When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Similar Messages

  • During installation of the NI-VISA 2.01 driver I get an error that tells me that my file (NICVISA.DPT) doesnt look like a tar archive. How can I make it look like a tar archive or is that not the solution to the problem?

    I am trying to install the NI-VISA 2.01 driver I downloaded from the NI website on a HP-UX 10.2 platform, but it keeps giving me the following error:
    tar: /var/spool/sw/NICVISA.DPT: This doesnt look like a tar archive.
    I also get errors telling me that files can't be loaded because their missing from source media. What could be causing this? Some of the files are msgrt4.txt,ni7seg24.bdf,ni7seg26, etc... Can these needed files be downloaded anywhere or is the problem linked to the tar archive scenario..

    The files were corrupt. Originally I had downloaded the driver files to my PC and used FTP to transfer them to my UNIX machine.
    Your tech support rep. suggested I download the driver files via ftp.ni.com to my UNIX machine vs. the PC...this worked great. I am now communicating with my instrument

  • When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    I just found the solution!
    Niel
    Re: Why is my Finder window popping up when I open my Safari window? 
    Jan 20, 2008 7:58 PM (in response to alak)
    Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252) 
    iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

  • Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdow

    Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdowCan't

    There are some keyboard commands (shortcuts) you can use instead of having to go to the Apple menu -
    Control-Eject          This brings up the Restart-Sleep-Cancel-Shutdown window.
    Command-Option-Eject          This puts the machine to sleep.
    Command-Control-Eject          This closes all apps and restarts the machine.
    Command-Option-Control-Eject          This closes all apps and shuts the machine down.

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! No Finder window opens up and the spotlight dropdown menu just shuts! Please help!

    When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! NO Finder window opens up and the spotlight dropdown menu just shuts! Please help!

    I'm having the same problem in other places as well, for example when i downloaded Easyfind right now, clicking the small magnifying glass button on the right of the file name (shown below) would usually open up finder highlighting the file, but now nothing happens when i click on that button!
    Is there a solution for this, as this was a very useful feature which i used ALL the time?

  • How do I keep icons from moving around when I close the finder window and reopen?

    I am working in one finder window, and every time I arrange the icons the way I want them, they decide to shift around on their own when I open the window again.  How can I set the icons where I want and then keep them that way?

    Hi,
    This may happen if the PDF is opened inside the browser by the PDF plugin.
    In '''Tools''' ( or '''Alt''' + '''T''') > '''Options''' > '''Applications''' look for or type PDF in the search box and for the '''Action''' on the right change it to '''Save File''' or click '''Use other...''' and browse to the PDF main exe and select.
    Please see [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Applications%20panel this] and [https://support.mozilla.com/en-US/kb/Managing%20file%20types this.]
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

  • When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

    When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

    Hey sunnyday7!
    Here is an article that can help you address this issue:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Additional Information
    OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • What is the need of creating partner functions for sales document type.

    Hi SAP (SD-GURUS),
    Actually we create partner functions  before creating customer ex: sold to party, ship to party, bill to party, and payer.
    These partner functions are going to be copied into sales order while processing sales order.
    Again what is the need of creating partner functions for sales document type.
    Thanks&Regards
    sreenivas peruru

    There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
    Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
    So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
    Hope this helps...
    THanks,
    Jignesh Mehta

  • HT2509 I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

    I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

    Font Management in OS X

  • I can't make purchases with my Apple ID becuase I don't know the security questions and the reset password is old and doesn't exist anymore. What should I do?

    I can't make purchases with my Apple ID becuase I don't know the security questions and the reset password is old and doesn't exist anymore. What should I do?

    Per the quote below from If you forgot the answers to your Apple ID security questions - Apple Support
    contact: Apple ID: Contacting Apple for help with Apple ID account security - Apple Support
    If you can't reset your security questions
    Contact Apple Support in either of these circumstances:
    You don't see the link to send a reset email, which means you don't have a rescue address.
    You see the link to send a reset email, but you don't have access to email at the rescue address.

