Vi reference exe is not working

Please any one solve this. In my application application.exe will ask for the vi to execute. I suppose to give defects_feature_information.vi in that path. If that defect_feature_information.vi path is selected from folder its not showing any error.Executing fine. Problem : I builded my application along with defects_feature_information.vi as always included. So I suppose to choose path as H:/my project/Application.exe/Defects_Feature_Information.vi . In this case it shows error. Please anyone help me out. I have included my exe and VI. Note: ProgOpenaVI LV 8.0.vi is top level vi
Solved!
Go to Solution.
Attachments:
ProgOpenaVI LV 8.0.vi ‏13 KB
Defects_Feature_Information.vi ‏128 KB

Hi anitha,
Can you please elobrate what is actually happening.
Do 1 thing use one indicator to see the path it is taking when you are building exe file.
Use application directory instead of absolute path & that additional SubVI should be inside exe folder than the path of SubVI should be application directory \ folder name of SubVI.
Try this
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Similar Messages

Disp+work.exe is not working

Hi Gurus.........i have system ecc6.0 installed , unfortunatly the disp+work.exe is not working (gray in color) .Please help me out.
below is the dev_dsp file details :
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        EC6
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2196
Fri Sep 19 21:26:44 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2196) [dpxxdisp.c   1237]
     shared lib "dw_xml.dll" version 75 successfully loaded
     shared lib "dw_xtc.dll" version 75 successfully loaded
     shared lib "dw_stl.dll" version 75 successfully loaded
     shared lib "dw_gui.dll" version 75 successfully loaded
     shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Sep 19 21:26:49 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00                           <
DpShMCreate: sizeof(wp_adm)          18304     (1408)
DpShMCreate: sizeof(tm_adm)          3994272     (19872)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1440)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E40
DpShMCreate: allocated tm_adm_list at 05EF65C0
DpShMCreate: allocated tm_adm at 05EF65F0
DpShMCreate: allocated wp_ca_adm at 062C5890
DpShMCreate: allocated appc_ca_adm at 062CB650
DpShMCreate: allocated comm_adm at 062CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0634E450
DpShMCreate: allocated gw_adm at 0634E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0634E4C0
DpShMCreate: allocated wall_adm at 0634E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Sep 19 21:26:50 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Sep 19 21:26:52 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2628
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1044
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Sep 19 21:26:55 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
Fri Sep 19 21:27:06 2008
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c   11586]
Fri Sep 19 21:27:12 2008
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00                           <)
DpStartStopMsg: start msg sent
Fri Sep 19 21:27:20 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Sep 19 21:28:30 2008
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Sep 19 21:28:33 2008
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Fri Sep 19 21:28:52 2008
ERROR => W0 (pid 2636) died [dpxxdisp.c   14241]
ERROR => W1 (pid 2644) died [dpxxdisp.c   14241]
ERROR => W2 (pid 2652) died [dpxxdisp.c   14241]
ERROR => W3 (pid 1632) died [dpxxdisp.c   14241]
ERROR => W4 (pid 908) died [dpxxdisp.c   14241]
ERROR => W5 (pid 2660) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2668) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2676) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2684) died [dpxxdisp.c   14241]
ERROR => W9 (pid 640) died [dpxxdisp.c   14241]
ERROR => W10 (pid 2692) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2700) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 732) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:02 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Sep 19 15:59:02 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2636 Ended         no      1   0             0
1 DIA     2644 Ended         no      1   0             0
2 DIA     2652 Ended         no      1   0             0
3 DIA     1632 Ended         no      1   0             0
4 DIA      908 Ended         no      1   0             0
5 DIA     2660 Ended         no      1   0             0
6 UPD     2668 Ended         no      1   0             0
7 ENQ     2676 Ended         no      1   0             0
8 BTC     2684 Ended         no      1   0             0
9 BTC      640 Ended         no      1   0             0
10 BTC     2692 Ended         no      1   0             0
11 SPO     2700 Ended         no      1   0             0
12 UP2      732 Ended         no      1   0             0
Dispatcher Queue Statistics               Fri Sep 19 15:59:02 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          10
wake_evt_udp_now     0
wake events           total     6, udp     2 ( 33%), shm     4 ( 66%)
since last update     total     6, udp     2 ( 33%), shm     4 ( 66%)
Dump of tm_adm structure:               Fri Sep 19 15:59:02 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Sep 19 15:59:02 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:07 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc6_EC6_00                           < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name           MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2628)
killing process (2628) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1508 (pos=2)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1508
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1536 (pos=3)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1536
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2196) [dpxxdisp.c   10259]
Good Bye .....

