kernel.6.0.
    Feb 1 13:09:13 Michael-Pines-MacBook-Pro kernel[0]: en1: 802.11d country code set to 'US'.
    Feb 1 13:09:13 Michael-Pines-MacBook-Pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    Feb 1 13:12:08 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 13:15:38 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    Feb 1 13:15:39 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 13:18:08 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    Feb 1 13:18:08 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: hibernate image path: /var/vm/sleepimage
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: sizeof(IOHibernateImageHeader) == 512
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 5
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 7 (Frame received from nonassociated STA).
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: en1: 802.11d country code set to 'US'.
    Feb 1 13:31:48 Michael-Pines-MacBook-Pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    Feb 1 13:31:50 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 13:31:50 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 7 (Frame received from nonassociated STA).
    Feb 1 13:31:50 Michael-Pines-MacBook-Pro kernel[0]: System SafeSleep
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: hibernatepage_listsetall start
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: hibernatepage_listsetall time: 114 ms
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: pages 274489, wire 35250, act 50684, inact 887, spec 62, zf 137, throt 0, could discard act 24613 inact 28670 purgeable 6142 spec 128044
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: hibernatepage_listsetall found pageCount 87020
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: IOHibernatePollerOpen(0)
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: writing 86158 pages
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: image1Size 73471488
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: PMStats: Hibernate write took 4108 ms
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: all time: 4108 ms, comp time: 592 ms, deco time: 0 ms,
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: image 166148608, uncompressed 353234944 (86239), compressed 162715248 (46%), sum1 dc78ee00, sum2 4fe372a2
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: hibernatewriteimage done(0)
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: sleep
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: Wake reason = UHC3
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: System Wake
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: Previous Sleep Cause: 0
    Feb 1 13:41:07 Michael-Pines-MacBook-Pro kernel[0]: USB (UHCI)ort 2 on bus 0x5d has remote wakeup from some device
    Feb 1 13:41:08 Michael-Pines-MacBook-Pro kernel[0]: en1: 802.11d country code set to 'US'.
    Feb 1 13:41:08 Michael-Pines-MacBook-Pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    Feb 1 13:41:09 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 13:50:04 Michael-Pines-MacBook-Pro kernel[0]: IOHIDSystem::relativePointerEventGated: VBL too high (33307137), capping to 20000000
    Feb 1 13:55:23 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    Feb 1 13:55:23 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 13:59:32 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    Feb 1 13:59:32 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 15:24:13 Michael-Pines-MacBook-Pro kernel[0]: systemShutdown true
    Feb 1 15:24:13: --- last message repeated 1 time ---
    Feb 1 15:24:13 Michael-Pines-MacBook-Pro kernel[0]: Kext loading now disabled.
    Feb 1 15:24:13 Michael-Pines-MacBook-Pro kernel[0]: Kext unloading now disabled.
    Feb 1 15:24:13 Michael-Pines-MacBook-Pro kernel[0]: Kext autounloading now disabled.
    Feb 1 15:24:13 Michael-Pines-MacBook-Pro kernel[0]: Kernel requests now disabled.
    Feb 1 15:24:32 localhost kernel[0]: npvhash=4095
    Feb 1 15:24:32 localhost kernel[0]: PAE enabled
    Feb 1 15:24:32 localhost kernel[0]: 64 bit mode enabled
    Feb 1 15:24:32 localhost kernel[0]: Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
    Feb 1 15:24:32 localhost kernel[0]: vmpagebootstrap: 507215 free pages and 17073 wired pages
    Feb 1 15:24:32 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Feb 1 15:24:32 localhost kernel[0]: migtable_maxdispl = 73
    Feb 1 15:24:32 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    Feb 1 15:24:32 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    Feb 1 15:24:32 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Feb 1 15:24:32 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Feb 1 15:24:32 localhost kernel[0]: calling mpopolicyinit for Quarantine
    Feb 1 15:24:32 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    Feb 1 15:24:32 localhost kernel[0]: calling mpopolicyinit for Sandbox
    Feb 1 15:24:32 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    Feb 1 15:24:32 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Feb 1 15:24:32 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Feb 1 15:24:32 localhost kernel[0]: MAC Framework successfully initialized
    Feb 1 15:24:32 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
    Feb 1 15:24:32 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Feb 1 15:24:32 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Feb 1 15:24:32 localhost kernel[0]: mbinit: done (64 MB memory set for mbuf pool)
    Feb 1 15:24:32 localhost kernel[0]: rooting via boot-uuid from /chosen: 5924DB5A-4C9F-323F-BC39-2469AEAB4D18
    Feb 1 15:24:32 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key> <string ID="1">IOResources</string><key>IOResourceMatch</key> <string ID="2">boot-uuid-media</string></dict>
    Feb 1 15:24:32 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    Feb 1 15:24:32 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    Feb 1 15:24:32 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 001b63fffe8a7584; max speed s800.
    Feb 1 15:24:32 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriv er /FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Untitled@2
    Feb 1 15:24:32 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Feb 1 15:24:32 localhost kernel[0]: [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
    Feb 1 15:24:32 localhost kernel[0]: [Bluetooth::CSRHIDTransition] transition complete.
    Feb 1 15:24:32 localhost kernel[0]: CSRUSBBluetoothHCIController::setupHardware super returned 0
    Feb 1 15:24:32 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    Feb 1 15:24:32 localhost kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
    Feb 1 15:24:32 localhost kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
    Feb 1 15:24:33 localhost kernel[0]: yukon: Ethernet address 00:1b:63:94:9c:ad
    Feb 1 15:24:33 localhost kernel[0]: systemShutdown false
    Feb 1 15:24:44 localhost kernel[0]: Previous Shutdown Cause: 5
    Feb 1 15:24:44 localhost kernel[0]: Atheros: mac 12.2 phy 8.1 radio 12.0
    Feb 1 15:24:44 localhost kernel[0]: NVDANV50HAL loaded and registered.
    Feb 1 15:24:44 localhost kernel[0]: DSMOS has arrived
    Feb 1 15:24:44 Michael-Pines-MacBook-Pro kernel[0]: AirPort_AthrFusion: Ethernet address 00:1e:52:77:13:82
    Feb 1 15:24:44 Michael-Pines-MacBook-Pro kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
    Feb 1 15:24:45 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    Feb 1 15:24:45 Michael-Pines-MacBook-Pro kernel[0]: en1: 802.11d country code set to 'US'.
    Feb 1 15:24:45 Michael-Pines-MacBook-Pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    Feb 1 15:24:51 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 1 15:24:52 Michael-Pines-MacBook-Pro kernel[0]: Warning - com.apple.driver.InternalModemSupport declares no kernel dependencies; using com.apple.kernel.6.0.
    Feb 1 15:25:35 Michael-Pines-MacBook-Pro kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).