  • Multiple drag emails from Mail to a finder window and for it to name the files as the subject heading

    Hi
    I have been using Mac's now for about 10 years and this is my first problem.
    I have recently moved into an office that use PC's with a Windows server.
    I have set up the network to transfer files and view the windows server and it  works fine.
    I have a problem in that my colleagues on PC need to be able to view my emails which I send and receive using Mail. They therefore need to have logical title names and the date sent and ideally who to or from. I view them and archive them using Mail which is fine for me.
    I understand about the archiving and copying of mailboxes but this gives every email the un-fathomable title name 9944847 etc.
    I can get round the problem by dragging and dropping every email I send and receive individually and it will automatically give it a more logical title of the subject heading however the date is when it was dragged not when sent. This is a pain if I am away or forget to save an email for a day or two and then the date is inconsistent.
    Is there a way to batch copy emails from Mail to a finder window and for it to name the files as the subject heading or to archive the files in a similar way so they retain the detailed information my colleagues require.
    And no I can not get to all change to Mac and I don't really fancy using Outlook, Entourage or Parallels.
    Please help.
    Toby

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the text on the line below to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in.

  • How can we make quick time player play all formats like AVI, MKV, MPEG etc?

    How can we make quick time player play all formats like AVI, MKV, MPEG etc?

    QuickTime supports many different file types & codecs, but not all.   In many cases you can lookup, download & install specific codecs if you need them.
    The following may be helpful:
    Perian
    QuickTime: About Playing AVI Files
    QuickTime X: Playback of MPEG2 video
    QuickTime 7.6.6  (you may need this if QT X won't play old videos)
    QuickTime MPEG2 Playback Component (for QT 7.x)
    Windows Media Components for QuickTime
    Flip4Mac Player/Pro/Studio/StudioProHD

  • TS1702 Please can't make FaceTime for free for all iMac it's mean Apple can't make face time for free for snow leopard ?

    Please can't make FaceTime for free for all iMac it's mean Apple can't make face time for free for snow leopard ?

    did Yamaha/Apogee ever work out the problem that you couldn't use mLAN drivers for the XS (it's not really mLAN, it's "based on" right?) and Apogee drivers at the same time?
    I think Yamaha has updated their drivers twice since you and I last exchanged ideas on this.
    You've got killer hardware, and while I'm sure it's possible to set up an XS to send MTC and for Logic 8 to deal with correctly, it's just backwards of the way I use (almost) the same tools. My experience is the same, control Logic from the Motif, only it's so much more than just stop/start, and locate. Your XS is made to be a remote controller for Logic, sliders, transport controls, even the info for tracks and plug-ins (in Logic!) show up on your XS display and you can do plenty without touching the keyboard or mouse... Besides the sound of the Motifs, they're just great at doing this kind of stuff too... I personally wouldn't consider anything else...
    I don't want to send you down a path that won't work if the two vendors in question haven't solved this yet, but... I want to help you but deep inside I think you're approaching your top-of-the-line gear backwards...
    of course, if this is still a vendor incompatibility thing... then you have no choice.
    pages 839 (the graphic is on page 838) of the Logic user manual under "listen to MMC input" describes what you need to set in Logic 8 to make this work. Since I don't have an XS, I can't point you to the correct pages for that.
    I really hope you can get this to work.
    Michael

  • The value should be set for Base image URL and Image file directory

    Hi experts
    Now customer has the following issue.
    XML Publisher concurrent request, using RTF layout template with LOGO, does not generate the LOGO for Excel output.
    but in output formats PDF, it is shown normally.
    from the debug log, we can found the following error message
    ======
    [051812_054716051][][ERROR] Could not create an image. Set html-image-dir and html-image-base-uri correctly.
    ======
    so I tell the customer to do the following action plan.
    1. in XML Publisher Administrator resp > Administration expand the HTML Output section.
    2a. enter a value for 'Base image URI'
    2b. enter a value for 'Image file directory'
    Customer set the value as following and retest this issue,but he found the issue is not solved.
    Base image URI: /u01/r12/ebssnd/apps/apps_st/comn/java/classes/oracle/apps/media/XXSLI_SONY_LIFE_LOGO.gif
    Image file directory: /u01/r12/ebssnd/apps/apps_st/comn/java/classes/oracle/apps/media
    I verified 'Base image URI' and 'Image file directory' settings:
    1) Change output type to HTML.
    2) Click the Preview.
    but the image is correctly displayed on HTML, so I think the issue is caused by user's uncorrectly setting of the base image URL and/or image file directory
    but could anyone give me some advice on which value should be set for Base image URL and Image file directory
    Regards
    shuangfei

    First thing to do is to edit the post and use some tags to format the code as it is unreadable and too much!
    Read the FAQ (https://forums.oracle.com/forums/help.jspa) to find out how to do this.
    Next we need to know the jdev version you are using!
    As the code is generated I would first try to generate it again after the db change.
    Timo

Maybe you are looking for