The work process are dying
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241] *** ERROR => W2 (pid 2652) died [dpxxdisp.c 14241
This lead the dispatcher to emergency shutdow:
DISPATCHER EMERGENCY SHUTDOWN ***
if the dispatcher cannot start the work process it force the shutdown.So, you need to check
at the work process trace (dev_w*) files to find out the reason the they are dying.
@deeptss
if you are talking about the WARNING
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0)took 5 seconds ***
this is a normal situation if the reverse name resolution is not working.
I have found this error when the DNS server has without the reverse zone configured.
However this is not a problem to the dispatcher operation.
Cheers
Clebio

The CMS.exe is not working.

Hi all,
The CMS.exe is not working.
SIA is running and using port 6410.
CMS is not running, even that is using port 6400.
In the last log file of the CMS is see the following:
(err.m_IDSError == IDS_ERR_CMSSYSTEMDB_NODATABASECONNECTIONSAVAILABLE : Error refreshing CMS listeners: ).
The database look ok, so i guess there is somthing i can not see.
How can i find the issue with teh DB? or maybe it relates to somthing else....?
Thanks,
Doron

Hi Mandar,
Please check this:
Error:
The root server reported an error Initialization Failure. (Reason: CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)
Cause
Timeout while waiting for database resources.
Resolution
On the server machine, navigate to Central Configuration Manager (CCM).
Stop the Server Intelligence Agent (SIA).
Go to the properties of the SIA.
Navigate to 'Startup' tab.
In the 'Local CMS' section, double click on the Central Management Server, a 'Server Properties' dialog box would appear.
Add the switch -ndbqthreads 10 -maxobjectsincache 100000 at the end of the command line.
Start the SIA.
Please try the above steps and share your feedback.
Thanks,
Arun

Cross reference or hyperlinking not working for InDesign CS5 Book to ePub

I cannot get hyperlinks or cross reference links to work when generating an ePub from InDesign CS5. (7.0.0.355, Mac OS 10.6.2)
Here's how to recreate a simple test demonstrating the issue.
1. Create a new InDesign Book (File -> New -> Book)
2. Create document one (File -> New -> Document)
3. Create a text box and type "Table of Contents"
4. Create document two (File -> New -> Document)
5. Create a text box in it and type "Story One"
6. Create a new paragraph style and assign it to the Story One text
7. Save document 2. I just kept the name Untitled-2.xhtml
8. Back in document 1, add a cross-reference and select document 2, the style you created, and then "Story One". "Story One" should now appear under the previously typed Table of Contents text, and when highlighed, should show it is an active cross reference in the Hyperlinks panel.
9. Save document 1. I just kept the name Untitled-1.xhtml
10. Add both documents to the Book and save the book.
11. From the Book panel, select Export Book to EPUB...
12. Save the epub file and open it in Adobe Digital Editions.
Note that the text "Story One" appears as a hyperlink but when clicked does not switch to the document 2. It does nothing apparent when clicked.
Looking at the XHTML source for the first document, it is immediately evident why. The filename for document 2.thml is missing. It looks like this: <a href="#anchor-anchor">
When it should be : <a href="Untitled-2.xhtml#anchor-anchor">
The same thing works if you create a hyperlink instead of a cross reference.
I note then when I use the option to go to the destinate reference in the Cross Link (hyperlink) panel, it does switch to the second InDesign docuemtn. So the cross reference is functioning (in InDesign). But the link is broken in the ePub for the above mentioned reason.
Bug? Something I'm overlooking?
Entire source of Untitled-1.xhtml:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Untitled-1.xhtml</title>
<link href="template.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="untitled-1">
<div class="generated-style">
<p class="basic-paragraph" xml:lang='en-us'><span class="no-style-override">Table of Contents</span></p>
<p class="basic-paragraph" xml:lang='en-us'><span class="no-style-override"><a href="#anchor-anchor">‚Äústory one‚Äù</a></span></p>
</div>
</div>
</body>
</html>

