View Interface exception-OPM
Hi,
When we create an OPM Warehouse, there are some conditions to fulfill the creation of virtual sub inventory automatically by the system.
1. Three or Four characters followed by a colon for the Inventory organization Name.
2. Inv Org should be a process enabled and attached to a plant Organization which has a valid Company set with Fiscal policy.
But the system also validates the PO Box character length that is defined in the Inventory Org Location definition.
When the character length exceeds four, then the Virtual Sub inventory is not created automatically.
So what we did is, we assigned the location to the Inv Organization, once the system created the virtual sub inventory.
Since we have to assign a PO Box number having five characters we followed the above step.
In the other way initially we defined the PO Box number to four characters(Dummy),once the virtual sub inventory is created, we changed the dummy PO Box number to five characters(which is required) and run the Synchronize all Process Inventory Organizations program.
When we run the View Interface exception report we are able to view an exception for the changed location as shown in the report.
Even after this exception we are able to perform all transactions normally without any error like Inventory receiving, transfers and etc for the warehouse (Inv Org)
Please help us,whether we may face any impact in future for this Exception Message.
Regards,
JK
Cde can throw an excpetion... but, a method in Cde that is overriding a another method (in this case doinSmith() from Abc) that does not throw an exception, the method cannot throw an excpetion either. When overriding a method, the parameter list must be the same as the method it is overriding, the method cannot be more private than the method it is overriding, the return type must be the same, and any exceptions throw by that class must be of the same class or a subclass of the same class that is throw by the parent method.
Similar Messages
-
An error occured within an XI interface: Exception occurredS:BBP_CF:037
Hi
I am getting an error as described below in XI . The error is while calling inbound proxy . This is a PurchaseOrderConfirmation in SRM system. has any one faced a similar exception ....how to debug this ...is it an error in abap code
An error occured within an XI interface: Exception occurredS:BBP_CF:037 -No confirmations could be entered for purchase order 4100007164 Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line:
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global">
- <standard>
<faultText>An error occured within an XI interface: Exception occurredS:BBP_CF:037 -No confirmations could be entered for purchase order 4100007164 Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks
PrashanthHi Prashanth,
Check these..
R/3(MM) -XI- SUS Scenario Error
PurchaseOrderConfirmation in SRM 4.0
cheers,
Prashanth
P.S Please mark helpful answers -
An error occurred within an XI interface: Exception occurred
Hi
I am doing a scenario in which I am integrating R3-XI-SUS for PO,PO Response, ASN,GR and INVOICE.
In which PO, PO Response and ASN working fine but when I am sending GR from R3 to SUS it is coming to XI correctly but it is received in SUS with error i SXMB_MONI it is showing following error:-
<b>An error occurred within an XI interface: Exception occurred A:BBP_PD:002 -Document already exists. Check your entries Programm:: CX_BBP_BD_ERROR===============CP; Include:CX_BBP_BD_ERROR===============CM002;</b>
What does this error means?
Do anyone have solution to this problem.
it's urgent
Thanks in advance
Thanks and Regards
SamiHi,
As far as I understand this issue is not related to XI. Itseems there is some configuration mistakes from the SUS side.
Please check with the functional consultant.
Regards,
Kumar
P.S: Reward Points if Helpful!!!!! -
An error occurred within an XI interface: Exception occurred A:BBP_PD:002
Hi
I am doing a scenario in which I am integrating R3-XI-SUS for PO,ASN,GR and INVOICE.
In which PO and ASN working fine but when I am sending GR from R3 to SUS it is coming to XI correctly but it is received in SUS with error shown below.
An error occurred within an XI interface: Exception occurred A:BBP_PD:002 -Document already exists. Check your entries Programm:: CX_BBP_BD_ERROR===============CP; Include:CX_BBP_BD_ERROR===============CM002;
Do anyone have solution to this problem
it's urgent
thanks in advance
thanks and regards
SamiHi
<b>Please see the following SAP OSS Notes, which will definitely help -></b>
Note 922190 - SRM-SUS: Confirmation response can not be identified in SUS
<u>Other related OSS Notes -></u>
Note 1026638 - GR Output Integration with MM-SUS Scenario for R/3 <= 47-
Note 1051424 - Incorrect display of SUS Confirmations status
Note 1026326 - Cannot accept GR with role SAP_EC_SUS_INVOICER
<b>Related links -></b>
SUS to SRM PurchaseOrderConfirmation error for limit order
Re: SRM ServiceAcknowledgementConfirmation fail going into SUS
Cancellation from SUS hangs in XI interface
Hope this will help.
Regards
- Atul -
Hi All,
I am trying to open an custom OAF page. It is throwing the below error message,
"You have encountered an unexpected error. Please contact the System Administrator for assistance."