  • HT201274 How do I erase all content and settings on my ipod touch when I don't have my password or the original computer?  I can't figure this out and it is frustrating me.  I need to completely reset my ipod touch. I think it is in dfu mode now

    How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer?  This is very frustrating and I think I have it in the DFU mode.  I can't seem to figure out how to completely restore this ipod touch.  Please help.

    Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • I still can't figure this out...Help!

    Wow, my head hurts from trying to get Qmaster up and running...all the wasted hours! Anyways,
    I have a DP 2.5GHz G5 and a DP 1.25GHz G4...the G5 has FCS installed (5.1.4), G4 only has Qmaster related items installed and both computers running 10.4.8 networked via ethernet through (100mbs hub) the G5 in Qmaster sys pref set to "services and cluster controller", G4 set to "services only' and both only have the source "Compressor" used - both shared and managed checked (I don't have Shake, so I un-checked those).
    In QAdmin, I have my cluster "G5 Cluster" which contains both the G4 and G5. When I export from FCP using compressor option, only G5 runs...(I am chossing the "G5 Cluster" in the drop down menu in Compressor)... If I export from FCP using self contained QT movie, then run Compressor (from G5) and try and compressor that movie, only the G4 runs. I can not get both computers to run simultaneously on the same job. I have "Job Segmenting" checked in the Inspector in Compressor
    I have scoured the disscussions looking for answers and it seems that exporting from FCP using Compressor only uses the machine(s) that have FCP installed on it...is this correct?
    I have also read that maybe I need to install Compressor on my G4 (according to the manual I don't) but do I?
    Maybe it is not even worth it...if someone out there doesn't think it is (in my case) please don't hesitate to say so...because at this point I am about to give up on Qmaster. Thanks in advance.
    Dave

    HI dave,, yes very strange indeed.
    My first port of call is usually to lock at the:
    • QMASTER console logs. Use /applications/utilities/console.app .. look closely and there will be something of interest in there for you, particularly the ~/..logs/QMASTER..
    • also look in there also for compressor.
    I have some mention of this (as do many smilar posts) in a post I did some time back at:
    http://discussions.apple.com/thread.jspa?threadID=951536&tstart=0
    I found the log helpful to resolve may of these funny things in QMASTER.
    Sounds like a resource "unavailable" issue.. such as one servioce node cannot access the resoures it needs.
    If this is tha case and (you dont have an SSAFS like XSAN), then make sure you have all the resources (inputs, outputs etc) MOUNTED and available to the G5 and the G4 (over NFS - your 100baseT or pt/pt 1GbE).
    Oh and inparocula the compressor option "DONT COPY from SOURCE" or what ever it is.. som make sur all the OBJECTS are available to each machone. Check the GROUPS if you have to in the finder (get info +i) for deatios and permissions.. maybe this could be an issue too.. bit it doesn't sound like if you have alternatively runnign form compressor then our of FCP...
    MY initial guess is that QMASTER has a look around and the resources if needs for that machine (either of your two hosts) are not there on that machne where it wont run.
    Also check out the detail in the BATCH MONTOR. It would likely have a softerror in the display saying that something didn't fire up.
    Anyway. if you find somthing interetsing in the QMSTER log, feel free to post it.
    good luck

  • I just can't figure this out

    I have had my bb for about a year or so now and it was working okay. Within the last couple of months I just can't seem to connect the bb to sync w my computer or download anything because the "USB device not recognized" then when I go to check it tells me that no drivers are installed for this device but yet the drivers are supposed to come from my phone. I tried downloading device manager I don't even know how many times now and nothing because my device is not being recognized because there are no drivers. Can someone please tell me how I can download these stinkin drivers to my handheld? And... Now I am losing my txt messages, mms messages and emails. The phone flashes that I have messages and when I open my messages they disappear. What is that all about? I am getting so frustrated with this thing it's not even funny. And for the amount of money we paid for these things you'd figure they'd WORK! I just don't know what to do anymore. Please someone help me. Flustered!