As far as I can tell, it has NOT yet been fixed in CS5.5. I'm having the same problem. I have about 90 hyperlinks to fix.
And the explanation that Teus Dejong gives indicates it's not going to be that helpful: "we have found that only the links in documents split by the CS5 exporter will be fixed. For books the script does only work for references to earlier documents in the book, not for forward references. This means in practice that for most books the script will not repair the links and should be seen as a means to add the year only. At the moment I see no way to repair this, because the book epub output of InDesign does not contain sufficient information to repair links referencing forward to others documents in a book."
It's pretty discouraging.

Program Files (x86) 32 bit iexplore.exe does not work--how do I fix/install

HP Pavilion Model #: p6404y
Product #: BK168AA-ABA
Software Build #: A1NAv6PrA6
OS: Windows 7 Home Edition 64 bit
Error Message: Installation Error
Problem/Issue: when attempting to activacte new Anti-virus program I purchased, the system is trying to use Internet Explorer in the Program Files (x86) 32 bit iexplore.exe (that does not work). The 64 bit - Program Files/Internet Explorer/iexplore.exe does work... How do I fix/install 32 bit version of IE back to my system (in this directory)?

Hi,
Try the following.
Click the Start Menu and select Control Panel. Open Programs and Features, Click 'Turn Windows features on or off' and remove the tick next to Internet Explorer 9 Click Yes then OK and then when done, restart the PC.
When Windows has restarted, click the Start Menu and select Control Panel. Open Programs and Features, Click 'Turn Windows features on or off' and re-enter the tick next to Internet Explorer 9. Click Yes then OK and when this has finished installing, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MCPR.exe is not working, how can I delete McAfee Antivirus?

Hello - I am lost. I need to delete the McAfee Software completely. I need to install a different antivirus for business reasons. I removed the software in the programm list. But the new Antivirus was not working probably. So I deinstalled the new antivirus and I downloaded MCPR.exe but if I try to install as Admin nothing happens. What can I do? Many thanks for help!!

Download AppRemover then run it, it will uninstall any security app on your PC completely and get rid of all its registry entries to avoid future conflicts when installing a new Antivirus
Additionally, if you had already uninstalled the previous security solution, it has an option to simply clean out any left overs
This is a must have app I say! It saves you from formatting your computer just to install a new antivirus without any conflicts
ASUS G750JX-CV050H | i7-4700HQ @ 2.40 GHz. | 32 GB DDR3 1600 MHz. Hynix RAM | 256 GB LiteOn LCM-256M3S SSD + 1 TB Seagate Momentus ST1000LM024 5400 RPM HDD | GeForce GTX 770M 3 GB GDDR5 RAM | 17.3" Full HD 3D Glossy Screen

MDT - Custom Reference Image does not work with Task Sequence, normal Windows 7 Enterprise Iso media works fine.

Hi,
Our MDT server is acting strange!
I have previously had this system running without problem - i could both capture and deploy computers as is and no changes have been made to mdt.
But my latest capture does not work. When i capture my reference maching in my VM environment it completes without errors and i can import the latest wim file.
When i deploy the tast sequence, it install the custom Wim image, but it ends up with "login" screen as the administrator i have entered for the capture/deploy sequence, but it goes to stop at this point and applications is not installed.
If i change the ISO in the task sequence under Install OS step, to a clean Win7 install media then the capture completes and install applications.
I have also tried to:
Capture reference without password
Capture reference without Windows updates
Customsettings.ini, bootstrap, BDD.log and SMSTS.log to be found here: https://onedrive.live.com/redir?resid=ED5029A20300B814!365&authkey=!AALV1b2ubD0laEE&ithint=folder%2cini
Hope you will be able to assist,
Regards,
Anders