I need to view the exception details. Can anyone please tell me what is the profile i need to enable in order to view the exception details thrown in the page.
Thanks,
Rajesh SM.Thanks for providing the details, able to view the exception details now.
Regards,
Rajesh SM. -
Hi All
i have a problem with parser views.
i want to make a view where its only possible to change the vlan on a given port.
i have tryed a number of possibilities and now im ready to give up .
when i make the view i have to define every gigabit or Fastethernet port, i need a command that can allow access to all gigabitethernet ports without giving them access to execute all comannds in interface config.
my view looks like this
parser view int
secret 5 $1$ZPxG$PZ.izEXhrKjTYPZVhuldu1
commands interface include switchport
commands configure include interface
commands exec include-exclusive configure terminal
commands exec include configure
if i want to allow access to an interface port i need to add
commands configure include interface gigabitethernet1/0/1
and i rather not add all 28 ports i that manner, is there a command that fixes my problem?DETAILED STEPS
Command or Action
Purpose
Step 1
enable view
Example:Router> enable view
Enables root view. Enter your privilege level 15 password (for example, root password) if prompted.
Step 2
configure terminal
Example:Router# configure terminal
Enters global configuration mode.
Step 3
parser view view-name
Example:Router(config)# parser view first
Creates a view and enters view configuration mode.
Step 4
secret 5 encrypted-password
Example:Router(config-view)# secret 5 secret
Associates a command-line interface (CLI) view or superview with a password.
Note
You must issue this command before you can configure additional attributes for the view.
Step 5
commands parser-mode {include | include-exclusive | exclude} [all] [interface interface-name | command]
Example:Router(config-view)# commands exec include show version
Adds commands or interfaces to a view.
parser-mode --The mode in which the specified command exists.
include --Adds a command or an interface to the view and allows the same command or interface to be added to an additional view.
include-exclusive --Adds a command or an interface to the view and excludes the same command or interface from being added to all other views.
exclude --Excludes a command or an interface from the view; that is, customers cannot access a command or an interface.
all --A "wildcard" that allows every command in a specified configuration mode that begins with the same keyword or every subinterface for a specified interface to be part of the view.
interface interface-name -- Interface that is added to the view.
command --Command that is added to the view.
Step 6
exit
Example:Router(config-view)# exit
Exits view configuration mode.
Step 7
exit
Example:Router(config)# exit
Exits global configuration mode.
Step 8
enable [privilege-level] [view view-name
Example:Router# enable view first
Prompts the user for a password, which allows the user to access a configured CLI view, and is used to switch from one view to another view.
After the correct password is given, the user can access the view.
Step 9
show parser view all
Example:Router# show parser view
(Optional) Displays information about the view that the user is currently in.
all --Displays information for all views that are configured on the router.
Note
Although this command is available for both root and lawful intercept users, the all keyword is available only to root users. However, the all keyword can be configured by a user in root view to be available for users in lawful intercept view and CLI view. -
How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem
Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Hi,
i am running a nVision report to NO SUCCESS POSTED
and below is the error appearing, pls helpp
'Excel interface exception [E:\pt85113b-retail\peopletools\src\psnxl\gridapp.cpp:3563] To prevent possible loss of data, Excel cannot shift nonblank cells off of the worksheet. Select
another location in which to insert new cells, or delete data from the end of your worksheet.
Regards SaiyedHave you looked at E-NV: PeopleTools 8.50, nVision Errors With "Excel Interface Exception" On Windows 2008 R2 Doc ID 1240723.1 yet? It sounds like it may fit your problem.
-
Discoverer viewer interface error
We installed the latest patch to Discoverer 4i on a Win2000 server. Discoverer plus works fine but we get the following error in the Viewer: "Session interface incorrect. Expecting version 4.1.13 got version 4.1.10." Has anyone seen this error or know how to fix? Thank you.
This is the reply I received from oracle support in case any else has a similar problem:
This error may come if discoverer patch is not applied correctly. Have you ensured that you have no discoverer process running such dis4pr ,dis4ws ,osagent and oad .
Was your http server shutdown while installing the patch.
IF you have done it all I still suggest you to apply the patch again.
If it does not allow to apply the patch in that case you need to modify your nt.rgs file found %oracle_home%/806/orainst
Identify the line having discoverer version. Search for word in Discoverer in nt.rgs
Except for the documentation version which will be 4.1.33f change all the versions to your old version .i.e to say 4.1.42.0.0
Now save the file and try to resinstall the patch.
Note: Please take back of your nt.rgs file before modifying it.
