Parser view interface issue

Question

Hi All
i have a problem with parser views.
i want to make a view where its only possible to change the vlan on a given port.
i have tryed a number of possibilities and now im ready to give up .
when i make the view i have to define every gigabit or Fastethernet port, i need a command that can allow access to all gigabitethernet ports without giving them access to execute all comannds in interface config.
my view looks like this
parser view int
 secret 5 $1$ZPxG$PZ.izEXhrKjTYPZVhuldu1
 commands interface include switchport
 commands configure include interface
 commands exec include-exclusive configure terminal
 commands exec include configure
if i want to allow access to an interface port i need to add 
 commands configure include interface gigabitethernet1/0/1
and i rather not add all 28 ports i that manner, is there  a command that fixes my problem?

Answer 1

DETAILED STEPS
Command or Action
Purpose
Step 1
enable view
Example:Router> enable view  
Enables root view. Enter your privilege level 15 password (for example, root password) if prompted.  
Step 2
configure terminal
Example:Router# configure terminal  
Enters global configuration mode.
Step 3
parser view view-name
Example:Router(config)# parser view first  
Creates a view and enters view configuration mode.
Step 4
secret 5 encrypted-password
Example:Router(config-view)# secret 5 secret  
Associates a command-line interface (CLI) view or superview with a password.
Note   
You must issue this command before you can configure additional attributes for the view.
Step 5
commands parser-mode {include | include-exclusive | exclude} [all] [interface interface-name | command]
Example:Router(config-view)# commands exec include show version  
Adds commands or interfaces to a view.
parser-mode --The mode in which the specified command exists.
include --Adds a command or an interface to the view and allows the same command or interface to be added to an additional view.
include-exclusive --Adds a command or an interface to the view and excludes the same command or interface from being added to all other views.
exclude --Excludes a command or an interface from the view; that is, customers cannot access a command or an interface.
all --A "wildcard" that allows every command in a specified configuration mode that begins with the same keyword or every subinterface for a specified interface to be part of the view.
interface interface-name -- Interface that is added to the view.
command --Command that is added to the view.
Step 6
exit
Example:Router(config-view)# exit  
Exits view configuration mode.
Step 7
exit
Example:Router(config)# exit  
Exits global configuration mode.
Step 8
enable [privilege-level] [view view-name
Example:Router# enable view first  
Prompts the user for a password, which allows the user to access a configured CLI view, and is used to switch from one view to another view.
After the correct password is given, the user can access the view.
Step 9
show parser view all
Example:Router# show parser view  
(Optional) Displays information about the view that the user is currently in.
all --Displays information for all views that are configured on the router.
Note   
Although this command is available for both root and lawful intercept users, the all keyword is available only to root users. However, the all keyword can be configured by a user in root view to be available for users in lawful intercept view and CLI view.