if you have noticed your smsts.log, there is same error multiple -
Executing in non SMS standalone mode. Ignoring send a task execution status message request
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
User did not specify local data drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume A:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume D:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume X:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume Z:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
TSM root drive = TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
We do not find an available volume to store the local data path
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Save the current environment block TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save environment to (80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to persist execution state. Error 0x(80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save execution state and environment to local hard disk
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Start executing an instruciton. Instruction name: Gather local only. Instruction pointer: 1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSCurrentActionName=Gather local only
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
what about the mass storage driver in your boot image, is it updated?
Md.Waseem Please remember to click “Mark as Answer” on the post that helps you. Thank you.

BExAnalyzer.exe does not work anymore after upgrade to FEP 3

Dear all,
after installing FEP 3 I noticed the following behaviour:
If I try to run the new Bex Analzer from the Menue (Start -> Programs -> Business Explorer -> Analyzer) nothing happens at all. Neither Excel does start, nor the Analyzer plugin is loaded at all. A start from C:\Program Files\SAP\Buiness Explorer\BI\BExAnalyzer.exe) does as well not work.
But running the Excel macro directly from C:\Program Files\Common Files\SAP Shared\BW\BExAnalyzer.xla starts Excel and the plugin is working as expected.
So the question is: is it a bug or a feature?
Best regards,
Andreas

I checked all components of the installation and everything seems to be ok. The only thing that I fell over is the statement
"Ensure that the BExAnalyzer Application has authority to create dll's in the user's temp folder"
Do I really have to take care of this? How? (I already disabled the virus scanner, but the result is the same - it's not working)...
Thanks,
Andreas
PS: Can someone tell me in more detail, what the BExAnalyzer.exe is trying to do?

Runtime.exe() is not working from within a jar file.

Hi All,
I have a jar file which have classes and a package in it.
One of these classes is calling another class which is present in the package.
The code i am using it is as follows:
Runtime r=Runtime.getRuntime();
Process p=null;
p=r.exec("java deep.slideshow.PlayShow");It is working fine when i am executing it without making jar file.
But when i make a jar file of all these things , this exec() is not working.
I have tried a lot.
If any body has any idea suggest me.
Thanks

thanks a lot for your reply friend.
I tried the same you tell me to do by using the cmd;
java -cp my.jar package.class And then tried to make the jar file with the help of eclipse,
after adding my jar file into classpath of my project in eclipse.
Its working fine on my local system.
But when i put this jar file on some other system it does not call my jar file(obviously bcz it will not the find the jar file according to the classpath set on my local system. )
Is there any way that i can keep this jar into my project and then can give the classpath dynamically
so that it can pick the file from my project automatically.?
Later on i will pack this whole thing into a full jar file and it will work on a single click.
Is it possible or not ?
Please suggest me.
Thanks

JavaScript API Reference: AdfRichTable .getWidth not working.

Hello, I need to write a JAVASCRIPT function that returns the width of table every time is called. The table "id" is 't1'.
My first version of the function was something like this:
          function getElementWidth(event) {
              var tElem = document.getElementById('t1::ch');
              var tWidth = tElem.style.width;
              component = event.getSource();
              AdfCustomEvent.queue(component, "customEvent",{width : '' + tWidth},true);
              event.cancel();
          }The function works fine, still I don't like it because making use of 't1::ch' (which is actually a div inside a more elaborate css/html/javascript construct) is more like a hack.
My next idea was to write another function, making use of AdfPage.PAGE.findComponent.
The function should be something like this:
          function anotherFunction(event) {
             var table = AdfPage.PAGE.findComponent('t1');
             alert(table);
             alert(table.getWidth());
          }The firtst alert window shows: +AdfRichTable [oracle.adf.RichTable] id=t1+
The second alert window shows: null
Any ideea why the getWidth function is not working accordingly ?