    For memory issue please perform the following steps -
    Give a soft reset by removing the battery for 30sec.
    Check how much memory is free in your device to Options -> Status -> Free Memory. To view all the database size go to Option -> Status -> click Menu button then select Database Sizes
    Delete less frequently used application. To delete go to Options -> Advanced Options -> Applications -> highlight the application you want to delete -> click Menu and select Delete
    If you stored your picture in device memory them move them to your media card
    Check the below Knowledge Bases - 
    Email messages are deleted from the BlackBerry device
    How to maximize free space and battery power on the BlackBerry smartphone
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • HT204365 I have many PDFs in my iBooks , but I cannot transfer them out or email them? I'm trying to view them in a PDF reader but its as if these docs are permanently stuck in there even though everything is stored in iCloud.  I can't figure this out.

    My PDFs stored in iBooks cannot be transferred out reviewed by other apps this is very frustrating because I have many manuals documents and check list all in iBooks but it seems that once you choose to "open in iBooks" this document is now stuck trapped inside here and I am unable to view any of these PDFs with a more dance PDFReader.
    Yes I'm enabled iCloud on both my PDFReader's and in my iPad for my documents.  I can't even select one of my PDFs to transfer into my dropbox or another cloud storage device so again these documents which I've collected over the last few months or now trapped in this horrible PDF reading program.

    When I open emails with PDFs I click on the attachment (doing this all on my iPad) it gives me the option to "open in iBooks", I accept then after that the document is sucked into my iPad but I can't do anything with the PDF after that.  Where is the actual file on my iPad? Why can't I email or send these PDFs to my cloud (Dropbox)?
    It's like once they go into iBooks they're stuck forever.

  • DVD burning - Can't figure this out

    I've exported my 35 minute sequence to compressor then to DVDSP and the resulting DVD is poor:  colors are off, shakes and jiggles in my stills, video cuts out momentarily in spots, interlacing on some clips.   My settings and workflow are as follows:
    Sequence Settings:
    Pixel Aspect Ratio (HD (1440x1080).   Anomorphic 16:9 is UNchecked
    Field Dominance:  Upper (Odd)
    Editing Timebase:  29.97
    Quicktime Video Settings . Compressor: HDV 1080i60
    Audio:  48kHz
    Depth: 16 bit
    Video Processing: Render in 8-bit YUV
    The media used for the sequence includes HDV, stills, Pro Res LT. 
    Also, I have used some Magic Bullets Looks filters
    I use File > Export > Quicktime Movie
    Make Movie Self-Contained is checked
    Recompress All Frames is unchecked
    Setting:  Current Settings
    In Compressor, I'm using DVD Best Quality 90 Minutes
    I have NOT tweaked the Video Fromat or Quality settings in the inspector tab. These settings are as follows:
    Video Format: Automatic
    Frame Rate:  Automatic
    Aspect Ratio:  16:9
    Field Dominance:  Automatic
    Average Bit Rate is 6.2mpbs
    Maximum Bit Rate is 7.7Mbps
    Motion Estimation:  Best
    Mode:  Two pass VBR Best
    Resize Filter:  Better (Linear filter)
    Output Fields:  Same as source
    Deinterlace:  Fast (Line averaging)
    Anti-alias:  0
    Details Level:  0
    Rate Conversion:  Fast (Nearest Frame)
    Any suggestions as to how I can improve the qualithy of my outcome?  I'm inexperienced with FCP and DVDSP.  A lot of this stuff is just too complicated for me.  All I want is a good quality DVD that doesn't look like crap.  What am I doing wrong?  thx

    Try this
    1. Set your sequence (timeline) compressor to ProRes @ 1920x1080 square pixel
    2. Convert your HDV material to ProRes @ 1920x1080 square pixel. All your video material should be the same format.
    2a. Make sure your stills are smaller than 4000 pixels in any dimension. It is best if they are no larger than they need to be. You DO NOT want to scale up still images.
    3. Edit your material
    4. Output a self contained file using "current settings"
    5. Use Compressor to create your m2v and ac3 files for the DVD. If the program length is less than an hour, use a CBR (constant bit rate) conversion at 6 to 7 mbs. 7 mbs may cause some older players to choke.
    6. Bring the compressed video and audio files into DVD, build and burn your DVD.
    x

Maybe you are looking for