Before installing the patch ensure the processes listed above are not running. -
WPF report viewer throws exception when print button clicked when hosted on winform
When hosted in a winform app the wpf report viewer control throws an exception when the print button is clicked.
All the other buttons appear to work, any ideas on a work round?
I have created a sample VS 2013 solution that shows this issue
As I can't even attach a renamed zip file it can be downloaded directly from here: http://1drv.ms/QxUrZo
The reason I am attempting to use this control is that the standard reportviewer causes occasional errors in citrix enviroments causing the citrix session to lock up. This appears to be a relatively common issue and the usual issue of both sides (citrix & crystal) blaming the other for the cause and me the developer needs to find a work round.
I've 'bodged' in an additional button on our app to export a loaded report to file as pdf then print it but this should not be the permanent resolution.
BTW glad to see the x64 dynamic parameter issue has been fixed at last, think I reported this over two years ago and again ended up having to work round it.Hi Ludek
A sample project that loads a simple report is available from here: http://1drv.ms/QxUrZo
The project is called WPFReportHost
This loads a simple report when run then you can test the basic functionality of the viewer and all will work until you press the print button and then you get the application crash.
Have to improve my search technique when I googled for other people having this issue I didnt' find the link.
We've noticed the WPF viewer loads considerably faster and has better functionality than the winform viewer and hope that it might solve the citrix preview issue (yet to be tested).
So as a work round we've hidden the default print button added our own and call the report print directly as per below:
using (PrintDialog dialog = new PrintDialog())
dialog.AllowCurrentPage = true;
dialog.AllowSelection = true;
dialog.AllowSomePages = true;
dialog.AllowPrintToFile = true;
if (dialog.ShowDialog() == System.Windows.Forms.DialogResult.OK) {
reportDocument.PrintToPrinter(
dialog.PrinterSettings,
new System.Drawing.Printing.PageSettings(dialog.PrinterSettings);
false);
Would be nice to have a fix -
Incompatible with interface - Exception in Adapter Module
Hi Experts,
I have a custom adapter module deployed on PI 7.1. Once i post any message, i am getting below exception in CC monitoring.
Message processing failed. Cause: java.lang.ClassCastException: class $Proxy3125_10002:sap.com/ClearModule_EAR @ com.sap.engine.boot.loader.ResourceMultiParentClassLoader @ 6daa7537 @ alive incompatible with interface com.sap.aii.af.lib.mp.module.ModuleLocal:library:com.sap.aii.af.lib @ com.sap.engine.boot.loader.ResourceMultiParentClassLoader @ 15d75e80 @ alive
I used NWDS 7.1 to develop the module.
the EJB is stateless.
Can any one have any idea about the exception.
Please help me out here.
Thx in advance,
BrianHello,
i forgot to modify the four interfaces' name when i create the EJB, ie my Bean class is "ss.cod.de.EjdBean", then the "Remote Interface" & "Home Interface" are setted respectively and defaultly as "ss.cod.de.EjdRemote" & u201Css.cod.de.EjdHomeu201D, the u201CLocal Interfaceu201D & "LocalHome Interface" are the same to the two interface above.
everything was well while i rectified all the interfaces as "com.sap.aii.af.lib.mp.module.ModuleHome", "com.sap.aii.af.lib.mp.module.ModuleLocal", "com.sap.aii.af.lib.mp.module.ModuleLocalHome" and "com.sap.aii.af.lib.mp.module.ModuleRemote".
hope its help 4 u.
good luck.
thx & br,
Brian -
Fetch From UWL to WD view :UWL Exception Logged in users context or session
Hi,
We have a requirement in which , we need to fetch all UWL Items and need to display these in a webdynpro view.
We tried based on this link [Custom UWL|http://searchsap.techtarget.com/tip/0,289483,sid21_gci1240907,00.html].