I've changed the script. I now create my path layer using the below function. However, even after explicitly changing the ruler units to PIXELS, the paths I create all seem to be measured in POINTS. Even if the original ruler unit is PIXELS this still happens. Is there any way around this (that is backwards compatable)?
function createPathLayer(title, subPathArray)
    var docRef = app.activeDocument;
    var originalUnit = app.preferences.rulerUnits;
    alert("Orig units " + originalUnit);
    app.preferences.rulerUnits = Units.PIXELS;
    var myPathItem = docRef.pathItems.add(title, subPathArray);
    alert("New units " + Units.PIXELS);
    app.preferences.rulerUnits = originalUnit;

Add reference to winSCP not working in Production

Hi,
I have basic knowledge in c#, I'm developing a website by using visual studio 2012, one fuction is to sftp file to remote server, I noticed that sftp is not supported by asp.net, I downloaded third party dll file (winSCP), in the visual studio I did add
reference to the dll file and I could sftp and work normally. but then when I needed to transfer my website to the production server, I got error below:
Compiler Error Message: CS0246: The type or namespace name 'WinSCP' could not be found (are you missing a using directive or an assembly reference?)
Line 10: using System.IO;
Line 11: using System.Xml.XPath;
Line 12: using WinSCP;
Line 13: using System.Web.SessionState;
Line 14: using System.Threading;
C:\Windows\SysWOW64\inetsrv> "C:\Windows\Microsoft.NET\Framework\v4.0.30319\csc.exe" /t:library /utf8output /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_32\System.Web\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll" /R:"C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscorlib.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Entity\v4.0_4.0.0.0__b77a5c561934e089\System.Web.Entity.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll" /out:"C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.dll" /D:DEBUG /debug+ /optimize- /w:4 /nowarn:1659;1699;1701;612;618 /warnaserror- "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.13.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.3.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.1.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.18.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.11.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.6.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.4.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.16.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.5.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.14.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.2.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.0.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.12.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.17.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.7.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.10.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.15.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.9.cs" "C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\07c93e6a\1853e4e4\App_Web_1p011v4r.8.cs"
Microsoft (R) Visual C# Compiler version 4.0.30319.18408
for Microsoft (R) .NET Framework 4.5
Copyright (C) Microsoft Corporation. All rights reserved.
d:\inetpub\wwwroot\Dev_Final\intermediateLoad.aspx.cs(12,7): error CS0246: The type or namespace name 'WinSCP' could not be found (are you missing a using directive or an assembly reference?)
d:\inetpub\wwwroot\Dev_Final\Profile_result.aspx.cs(12,7): error CS0246: The type or namespace name 'WinSCP' could not be found (are you missing a using directive or an assembly reference?)
d:\inetpub\wwwroot\Dev_Final\Search.aspx.cs(12,7): error CS0246: The type or namespace name 'WinSCP' could not be found (are you missing a using directive or an assembly reference?)
Please I need your help ... thanks a lot in advance,
Firas

Hi Firas,
Thank you for posting in MSDN forum.
Since this forum is to discuss this Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
As you said the issue, since it is related to this ASP.NET website, so I suggest you could post this issue directly to the ASP.NET forum:http://forums.asp.net/ , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Disp+work.exe is not working in ecc6.0 with sql database

hi this is suhana presently i am installing ecc6.0 and sql server database ,recently my mmc console is not starting
in mmc disp+work.exe not started ,problem is message server is connected dialog is standstill 0.00, jccontrol is not connected.plz send reply as early as possible to my mail
thank you

I guess you should first check your sapstart.log, to see which profile is being called. check sapstartsrv.exe if version is consistent with disp+work.exe, and sap services is maintained startup properly (Control Panel -. Administrative Tools -> Services)
then check if the profile is ok.
then check dev_disp dispatcher log for error, in case disp+work.exe has been triggered to startup...
Regards,
Vincent

Exe file not working with forced download script.

