In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.
in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.
The switch is in the upper right of the viewer.
Similar Messages
-
How do I sync one photo from my iPhone 3G to computer. My only option is to sync all new photos. Do I need iPhoto?
Yes, you do need iPhoto, or at least for the following: Plug it into the computer with the USB plug you get with it, and iTunes will automatically open. It doesn't matter if you keep it open or not, because you'll import them to iPhoto. When you open iPhoto, it will automatically go to your iPhone's inventory of photos. Choose a photo that you wish to import (or click import all), type in the titile, and click import. A pop-up message will come up that asks if yu want to keep originals. Click yes, and viola. Your photos are on your computer! Hope this helps.
-
my family shares one apple id among 4 devices. how do i make it IMPPOSSIBLE for my children (i pad mini and i pod touch 5) to view my contacts and texts while still sharing my apps? please help. been working on this for hours.
Delete your account in 1. "Settings > iCloud" + 2. "Settings > Messages > Send & Receive" + 3. "Settings > FaceTime", but still let them using your account for iTunes and app purchases in "Settings > iTunes & App Stores". Of course, please make sure that they do not know your password to set up your account for iCloud again or purchase anything alone.
-
Can't Figure This Out....Need Help.
I am attempting to add a line score from a minor league
baseball team to a website of mine (it's an actual "in progrss"
line score that updates itself). It looks like it uses a feed of
somesort with a page refresher, but I can not identify what it is
from looking at the source code.
The format I really want looks like this website:
http://web.minorleaguebaseball.com/clubs/ip_index.jsp?sid=milb&cid=t525
However, I would be more than happy to get something that
looks like the line score from this website (on the right above the
standings):
http://www.clippersbaseball.com/
Any insight would be appreciated. Thanks in advance.
MCyou might want to explain what your problem is in the title
of your post. a lot of people don't even look at ones that say
something like "need help" without any explanation of what the
actual problem is.
that being said, from what i can tell from the code of those
pages, it looks they created some kind of database or something for
those stats thingies. which means it's probably not something that
you can just copy and implement on your own site. you might have to
create your own database.
but maybe someone else will have some ideas. again, you might
want to repost or change the name of this thread, if that's
possible. i doubt you'll get many more responses to this
one. -
How can I figure this out?
Very simple function, but as a beginner, it's still difficult for me.
my mouse wants to detect boxes on the canvas and return the center coordinate of these boxes, how can i figure this out? The game will be, if point(x,y) is inside a box , return box CenterI just noticed that you are placing them on Canvas and it is not a container object. One solution would be to keep track of boundaries of those clickable areas and whenever a click occurs, a check which box was clicked, if any. I hope this helped.
-
I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?
Hello Unconscious2015,
Thanks for using Apple Support Communities.
If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Take care,
Alex H. -
Can't figure this out- cable connection vs wifi connection
Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan SchmidtAm having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out. -
Can't figure this out: locating a MBP on the same wifi network
Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan SchmidtAm having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out. -
when i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email
hi i think you can used itools is very esye for add and delete eny thing that is link http://www.itools.cn/multi_lang_pc_download.htm
-
WHY!!!!! I can't figure this out
Why my girlfriend is getting the message that her "remote IP address is invalid" I can't seem to understand or figure this out...
They should turn off Internet Sharing in System Preferences > Sharing if it is On
Are either of you running Internet Sharing? If so, turn it off.
They should not be letting Parallels connect using the Mac's IP if they run Parallels.
Do either of you use Parallels Desktop or VMWare Fusion to run windows on you Mac? If so, turn off their access to the internet in their settings or preferences.
They should not be connected to the Router via wireless (Airport card) and Wired (Ethernet) at the same time.
Are either of you connected to both Ethernet port and Airport wireless at the same time. If so, disable one of the network configurations. Either unplug the cable or turn Airport off.
They should not have two DHCP servers in a modem and router on their LAN.
How are your router and modem configured. If they are both distributing IP addresses, then you need to either set your router to bridge mode or set the modem to assign just one IP address. I don't know what hardware you have, so I can't begin to tell you how to configure either. Unless it is an Airport Base Station, most modems and routers are configured through a Web interface. Airport Utility will let you configure the Airport Base Station. -
I can't figure this out for some reason.
I want to use a template in DVD studio pro and have the button text fade in at a certain point and have it be highlitghed when it is selected. It seems like it should be a simple thing but I can't figure out how to do it.
Thank You
Vincent LeGrowYou would need to animate the background then bring the overlay in (fade in fade outs as part of movie.)
Take a look here for how to do it (this example uses some items from DVD SP templates but would work otherwise, you can skip down to step 8 or so)
http://www.dvdstepbystep.com/ira/ -
HT201304 I just can't figure this out . how can I do a restriction on my ipad help me please
And I cannot get rid of games the once that being downloaded help please
You can set restrictions via Settings > General > Restrictions e.g. hide Safari, iTunes, music or films/TV programmes via their age rating. If you are having problem doing that then what exactly are you trying to do and what happens when you try to do it ?
To delete an app, press and hold any of the apps on your iPad's homescreen and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the apps shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off' -
How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer? This is very frustrating and I think I have it in the DFU mode. I can't seem to figure out how to completely restore this ipod touch. Please help.
Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode -
I am used to working on duel monitors. I bought a new MacBook Pro 15' yesterday, the adapter for my monitor, and the monitor is on with the generic background but I can't drag any windows over to it. I can do it on PCs but can't figure out on the Mac. Can someone please help the noob out?
Thanks
NikkiThe blue blocks in that screen are Icons for your actual screens. Their sizes are proprtional to the number of pixels in each screen. They can be dragged to new locations relative to each other -- as long as they are touching at some point. You are expected to drag them so that they correspond with the actual screen location on your bench, so that the movement from one scrren to the other is intuitive.
The white stripe represents the menuBar. It can also be dragged to any screen, and that screen will then be the one with the MenuBar. It will also become the screen with the Startup icons on it. -
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
Hi there,
Thanks for reaching out to the community.
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
Best of luck!
Maybe you are looking for
-
My Facetime keeps freezing and showing poor connection
I have recently purchased a new iPad mini and when i use Facetime the screen freezes to a blur of the screen image and "poor connection, video will resume when connection improves" appears on the screen. I have been through all the Apple support trou
-
Yahoo mail loads in my Firefox browser in different sizes.
At first it was regular size; for a few weeks it has been larger, but yesterday and today it is so smal it is unreadable. Changing the screen resolution makes no difference. It also hasn't done this in Windows Explorer yet. How can I fix this? Thanks
-
Photobooth and Isight Video camera with slash through it. Need help. Thx
I have a slash through my video camera and cannot use photobooth for either video or still photos. How can I correct this? Thanks.
-
Layout of excel exports look like #+% !!!
Hi everyone, i want to create an agent session, which sends excel exports via mail. This is working, but ... - the layout isn't useable ! - it seems to haven't any kind of format. --> Is there a possibility of customisation? That's really important .
-
Active Job Options folders nested in hot folders no longer an option?
This was possible in Acrobat 6.0 (nesting job options in hot folders to produce files with different options using the same distiller automatically). Any Ideas why this does not work in Acrobat 9? The How-to is on this website. http://www.planetpdf.c