Coding What I have Tried is
IWDClientUser user1 = WDClientUser.getLoggedInClientUser();
IUser epUser1 =user1.getSAPUser();
IPortalRuntimeResources runtimeResources = PortalRuntime.getRuntimeResources();
wdComponentAPI.getMessageManager().reportSuccess("Version "+PortalRuntime.getVersion());
IUWLService uwlService = (IUWLService) runtimeResources.getService(IUWLService.ALIAS_KEY);
uwlService = (IUWLService) runtimeResources.getService(IUWLService.ALIAS_KEY);
wdComponentAPI.getMessageManager().reportSuccess("6");
UWLContext uwlContext = new UWLContext();
uwlContext.setUser(epUser1);
wdComponentAPI.getMessageManager().reportSuccess(" UML Context"+uwlContext.getUserId());
wdComponentAPI.getMessageManager().reportSuccess("9");
IUWLSession uwlSess=uwlService.beginSession(uwlContext, 6000);
uwlContext.setSession(uwlSess);
wdComponentAPI.getMessageManager().reportSuccess(" UML Session"+uwlSess.getUser().getUniqueID());
IUWLItemManager itemManager = uwlService.getItemManager(uwlContext);
wdComponentAPI.getMessageManager().reportSuccess("Item manager"+itemManager.getItems(uwlContext,null,null));
QueryResult result = itemManager.getItems(uwlContext,null,null);
wdComponentAPI.getMessageManager().reportSuccess("12");
int size = result.getTotalNumberOfItems();
ItemCollection collection = result.getItems();
java.util.List list = collection.list();
Item item = null;
Date date = null;
String subject = null;
for(int i = 0; i < 5; i++)
if(!(i > (size -1)))
item = collection.get(i);
date = item.getDueDate();
subject = item.getSubject();
wdComponentAPI.getMessageManager().reportSuccess("item "+item);
wdComponentAPI.getMessageManager().reportSuccess("date "+date);
wdComponentAPI.getMessageManager().reportSuccess("subject "+subject);
But I am getting the Exception
Exp: com.sap.netweaver.bc.uwl.UWLException: Wed May 14 11:20:29 IST 2008 (Default) Logged in users context or session doesnt exist
in the line
QueryResult result = itemManager.getItems(uwlContext,null,null);
But according to first mentioned link the user is getting through Portal Request Object. In webdynpro, we were not able to get Portal request object. So we are getting the current user from UME .
So we are getting the exception.
Can anybody help me
Thanks and Regards
Smithacheck this link
Re: UWL breaks behind TAM -
Has anyone done an interface to the document management system "Doc View"? We have a need to synchronously look up documents in Doc View and return the status back to SAP. We want to know if the doc was found (Y or N) and in another interface actually pull the document back to SAP.
If you have done this kind on interface with any other sys, would appreciate knowing if it's possible thru RFC to send a list of keys to external sys and have the external sys reply with list of found docs, preferably sunchronous. They tell me they can and will write appropriate program on external sys to interface with SAP.
Thanks
NicHi,
This may be helpful.
Need info on CRM Business Content extraction
Thanks,
JituK -
4i Viewer "General exception during connect" error
4i Viewer servlet runs but with the following error --- "General exception during connect" (in the lower LH part of webpage). We're using a distributed setup: a WinNT4(sp6a)/IIS 4.0/JRun 3.0 machine and a Discoverer 4i server (WinNT4 sp6a). Plus has been tested and works (applet to EUL/db). JRun classpath is set correctly because the servlet starts. Does anyone know how to resolve this issue with the servlet connection to Discoverer services (servlet->Locator->Session)?
hi,
did you got the solution i am having same problem. -
Cant view cinemagraph except on phone
Hello,
I can't view a cibemagraph I took of my kids this weekend except on my phone. The link isn't viewable on ie8, ie10 (wp8), ie11, chrome, or Firefox. If I do a save GIF it saves a jpg, not an animated GIF on my phone. Here's a link to it: http://memories.nokia.com/en/images/059fd338-f435-4271-bfa2-f26029dc62a2You can use the Export to Gif feature of Nokia Cinemagraph to create the GIF file. But the only way I could find to access that file is, connecting the phone to the computer and copying the exported GIF to computer.
Maybe you are looking for
-
My Ipod Will Not Update or is not recognized by computer
See the problem is i had to reformat my computer recently like yesterday which was saturday 23rd 2006 because my sound wasnt wrking. I got my sound to work and uploaded all songs back to my ipod. I connect it and it says new device found in the right
-
Is there anyone who has used an HDMI splitter for Apple TV and cable box?
The HDMI port on my TV is already occupied by "cable" tv. I wanted to know if a splitter would work before I purchased one? Also should I expect the resolution to suffer because of the splitter? The only other ports available on the tv are RGB , s-
-
Designer - complex join not displayed correctly
Post Author: Jon80 CA Forum: General Feedback I've created a complex join as part of a tutorial for aggregate aware tables. So I've created a complex join as follows within the e-fashion universe: Calendar_year_lookup.Yr=Agg_yr_qt_mt_mn_wk_rg_cy_sn_
-
Headphone jack only works for right half headphones
I had connected my MacBook Pro to a set of speakers using the headphone jack. Ever since then when I use headphones the jack only outputs sound to the right side. There is no red light coming from the jack and I've also tried resetting the SMC but no
-
Controlling hidden qt audio with a normal html link.
Hello: I'm trying to achieve the following functionality on a normal web page: there is a normal html text link. clicking it starts a hidden quicktime audio player. there is no change on screen (i.e. no navigation occurs, and no player is ever visibl