I have a captivate file that I exported as an exe file for
pc. It works fine when I download it from the server using the
direct URL to the file but I don;t want people to actually see
where it is located so I have a used a force-download php script.
When I download it by way of the script... it downloads, but the
file won't play. All I get is a DOS window pop up and then goes
away. Same file...any ideas?
The php file I'm using to force the download is below...
<?php
$filename = $_GET['file'];
// required for IE, otherwise Content-disposition is ignored
if(ini_get('zlib.output_compression'))
ini_set('zlib.output_compression', 'Off');
// addition by Jorg Weske
$file_extension =
strtolower(substr(strrchr($filename,"."),1));
if( $filename == "" )
echo "<html><title>Download
Error</title><body>ERROR: download file NOT SPECIFIED.
USE force-download.php?file=filepath</body></html>";
exit;
} elseif ( ! file_exists( $filename ) )
echo "<html><title>Download
Error</title><body>ERROR: File not found. USE
force-download.php?file=filepath</body></html>";
exit;
switch( $file_extension )
case "pdf": $ctype="application/pdf"; break;
case "exe": $ctype="application/octet-stream"; break;
case "zip": $ctype="application/x-compressed"; break;
case "swf": $ctype="application/x-shockwave-flash"; break;
case "doc": $ctype="application/msword"; break;
case "xls": $ctype="application/vnd.ms-excel"; break;
case "ppt": $ctype="application/vnd.ms-powerpoint"; break;
case "gif": $ctype="image/gif"; break;
case "png": $ctype="image/png"; break;
case "jpeg":
case "jpg": $ctype="image/jpg"; break;
default: $ctype="application/force-download";
header("Pragma: public"); // required
header("Expires: 0");
header("Cache-Control: must-revalidate, post-check=0,
pre-check=0");
header("Cache-Control: private",false); // required for
certain browsers
header("Content-Type: $ctype");
// change, added quotes to allow spaces in filenames, by
Rajkumar Singh
header("Content-Disposition: attachment;
filename=\"".basename($filename)."\";" );
header("Content-Transfer-Encoding: binary");
header("Content-Length: ".filesize($filename));
readfile("$filename");
exit();
?>

Actually...never mind. This script creates a HUGE security
risk....

Far.exe is not working with FMS 5.0

When try to change the .asc extension to .ase far.exe has prompt error. same time when run far.exe for server 3.5 on 32 bit machine it works fine.
My observation when i am using For each it fails too for server 3.5 for 32 bit machine.
thanks in advance.
Vishal Sood

aamirik, you've answered your question in your own first post.
You solved your own question. App World is NOT availabe in Pakistan.
RIM has explained in the past that they cannot offer AppWorld in countries where the carriers have not agreed to support AppWorld. Apparently your Pakistani moble providers need to step up to the plate.
So, your problem lies at home.
Good luck.
There are other places you can purchase applications. Try mobihand.com
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Kd.exe commands not working - "has no export"

I'm looking for some help figuring out why commands I've used in the past with windbg and kd are no longer working. I'm not a kd wiz and I'm sure I'm missing setup somewhere, or I'm neglecting a step, but I can't figure out what I'm missing.
I'm using a customer supplied full kernel memory dump as I have in the past, but when I try the command
"!mem" instead of my memory usage, I get the error
"No export mem found". When I try "!objects" I get a similar error "No export objects found". Even "!findstack mysymbol" gives the error
"No export findstack found". What am I missing?
Here's my kd startup command line:
kd.exe -v -y c:\path\to\my\symbols -z c:\path\to\memory.dmp
My kd.exe version is "6.3.9600.17298 AMD64"

'!<cmd>' are extension commands:
Using Debugger Extension Commands
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560098(v=vs.85).aspx
Kernel-Mode Extensions
http://msdn.microsoft.com/en-us/library/windows/hardware/ff551891(v=vs.85).aspx
Besides, !findstack is 'user mode':
User-Mode Extensions
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560035(v=vs.85).aspx
Useful commands:
.chain (List Debugger Extensions)
http://msdn.microsoft.com/en-us/library/windows/hardware/ff562212(v=vs.85).aspx
.load, .loadby (Load Extension DLL)
http://msdn.microsoft.com/en-us/library/windows/hardware/ff563964(v=vs.85).aspx
With MS extension-dlls
!<module>.help
should give a short overview.
With kind regards

Vi reference exe is not working

Similar Messages

Maybe you are looking for